From: Richard Henderson <rth@twiddle.net>
To: malc <av1474@comtv.ru>
Cc: qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] TCG sar UB (fwd)
Date: Sun, 04 Sep 2011 07:57:32 +0530 [thread overview]
Message-ID: <4E62E214.4080400@twiddle.net> (raw)
In-Reply-To: <alpine.LNX.2.00.1109031417430.1511@linmac>
On 09/03/2011 03:47 PM, malc wrote:
> Doesn't make much sense to me, guest clearly asked for 0 and not -1,
> besides -1 violates TCG's sar constraints and PPC obliges by emiting
> illegal instruction in this case.
The shift that the guest asked for was completely folded away.
The -1 comes from gen_shift_rm_T1 in the computation of the new
flags value. This could instead be moved inside the test for != 0,
which is the only place that value is actually used anyway.
Try this. Lightly tested.
r~
diff --git a/target-i386/translate.c b/target-i386/translate.c
index ccef381..b966762 100644
--- a/target-i386/translate.c
+++ b/target-i386/translate.c
@@ -1406,70 +1406,84 @@ static void gen_shift_rm_T1(DisasContext *s, int ot, int op1,
{
target_ulong mask;
int shift_label;
- TCGv t0, t1;
+ TCGv t0, t1, t2;
- if (ot == OT_QUAD)
+ if (ot == OT_QUAD) {
mask = 0x3f;
- else
+ } else {
mask = 0x1f;
+ }
/* load */
- if (op1 == OR_TMP0)
+ if (op1 == OR_TMP0) {
gen_op_ld_T0_A0(ot + s->mem_index);
- else
+ } else {
gen_op_mov_TN_reg(ot, 0, op1);
+ }
- tcg_gen_andi_tl(cpu_T[1], cpu_T[1], mask);
+ t0 = tcg_temp_local_new();
+ t1 = tcg_temp_local_new();
+ t2 = tcg_temp_local_new();
- tcg_gen_addi_tl(cpu_tmp5, cpu_T[1], -1);
+ tcg_gen_andi_tl(t2, cpu_T[1], mask);
if (is_right) {
if (is_arith) {
gen_exts(ot, cpu_T[0]);
- tcg_gen_sar_tl(cpu_T3, cpu_T[0], cpu_tmp5);
- tcg_gen_sar_tl(cpu_T[0], cpu_T[0], cpu_T[1]);
+ tcg_gen_mov_tl(t0, cpu_T[0]);
+ tcg_gen_sar_tl(cpu_T[0], cpu_T[0], t2);
} else {
gen_extu(ot, cpu_T[0]);
- tcg_gen_shr_tl(cpu_T3, cpu_T[0], cpu_tmp5);
- tcg_gen_shr_tl(cpu_T[0], cpu_T[0], cpu_T[1]);
+ tcg_gen_mov_tl(t0, cpu_T[0]);
+ tcg_gen_shr_tl(cpu_T[0], cpu_T[0], t2);
}
} else {
- tcg_gen_shl_tl(cpu_T3, cpu_T[0], cpu_tmp5);
- tcg_gen_shl_tl(cpu_T[0], cpu_T[0], cpu_T[1]);
+ tcg_gen_mov_tl(t0, cpu_T[0]);
+ tcg_gen_shl_tl(cpu_T[0], cpu_T[0], t2);
}
/* store */
- if (op1 == OR_TMP0)
+ if (op1 == OR_TMP0) {
gen_op_st_T0_A0(ot + s->mem_index);
- else
+ } else {
gen_op_mov_reg_T0(ot, op1);
-
+ }
+
/* update eflags if non zero shift */
- if (s->cc_op != CC_OP_DYNAMIC)
+ if (s->cc_op != CC_OP_DYNAMIC) {
gen_op_set_cc_op(s->cc_op);
+ }
- /* XXX: inefficient */
- t0 = tcg_temp_local_new();
- t1 = tcg_temp_local_new();
-
- tcg_gen_mov_tl(t0, cpu_T[0]);
- tcg_gen_mov_tl(t1, cpu_T3);
+ tcg_gen_mov_tl(t1, cpu_T[0]);
shift_label = gen_new_label();
- tcg_gen_brcondi_tl(TCG_COND_EQ, cpu_T[1], 0, shift_label);
+ tcg_gen_brcondi_tl(TCG_COND_EQ, t2, 0, shift_label);
- tcg_gen_mov_tl(cpu_cc_src, t1);
- tcg_gen_mov_tl(cpu_cc_dst, t0);
- if (is_right)
+ tcg_gen_addi_tl(t2, t2, -1);
+ tcg_gen_mov_tl(cpu_cc_dst, t1);
+
+ if (is_right) {
+ if (is_arith) {
+ tcg_gen_sar_tl(cpu_cc_src, t0, t2);
+ } else {
+ tcg_gen_shr_tl(cpu_cc_src, t0, t2);
+ }
+ } else {
+ tcg_gen_shl_tl(cpu_cc_src, t0, t2);
+ }
+
+ if (is_right) {
tcg_gen_movi_i32(cpu_cc_op, CC_OP_SARB + ot);
- else
+ } else {
tcg_gen_movi_i32(cpu_cc_op, CC_OP_SHLB + ot);
-
+ }
+
gen_set_label(shift_label);
s->cc_op = CC_OP_DYNAMIC; /* cannot predict flags after */
tcg_temp_free(t0);
tcg_temp_free(t1);
+ tcg_temp_free(t2);
}
static void gen_shift_rm_im(DisasContext *s, int ot, int op1, int op2,
next parent reply other threads:[~2011-09-04 2:28 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <alpine.LNX.2.00.1109031417430.1511@linmac>
2011-09-04 2:27 ` Richard Henderson [this message]
2011-09-04 2:33 ` [Qemu-devel] TCG sar UB (fwd) malc
2011-09-06 14:48 ` Richard Henderson
2011-09-06 15:20 ` malc
2011-09-07 5:19 ` Richard Henderson
2011-09-07 16:04 ` malc
2011-09-08 8:23 ` [Qemu-devel] [PATCH] target-i386: Compute all flag data inside %cl != 0 test Richard Henderson
2011-09-08 14:12 ` malc
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E62E214.4080400@twiddle.net \
--to=rth@twiddle.net \
--cc=av1474@comtv.ru \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).