From: Jan Kiszka <jan.kiszka@siemens.com>
To: qemu-devel <qemu-devel@nongnu.org>
Cc: Blue Swirl <blauwirbel@gmail.com>,
Aurelien Jarno <aurelien@aurel32.net>,
Richard Henderson <rth@twiddle.net>
Subject: [Qemu-devel] [PATCH v4] tcg-i386: Introduce limited deposit support
Date: Thu, 29 Sep 2011 18:52:11 +0200 [thread overview]
Message-ID: <4E84A23B.2030405@siemens.com> (raw)
In-Reply-To: <4E8498BD.10800@twiddle.net>
On 2011-09-29 18:11, Richard Henderson wrote:
> On 09/29/2011 08:23 AM, Jan Kiszka wrote:
>> +#ifndef TCG_TARGET_deposit_i32_valid
>> +#define TCG_TARGET_deposit_i32_valid(ofs, len) 0
>> +#endif
>> +#ifndef TCG_TARGET_deposit_i64_valid
>> +#define TCG_TARGET_deposit_i64_valid(ofs, len) 0
>> +#endif
>
> Err, no. The default is true. The targets that currently
> implement deposit at present can handle arbitrary inputs.
Grr, of course.
---
x86 cannot provide an optimized generic deposit implementation. But at
least for a few special cases, namely for writing bits 0..7, 8..15, and
0..15, versions using only a single instruction are feasible.
Introducing such limited support improves emulating 16-bit x86 code on
x86, but also rarer cases where 32-bit or 64-bit code accesses bytes or
words.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
Changes in v4:
- provide correct default TCG_TARGET_deposit_i32_valid
Changes in v3:
- provide default TCG_TARGET_deposit_i32_valid - just in case
Changes in v2:
- introduce restricting predicates TCG_TARGET_deposit_i32/64_valid
to decide if deposit support can be used
- express register constraints via new 'Q' symbol
tcg/i386/tcg-target.c | 24 ++++++++++++++++++++++++
tcg/i386/tcg-target.h | 9 +++++++--
tcg/tcg-op.h | 4 ++--
tcg/tcg.h | 7 +++++++
4 files changed, 40 insertions(+), 4 deletions(-)
diff --git a/tcg/i386/tcg-target.c b/tcg/i386/tcg-target.c
index 281f87d..3069e53 100644
--- a/tcg/i386/tcg-target.c
+++ b/tcg/i386/tcg-target.c
@@ -168,6 +168,10 @@ static int target_parse_constraint(TCGArgConstraint *ct, const char **pct_str)
tcg_regset_set32(ct->u.regs, 0, 0xf);
}
break;
+ case 'Q':
+ ct->ct |= TCG_CT_REG;
+ tcg_regset_set32(ct->u.regs, 0, 0xf);
+ break;
case 'r':
ct->ct |= TCG_CT_REG;
if (TCG_TARGET_REG_BITS == 64) {
@@ -1747,6 +1751,22 @@ static inline void tcg_out_op(TCGContext *s, TCGOpcode opc,
break;
#endif
+ OP_32_64(deposit):
+ if (args[3] == 0 && args[4] == 8) {
+ /* load bits 0..7 */
+ tcg_out_modrm(s, OPC_MOVB_EvGv | P_REXB_R | P_REXB_RM,
+ args[2], args[0]);
+ } else if (args[3] == 8 && args[4] == 8) {
+ /* load bits 8..15 */
+ tcg_out_modrm(s, OPC_MOVB_EvGv, args[2], args[0] + 4);
+ } else if (args[3] == 0 && args[4] == 16) {
+ /* load bits 0..15 */
+ tcg_out_modrm(s, OPC_MOVL_EvGv | P_DATA16, args[2], args[0]);
+ } else {
+ tcg_abort();
+ }
+ break;
+
default:
tcg_abort();
}
@@ -1802,6 +1822,8 @@ static const TCGTargetOpDef x86_op_defs[] = {
{ INDEX_op_setcond_i32, { "q", "r", "ri" } },
+ { INDEX_op_deposit_i32, { "Q", "0", "Q" } },
+
#if TCG_TARGET_REG_BITS == 32
{ INDEX_op_mulu2_i32, { "a", "d", "a", "r" } },
{ INDEX_op_add2_i32, { "r", "r", "0", "1", "ri", "ri" } },
@@ -1853,6 +1875,8 @@ static const TCGTargetOpDef x86_op_defs[] = {
{ INDEX_op_ext8u_i64, { "r", "r" } },
{ INDEX_op_ext16u_i64, { "r", "r" } },
{ INDEX_op_ext32u_i64, { "r", "r" } },
+
+ { INDEX_op_deposit_i64, { "Q", "0", "Q" } },
#endif
#if TCG_TARGET_REG_BITS == 64
diff --git a/tcg/i386/tcg-target.h b/tcg/i386/tcg-target.h
index 5088e47..b9c9d4e 100644
--- a/tcg/i386/tcg-target.h
+++ b/tcg/i386/tcg-target.h
@@ -90,7 +90,7 @@ enum {
#define TCG_TARGET_HAS_eqv_i32 0
#define TCG_TARGET_HAS_nand_i32 0
#define TCG_TARGET_HAS_nor_i32 0
-#define TCG_TARGET_HAS_deposit_i32 0
+#define TCG_TARGET_HAS_deposit_i32 1
#if TCG_TARGET_REG_BITS == 64
#define TCG_TARGET_HAS_div2_i64 1
@@ -111,9 +111,14 @@ enum {
#define TCG_TARGET_HAS_eqv_i64 0
#define TCG_TARGET_HAS_nand_i64 0
#define TCG_TARGET_HAS_nor_i64 0
-#define TCG_TARGET_HAS_deposit_i64 0
+#define TCG_TARGET_HAS_deposit_i64 1
#endif
+#define TCG_TARGET_deposit_i32_valid(ofs, len) \
+ (((ofs) == 0 && (len) == 8) || ((ofs) == 8 && (len) == 8) || \
+ ((ofs) == 0 && (len) == 16))
+#define TCG_TARGET_deposit_i64_valid TCG_TARGET_deposit_i32_valid
+
#define TCG_TARGET_HAS_GUEST_BASE
/* Note: must be synced with dyngen-exec.h */
diff --git a/tcg/tcg-op.h b/tcg/tcg-op.h
index 404b637..fea5983 100644
--- a/tcg/tcg-op.h
+++ b/tcg/tcg-op.h
@@ -2045,7 +2045,7 @@ static inline void tcg_gen_deposit_i32(TCGv_i32 ret, TCGv_i32 arg1,
TCGv_i32 arg2, unsigned int ofs,
unsigned int len)
{
- if (TCG_TARGET_HAS_deposit_i32) {
+ if (TCG_TARGET_HAS_deposit_i32 && TCG_TARGET_deposit_i32_valid(ofs, len)) {
tcg_gen_op5ii_i32(INDEX_op_deposit_i32, ret, arg1, arg2, ofs, len);
} else {
uint32_t mask = (1u << len) - 1;
@@ -2064,7 +2064,7 @@ static inline void tcg_gen_deposit_i64(TCGv_i64 ret, TCGv_i64 arg1,
TCGv_i64 arg2, unsigned int ofs,
unsigned int len)
{
- if (TCG_TARGET_HAS_deposit_i64) {
+ if (TCG_TARGET_HAS_deposit_i64 && TCG_TARGET_deposit_i64_valid(ofs, len)) {
tcg_gen_op5ii_i64(INDEX_op_deposit_i64, ret, arg1, arg2, ofs, len);
} else {
uint64_t mask = (1ull << len) - 1;
diff --git a/tcg/tcg.h b/tcg/tcg.h
index dc5e9c9..c7197f5 100644
--- a/tcg/tcg.h
+++ b/tcg/tcg.h
@@ -71,6 +71,13 @@ typedef uint64_t TCGRegSet;
#define TCG_TARGET_HAS_deposit_i64 0
#endif
+#ifndef TCG_TARGET_deposit_i32_valid
+#define TCG_TARGET_deposit_i32_valid(ofs, len) 1
+#endif
+#ifndef TCG_TARGET_deposit_i64_valid
+#define TCG_TARGET_deposit_i64_valid(ofs, len) 1
+#endif
+
/* Only one of DIV or DIV2 should be defined. */
#if defined(TCG_TARGET_HAS_div_i32)
#define TCG_TARGET_HAS_div2_i32 0
--
1.7.3.4
next prev parent reply other threads:[~2011-09-29 16:52 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-28 12:28 [Qemu-devel] [PATCH] tcg-i386: Introduce specific deposit helpers Jan Kiszka
2011-09-28 14:26 ` Richard Henderson
2011-09-28 14:33 ` Jan Kiszka
2011-09-28 15:19 ` Richard Henderson
2011-09-28 22:07 ` Jan Kiszka
2011-09-28 22:47 ` Richard Henderson
2011-09-29 11:31 ` [Qemu-devel] [PATCH v2] tcg-i386: Introduce limited deposit support Jan Kiszka
2011-09-29 14:58 ` Richard Henderson
2011-09-29 15:19 ` Jan Kiszka
2011-09-29 15:23 ` [Qemu-devel] [PATCH v3] " Jan Kiszka
2011-09-29 16:11 ` Richard Henderson
2011-09-29 16:52 ` Jan Kiszka [this message]
2011-09-29 19:50 ` [Qemu-devel] [PATCH v4] " Richard Henderson
2011-10-01 12:06 ` Blue Swirl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E84A23B.2030405@siemens.com \
--to=jan.kiszka@siemens.com \
--cc=aurelien@aurel32.net \
--cc=blauwirbel@gmail.com \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).