qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Anthony Liguori <aliguori@us.ibm.com>
To: Jan Kiszka <jan.kiszka@siemens.com>
Cc: qemu-devel <qemu-devel@nongnu.org>
Subject: Re: [Qemu-devel] [PATCH 1/2] pcnet: Move BCR defines to header
Date: Tue, 01 Nov 2011 17:18:17 -0500	[thread overview]
Message-ID: <4EB07029.9050700@us.ibm.com> (raw)
In-Reply-To: <4E80AFF8.8000107@siemens.com>

On 09/26/2011 12:01 PM, Jan Kiszka wrote:
> This moves BCR defines to the common header and immediately makes use of
> them to add BCR_APROMWE, replacing the open-coded write check in
> pcnet_aprom_writeb.
>
> Signed-off-by: Jan Kiszka<jan.kiszka@siemens.com>

Applied both.  Thanks.

Regards,

Anthony Liguori

> ---
>   hw/pcnet-pci.c |    4 ++--
>   hw/pcnet.c     |   18 ------------------
>   hw/pcnet.h     |   19 +++++++++++++++++++
>   3 files changed, 21 insertions(+), 20 deletions(-)
>
> diff --git a/hw/pcnet-pci.c b/hw/pcnet-pci.c
> index fb2a00c..ca548bd 100644
> --- a/hw/pcnet-pci.c
> +++ b/hw/pcnet-pci.c
> @@ -55,9 +55,9 @@ static void pcnet_aprom_writeb(void *opaque, uint32_t addr, uint32_t val)
>   #ifdef PCNET_DEBUG
>       printf("pcnet_aprom_writeb addr=0x%08x val=0x%02x\n", addr, val);
>   #endif
> -    /* Check APROMWE bit to enable write access */
> -    if (pcnet_bcr_readw(s,2)&  0x100)
> +    if (BCR_APROMWE(s)) {
>           s->prom[addr&  15] = val;
> +    }
>   }
>
>   static uint32_t pcnet_aprom_readb(void *opaque, uint32_t addr)
> diff --git a/hw/pcnet.c b/hw/pcnet.c
> index cf16fd4..add3ec2 100644
> --- a/hw/pcnet.c
> +++ b/hw/pcnet.c
> @@ -58,24 +58,6 @@ struct qemu_ether_header {
>       uint16_t ether_type;
>   };
>
> -/* BUS CONFIGURATION REGISTERS */
> -#define BCR_MSRDA    0
> -#define BCR_MSWRA    1
> -#define BCR_MC       2
> -#define BCR_LNKST    4
> -#define BCR_LED1     5
> -#define BCR_LED2     6
> -#define BCR_LED3     7
> -#define BCR_FDC      9
> -#define BCR_BSBC     18
> -#define BCR_EECAS    19
> -#define BCR_SWS      20
> -#define BCR_PLAT     22
> -
> -#define BCR_DWIO(S)      !!((S)->bcr[BCR_BSBC]&  0x0080)
> -#define BCR_SSIZE32(S)   !!((S)->bcr[BCR_SWS ]&  0x0100)
> -#define BCR_SWSTYLE(S)     ((S)->bcr[BCR_SWS ]&  0x00FF)
> -
>   #define CSR_INIT(S)      !!(((S)->csr[0])&0x0001)
>   #define CSR_STRT(S)      !!(((S)->csr[0])&0x0002)
>   #define CSR_STOP(S)      !!(((S)->csr[0])&0x0004)
> diff --git a/hw/pcnet.h b/hw/pcnet.h
> index cd86bde..52cc52e 100644
> --- a/hw/pcnet.h
> +++ b/hw/pcnet.h
> @@ -6,6 +6,25 @@
>
>   #include "memory.h"
>
> +/* BUS CONFIGURATION REGISTERS */
> +#define BCR_MSRDA    0
> +#define BCR_MSWRA    1
> +#define BCR_MC       2
> +#define BCR_LNKST    4
> +#define BCR_LED1     5
> +#define BCR_LED2     6
> +#define BCR_LED3     7
> +#define BCR_FDC      9
> +#define BCR_BSBC     18
> +#define BCR_EECAS    19
> +#define BCR_SWS      20
> +#define BCR_PLAT     22
> +
> +#define BCR_APROMWE(S)   !!((S)->bcr[BCR_MC  ]&  0x0100)
> +#define BCR_DWIO(S)      !!((S)->bcr[BCR_BSBC]&  0x0080)
> +#define BCR_SSIZE32(S)   !!((S)->bcr[BCR_SWS ]&  0x0100)
> +#define BCR_SWSTYLE(S)     ((S)->bcr[BCR_SWS ]&  0x00FF)
> +
>   typedef struct PCNetState_st PCNetState;
>
>   struct PCNetState_st {

      reply	other threads:[~2011-11-01 22:19 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-09-26 17:01 [Qemu-devel] [PATCH 1/2] pcnet: Move BCR defines to header Jan Kiszka
2011-11-01 22:18 ` Anthony Liguori [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4EB07029.9050700@us.ibm.com \
    --to=aliguori@us.ibm.com \
    --cc=jan.kiszka@siemens.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).