qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Zang Hongyong <zanghongyong@huawei.com>
To: Cam Macdonell <cam@cs.ualberta.ca>
Cc: wusongwei@huawei.com, kvm@vger.kernel.org, hanweidong@huawei.com,
	wuchangyi@huawei.com, qemu-devel@nongnu.org,
	xiaowei.yang@huawei.com, james.chenjiabo@huawei.com,
	louzhengwei@huawei.com, avi@redhat.com
Subject: Re: [Qemu-devel] [PATCH v2] ivshmem: add a new PIO BAR3(Doorbell) besides MMIO BAR0 to reduce notification time
Date: Tue, 29 Nov 2011 15:02:55 +0800	[thread overview]
Message-ID: <4ED4839F.1070907@huawei.com> (raw)
In-Reply-To: <CAKjmthJrfwXyJncjOwsy0snjm4nF+f_=ggxck6u40yfesrPBOQ@mail.gmail.com>

于 2011/11/29,星期二 14:38, Cam Macdonell 写道:
> On Thu, Nov 17, 2011 at 10:50 PM,<zanghongyong@huawei.com>  wrote:
>> From: Hongyong Zang<zanghongyong@huawei.com>
>>
>> This patch, adds a PIO BAR3 for guest notifying qemu. And we find the new notification way of PIO BAR3 reduces 30% time in comparison with the original MMIO BAR0 way.
> Come to think of it, should we bump the PIO to BAR4 so that the shared
> memory region could be made a 64-bit BAR and therefore take up BAR2
> and BAR3?
OK. The PIO BAR can be placed on BAR4. We'll finish the patch later.

Regards,
Hongyong
>> Signed-off-by: Hongyong Zang<zanghongyong@huawei.com>
>> ---
>>   hw/ivshmem.c |   24 ++++++++++++++++++++++--
>>   kvm-all.c    |   23 +++++++++++++++++++++++
>>   kvm.h        |    1 +
>>   3 files changed, 46 insertions(+), 2 deletions(-)
>>
>> diff --git a/hw/ivshmem.c b/hw/ivshmem.c
>> index 242fbea..031cdd8 100644
>> --- a/hw/ivshmem.c
>> +++ b/hw/ivshmem.c
>> @@ -29,6 +29,7 @@
>>   #define IVSHMEM_MASTER  1
>>
>>   #define IVSHMEM_REG_BAR_SIZE 0x100
>> +#define IVSHIO_REG_BAR_SIZE 0x10
>>
>>   //#define DEBUG_IVSHMEM
>>   #ifdef DEBUG_IVSHMEM
>> @@ -57,8 +58,10 @@ typedef struct IVShmemState {
>>      CharDriverState **eventfd_chr;
>>      CharDriverState *server_chr;
>>      MemoryRegion ivshmem_mmio;
>> +    MemoryRegion ivshmem_pio;
>>
>>      pcibus_t mmio_addr;
>> +    pcibus_t pio_addr;
>>      /* We might need to register the BAR before we actually have the memory.
>>       * So prepare a container MemoryRegion for the BAR immediately and
>>       * add a subregion when we have the memory.
>> @@ -234,7 +237,7 @@ static uint64_t ivshmem_io_read(void *opaque, target_phys_addr_t addr,
>>      return ret;
>>   }
>>
>> -static const MemoryRegionOps ivshmem_mmio_ops = {
>> +static const MemoryRegionOps ivshmem_io_ops = {
>>      .read = ivshmem_io_read,
>>      .write = ivshmem_io_write,
>>      .endianness = DEVICE_NATIVE_ENDIAN,
>> @@ -348,6 +351,8 @@ static void close_guest_eventfds(IVShmemState *s, int posn)
>>      for (i = 0; i<  guest_curr_max; i++) {
>>          kvm_set_ioeventfd_mmio_long(s->peers[posn].eventfds[i],
>>                      s->mmio_addr + DOORBELL, (posn<<  16) | i, 0);
>> +        kvm_set_ioeventfd_pio_long(s->peers[posn].eventfds[i],
>> +                    s->pio_addr + DOORBELL, (posn<<  16) | i, 0);
>>          close(s->peers[posn].eventfds[i]);
>>      }
>>
>> @@ -367,6 +372,12 @@ static void setup_ioeventfds(IVShmemState *s) {
>>                                        true,
>>                                        (i<<  16) | j,
>>                                        s->peers[i].eventfds[j]);
>> +            memory_region_add_eventfd(&s->ivshmem_pio,
>> +                                      DOORBELL,
>> +                                      4,
>> +                                      true,
>> +                                      (i<<  16) | j,
>> +                                      s->peers[i].eventfds[j]);
>>          }
>>      }
>>   }
>> @@ -495,6 +506,10 @@ static void ivshmem_read(void *opaque, const uint8_t * buf, int flags)
>>                          (incoming_posn<<  16) | guest_max_eventfd, 1)<  0) {
>>              fprintf(stderr, "ivshmem: ioeventfd not available\n");
>>          }
>> +        if (kvm_set_ioeventfd_pio_long(incoming_fd, s->pio_addr + DOORBELL,
>> +                        (incoming_posn<<  16) | guest_max_eventfd, 1)<  0) {
>> +            fprintf(stderr, "ivshmem: ioeventfd not available\n");
>> +        }
>>      }
>>
>>      return;
>> @@ -656,8 +671,10 @@ static int pci_ivshmem_init(PCIDevice *dev)
>>
>>      s->shm_fd = 0;
>>
>> -    memory_region_init_io(&s->ivshmem_mmio,&ivshmem_mmio_ops, s,
>> +    memory_region_init_io(&s->ivshmem_mmio,&ivshmem_io_ops, s,
>>                            "ivshmem-mmio", IVSHMEM_REG_BAR_SIZE);
>> +    memory_region_init_io(&s->ivshmem_pio,&ivshmem_io_ops, s,
>> +                          "ivshmem-pio", IVSHIO_REG_BAR_SIZE);
>>
>>      if (ivshmem_has_feature(s, IVSHMEM_IOEVENTFD)) {
>>          setup_ioeventfds(s);
>> @@ -666,6 +683,8 @@ static int pci_ivshmem_init(PCIDevice *dev)
>>      /* region for registers*/
>>      pci_register_bar(&s->dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY,
>>                       &s->ivshmem_mmio);
>> +    pci_register_bar(&s->dev, 3, PCI_BASE_ADDRESS_SPACE_IO,
>> +&s->ivshmem_pio);
>>
>>      memory_region_init(&s->bar, "ivshmem-bar2-container", s->ivshmem_size);
>>
>> @@ -742,6 +761,7 @@ static int pci_ivshmem_uninit(PCIDevice *dev)
>>      IVShmemState *s = DO_UPCAST(IVShmemState, dev, dev);
>>
>>      memory_region_destroy(&s->ivshmem_mmio);
>> +    memory_region_destroy(&s->ivshmem_pio);
>>      memory_region_del_subregion(&s->bar,&s->ivshmem);
>>      memory_region_destroy(&s->ivshmem);
>>      memory_region_destroy(&s->bar);
>> diff --git a/kvm-all.c b/kvm-all.c
>> index 5d500e1..737c2e2 100644
>> --- a/kvm-all.c
>> +++ b/kvm-all.c
>> @@ -1396,6 +1396,29 @@ int kvm_set_ioeventfd_mmio_long(int fd, uint32_t addr, uint32_t val, bool assign
>>      return 0;
>>   }
>>
>> +int kvm_set_ioeventfd_pio_long(int fd, uint32_t addr, uint32_t val, bool assign)
>> +{
>> +    struct kvm_ioeventfd kick = {
>> +        .datamatch = val,
>> +        .addr = addr,
>> +        .len = 4,
>> +        .flags = KVM_IOEVENTFD_FLAG_DATAMATCH | KVM_IOEVENTFD_FLAG_PIO,
>> +        .fd = fd,
>> +    };
>> +    int r;
>> +    if (!kvm_enabled()) {
>> +        return -ENOSYS;
>> +    }
>> +    if (!assign) {
>> +        kick.flags |= KVM_IOEVENTFD_FLAG_DEASSIGN;
>> +    }
>> +    r = kvm_vm_ioctl(kvm_state, KVM_IOEVENTFD,&kick);
>> +    if (r<  0) {
>> +        return r;
>> +    }
>> +    return 0;
>> +}
>> +
>>   int kvm_set_ioeventfd_pio_word(int fd, uint16_t addr, uint16_t val, bool assign)
>>   {
>>      struct kvm_ioeventfd kick = {
>> diff --git a/kvm.h b/kvm.h
>> index b15e1dd..c2373c9 100644
>> --- a/kvm.h
>> +++ b/kvm.h
>> @@ -198,6 +198,7 @@ int kvm_set_ioeventfd_mmio_long(int fd, uint32_t adr, uint32_t val, bool assign)
>>
>>   int kvm_set_irqfd(int gsi, int fd, bool assigned);
>>
>> +int kvm_set_ioeventfd_pio_long(int fd, uint32_t adr, uint32_t val, bool assign);
>>   int kvm_set_ioeventfd_pio_word(int fd, uint16_t adr, uint16_t val, bool assign);
>>
>>   typedef struct KVMMsiMessage {
>> --
>> 1.7.1
>>
> .
>

      reply	other threads:[~2011-11-29  7:03 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-11-18  5:50 [Qemu-devel] [PATCH v2] ivshmem: add a new PIO BAR3(Doorbell) besides MMIO BAR0 to reduce notification time zanghongyong
2011-11-20  9:27 ` Avi Kivity
2011-11-29  6:38 ` Cam Macdonell
2011-11-29  7:02   ` Zang Hongyong [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4ED4839F.1070907@huawei.com \
    --to=zanghongyong@huawei.com \
    --cc=avi@redhat.com \
    --cc=cam@cs.ualberta.ca \
    --cc=hanweidong@huawei.com \
    --cc=james.chenjiabo@huawei.com \
    --cc=kvm@vger.kernel.org \
    --cc=louzhengwei@huawei.com \
    --cc=qemu-devel@nongnu.org \
    --cc=wuchangyi@huawei.com \
    --cc=wusongwei@huawei.com \
    --cc=xiaowei.yang@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).