From: "Andreas Färber" <afaerber@suse.de>
To: Peter Maydell <peter.maydell@linaro.org>
Cc: "Benoît Canet" <benoit.canet@gmail.com>,
qemu-devel@nongnu.org, patches@linaro.org,
"Avi Kivity" <avi@redhat.com>
Subject: Re: [Qemu-devel] [PATCH v4 2/2] hw/integratorcp: Simplify flash remap code
Date: Sat, 07 Jan 2012 05:40:50 +0100 [thread overview]
Message-ID: <4F07CCD2.4040003@suse.de> (raw)
In-Reply-To: <1325876308-28097-3-git-send-email-peter.maydell@linaro.org>
Am 06.01.2012 19:58, schrieb Peter Maydell:
> Use the new memory mutator API to simplify the flash remap code;
> this allows us to drop the flash_mapped flag.
>
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
I noticed you're dropping a comment about tlb_flush(). Is that because
it was dead code, or does the Memory API take care of it for us?
(I assume the former because memory_region_set_enabled() does not take a
CPUState* to operate on.)
Andreas
> ---
> hw/integratorcp.c | 26 +++++++-------------------
> 1 files changed, 7 insertions(+), 19 deletions(-)
>
> diff --git a/hw/integratorcp.c b/hw/integratorcp.c
> index d9d8da3..e5712fc 100644
> --- a/hw/integratorcp.c
> +++ b/hw/integratorcp.c
> @@ -21,7 +21,6 @@ typedef struct {
> MemoryRegion iomem;
> uint32_t memsz;
> MemoryRegion flash;
> - bool flash_mapped;
> uint32_t cm_osc;
> uint32_t cm_ctrl;
> uint32_t cm_lock;
> @@ -110,20 +109,12 @@ static uint64_t integratorcm_read(void *opaque, target_phys_addr_t offset,
> }
> }
>
> -static void integratorcm_do_remap(integratorcm_state *s, int flash)
> +static void integratorcm_do_remap(integratorcm_state *s)
> {
> - if (!flash) {
> - if (s->flash_mapped) {
> - sysbus_del_memory(&s->busdev, &s->flash);
> - s->flash_mapped = false;
> - }
> - } else {
> - if (!s->flash_mapped) {
> - sysbus_add_memory_overlap(&s->busdev, 0, &s->flash, 1);
> - s->flash_mapped = true;
> - }
> - }
> - //??? tlb_flush (cpu_single_env, 1);
> + /* Sync memory region state with CM_CTRL REMAP bit:
> + * bit 0 => flash at address 0; bit 1 => RAM
> + */
> + memory_region_set_enabled(&s->flash, !(s->cm_ctrl & 4));
> }
>
> static void integratorcm_set_ctrl(integratorcm_state *s, uint32_t value)
> @@ -131,9 +122,6 @@ static void integratorcm_set_ctrl(integratorcm_state *s, uint32_t value)
> if (value & 8) {
> qemu_system_reset_request();
> }
> - if ((s->cm_ctrl ^ value) & 4) {
> - integratorcm_do_remap(s, (value & 4) == 0);
> - }
> if ((s->cm_ctrl ^ value) & 1) {
> /* (value & 1) != 0 means the green "MISC LED" is lit.
> * We don't have any nice place to display LEDs. printf is a bad
> @@ -143,6 +131,7 @@ static void integratorcm_set_ctrl(integratorcm_state *s, uint32_t value)
> }
> /* Note that the RESET bit [3] always reads as zero */
> s->cm_ctrl = (s->cm_ctrl & ~5) | (value & 5);
> + integratorcm_do_remap(s);
> }
>
> static void integratorcm_update(integratorcm_state *s)
> @@ -263,13 +252,12 @@ static int integratorcm_init(SysBusDevice *dev)
> s->cm_init = 0x00000112;
> memory_region_init_ram(&s->flash, "integrator.flash", 0x100000);
> vmstate_register_ram_global(&s->flash);
> - s->flash_mapped = false;
>
> memory_region_init_io(&s->iomem, &integratorcm_ops, s,
> "integratorcm", 0x00800000);
> sysbus_init_mmio(dev, &s->iomem);
>
> - integratorcm_do_remap(s, 1);
> + integratorcm_do_remap(s);
> /* ??? Save/restore. */
> return 0;
> }
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
next prev parent reply other threads:[~2012-01-07 4:42 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-06 18:58 [Qemu-devel] [PATCH v4 0/2] integratorcp: fix and simplify flash remap code Peter Maydell
2012-01-06 18:58 ` [Qemu-devel] [PATCH v4 1/2] hw/integratorcp: Fix sense of REMAP bit Peter Maydell
2012-01-10 17:35 ` andrzej zaborowski
2012-01-06 18:58 ` [Qemu-devel] [PATCH v4 2/2] hw/integratorcp: Simplify flash remap code Peter Maydell
2012-01-07 4:40 ` Andreas Färber [this message]
2012-01-07 16:09 ` Peter Maydell
2012-01-08 11:16 ` Avi Kivity
2012-01-08 11:19 ` Andreas Färber
2012-01-08 11:22 ` Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F07CCD2.4040003@suse.de \
--to=afaerber@suse.de \
--cc=avi@redhat.com \
--cc=benoit.canet@gmail.com \
--cc=patches@linaro.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).