[Qemu-devel] Error booting from USB Storage Device in QEMU-KVM GIT MASTER

[Qemu-devel] Error booting from USB Storage Device in QEMU-KVM GIT MASTER

[Dyweni - Qemu-Devel]

 Hi,

 I am unable to boot KVM using a usb flash drive. I'm using QEMU-KVM 
 built
 from GIT MASTER as of this morning.


 Here's my QEMU-KVM startup options:

  qemu-system-x86_64 \
 	-curses \
  	-m 512 \
  	-snapshot \
 	-device piix3-usb-uhci \
 	-drive id=usbflash,file=flash.img,if=none,boot=on,cache=writeback \
 	-device usb-storage,drive=usbflash \
  	-net nic,macaddr=$(getmacpublic),vlan=0 -net 
 tap,vlan=0,ifname=$publictap,script=no \
  	-net nic,macaddr=$(getmacprivate),vlan=1 -net 
 tap,vlan=1,ifname=$privatetap,script=no \
  	$*





 Here's the debugging output from SeaBIOS.  (Notice the 'Unable to 
 configure USB MSC device.' message):



 + qemu-system-x86_64 -m 512 -snapshot -device piix3-usb-uhci -drive 
 id=usbflash,file=flash.img,if=none,boot=on,cache=writeback -device 
 usb-storage,drive=usbflash -net nic,macaddr=00:AA:00:AA:62:AA,vlan=0 
 -net tap,vlan=0,ifname=tap0,script=no -net 
 nic,macaddr=00:AA:00:D2:D1:BB,vlan=1 -net 
 tap,vlan=1,ifname=tap1,script=no -chardev stdio,id=seabios -device 
 isa-debugcon,iobase=0x402,chardev=seabios
 qemu-kvm: boot=on|off is deprecated and will be ignored. Future 
 versions will reject this parameter. Please update your scripts.
 Start bios (version 1.6.3)
 Ram Size=0x20000000 (0x0000000000000000 high)
 Relocating init from 0x000e3b20 to 0x1ffe12e0 (size 60412)
 CPU Mhz=3601
 === PCI bus & bridge init ===
 PCI: pci_bios_init_bus_rec bus = 0x0
 === PCI device probing ===
 Found 8 PCI devices (max PCI bus is 00)
 === PCI new allocation pass #1 ===
 PCI: check devices bus 0
 === PCI new allocation pass #2 ===
 PCI: init bases bus 0 (primary)
   type io max 100 sum 230 base c000
     size      100: 2 bar(s),     c000 ->     c1ff
     size       20: 1 bar(s),     c200 ->     c21f
     size       10: 1 bar(s),     c220 ->     c22f
   type mem max 10000 sum 33000 base febc0000
     size    10000: 3 bar(s), febc0000 -> febeffff
     size     1000: 3 bar(s), febf0000 -> febf2fff
   type prefmem max 2000000 sum 2000000 base fc000000
     size  2000000: 1 bar(s), fc000000 -> fdffffff
 PCI: map device bus 0, bfd 0x0
 PCI: map device bus 0, bfd 0x8
 PCI: map device bus 0, bfd 0x9
   bar 4, addr c220, size 10 [io]
 PCI: map device bus 0, bfd 0xb
 PCI: map device bus 0, bfd 0x10
   bar 0, addr fc000000, size 2000000 [mem]
   bar 1, addr febf0000, size 1000 [mem]
   bar 6, addr febc0000, size 10000 [mem]
 PCI: map device bus 0, bfd 0x18
   bar 0, addr c000, size 100 [io]
   bar 1, addr febf1000, size 100 [mem]
   bar 6, addr febd0000, size 10000 [mem]
 PCI: map device bus 0, bfd 0x20
   bar 0, addr c100, size 100 [io]
   bar 1, addr febf2000, size 100 [mem]
   bar 6, addr febe0000, size 10000 [mem]
 PCI: map device bus 0, bfd 0x28
   bar 4, addr c200, size 20 [io]
 PCI: bus=0 devfn=0x00: vendor_id=0x8086 device_id=0x1237
 PCI: bus=0 devfn=0x08: vendor_id=0x8086 device_id=0x7000
 PCI: bus=0 devfn=0x09: vendor_id=0x8086 device_id=0x7010
 PCI: bus=0 devfn=0x0b: vendor_id=0x8086 device_id=0x7113
 PCI: bus=0 devfn=0x10: vendor_id=0x1013 device_id=0x00b8
 PCI: bus=0 devfn=0x18: vendor_id=0x10ec device_id=0x8139
 PCI: bus=0 devfn=0x20: vendor_id=0x10ec device_id=0x8139
 PCI: bus=0 devfn=0x28: vendor_id=0x8086 device_id=0x7020
 PIIX3/PIIX4 init: elcr=00 0c

 Found 1 cpu(s) max supported 1 cpu(s)
 MP table addr=0x000fd620 MPC table addr=0x000fd630 size=240
 SMBIOS ptr=0x000fd600 table=0x000fd4f0 size=263
 ACPI tables: RSDP=0x000fd4c0 RSDT=0x1fffd7b0
 Scan for VGA option rom
 Running option rom at c000:0003
 Turning on vga text mode console
 SeaBIOS (version 1.6.3)

 UHCI init on dev 00:05.0 (io=c200)
 Found 1 lpt ports
 Found 1 serial ports
 ATA controller 1 at 1f0/3f4/0 (irq 14 dev 9)
 ATA controller 2 at 170/374/0 (irq 15 dev 9)
 DVD/CD [ata1-0: QEMU DVD-ROM ATAPI-4 DVD/CD]
 Searching bootorder for: /pci@i0cf8/*@1,1/drive@1/disk@0
 ebda moved from 9fc00 to 9f800
 USB MSC vendor='QEMU' product='QEMU HARDDISK' rev='1.0.' type=0 
 removable=0
 Unable to configure USB MSC device.
 PS2 keyboard initialized
 All threads complete.
 Scan for option roms
 Running option rom at c900:0003
 pmm call arg1=1
 pmm call arg1=0
 pmm call arg1=1
 pmm call arg1=0
 Running option rom at ca00:0003
 pmm call arg1=1
 pmm call arg1=1
 Searching bootorder for: /pci@i0cf8/*@3
 Searching bootorder for: /pci@i0cf8/*@4
 Searching bootorder for: /rom@genroms/vapic.bin
 Running option rom at cb00:0003
 ebda moved from 9f800 to 9f000
 Returned 53248 bytes of ZoneHigh
 e820 map has 7 items:
   0: 0000000000000000 - 000000000009f000 = 1 RAM
   1: 000000000009f000 - 00000000000a0000 = 2 RESERVED
   2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
   3: 0000000000100000 - 000000001fffd000 = 1 RAM
   4: 000000001fffd000 - 0000000020000000 = 2 RESERVED
   5: 00000000feffc000 - 00000000ff000000 = 2 RESERVED
   6: 00000000fffc0000 - 0000000100000000 = 2 RESERVED
 enter handle_19:
   NULL
 Booting from DVD/CD...
 Device reports MEDIUM NOT PRESENT
 atapi_is_ready returned -1
 Boot failed: Could not read from CDROM (code 0003)
 enter handle_18:

   NULL
 Booting from ROM...
 Booting from c900:0372
 enter handle_18:
   NULL
 Booting from ROM...
 Booting from ca00:0372
 In resume (status=0)
 In 32bit resume
 Attempting a hard reboot







-- 
 Thanks,
 Dyweni

Re: [Qemu-devel] Error booting from USB Storage Device in QEMU-KVM GIT MASTER

[Dyweni - Qemu-Devel]

 Hi All,


 After booting KVM using the flash image as both a regular disk and a 
 usb storage device.. /dev/sda is detected from ata1.00 and /dev/sdb is 
 detected from usb-storage-1-1:1.0.  Both /dev/sdX devices are the same 
 disk / partition layout.




 ---
 Thanks,
 Dyweni



 On Thu, 19 Jan 2012 06:57:59 -0600, Dyweni - Qemu-Devel wrote:

> Hi,
>
> I am unable to boot KVM using a usb flash drive. I'm using QEMU-KVM
> built
> from GIT MASTER as of this morning.
>
> Here's my QEMU-KVM startup options:
>
> qemu-system-x86_64
> -curses
> -m 512
> -snapshot
> -device piix3-usb-uhci
> -drive id=usbflash,file=flash.img,if=none,boot=on,cache=writeback
> -device usb-storage,drive=usbflash
> -net nic,macaddr=$(getmacpublic),vlan=0 -net
> tap,vlan=0,ifname=$publictap,script=no
> -net nic,macaddr=$(getmacprivate),vlan=1 -net
> tap,vlan=1,ifname=$privatetap,script=no
> $*
>
> Here's the debugging output from SeaBIOS. (Notice the 'Unable to
> configure USB MSC device.' message):
>
> + qemu-system-x86_64 -m 512 -snapshot -device piix3-usb-uhci -drive
> id=usbflash,file=flash.img,if=none,boot=on,cache=writeback -device
> usb-storage,drive=usbflash -net nic,macaddr=00:AA:00:AA:62:AA,vlan=0
> -net tap,vlan=0,ifname=tap0,script=no -net
> nic,macaddr=00:AA:00:D2:D1:BB,vlan=1 -net
> tap,vlan=1,ifname=tap1,script=no -chardev stdio,id=seabios -device
> isa-debugcon,iobase=0x402,chardev=seabios
> qemu-kvm: boot=on|off is deprecated and will be ignored. Future
> versions will reject this parameter. Please update your scripts.
> Start bios (version 1.6.3)
> Ram Size=0x20000000 (0x0000000000000000 high)
> Relocating init from 0x000e3b20 to 0x1ffe12e0 (size 60412)
> CPU Mhz=3601
> === PCI bus & bridge init ===
> PCI: pci_bios_init_bus_rec bus = 0x0
> === PCI device probing ===
> Found 8 PCI devices (max PCI bus is 00)
> === PCI new allocation pass #1 ===
> PCI: check devices bus 0
> === PCI new allocation pass #2 ===
> PCI: init bases bus 0 (primary)
> type io max 100 sum 230 base c000
> size 100: 2 bar(s), c000 -> c1ff
> size 20: 1 bar(s), c200 -> c21f
> size 10: 1 bar(s), c220 -> c22f
> type mem max 10000 sum 33000 base febc0000
> size 10000: 3 bar(s), febc0000 -> febeffff
> size 1000: 3 bar(s), febf0000 -> febf2fff
> type prefmem max 2000000 sum 2000000 base fc000000
> size 2000000: 1 bar(s), fc000000 -> fdffffff
> PCI: map device bus 0, bfd 0x0
> PCI: map device bus 0, bfd 0x8
> PCI: map device bus 0, bfd 0x9
> bar 4, addr c220, size 10 [io]
> PCI: map device bus 0, bfd 0xb
> PCI: map device bus 0, bfd 0x10
> bar 0, addr fc000000, size 2000000 [mem]
> bar 1, addr febf0000, size 1000 [mem]
> bar 6, addr febc0000, size 10000 [mem]
> PCI: map device bus 0, bfd 0x18
> bar 0, addr c000, size 100 [io]
> bar 1, addr febf1000, size 100 [mem]
> bar 6, addr febd0000, size 10000 [mem]
> PCI: map device bus 0, bfd 0x20
> bar 0, addr c100, size 100 [io]
> bar 1, addr febf2000, size 100 [mem]
> bar 6, addr febe0000, size 10000 [mem]
> PCI: map device bus 0, bfd 0x28
> bar 4, addr c200, size 20 [io]
> PCI: bus=0 devfn=0x00: vendor_id=0x8086 device_id=0x1237
> PCI: bus=0 devfn=0x08: vendor_id=0x8086 device_id=0x7000
> PCI: bus=0 devfn=0x09: vendor_id=0x8086 device_id=0x7010
> PCI: bus=0 devfn=0x0b: vendor_id=0x8086 device_id=0x7113
> PCI: bus=0 devfn=0x10: vendor_id=0x1013 device_id=0x00b8
> PCI: bus=0 devfn=0x18: vendor_id=0x10ec device_id=0x8139
> PCI: bus=0 devfn=0x20: vendor_id=0x10ec device_id=0x8139
> PCI: bus=0 devfn=0x28: vendor_id=0x8086 device_id=0x7020
> PIIX3/PIIX4 init: elcr=00 0c
>
> Found 1 cpu(s) max supported 1 cpu(s)
> MP table addr=0x000fd620 MPC table addr=0x000fd630 size=240
> SMBIOS ptr=0x000fd600 table=0x000fd4f0 size=263
> ACPI tables: RSDP=0x000fd4c0 RSDT=0x1fffd7b0
> Scan for VGA option rom
> Running option rom at c000:0003
> Turning on vga text mode console
> SeaBIOS (version 1.6.3)
>
> UHCI init on dev 00:05.0 (io=c200)
> Found 1 lpt ports
> Found 1 serial ports
> ATA controller 1 at 1f0/3f4/0 (irq 14 dev 9)
> ATA controller 2 at 170/374/0 (irq 15 dev 9)
> DVD/CD [ata1-0: QEMU DVD-ROM ATAPI-4 DVD/CD]
> Searching bootorder for: /pci@i0cf8/*@1,1/drive@1/disk@0
> ebda moved from 9fc00 to 9f800
> USB MSC vendor='QEMU' product='QEMU HARDDISK' rev='1.0.' type=0
> removable=0
> Unable to configure USB MSC device.
> PS2 keyboard initialized
> All threads complete.
> Scan for option roms
> Running option rom at c900:0003
> pmm call arg1=1
> pmm call arg1=0
> pmm call arg1=1
> pmm call arg1=0
> Running option rom at ca00:0003
> pmm call arg1=1
> pmm call arg1=1
> Searching bootorder for: /pci@i0cf8/*@3
> Searching bootorder for: /pci@i0cf8/*@4
> Searching bootorder for: /rom@genroms/vapic.bin
> Running option rom at cb00:0003
> ebda moved from 9f800 to 9f000
> Returned 53248 bytes of ZoneHigh
> e820 map has 7 items:
> 0: 0000000000000000 - 000000000009f000 = 1 RAM
> 1: 000000000009f000 - 00000000000a0000 = 2 RESERVED
> 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
> 3: 0000000000100000 - 000000001fffd000 = 1 RAM
> 4: 000000001fffd000 - 0000000020000000 = 2 RESERVED
> 5: 00000000feffc000 - 00000000ff000000 = 2 RESERVED
> 6: 00000000fffc0000 - 0000000100000000 = 2 RESERVED
> enter handle_19:
> NULL
> Booting from DVD/CD...
> Device reports MEDIUM NOT PRESENT
> atapi_is_ready returned -1
> Boot failed: Could not read from CDROM (code 0003)
> enter handle_18:
>
> NULL
> Booting from ROM...
> Booting from c900:0372
> enter handle_18:
> NULL
> Booting from ROM...
> Booting from ca00:0372
> In resume (status=0)
> In 32bit resume
> Attempting a hard reboot
>
> --
> Thanks,
> Dyweni

Re: [Qemu-devel] Error booting from USB Storage Device in QEMU-KVM GIT MASTER

[Gerd Hoffmann]

On 01/19/12 13:57, Dyweni - Qemu-Devel wrote:
> Hi,
> 
> I am unable to boot KVM using a usb flash drive. I'm using QEMU-KVM built
> from GIT MASTER as of this morning.

> Start bios (version 1.6.3)

> USB MSC vendor='QEMU' product='QEMU HARDDISK' rev='1.0.' type=0 removable=0
> Unable to configure USB MSC device.

seabios 1.6.3.1 fails for me whereas master works fine.

time for a new seabios release?

cheers,
  Gerd

Re: [Qemu-devel] [SeaBIOS] Error booting from USB Storage Device in QEMU-KVM GIT MASTER

[Kevin O'Connor]

On Thu, Jan 19, 2012 at 06:57:59AM -0600, Dyweni - Qemu-Devel wrote:
> Hi,
> 
> I am unable to boot KVM using a usb flash drive. I'm using QEMU-KVM
> built
> from GIT MASTER as of this morning.
> 
> 
> Here's my QEMU-KVM startup options:
> 
>  qemu-system-x86_64 \
> 	-curses \
>  	-m 512 \
>  	-snapshot \
> 	-device piix3-usb-uhci \
> 	-drive id=usbflash,file=flash.img,if=none,boot=on,cache=writeback \
> 	-device usb-storage,drive=usbflash \
>  	-net nic,macaddr=$(getmacpublic),vlan=0 -net
> tap,vlan=0,ifname=$publictap,script=no \
>  	-net nic,macaddr=$(getmacprivate),vlan=1 -net
> tap,vlan=1,ifname=$privatetap,script=no \
>  	$*

I tried a modifed version of the above, and it worked fine for me.

qemu-system-x86_64 -snapshot -L test -device piix3-usb-uhci -drive id=usbflash,file=dos-drivec-new,if=none,cache=writeback -device usb-storage,drive=usbflash -chardev stdio,id=seabios -device isa-debugcon,iobase=0x402,chardev=seabios

What version of qemu are you using?  There are a few known quirks in
the seabios code that were fixed recently, but I did not think they
impacted the qemu emulation.

-Kevin

Re: [Qemu-devel] [SeaBIOS] Error booting from USB Storage Device in QEMU-KVM GIT MASTER

[Dyweni - Qemu-Devel]

 Hi All,

 I have good and bad news...

 I tested QEMU-KVM using branches 'master'
 (9501d0f1b6efc83f69d06b27a625bad71d30d58b) and 'uq/master'
 (6a48ffaaa732b2142c1b5030178f2d4a0fa499fe). Seabios used was the 
 version
 included in those branches (no -L switch). Both branches failed to 
 detect
 the USB Flash Drive (error message: 'Unable to configure USB MSC 
 device.').

 I checked out SeaBios branch 'master'
 (b3df857fe6d3fffb108379637ea4a456ce6e09ba) and passed that to QEMU-KVM
 using the -L switch. Both branches don't fail as bad. Both versions 
 detect
 the USB Flash Drive (message: 'USB MSC blksize=512 sectors=204800') and
 then indicate they are booting from hard disk.

 In order to see the console, I had to copy the following files into the
 directory specified by the -L switch in order to see the screen:
 - vgabios-cirrus.bin
 - pxe-rtl8139.rom
 - vapic.bin

 I also noticed one new regression: booting runs REALLY REALLY slow. The
 upgrade from 0.14 w/ USB to git master w/ IDE slowed down a little bit.
 But this is magnitudes slower.  While I'm waiting, I see one of my 
 cores
 at 100% usage.

 ---
 Thanks,
 Dyweni

 On Thu, 19 Jan 2012 20:57:11 -0500, Kevin O'Connor wrote:

> On Thu, Jan 19, 2012 at 06:57:59AM -0600, Dyweni - Qemu-Devel wrote:
>> Hi, I am unable to boot KVM using a usb flash drive. I'm using 
>> QEMU-KVM
>> built from GIT MASTER as of this morning. Here's my QEMU-KVM startup
>> options: qemu-system-x86_64 -curses -m 512 -snapshot -device
>> piix3-usb-uhci -drive
>> id=usbflash,file=flash.img,if=none,boot=on,cache=writeback -device
>> usb-storage,drive=usbflash -net nic,macaddr=$(getmacpublic),vlan=0 
>> -net
>> tap,vlan=0,ifname=$publictap,script=no -net
>> nic,macaddr=$(getmacprivate),vlan=1 -net
>> tap,vlan=1,ifname=$privatetap,script=no $*
> I tried a modifed version of the above, and it worked fine for me.
> qemu-system-x86_64 -snapshot -L test -device piix3-usb-uhci -drive
> id=usbflash,file=dos-drivec-new,if=none,cache=writeback -device
> usb-storage,drive=usbflash -chardev stdio,id=seabios -device
> isa-debugcon,iobase=0x402,chardev=seabios What version of qemu are 
> you
> using? There are a few known quirks in the seabios code that were 
> fixed
> recently, but I did not think they impacted the qemu emulation. 
> -Kevin