* [Qemu-devel] [PATCH v3] w32: Support tests (make check)
@ 2012-03-14 6:44 Stefan Weil
2012-03-14 9:10 ` Kevin Wolf
2012-03-14 13:35 ` Andreas Färber
0 siblings, 2 replies; 5+ messages in thread
From: Stefan Weil @ 2012-03-14 6:44 UTC (permalink / raw)
To: qemu-devel; +Cc: Kevin Wolf, Stefan Weil, Anthony Liguori, Andreas Färber
Adding $(EXESUF) is needed to make those tests work on w32 hosts, too.
v2:
Rebased, added new tests, tests sorted alphabetically.
v3:
Rebased, $(EXESUF) for qemu-img, qemu-io which were recently added.
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Andreas Färber <afaerber@suse.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
---
This is the 3rd version of my patch. The 1st was sent in February,
and since then some other newer (!) patches were committed,
so I had to rebase my patch two times.
Just to avoid misunderstandings: it's a patch for the test maintainer
(Anthony?), not for the w32 maintainer (me), so I don't send a
pull request. As far as I understood Anthony, it was in his queue,
but obviously it got lost there. Maybe it's possible to commit it now.
Andreas, I added your reviewed-by from v2. v3 includes additional
changes, so could you please check that the reviewed-by is still valid?
Cheers,
Stefan W.
tests/Makefile | 40 ++++++++++++++++++++++++----------------
1 files changed, 24 insertions(+), 16 deletions(-)
diff --git a/tests/Makefile b/tests/Makefile
index c78ade1..43f4f24 100644
--- a/tests/Makefile
+++ b/tests/Makefile
@@ -1,19 +1,27 @@
export SRC_PATH
-CHECKS = check-qdict check-qfloat check-qint check-qstring check-qlist
-CHECKS += check-qjson test-qmp-output-visitor test-qmp-input-visitor
-CHECKS += test-string-input-visitor test-string-output-visitor test-coroutine
+CHECKS = check-qdict$(EXESUF)
+CHECKS += check-qfloat$(EXESUF)
+CHECKS += check-qint$(EXESUF)
+CHECKS += check-qjson$(EXESUF)
+CHECKS += check-qlist$(EXESUF)
+CHECKS += check-qstring$(EXESUF)
+CHECKS += test-coroutine$(EXESUF)
+CHECKS += test-qmp-input-visitor$(EXESUF)
+CHECKS += test-qmp-output-visitor$(EXESUF)
+CHECKS += test-string-input-visitor$(EXESUF)
+CHECKS += test-string-output-visitor$(EXESUF)
CHECKS += $(SRC_PATH)/tests/qemu-iotests-quick.sh
check-qint.o check-qstring.o check-qdict.o check-qlist.o check-qfloat.o check-qjson.o test-coroutine.o: $(GENERATED_HEADERS)
-check-qint: check-qint.o qint.o $(tools-obj-y)
-check-qstring: check-qstring.o qstring.o $(tools-obj-y)
-check-qdict: check-qdict.o qdict.o qfloat.o qint.o qstring.o qbool.o qlist.o $(tools-obj-y)
-check-qlist: check-qlist.o qlist.o qint.o $(tools-obj-y)
-check-qfloat: check-qfloat.o qfloat.o $(tools-obj-y)
-check-qjson: check-qjson.o $(qobject-obj-y) $(tools-obj-y)
-test-coroutine: test-coroutine.o qemu-timer-common.o async.o $(coroutine-obj-y) $(tools-obj-y)
+check-qint$(EXESUF): check-qint.o qint.o $(tools-obj-y)
+check-qstring$(EXESUF): check-qstring.o qstring.o $(tools-obj-y)
+check-qdict$(EXESUF): check-qdict.o qdict.o qfloat.o qint.o qstring.o qbool.o qlist.o $(tools-obj-y)
+check-qlist$(EXESUF): check-qlist.o qlist.o qint.o $(tools-obj-y)
+check-qfloat$(EXESUF): check-qfloat.o qfloat.o $(tools-obj-y)
+check-qjson$(EXESUF): check-qjson.o $(qobject-obj-y) $(tools-obj-y)
+test-coroutine$(EXESUF): test-coroutine.o qemu-timer-common.o async.o $(coroutine-obj-y) $(tools-obj-y)
test-qmp-input-visitor.o test-qmp-output-visitor.o \
test-string-input-visitor.o test-string-output-visitor.o \
@@ -31,21 +39,21 @@ $(SRC_PATH)/qapi-schema-test.json $(SRC_PATH)/scripts/qapi-commands.py
test-string-output-visitor.o: $(addprefix $(qapi-dir)/, test-qapi-types.c test-qapi-types.h test-qapi-visit.c test-qapi-visit.h) $(qapi-obj-y)
-test-string-output-visitor: test-string-output-visitor.o $(qobject-obj-y) $(qapi-obj-y) $(tools-obj-y) $(qapi-dir)/test-qapi-visit.o $(qapi-dir)/test-qapi-types.o
+test-string-output-visitor$(EXESUF): test-string-output-visitor.o $(qobject-obj-y) $(qapi-obj-y) $(tools-obj-y) $(qapi-dir)/test-qapi-visit.o $(qapi-dir)/test-qapi-types.o
test-string-input-visitor.o: $(addprefix $(qapi-dir)/, test-qapi-types.c test-qapi-types.h test-qapi-visit.c test-qapi-visit.h) $(qapi-obj-y)
-test-string-input-visitor: test-string-input-visitor.o $(qobject-obj-y) $(qapi-obj-y) $(tools-obj-y) $(qapi-dir)/test-qapi-visit.o $(qapi-dir)/test-qapi-types.o
+test-string-input-visitor$(EXESUF): test-string-input-visitor.o $(qobject-obj-y) $(qapi-obj-y) $(tools-obj-y) $(qapi-dir)/test-qapi-visit.o $(qapi-dir)/test-qapi-types.o
test-qmp-output-visitor.o: $(addprefix $(qapi-dir)/, test-qapi-types.c test-qapi-types.h test-qapi-visit.c test-qapi-visit.h) $(qapi-obj-y)
-test-qmp-output-visitor: test-qmp-output-visitor.o $(qobject-obj-y) $(qapi-obj-y) $(tools-obj-y) $(qapi-dir)/test-qapi-visit.o $(qapi-dir)/test-qapi-types.o
+test-qmp-output-visitor$(EXESUF): test-qmp-output-visitor.o $(qobject-obj-y) $(qapi-obj-y) $(tools-obj-y) $(qapi-dir)/test-qapi-visit.o $(qapi-dir)/test-qapi-types.o
test-qmp-input-visitor.o: $(addprefix $(qapi-dir)/, test-qapi-types.c test-qapi-types.h test-qapi-visit.c test-qapi-visit.h) $(qapi-obj-y)
-test-qmp-input-visitor: test-qmp-input-visitor.o $(qobject-obj-y) $(qapi-obj-y) $(tools-obj-y) $(qapi-dir)/test-qapi-visit.o $(qapi-dir)/test-qapi-types.o
+test-qmp-input-visitor$(EXESUF): test-qmp-input-visitor.o $(qobject-obj-y) $(qapi-obj-y) $(tools-obj-y) $(qapi-dir)/test-qapi-visit.o $(qapi-dir)/test-qapi-types.o
test-qmp-commands.o: $(addprefix $(qapi-dir)/, test-qapi-types.c test-qapi-types.h test-qapi-visit.c test-qapi-visit.h test-qmp-marshal.c test-qmp-commands.h) $(qapi-obj-y)
-test-qmp-commands: test-qmp-commands.o $(qobject-obj-y) $(qapi-obj-y) $(tools-obj-y) $(qapi-dir)/test-qapi-visit.o $(qapi-dir)/test-qapi-types.o $(qapi-dir)/test-qmp-marshal.o module.o
+test-qmp-commands$(EXESUF): test-qmp-commands.o $(qobject-obj-y) $(qapi-obj-y) $(tools-obj-y) $(qapi-dir)/test-qapi-visit.o $(qapi-dir)/test-qapi-types.o $(qapi-dir)/test-qmp-marshal.o module.o
-$(SRC_PATH)/tests/qemu-iotests-quick.sh: qemu-img qemu-io
+$(SRC_PATH)/tests/qemu-iotests-quick.sh: qemu-img$(EXESUF) qemu-io$(EXESUF)
.PHONY: check check-block
--
1.7.9
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [Qemu-devel] [PATCH v3] w32: Support tests (make check)
2012-03-14 6:44 [Qemu-devel] [PATCH v3] w32: Support tests (make check) Stefan Weil
@ 2012-03-14 9:10 ` Kevin Wolf
2012-03-14 13:39 ` Paolo Bonzini
2012-03-14 13:35 ` Andreas Färber
1 sibling, 1 reply; 5+ messages in thread
From: Kevin Wolf @ 2012-03-14 9:10 UTC (permalink / raw)
To: Stefan Weil; +Cc: Anthony Liguori, qemu-devel, Andreas Färber
Am 14.03.2012 07:44, schrieb Stefan Weil:
> Adding $(EXESUF) is needed to make those tests work on w32 hosts, too.
>
> v2:
> Rebased, added new tests, tests sorted alphabetically.
>
> v3:
> Rebased, $(EXESUF) for qemu-img, qemu-io which were recently added.
I have no idea if there's any chance of qemu-iotests successfully on
win32, but in order to make it actually run I think you would have to
change the file names in tests/qemu-iotests-quick.sh as well.
Kevin
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Qemu-devel] [PATCH v3] w32: Support tests (make check)
2012-03-14 9:10 ` Kevin Wolf
@ 2012-03-14 13:39 ` Paolo Bonzini
2012-03-14 17:14 ` Stefan Weil
0 siblings, 1 reply; 5+ messages in thread
From: Paolo Bonzini @ 2012-03-14 13:39 UTC (permalink / raw)
To: Kevin Wolf; +Cc: Stefan Weil, Anthony Liguori, qemu-devel, Andreas Färber
Il 14/03/2012 10:10, Kevin Wolf ha scritto:
> I have no idea if there's any chance of qemu-iotests successfully on
> win32, but in order to make it actually run I think you would have to
> change the file names in tests/qemu-iotests-quick.sh as well.
I think the shell is able to add the suffix automatically, it's just
make that needs it explicitly.
Paolo
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Qemu-devel] [PATCH v3] w32: Support tests (make check)
2012-03-14 13:39 ` Paolo Bonzini
@ 2012-03-14 17:14 ` Stefan Weil
0 siblings, 0 replies; 5+ messages in thread
From: Stefan Weil @ 2012-03-14 17:14 UTC (permalink / raw)
To: Kevin Wolf
Cc: Paolo Bonzini, Anthony Liguori, qemu-devel, Andreas Färber
Am 14.03.2012 14:39, schrieb Paolo Bonzini:
> Il 14/03/2012 10:10, Kevin Wolf ha scritto:
>> I have no idea if there's any chance of qemu-iotests successfully on
>> win32, but in order to make it actually run I think you would have to
>> change the file names in tests/qemu-iotests-quick.sh as well.
>
> I think the shell is able to add the suffix automatically, it's just
> make that needs it explicitly.
>
> Paolo
Yes, tests/qemu-iotests-quick.sh does not need a patch
to run the iotests on w32 or w64.
There are some other issues to solve for MinGW based
hosts:
* hostname does not support -s (is this option really needed?)
* there is no bc command (maybe the shell would be enough)
* TEST_DIR must not be an absolute path
* qemu-io does not read from stdin
* wrong order of arguments to qemu-io -c write, read
* other small issues
All these points can be fixed, and I already did run some of the tests.
The patch here only fixes make. Without it, make fails
with linker errors.
Regards,
Stefan W.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Qemu-devel] [PATCH v3] w32: Support tests (make check)
2012-03-14 6:44 [Qemu-devel] [PATCH v3] w32: Support tests (make check) Stefan Weil
2012-03-14 9:10 ` Kevin Wolf
@ 2012-03-14 13:35 ` Andreas Färber
1 sibling, 0 replies; 5+ messages in thread
From: Andreas Färber @ 2012-03-14 13:35 UTC (permalink / raw)
To: Stefan Weil; +Cc: Kevin Wolf, Anthony Liguori, qemu-devel
Am 14.03.2012 07:44, schrieb Stefan Weil:
> Adding $(EXESUF) is needed to make those tests work on w32 hosts, too.
>
> v2:
> Rebased, added new tests, tests sorted alphabetically.
>
> v3:
> Rebased, $(EXESUF) for qemu-img, qemu-io which were recently added.
>
> Cc: Anthony Liguori <aliguori@us.ibm.com>
> Cc: Kevin Wolf <kwolf@redhat.com>
> Cc: Andreas Färber <afaerber@suse.de>
> Reviewed-by: Andreas Färber <afaerber@suse.de>
> Signed-off-by: Stefan Weil <sw@weilnetz.de>
> ---
>
> This is the 3rd version of my patch. The 1st was sent in February,
> and since then some other newer (!) patches were committed,
> so I had to rebase my patch two times.
[...]
> Andreas, I added your reviewed-by from v2. v3 includes additional
> changes, so could you please check that the reviewed-by is still valid?
Apart from what Kevin pointed out, adding $(EXESUF) and shortening the
lines still looks good to me, so in case you want this as an
intermediate step,
Reviewed-by: Andreas Färber <afaerber@suse.de>
Andreas
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2012-03-14 17:14 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-03-14 6:44 [Qemu-devel] [PATCH v3] w32: Support tests (make check) Stefan Weil
2012-03-14 9:10 ` Kevin Wolf
2012-03-14 13:39 ` Paolo Bonzini
2012-03-14 17:14 ` Stefan Weil
2012-03-14 13:35 ` Andreas Färber
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).