From: "Andreas Färber" <afaerber@suse.de>
To: Alexander Graf <agraf@suse.de>
Cc: qemu-ppc@nongnu.org, qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH v2 for-1.1 4/4] tcg/ppc: Fix CONFIG_TCG_PASS_AREG0 mode
Date: Wed, 09 May 2012 12:46:56 +0200 [thread overview]
Message-ID: <4FAA4B20.9060403@suse.de> (raw)
In-Reply-To: <4FAA46A5.8080505@suse.de>
Am 09.05.2012 12:27, schrieb Alexander Graf:
> On 05/09/2012 02:28 AM, Andreas Färber wrote:
>> Adjust the tcg_out_qemu_{ld,st}() slow paths to pass AREG0 in r3,
>> based on patches by malc.
>>
>> Also adjust the registers clobbered, based on patch by Alex.
>>
>> Signed-off-by: Andreas Färber<afaerber@suse.de>
>> ---
>> tcg/ppc/tcg-target.c | 37 ++++++++++++++++++++++++++++++++++++-
>> 1 files changed, 36 insertions(+), 1 deletions(-)
>>
>> diff --git a/tcg/ppc/tcg-target.c b/tcg/ppc/tcg-target.c
>> index 20888e2..ca84aba 100644
>> --- a/tcg/ppc/tcg-target.c
>> +++ b/tcg/ppc/tcg-target.c
>> @@ -244,9 +244,19 @@ static int
>> target_parse_constraint(TCGArgConstraint *ct, const char **pct_str)
>> tcg_regset_set32(ct->u.regs, 0, 0xffffffff);
>> tcg_regset_reset_reg(ct->u.regs, TCG_REG_R3);
>> tcg_regset_reset_reg(ct->u.regs, TCG_REG_R4);
>> +#ifdef CONFIG_TCG_PASS_AREG0
>> + tcg_regset_reset_reg(ct->u.regs, TCG_REG_R5);
>> +#if TARGET_LONG_BITS == 64
>> + tcg_regset_reset_reg(ct->u.regs, TCG_REG_R6);
>> +#ifdef TCG_TARGET_CALL_ALIGN_ARGS
>> + tcg_regset_reset_reg(ct->u.regs, TCG_REG_R7);
>> +#endif
>> +#endif
>> +#else /* !AREG0 */
>> #if TARGET_LONG_BITS == 64
>> tcg_regset_reset_reg(ct->u.regs, TCG_REG_R5);
>> #endif
>> +#endif
>> break;
>> case 'K': /* qemu_st[8..32] constraint */
>> ct->ct |= TCG_CT_REG;
>> @@ -254,9 +264,19 @@ static int
>> target_parse_constraint(TCGArgConstraint *ct, const char **pct_str)
>> tcg_regset_reset_reg(ct->u.regs, TCG_REG_R3);
>> tcg_regset_reset_reg(ct->u.regs, TCG_REG_R4);
>> tcg_regset_reset_reg(ct->u.regs, TCG_REG_R5);
>> +#ifdef CONFIG_TCG_PASS_AREG0
>> + tcg_regset_reset_reg(ct->u.regs, TCG_REG_R6);
>> +#if TARGET_LONG_BITS == 64
>> + tcg_regset_reset_reg(ct->u.regs, TCG_REG_R7);
>> +#ifdef TCG_TARGET_CALL_ALIGN_ARGS
>> + tcg_regset_reset_reg(ct->u.regs, TCG_REG_R8);
>> +#endif
>> +#endif
>> +#else /* !AREG0 */
>> #if TARGET_LONG_BITS == 64
>> tcg_regset_reset_reg(ct->u.regs, TCG_REG_R6);
>> #endif
>> +#endif
>> break;
>> case 'M': /* qemu_st64 constraint */
>> ct->ct |= TCG_CT_REG;
>> @@ -266,6 +286,12 @@ static int
>> target_parse_constraint(TCGArgConstraint *ct, const char **pct_str)
>> tcg_regset_reset_reg(ct->u.regs, TCG_REG_R5);
>> tcg_regset_reset_reg(ct->u.regs, TCG_REG_R6);
>> tcg_regset_reset_reg(ct->u.regs, TCG_REG_R7);
>> +#if defined(CONFIG_TCG_PASS_AREG0)
>> + tcg_regset_reset_reg(ct->u.regs, TCG_REG_R8);
>> +#ifdef TCG_TARGET_CALL_ALIGN_ARGS
>> + tcg_regset_reset_reg(ct->u.regs, TCG_REG_R9);
>> +#endif
>> +#endif
>> break;
>> #else
>> case 'L':
>> @@ -512,7 +538,6 @@ static void tcg_out_call (TCGContext *s,
>> tcg_target_long arg, int const_arg)
>> #include "../../softmmu_defs.h"
>>
>> #ifdef CONFIG_TCG_PASS_AREG0
>> -#error CONFIG_TCG_PASS_AREG0 is not supported
>> /* helper signature: helper_ld_mmu(CPUState *env, target_ulong addr,
>> int mmu_idx) */
>> static const void * const qemu_ld_helpers[4] = {
>> @@ -617,7 +642,12 @@ static void tcg_out_qemu_ld (TCGContext *s, const
>> TCGArg *args, int opc)
>> #endif
>>
>> /* slow path */
>> +#ifdef CONFIG_TCG_PASS_AREG0
>> + tcg_out_mov (s, TCG_TYPE_I32, 3, TCG_AREG0);
>> + ir = 4;
>> +#else
>> ir = 3;
>> +#endif
>
> I liked your "start ir with 3 and only ir++ from then on" way of doing
> this better.
>
> ir = 3;
> #ifdef ...
> tcg_out_mov(,,, ir++);
> #endif
This didn't change from v1, but I can update.
Andreas
>
>> #if TARGET_LONG_BITS == 32
>> tcg_out_mov (s, TCG_TYPE_I32, ir++, addr_reg);
>> #else
>> @@ -816,7 +846,12 @@ static void tcg_out_qemu_st (TCGContext *s, const
>> TCGArg *args, int opc)
>> #endif
>>
>> /* slow path */
>> +#ifdef CONFIG_TCG_PASS_AREG0
>> + tcg_out_mov (s, TCG_TYPE_I32, 3, TCG_AREG0);
>> + ir = 4;
>> +#else
>> ir = 3;
>> +#endif
>
> Same here
>
>
> Alex
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
next prev parent reply other threads:[~2012-05-09 10:47 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-09 0:28 [Qemu-devel] [PATCH v2 for-1.1 0/4] tcg/ppc: AREG0 support and Darwin fixes Andreas Färber
2012-05-09 0:28 ` [Qemu-devel] [PATCH v2 for-1.1 1/4] tcg/ppc: Do not overwrite lower address word on Darwin and AIX Andreas Färber
2012-05-09 0:28 ` [Qemu-devel] [PATCH v2 for-1.1 2/4] tcg/ppc: Don't hardcode register numbers Andreas Färber
2012-05-09 0:28 ` [Qemu-devel] [PATCH v2 for-1.1 3/4] tcg/ppc: Clobber r5 for 64-bit qemu_ld Andreas Färber
2012-05-09 0:28 ` [Qemu-devel] [PATCH v2 for-1.1 4/4] tcg/ppc: Fix CONFIG_TCG_PASS_AREG0 mode Andreas Färber
2012-05-09 0:43 ` malc
2012-05-09 1:03 ` Andreas Färber
2012-05-09 10:30 ` Alexander Graf
2012-05-09 10:27 ` Alexander Graf
2012-05-09 10:46 ` Andreas Färber [this message]
2012-05-09 0:33 ` [Qemu-devel] [PATCH v2 for-1.1 0/4] tcg/ppc: AREG0 support and Darwin fixes malc
2012-05-09 0:55 ` Andreas Färber
2012-05-09 10:31 ` Alexander Graf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FAA4B20.9060403@suse.de \
--to=afaerber@suse.de \
--cc=agraf@suse.de \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).