* [Qemu-devel] [PATCH v4 13/16] net: Make "info network" output more readable info
@ 2012-05-25 14:02 zwu.kernel
2012-05-25 14:17 ` Jan Kiszka
0 siblings, 1 reply; 9+ messages in thread
From: zwu.kernel @ 2012-05-25 14:02 UTC (permalink / raw)
To: qemu-devel; +Cc: pbonzini, wuzhy, stefanha, kvm, jan.kiszka
From: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
---
net.c | 18 ++++++++++++++----
net.h | 12 ++++++++++++
net/hub.c | 23 +++++++++++++++++++++--
net/hub.h | 1 +
4 files changed, 48 insertions(+), 6 deletions(-)
diff --git a/net.c b/net.c
index 61dc28d..ae0deec 100644
--- a/net.c
+++ b/net.c
@@ -887,6 +887,12 @@ static const struct {
},
},
#endif /* CONFIG_NET_BRIDGE */
+ [NET_CLIENT_TYPE_HUB] = {
+ .type = "hubport",
+ .desc = {
+ { /* end of list */ }
+ },
+ },
};
int net_client_init(Monitor *mon, QemuOpts *opts, int is_netdev)
@@ -1068,7 +1074,7 @@ int do_netdev_del(Monitor *mon, const QDict *qdict, QObject **ret_data)
return 0;
}
-static void print_net_client(Monitor *mon, NetClientState *vc)
+void print_net_client(Monitor *mon, NetClientState *vc)
{
monitor_printf(mon, "%s: type=%s,%s\n", vc->name,
net_client_types[vc->info->type].type, vc->info_str);
@@ -1079,12 +1085,17 @@ void do_info_network(Monitor *mon)
NetClientState *nc, *peer;
net_client_type type;
- monitor_printf(mon, "Devices not on any VLAN:\n");
+ net_hub_info(mon);
+
QTAILQ_FOREACH(nc, &net_clients, next) {
peer = nc->peer;
type = nc->info->type;
+
+ if (net_hub_port_peer_nc(nc)) {
+ continue;
+ }
+
if (!peer || type == NET_CLIENT_TYPE_NIC) {
- monitor_printf(mon, " ");
print_net_client(mon, nc);
} /* else it's a netdev connected to a NIC, printed with the NIC */
if (peer && type == NET_CLIENT_TYPE_NIC) {
@@ -1092,7 +1103,6 @@ void do_info_network(Monitor *mon)
print_net_client(mon, peer);
}
}
- net_hub_info(mon);
}
void qmp_set_link(const char *name, bool up, Error **errp)
diff --git a/net.h b/net.h
index 250669a..08306a4 100644
--- a/net.h
+++ b/net.h
@@ -112,6 +112,18 @@ void qemu_check_nic_model(NICInfo *nd, const char *model);
int qemu_find_nic_model(NICInfo *nd, const char * const *models,
const char *default_model);
+ssize_t qemu_deliver_packet(NetClientState *sender,
+ unsigned flags,
+ const uint8_t *data,
+ size_t size,
+ void *opaque);
+ssize_t qemu_deliver_packet_iov(NetClientState *sender,
+ unsigned flags,
+ const struct iovec *iov,
+ int iovcnt,
+ void *opaque);
+
+void print_net_client(Monitor *mon, NetClientState *vc);
void do_info_network(Monitor *mon);
/* NIC info */
diff --git a/net/hub.c b/net/hub.c
index 122de69..8c77d03 100644
--- a/net/hub.c
+++ b/net/hub.c
@@ -184,6 +184,25 @@ NetClientState *net_hub_find_client_by_name(unsigned int hub_id,
}
/**
+ * Determine if one nc peers with one hub port
+ */
+bool net_hub_port_peer_nc(NetClientState *nc)
+{
+ NetHub *hub;
+ NetHubPort *port;
+
+ QLIST_FOREACH(hub, &hubs, next) {
+ QLIST_FOREACH(port, &hub->ports, next) {
+ if (nc == port->nc.peer) {
+ return true;
+ }
+ }
+ }
+
+ return false;
+}
+
+/**
* Print hub configuration
*/
void net_hub_info(Monitor *mon)
@@ -194,8 +213,8 @@ void net_hub_info(Monitor *mon)
QLIST_FOREACH(hub, &hubs, next) {
monitor_printf(mon, "hub %u\n", hub->id);
QLIST_FOREACH(port, &hub->ports, next) {
- monitor_printf(mon, " port %u peer %s\n", port->id,
- port->nc.peer ? port->nc.peer->name : "<none>");
+ monitor_printf(mon, " \\ ");
+ print_net_client(mon, port->nc.peer);
}
}
}
diff --git a/net/hub.h b/net/hub.h
index ff5024a..550189b 100644
--- a/net/hub.h
+++ b/net/hub.h
@@ -23,5 +23,6 @@ NetClientState *net_hub_find_client_by_name(unsigned int hub_id,
void net_hub_info(Monitor *mon);
int net_hub_id_for_client(NetClientState *nc, unsigned int *id);
void net_hub_check_clients(void);
+bool net_hub_port_peer_nc(NetClientState *nc);
#endif /* NET_HUB_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [Qemu-devel] [PATCH v4 13/16] net: Make "info network" output more readable info
2012-05-25 14:02 [Qemu-devel] [PATCH v4 13/16] net: Make "info network" output more readable info zwu.kernel
@ 2012-05-25 14:17 ` Jan Kiszka
2012-05-25 14:25 ` Zhi Yong Wu
0 siblings, 1 reply; 9+ messages in thread
From: Jan Kiszka @ 2012-05-25 14:17 UTC (permalink / raw)
To: zwu.kernel@gmail.com
Cc: pbonzini@redhat.com, wuzhy@linux.vnet.ibm.com,
qemu-devel@nongnu.org, kvm@vger.kernel.org,
stefanha@linux.vnet.ibm.com
On 2012-05-25 11:02, zwu.kernel@gmail.com wrote:
> From: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
>
> Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Please don't put reviewed-by tags here before the reviewer had a chance
to look at the code.
> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
> ---
> net.c | 18 ++++++++++++++----
> net.h | 12 ++++++++++++
> net/hub.c | 23 +++++++++++++++++++++--
> net/hub.h | 1 +
> 4 files changed, 48 insertions(+), 6 deletions(-)
>
> diff --git a/net.c b/net.c
> index 61dc28d..ae0deec 100644
> --- a/net.c
> +++ b/net.c
> @@ -887,6 +887,12 @@ static const struct {
> },
> },
> #endif /* CONFIG_NET_BRIDGE */
> + [NET_CLIENT_TYPE_HUB] = {
> + .type = "hubport",
> + .desc = {
> + { /* end of list */ }
> + },
> + },
This should be obsolete now.
> };
>
> int net_client_init(Monitor *mon, QemuOpts *opts, int is_netdev)
> @@ -1068,7 +1074,7 @@ int do_netdev_del(Monitor *mon, const QDict *qdict, QObject **ret_data)
> return 0;
> }
>
> -static void print_net_client(Monitor *mon, NetClientState *vc)
> +void print_net_client(Monitor *mon, NetClientState *vc)
> {
> monitor_printf(mon, "%s: type=%s,%s\n", vc->name,
> net_client_types[vc->info->type].type, vc->info_str);
> @@ -1079,12 +1085,17 @@ void do_info_network(Monitor *mon)
> NetClientState *nc, *peer;
> net_client_type type;
>
> - monitor_printf(mon, "Devices not on any VLAN:\n");
> + net_hub_info(mon);
> +
> QTAILQ_FOREACH(nc, &net_clients, next) {
> peer = nc->peer;
> type = nc->info->type;
> +
> + if (net_hub_port_peer_nc(nc)) {
> + continue;
> + }
> +
> if (!peer || type == NET_CLIENT_TYPE_NIC) {
> - monitor_printf(mon, " ");
> print_net_client(mon, nc);
> } /* else it's a netdev connected to a NIC, printed with the NIC */
> if (peer && type == NET_CLIENT_TYPE_NIC) {
> @@ -1092,7 +1103,6 @@ void do_info_network(Monitor *mon)
> print_net_client(mon, peer);
> }
> }
> - net_hub_info(mon);
Why introduce a different hub output format at all? Do it in the final
right from the start.
> }
>
> void qmp_set_link(const char *name, bool up, Error **errp)
> diff --git a/net.h b/net.h
> index 250669a..08306a4 100644
> --- a/net.h
> +++ b/net.h
> @@ -112,6 +112,18 @@ void qemu_check_nic_model(NICInfo *nd, const char *model);
> int qemu_find_nic_model(NICInfo *nd, const char * const *models,
> const char *default_model);
>
> +ssize_t qemu_deliver_packet(NetClientState *sender,
> + unsigned flags,
> + const uint8_t *data,
> + size_t size,
> + void *opaque);
> +ssize_t qemu_deliver_packet_iov(NetClientState *sender,
> + unsigned flags,
> + const struct iovec *iov,
> + int iovcnt,
> + void *opaque);
> +
I bet those two prototypes are required by some other patch (or are even
redundant).
> +void print_net_client(Monitor *mon, NetClientState *vc);
> void do_info_network(Monitor *mon);
>
> /* NIC info */
> diff --git a/net/hub.c b/net/hub.c
> index 122de69..8c77d03 100644
> --- a/net/hub.c
> +++ b/net/hub.c
> @@ -184,6 +184,25 @@ NetClientState *net_hub_find_client_by_name(unsigned int hub_id,
> }
>
> /**
> + * Determine if one nc peers with one hub port
> + */
> +bool net_hub_port_peer_nc(NetClientState *nc)
> +{
> + NetHub *hub;
> + NetHubPort *port;
> +
> + QLIST_FOREACH(hub, &hubs, next) {
> + QLIST_FOREACH(port, &hub->ports, next) {
> + if (nc == port->nc.peer) {
> + return true;
> + }
> + }
> + }
> +
> + return false;
> +}
> +
> +/**
> * Print hub configuration
> */
> void net_hub_info(Monitor *mon)
> @@ -194,8 +213,8 @@ void net_hub_info(Monitor *mon)
> QLIST_FOREACH(hub, &hubs, next) {
> monitor_printf(mon, "hub %u\n", hub->id);
> QLIST_FOREACH(port, &hub->ports, next) {
> - monitor_printf(mon, " port %u peer %s\n", port->id,
> - port->nc.peer ? port->nc.peer->name : "<none>");
> + monitor_printf(mon, " \\ ");
Two space too much of indention (you remove them above for the existing
peer \ peer outputs).
> + print_net_client(mon, port->nc.peer);
> }
> }
> }
> diff --git a/net/hub.h b/net/hub.h
> index ff5024a..550189b 100644
> --- a/net/hub.h
> +++ b/net/hub.h
> @@ -23,5 +23,6 @@ NetClientState *net_hub_find_client_by_name(unsigned int hub_id,
> void net_hub_info(Monitor *mon);
> int net_hub_id_for_client(NetClientState *nc, unsigned int *id);
> void net_hub_check_clients(void);
> +bool net_hub_port_peer_nc(NetClientState *nc);
>
> #endif /* NET_HUB_H */
Jan
--
Siemens AG, Corporate Technology, CT T DE IT 1
Corporate Competence Center Embedded Linux
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [Qemu-devel] [PATCH v4 13/16] net: Make "info network" output more readable info
2012-05-25 14:17 ` Jan Kiszka
@ 2012-05-25 14:25 ` Zhi Yong Wu
2012-05-25 14:40 ` Jan Kiszka
0 siblings, 1 reply; 9+ messages in thread
From: Zhi Yong Wu @ 2012-05-25 14:25 UTC (permalink / raw)
To: Jan Kiszka
Cc: pbonzini@redhat.com, wuzhy@linux.vnet.ibm.com,
qemu-devel@nongnu.org, kvm@vger.kernel.org,
stefanha@linux.vnet.ibm.com
On Fri, May 25, 2012 at 10:17 PM, Jan Kiszka <jan.kiszka@siemens.com> wrote:
> On 2012-05-25 11:02, zwu.kernel@gmail.com wrote:
>> From: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
>>
>> Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
>
> Please don't put reviewed-by tags here before the reviewer had a chance
> to look at the code.
>
>> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
>> ---
>> net.c | 18 ++++++++++++++----
>> net.h | 12 ++++++++++++
>> net/hub.c | 23 +++++++++++++++++++++--
>> net/hub.h | 1 +
>> 4 files changed, 48 insertions(+), 6 deletions(-)
>>
>> diff --git a/net.c b/net.c
>> index 61dc28d..ae0deec 100644
>> --- a/net.c
>> +++ b/net.c
>> @@ -887,6 +887,12 @@ static const struct {
>> },
>> },
>> #endif /* CONFIG_NET_BRIDGE */
>> + [NET_CLIENT_TYPE_HUB] = {
>> + .type = "hubport",
>> + .desc = {
>> + { /* end of list */ }
>> + },
>> + },
>
> This should be obsolete now.
>
>> };
>>
>> int net_client_init(Monitor *mon, QemuOpts *opts, int is_netdev)
>> @@ -1068,7 +1074,7 @@ int do_netdev_del(Monitor *mon, const QDict *qdict, QObject **ret_data)
>> return 0;
>> }
>>
>> -static void print_net_client(Monitor *mon, NetClientState *vc)
>> +void print_net_client(Monitor *mon, NetClientState *vc)
>> {
>> monitor_printf(mon, "%s: type=%s,%s\n", vc->name,
>> net_client_types[vc->info->type].type, vc->info_str);
>> @@ -1079,12 +1085,17 @@ void do_info_network(Monitor *mon)
>> NetClientState *nc, *peer;
>> net_client_type type;
>>
>> - monitor_printf(mon, "Devices not on any VLAN:\n");
>> + net_hub_info(mon);
>> +
>> QTAILQ_FOREACH(nc, &net_clients, next) {
>> peer = nc->peer;
>> type = nc->info->type;
>> +
>> + if (net_hub_port_peer_nc(nc)) {
>> + continue;
>> + }
>> +
>> if (!peer || type == NET_CLIENT_TYPE_NIC) {
>> - monitor_printf(mon, " ");
>> print_net_client(mon, nc);
>> } /* else it's a netdev connected to a NIC, printed with the NIC */
>> if (peer && type == NET_CLIENT_TYPE_NIC) {
>> @@ -1092,7 +1103,6 @@ void do_info_network(Monitor *mon)
>> print_net_client(mon, peer);
>> }
>> }
>> - net_hub_info(mon);
>
> Why introduce a different hub output format at all? Do it in the final
> right from the start.
>
>> }
>>
>> void qmp_set_link(const char *name, bool up, Error **errp)
>> diff --git a/net.h b/net.h
>> index 250669a..08306a4 100644
>> --- a/net.h
>> +++ b/net.h
>> @@ -112,6 +112,18 @@ void qemu_check_nic_model(NICInfo *nd, const char *model);
>> int qemu_find_nic_model(NICInfo *nd, const char * const *models,
>> const char *default_model);
>>
>> +ssize_t qemu_deliver_packet(NetClientState *sender,
>> + unsigned flags,
>> + const uint8_t *data,
>> + size_t size,
>> + void *opaque);
>> +ssize_t qemu_deliver_packet_iov(NetClientState *sender,
>> + unsigned flags,
>> + const struct iovec *iov,
>> + int iovcnt,
>> + void *opaque);
>> +
>
> I bet those two prototypes are required by some other patch (or are even
> redundant).
I have noticed this, and split out them to other patch.
>
>> +void print_net_client(Monitor *mon, NetClientState *vc);
>> void do_info_network(Monitor *mon);
>>
>> /* NIC info */
>> diff --git a/net/hub.c b/net/hub.c
>> index 122de69..8c77d03 100644
>> --- a/net/hub.c
>> +++ b/net/hub.c
>> @@ -184,6 +184,25 @@ NetClientState *net_hub_find_client_by_name(unsigned int hub_id,
>> }
>>
>> /**
>> + * Determine if one nc peers with one hub port
>> + */
>> +bool net_hub_port_peer_nc(NetClientState *nc)
>> +{
>> + NetHub *hub;
>> + NetHubPort *port;
>> +
>> + QLIST_FOREACH(hub, &hubs, next) {
>> + QLIST_FOREACH(port, &hub->ports, next) {
>> + if (nc == port->nc.peer) {
>> + return true;
>> + }
>> + }
>> + }
>> +
>> + return false;
>> +}
>> +
>> +/**
>> * Print hub configuration
>> */
>> void net_hub_info(Monitor *mon)
>> @@ -194,8 +213,8 @@ void net_hub_info(Monitor *mon)
>> QLIST_FOREACH(hub, &hubs, next) {
>> monitor_printf(mon, "hub %u\n", hub->id);
>> QLIST_FOREACH(port, &hub->ports, next) {
>> - monitor_printf(mon, " port %u peer %s\n", port->id,
>> - port->nc.peer ? port->nc.peer->name : "<none>");
>> + monitor_printf(mon, " \\ ");
This will have the following layout:
(qemu) info network
hub 1
\ dump.0: type=dump,dump to qemu-vlan1.pcap (len=65536)
\ user.1: type=user,net=10.0.2.0,restrict=off
\ virtio-net-pci.0: type=nic,model=virtio-net-pci,macaddr=52:54:00:12:34:58
hub 0
\ user.0: type=user,net=10.0.2.0,restrict=off
\ e1000.0: type=nic,model=e1000,macaddr=52:54:00:12:34:57
virtio-net-pci.1: type=nic,model=virtio-net-pci,macaddr=52:54:00:12:34:56
\ ur: type=tap,ifname=tap0,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown
^^^
>
> Two space too much of indention (you remove them above for the existing
It is three space, not two.
> peer \ peer outputs).
Do you mean that it should be like "monitor_printf(mon, "\\ ");" but
this indention will not match with those peers in hub case.
>
>> + print_net_client(mon, port->nc.peer);
>> }
>> }
>> }
>> diff --git a/net/hub.h b/net/hub.h
>> index ff5024a..550189b 100644
>> --- a/net/hub.h
>> +++ b/net/hub.h
>> @@ -23,5 +23,6 @@ NetClientState *net_hub_find_client_by_name(unsigned int hub_id,
>> void net_hub_info(Monitor *mon);
>> int net_hub_id_for_client(NetClientState *nc, unsigned int *id);
>> void net_hub_check_clients(void);
>> +bool net_hub_port_peer_nc(NetClientState *nc);
>>
>> #endif /* NET_HUB_H */
>
> Jan
>
> --
> Siemens AG, Corporate Technology, CT T DE IT 1
> Corporate Competence Center Embedded Linux
--
Regards,
Zhi Yong Wu
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [Qemu-devel] [PATCH v4 13/16] net: Make "info network" output more readable info
2012-05-25 14:25 ` Zhi Yong Wu
@ 2012-05-25 14:40 ` Jan Kiszka
2012-05-25 14:44 ` Zhi Yong Wu
0 siblings, 1 reply; 9+ messages in thread
From: Jan Kiszka @ 2012-05-25 14:40 UTC (permalink / raw)
To: Zhi Yong Wu
Cc: pbonzini@redhat.com, wuzhy@linux.vnet.ibm.com,
qemu-devel@nongnu.org, kvm@vger.kernel.org,
stefanha@linux.vnet.ibm.com
On 2012-05-25 11:25, Zhi Yong Wu wrote:
>>> diff --git a/net/hub.c b/net/hub.c
>>> index 122de69..8c77d03 100644
>>> --- a/net/hub.c
>>> +++ b/net/hub.c
>>> @@ -184,6 +184,25 @@ NetClientState *net_hub_find_client_by_name(unsigned int hub_id,
>>> }
>>>
>>> /**
>>> + * Determine if one nc peers with one hub port
>>> + */
>>> +bool net_hub_port_peer_nc(NetClientState *nc)
>>> +{
>>> + NetHub *hub;
>>> + NetHubPort *port;
>>> +
>>> + QLIST_FOREACH(hub, &hubs, next) {
>>> + QLIST_FOREACH(port, &hub->ports, next) {
>>> + if (nc == port->nc.peer) {
>>> + return true;
>>> + }
>>> + }
>>> + }
>>> +
>>> + return false;
>>> +}
>>> +
>>> +/**
>>> * Print hub configuration
>>> */
>>> void net_hub_info(Monitor *mon)
>>> @@ -194,8 +213,8 @@ void net_hub_info(Monitor *mon)
>>> QLIST_FOREACH(hub, &hubs, next) {
>>> monitor_printf(mon, "hub %u\n", hub->id);
>>> QLIST_FOREACH(port, &hub->ports, next) {
>>> - monitor_printf(mon, " port %u peer %s\n", port->id,
>>> - port->nc.peer ? port->nc.peer->name : "<none>");
>>> + monitor_printf(mon, " \\ ");
> This will have the following layout:
> (qemu) info network
> hub 1
> \ dump.0: type=dump,dump to qemu-vlan1.pcap (len=65536)
> \ user.1: type=user,net=10.0.2.0,restrict=off
> \ virtio-net-pci.0: type=nic,model=virtio-net-pci,macaddr=52:54:00:12:34:58
> hub 0
> \ user.0: type=user,net=10.0.2.0,restrict=off
> \ e1000.0: type=nic,model=e1000,macaddr=52:54:00:12:34:57
> virtio-net-pci.1: type=nic,model=virtio-net-pci,macaddr=52:54:00:12:34:56
> \ ur: type=tap,ifname=tap0,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown
> ^^^
>>
>> Two space too much of indention (you remove them above for the existing
> It is three space, not two.
>> peer \ peer outputs).
> Do you mean that it should be like "monitor_printf(mon, "\\ ");" but
> this indention will not match with those peers in hub case.
This line is for printing peers attached to a hub, isn't it? So it
should be exactly one space, like for the non-hub peers. You should see
it better than I when running the code.
Jan
--
Siemens AG, Corporate Technology, CT T DE IT 1
Corporate Competence Center Embedded Linux
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [Qemu-devel] [PATCH v4 13/16] net: Make "info network" output more readable info
2012-05-25 14:40 ` Jan Kiszka
@ 2012-05-25 14:44 ` Zhi Yong Wu
2012-05-25 14:50 ` Jan Kiszka
0 siblings, 1 reply; 9+ messages in thread
From: Zhi Yong Wu @ 2012-05-25 14:44 UTC (permalink / raw)
To: Jan Kiszka
Cc: pbonzini@redhat.com, wuzhy@linux.vnet.ibm.com,
qemu-devel@nongnu.org, kvm@vger.kernel.org,
stefanha@linux.vnet.ibm.com
On Fri, May 25, 2012 at 10:40 PM, Jan Kiszka <jan.kiszka@siemens.com> wrote:
> On 2012-05-25 11:25, Zhi Yong Wu wrote:
>>>> diff --git a/net/hub.c b/net/hub.c
>>>> index 122de69..8c77d03 100644
>>>> --- a/net/hub.c
>>>> +++ b/net/hub.c
>>>> @@ -184,6 +184,25 @@ NetClientState *net_hub_find_client_by_name(unsigned int hub_id,
>>>> }
>>>>
>>>> /**
>>>> + * Determine if one nc peers with one hub port
>>>> + */
>>>> +bool net_hub_port_peer_nc(NetClientState *nc)
>>>> +{
>>>> + NetHub *hub;
>>>> + NetHubPort *port;
>>>> +
>>>> + QLIST_FOREACH(hub, &hubs, next) {
>>>> + QLIST_FOREACH(port, &hub->ports, next) {
>>>> + if (nc == port->nc.peer) {
>>>> + return true;
>>>> + }
>>>> + }
>>>> + }
>>>> +
>>>> + return false;
>>>> +}
>>>> +
>>>> +/**
>>>> * Print hub configuration
>>>> */
>>>> void net_hub_info(Monitor *mon)
>>>> @@ -194,8 +213,8 @@ void net_hub_info(Monitor *mon)
>>>> QLIST_FOREACH(hub, &hubs, next) {
>>>> monitor_printf(mon, "hub %u\n", hub->id);
>>>> QLIST_FOREACH(port, &hub->ports, next) {
>>>> - monitor_printf(mon, " port %u peer %s\n", port->id,
>>>> - port->nc.peer ? port->nc.peer->name : "<none>");
>>>> + monitor_printf(mon, " \\ ");
>> This will have the following layout:
>> (qemu) info network
>> hub 1
>> \ dump.0: type=dump,dump to qemu-vlan1.pcap (len=65536)
>> \ user.1: type=user,net=10.0.2.0,restrict=off
>> \ virtio-net-pci.0: type=nic,model=virtio-net-pci,macaddr=52:54:00:12:34:58
>> hub 0
>> \ user.0: type=user,net=10.0.2.0,restrict=off
>> \ e1000.0: type=nic,model=e1000,macaddr=52:54:00:12:34:57
>> virtio-net-pci.1: type=nic,model=virtio-net-pci,macaddr=52:54:00:12:34:56
>> \ ur: type=tap,ifname=tap0,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown
>> ^^^
>>>
>>> Two space too much of indention (you remove them above for the existing
>> It is three space, not two.
>>> peer \ peer outputs).
>> Do you mean that it should be like "monitor_printf(mon, "\\ ");" but
>> this indention will not match with those peers in hub case.
>
> This line is for printing peers attached to a hub, isn't it? So it
Yeah, but it is three spaces, not one. You can check the code in
do_info_network. For non-hub peers, it is also three spaces.
> should be exactly one space, like for the non-hub peers. You should see
> it better than I when running the code.
That is the result i got when i was running the code.
>
> Jan
>
> --
> Siemens AG, Corporate Technology, CT T DE IT 1
> Corporate Competence Center Embedded Linux
--
Regards,
Zhi Yong Wu
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [Qemu-devel] [PATCH v4 13/16] net: Make "info network" output more readable info
2012-05-25 14:44 ` Zhi Yong Wu
@ 2012-05-25 14:50 ` Jan Kiszka
2012-05-25 14:56 ` Zhi Yong Wu
0 siblings, 1 reply; 9+ messages in thread
From: Jan Kiszka @ 2012-05-25 14:50 UTC (permalink / raw)
To: Zhi Yong Wu
Cc: pbonzini@redhat.com, wuzhy@linux.vnet.ibm.com,
qemu-devel@nongnu.org, kvm@vger.kernel.org,
stefanha@linux.vnet.ibm.com
On 2012-05-25 11:44, Zhi Yong Wu wrote:
> On Fri, May 25, 2012 at 10:40 PM, Jan Kiszka <jan.kiszka@siemens.com> wrote:
>> On 2012-05-25 11:25, Zhi Yong Wu wrote:
>>>>> diff --git a/net/hub.c b/net/hub.c
>>>>> index 122de69..8c77d03 100644
>>>>> --- a/net/hub.c
>>>>> +++ b/net/hub.c
>>>>> @@ -184,6 +184,25 @@ NetClientState *net_hub_find_client_by_name(unsigned int hub_id,
>>>>> }
>>>>>
>>>>> /**
>>>>> + * Determine if one nc peers with one hub port
>>>>> + */
>>>>> +bool net_hub_port_peer_nc(NetClientState *nc)
>>>>> +{
>>>>> + NetHub *hub;
>>>>> + NetHubPort *port;
>>>>> +
>>>>> + QLIST_FOREACH(hub, &hubs, next) {
>>>>> + QLIST_FOREACH(port, &hub->ports, next) {
>>>>> + if (nc == port->nc.peer) {
>>>>> + return true;
>>>>> + }
>>>>> + }
>>>>> + }
>>>>> +
>>>>> + return false;
>>>>> +}
>>>>> +
>>>>> +/**
>>>>> * Print hub configuration
>>>>> */
>>>>> void net_hub_info(Monitor *mon)
>>>>> @@ -194,8 +213,8 @@ void net_hub_info(Monitor *mon)
>>>>> QLIST_FOREACH(hub, &hubs, next) {
>>>>> monitor_printf(mon, "hub %u\n", hub->id);
>>>>> QLIST_FOREACH(port, &hub->ports, next) {
>>>>> - monitor_printf(mon, " port %u peer %s\n", port->id,
>>>>> - port->nc.peer ? port->nc.peer->name : "<none>");
>>>>> + monitor_printf(mon, " \\ ");
>>> This will have the following layout:
>>> (qemu) info network
>>> hub 1
>>> \ dump.0: type=dump,dump to qemu-vlan1.pcap (len=65536)
>>> \ user.1: type=user,net=10.0.2.0,restrict=off
>>> \ virtio-net-pci.0: type=nic,model=virtio-net-pci,macaddr=52:54:00:12:34:58
>>> hub 0
>>> \ user.0: type=user,net=10.0.2.0,restrict=off
>>> \ e1000.0: type=nic,model=e1000,macaddr=52:54:00:12:34:57
>>> virtio-net-pci.1: type=nic,model=virtio-net-pci,macaddr=52:54:00:12:34:56
>>> \ ur: type=tap,ifname=tap0,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown
>>> ^^^
>>>>
>>>> Two space too much of indention (you remove them above for the existing
>>> It is three space, not two.
>>>> peer \ peer outputs).
>>> Do you mean that it should be like "monitor_printf(mon, "\\ ");" but
>>> this indention will not match with those peers in hub case.
>>
>> This line is for printing peers attached to a hub, isn't it? So it
> Yeah, but it is three spaces, not one. You can check the code in
> do_info_network. For non-hub peers, it is also three spaces.
Then non-hub needs adjustment to a single space as well. Just remove the
two spaces I added to indent the categories (VLAN vs. non-VLAN listing)
for _both_ peer lines.
(I love nit-picking discussions :) )
Jan
--
Siemens AG, Corporate Technology, CT T DE IT 1
Corporate Competence Center Embedded Linux
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [Qemu-devel] [PATCH v4 13/16] net: Make "info network" output more readable info
2012-05-25 14:50 ` Jan Kiszka
@ 2012-05-25 14:56 ` Zhi Yong Wu
0 siblings, 0 replies; 9+ messages in thread
From: Zhi Yong Wu @ 2012-05-25 14:56 UTC (permalink / raw)
To: Jan Kiszka
Cc: pbonzini@redhat.com, wuzhy@linux.vnet.ibm.com,
qemu-devel@nongnu.org, kvm@vger.kernel.org,
stefanha@linux.vnet.ibm.com
On Fri, May 25, 2012 at 10:50 PM, Jan Kiszka <jan.kiszka@siemens.com> wrote:
> On 2012-05-25 11:44, Zhi Yong Wu wrote:
>> On Fri, May 25, 2012 at 10:40 PM, Jan Kiszka <jan.kiszka@siemens.com> wrote:
>>> On 2012-05-25 11:25, Zhi Yong Wu wrote:
>>>>>> diff --git a/net/hub.c b/net/hub.c
>>>>>> index 122de69..8c77d03 100644
>>>>>> --- a/net/hub.c
>>>>>> +++ b/net/hub.c
>>>>>> @@ -184,6 +184,25 @@ NetClientState *net_hub_find_client_by_name(unsigned int hub_id,
>>>>>> }
>>>>>>
>>>>>> /**
>>>>>> + * Determine if one nc peers with one hub port
>>>>>> + */
>>>>>> +bool net_hub_port_peer_nc(NetClientState *nc)
>>>>>> +{
>>>>>> + NetHub *hub;
>>>>>> + NetHubPort *port;
>>>>>> +
>>>>>> + QLIST_FOREACH(hub, &hubs, next) {
>>>>>> + QLIST_FOREACH(port, &hub->ports, next) {
>>>>>> + if (nc == port->nc.peer) {
>>>>>> + return true;
>>>>>> + }
>>>>>> + }
>>>>>> + }
>>>>>> +
>>>>>> + return false;
>>>>>> +}
>>>>>> +
>>>>>> +/**
>>>>>> * Print hub configuration
>>>>>> */
>>>>>> void net_hub_info(Monitor *mon)
>>>>>> @@ -194,8 +213,8 @@ void net_hub_info(Monitor *mon)
>>>>>> QLIST_FOREACH(hub, &hubs, next) {
>>>>>> monitor_printf(mon, "hub %u\n", hub->id);
>>>>>> QLIST_FOREACH(port, &hub->ports, next) {
>>>>>> - monitor_printf(mon, " port %u peer %s\n", port->id,
>>>>>> - port->nc.peer ? port->nc.peer->name : "<none>");
>>>>>> + monitor_printf(mon, " \\ ");
>>>> This will have the following layout:
>>>> (qemu) info network
>>>> hub 1
>>>> \ dump.0: type=dump,dump to qemu-vlan1.pcap (len=65536)
>>>> \ user.1: type=user,net=10.0.2.0,restrict=off
>>>> \ virtio-net-pci.0: type=nic,model=virtio-net-pci,macaddr=52:54:00:12:34:58
>>>> hub 0
>>>> \ user.0: type=user,net=10.0.2.0,restrict=off
>>>> \ e1000.0: type=nic,model=e1000,macaddr=52:54:00:12:34:57
>>>> virtio-net-pci.1: type=nic,model=virtio-net-pci,macaddr=52:54:00:12:34:56
>>>> \ ur: type=tap,ifname=tap0,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown
>>>> ^^^
>>>>>
>>>>> Two space too much of indention (you remove them above for the existing
>>>> It is three space, not two.
>>>>> peer \ peer outputs).
>>>> Do you mean that it should be like "monitor_printf(mon, "\\ ");" but
>>>> this indention will not match with those peers in hub case.
>>>
>>> This line is for printing peers attached to a hub, isn't it? So it
>> Yeah, but it is three spaces, not one. You can check the code in
>> do_info_network. For non-hub peers, it is also three spaces.
>
> Then non-hub needs adjustment to a single space as well. Just remove the
> two spaces I added to indent the categories (VLAN vs. non-VLAN listing)
OK, done
> for _both_ peer lines.
>
> (I love nit-picking discussions :) )
No matter. :)
>
> Jan
>
> --
> Siemens AG, Corporate Technology, CT T DE IT 1
> Corporate Competence Center Embedded Linux
--
Regards,
Zhi Yong Wu
^ permalink raw reply [flat|nested] 9+ messages in thread
* [Qemu-devel] [PATCH v4 13/16] net: Make "info network" output more readable info
@ 2012-05-25 14:11 zwu.kernel
0 siblings, 0 replies; 9+ messages in thread
From: zwu.kernel @ 2012-05-25 14:11 UTC (permalink / raw)
To: qemu-devel; +Cc: pbonzini, wuzhy, stefanha, kvm, jan.kiszka
From: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
---
net.c | 18 ++++++++++++++----
net.h | 1 +
net/hub.c | 23 +++++++++++++++++++++--
net/hub.h | 1 +
4 files changed, 37 insertions(+), 6 deletions(-)
diff --git a/net.c b/net.c
index 61dc28d..ae0deec 100644
--- a/net.c
+++ b/net.c
@@ -887,6 +887,12 @@ static const struct {
},
},
#endif /* CONFIG_NET_BRIDGE */
+ [NET_CLIENT_TYPE_HUB] = {
+ .type = "hubport",
+ .desc = {
+ { /* end of list */ }
+ },
+ },
};
int net_client_init(Monitor *mon, QemuOpts *opts, int is_netdev)
@@ -1068,7 +1074,7 @@ int do_netdev_del(Monitor *mon, const QDict *qdict, QObject **ret_data)
return 0;
}
-static void print_net_client(Monitor *mon, NetClientState *vc)
+void print_net_client(Monitor *mon, NetClientState *vc)
{
monitor_printf(mon, "%s: type=%s,%s\n", vc->name,
net_client_types[vc->info->type].type, vc->info_str);
@@ -1079,12 +1085,17 @@ void do_info_network(Monitor *mon)
NetClientState *nc, *peer;
net_client_type type;
- monitor_printf(mon, "Devices not on any VLAN:\n");
+ net_hub_info(mon);
+
QTAILQ_FOREACH(nc, &net_clients, next) {
peer = nc->peer;
type = nc->info->type;
+
+ if (net_hub_port_peer_nc(nc)) {
+ continue;
+ }
+
if (!peer || type == NET_CLIENT_TYPE_NIC) {
- monitor_printf(mon, " ");
print_net_client(mon, nc);
} /* else it's a netdev connected to a NIC, printed with the NIC */
if (peer && type == NET_CLIENT_TYPE_NIC) {
@@ -1092,7 +1103,6 @@ void do_info_network(Monitor *mon)
print_net_client(mon, peer);
}
}
- net_hub_info(mon);
}
void qmp_set_link(const char *name, bool up, Error **errp)
diff --git a/net.h b/net.h
index 250669a..0692283 100644
--- a/net.h
+++ b/net.h
@@ -112,6 +112,7 @@ void qemu_check_nic_model(NICInfo *nd, const char *model);
int qemu_find_nic_model(NICInfo *nd, const char * const *models,
const char *default_model);
+void print_net_client(Monitor *mon, NetClientState *vc);
void do_info_network(Monitor *mon);
/* NIC info */
diff --git a/net/hub.c b/net/hub.c
index 122de69..8c77d03 100644
--- a/net/hub.c
+++ b/net/hub.c
@@ -184,6 +184,25 @@ NetClientState *net_hub_find_client_by_name(unsigned int hub_id,
}
/**
+ * Determine if one nc peers with one hub port
+ */
+bool net_hub_port_peer_nc(NetClientState *nc)
+{
+ NetHub *hub;
+ NetHubPort *port;
+
+ QLIST_FOREACH(hub, &hubs, next) {
+ QLIST_FOREACH(port, &hub->ports, next) {
+ if (nc == port->nc.peer) {
+ return true;
+ }
+ }
+ }
+
+ return false;
+}
+
+/**
* Print hub configuration
*/
void net_hub_info(Monitor *mon)
@@ -194,8 +213,8 @@ void net_hub_info(Monitor *mon)
QLIST_FOREACH(hub, &hubs, next) {
monitor_printf(mon, "hub %u\n", hub->id);
QLIST_FOREACH(port, &hub->ports, next) {
- monitor_printf(mon, " port %u peer %s\n", port->id,
- port->nc.peer ? port->nc.peer->name : "<none>");
+ monitor_printf(mon, " \\ ");
+ print_net_client(mon, port->nc.peer);
}
}
}
diff --git a/net/hub.h b/net/hub.h
index ff5024a..550189b 100644
--- a/net/hub.h
+++ b/net/hub.h
@@ -23,5 +23,6 @@ NetClientState *net_hub_find_client_by_name(unsigned int hub_id,
void net_hub_info(Monitor *mon);
int net_hub_id_for_client(NetClientState *nc, unsigned int *id);
void net_hub_check_clients(void);
+bool net_hub_port_peer_nc(NetClientState *nc);
#endif /* NET_HUB_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 9+ messages in thread* [Qemu-devel] [PATCH v4 00/16] hub-based networking patches
@ 2012-06-04 5:29 zwu.kernel
2012-06-04 5:29 ` [Qemu-devel] [PATCH v4 13/16] net: Make "info network" output more readable info zwu.kernel
0 siblings, 1 reply; 9+ messages in thread
From: zwu.kernel @ 2012-06-04 5:29 UTC (permalink / raw)
To: qemu-devel; +Cc: aliguori, stefanha, jan.kiszka, Zhi Yong Wu, luowenj, pbonzini
From: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
All comments from other guys were addressed.
The following changes since commit a854972f8cdec0148087789d62777d8f7176933d:
Update version to open the 1.2 development branch (Fri Jun 1 16:56:16 2012 +0800)
are available in the git repository at:
git@github.com:wuzhy/qemu.git for-anthony
Changelog from v3:
1.) refactor hub own flow control [paolo]
2.) refactor the output for monitor command "info network" [jan kiszka]
v3:
1.) add the support for hub own flow control [paolo]
2.) make the monitor output more reasonable hub info [jan kiszka]
v2:
1.) cleanup some obsolete vlan info
2.) cleanup deliver/deliver_iov func pointers [paolo]
3.) support more flexible flow control [paolo]
Stefan Hajnoczi (12):
net: Add a hub net client
net: Use hubs for the vlan feature
net: Look up 'vlan' net clients using hubs
hub: Check that hubs are configured correctly
net: Drop vlan argument to qemu_new_net_client()
net: Remove vlan qdev property
net: Remove vlan code from net.c
net: Remove VLANState
net: Rename non_vlan_clients to net_clients
net: Rename VLANClientState to NetClientState
net: Rename vc local variables to nc
net: Rename qemu_del_vlan_client() to qemu_del_net_client()
Zhi Yong Wu (4):
net: Make "info network" output more readable info
net: cleanup deliver/deliver_iov func pointers
net: determine if packets can be sent before net queue deliver
packets
hub: add the support for hub own flow control
Makefile.objs | 2 +-
hw/cadence_gem.c | 8 +-
hw/dp8393x.c | 6 +-
hw/e1000.c | 10 +-
hw/eepro100.c | 8 +-
hw/etraxfs_eth.c | 8 +-
hw/lan9118.c | 8 +-
hw/lance.c | 2 +-
hw/mcf_fec.c | 6 +-
hw/milkymist-minimac2.c | 6 +-
hw/mipsnet.c | 6 +-
hw/musicpal.c | 6 +-
hw/ne2000-isa.c | 2 +-
hw/ne2000.c | 8 +-
hw/ne2000.h | 4 +-
hw/opencores_eth.c | 8 +-
hw/pcnet-pci.c | 4 +-
hw/pcnet.c | 6 +-
hw/pcnet.h | 6 +-
hw/qdev-properties.c | 78 +------
hw/qdev.c | 2 -
hw/qdev.h | 8 +-
hw/rtl8139.c | 10 +-
hw/smc91c111.c | 6 +-
hw/spapr_llan.c | 4 +-
hw/stellaris_enet.c | 6 +-
hw/usb/dev-network.c | 8 +-
hw/vhost_net.c | 24 +-
hw/vhost_net.h | 2 +-
hw/virtio-net.c | 12 +-
hw/xen_nic.c | 7 +-
hw/xgmac.c | 6 +-
hw/xilinx_axienet.c | 6 +-
hw/xilinx_ethlite.c | 6 +-
net.c | 605 ++++++++++++++---------------------------------
net.h | 86 ++++----
net/dump.c | 28 ++-
net/dump.h | 2 +-
net/hub.c | 310 ++++++++++++++++++++++++
net/hub.h | 28 +++
net/queue.c | 37 ++--
net/queue.h | 25 +--
net/slirp.c | 32 +--
net/slirp.h | 2 +-
net/socket.c | 66 +++---
net/socket.h | 2 +-
net/tap-win32.c | 27 +-
net/tap.c | 45 ++--
net/tap.h | 21 +-
net/vde.c | 17 +-
net/vde.h | 3 +-
qemu-common.h | 3 +-
slirp/if.c | 5 -
slirp/libslirp.h | 1 -
54 files changed, 818 insertions(+), 826 deletions(-)
create mode 100644 net/hub.c
create mode 100644 net/hub.h
--
1.7.6
^ permalink raw reply [flat|nested] 9+ messages in thread* [Qemu-devel] [PATCH v4 13/16] net: Make "info network" output more readable info
2012-06-04 5:29 [Qemu-devel] [PATCH v4 00/16] hub-based networking patches zwu.kernel
@ 2012-06-04 5:29 ` zwu.kernel
0 siblings, 0 replies; 9+ messages in thread
From: zwu.kernel @ 2012-06-04 5:29 UTC (permalink / raw)
To: qemu-devel; +Cc: aliguori, stefanha, jan.kiszka, Zhi Yong Wu, luowenj, pbonzini
From: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
---
net.c | 14 +++++++++-----
net.h | 1 +
net/hub.c | 23 +++++++++++++++++++++--
net/hub.h | 1 +
4 files changed, 32 insertions(+), 7 deletions(-)
diff --git a/net.c b/net.c
index 61dc28d..6cedc7a 100644
--- a/net.c
+++ b/net.c
@@ -1068,7 +1068,7 @@ int do_netdev_del(Monitor *mon, const QDict *qdict, QObject **ret_data)
return 0;
}
-static void print_net_client(Monitor *mon, NetClientState *vc)
+void print_net_client(Monitor *mon, NetClientState *vc)
{
monitor_printf(mon, "%s: type=%s,%s\n", vc->name,
net_client_types[vc->info->type].type, vc->info_str);
@@ -1079,20 +1079,24 @@ void do_info_network(Monitor *mon)
NetClientState *nc, *peer;
net_client_type type;
- monitor_printf(mon, "Devices not on any VLAN:\n");
+ net_hub_info(mon);
+
QTAILQ_FOREACH(nc, &net_clients, next) {
peer = nc->peer;
type = nc->info->type;
+
+ if (net_hub_port_peer_nc(nc)) {
+ continue;
+ }
+
if (!peer || type == NET_CLIENT_TYPE_NIC) {
- monitor_printf(mon, " ");
print_net_client(mon, nc);
} /* else it's a netdev connected to a NIC, printed with the NIC */
if (peer && type == NET_CLIENT_TYPE_NIC) {
- monitor_printf(mon, " \\ ");
+ monitor_printf(mon, " \\ ");
print_net_client(mon, peer);
}
}
- net_hub_info(mon);
}
void qmp_set_link(const char *name, bool up, Error **errp)
diff --git a/net.h b/net.h
index 250669a..0692283 100644
--- a/net.h
+++ b/net.h
@@ -112,6 +112,7 @@ void qemu_check_nic_model(NICInfo *nd, const char *model);
int qemu_find_nic_model(NICInfo *nd, const char * const *models,
const char *default_model);
+void print_net_client(Monitor *mon, NetClientState *vc);
void do_info_network(Monitor *mon);
/* NIC info */
diff --git a/net/hub.c b/net/hub.c
index 122de69..230d86a 100644
--- a/net/hub.c
+++ b/net/hub.c
@@ -184,6 +184,25 @@ NetClientState *net_hub_find_client_by_name(unsigned int hub_id,
}
/**
+ * Determine if one nc peers with one hub port
+ */
+bool net_hub_port_peer_nc(NetClientState *nc)
+{
+ NetHub *hub;
+ NetHubPort *port;
+
+ QLIST_FOREACH(hub, &hubs, next) {
+ QLIST_FOREACH(port, &hub->ports, next) {
+ if (nc == port->nc.peer) {
+ return true;
+ }
+ }
+ }
+
+ return false;
+}
+
+/**
* Print hub configuration
*/
void net_hub_info(Monitor *mon)
@@ -194,8 +213,8 @@ void net_hub_info(Monitor *mon)
QLIST_FOREACH(hub, &hubs, next) {
monitor_printf(mon, "hub %u\n", hub->id);
QLIST_FOREACH(port, &hub->ports, next) {
- monitor_printf(mon, " port %u peer %s\n", port->id,
- port->nc.peer ? port->nc.peer->name : "<none>");
+ monitor_printf(mon, " \\ ");
+ print_net_client(mon, port->nc.peer);
}
}
}
diff --git a/net/hub.h b/net/hub.h
index ff5024a..550189b 100644
--- a/net/hub.h
+++ b/net/hub.h
@@ -23,5 +23,6 @@ NetClientState *net_hub_find_client_by_name(unsigned int hub_id,
void net_hub_info(Monitor *mon);
int net_hub_id_for_client(NetClientState *nc, unsigned int *id);
void net_hub_check_clients(void);
+bool net_hub_port_peer_nc(NetClientState *nc);
#endif /* NET_HUB_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 9+ messages in thread
end of thread, other threads:[~2012-06-04 5:30 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-05-25 14:02 [Qemu-devel] [PATCH v4 13/16] net: Make "info network" output more readable info zwu.kernel
2012-05-25 14:17 ` Jan Kiszka
2012-05-25 14:25 ` Zhi Yong Wu
2012-05-25 14:40 ` Jan Kiszka
2012-05-25 14:44 ` Zhi Yong Wu
2012-05-25 14:50 ` Jan Kiszka
2012-05-25 14:56 ` Zhi Yong Wu
-- strict thread matches above, loose matches on Subject: below --
2012-05-25 14:11 zwu.kernel
2012-06-04 5:29 [Qemu-devel] [PATCH v4 00/16] hub-based networking patches zwu.kernel
2012-06-04 5:29 ` [Qemu-devel] [PATCH v4 13/16] net: Make "info network" output more readable info zwu.kernel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).