From: Jan Kiszka <jan.kiszka@siemens.com>
To: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: Alex Williamson <alex.williamson@redhat.com>,
"qemu-devel@nongnu.org" <qemu-devel@nongnu.org>,
"kvm-ppc@vger.kernel.org" <kvm-ppc@vger.kernel.org>
Subject: Re: [Qemu-devel] [PATCH] msi/msix: added functions to API to set up message address, and data
Date: Thu, 21 Jun 2012 08:53:14 +0200 [thread overview]
Message-ID: <4FE2C4DA.40403@siemens.com> (raw)
In-Reply-To: <4FE2C33E.1080808@ozlabs.ru>
On 2012-06-21 08:46, Alexey Kardashevskiy wrote:
>
> Ok, another try. Is it any better now? :)
No - posted the old version accidentally?
Jan
>
>
> Normally QEMU expects the guest to initialize MSI/MSIX vectors.
> However on POWER the guest uses RTAS subsystem to configure MSI/MSIX and
> does not write these vectors to device's config space or MSIX BAR.
>
> On the other hand, msi_notify()/msix_notify() write to these vectors to
> signal the guest about an interrupt so we have to write correct vectors
> to the devices in order not to change every user of MSI/MSIX.
>
> The first aim is to support MSIX for virtio-pci on POWER. There is
> another patch for POWER coming which introduces a special memory region
> where MSI/MSIX vectors point to.
>
> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
> ---
> hw/msi.c | 14 ++++++++++++++
> hw/msi.h | 1 +
> hw/msix.c | 8 ++++++++
> hw/msix.h | 3 +++
> 4 files changed, 26 insertions(+)
>
> diff --git a/hw/msi.c b/hw/msi.c
> index 5233204..c7b3e6a 100644
> --- a/hw/msi.c
> +++ b/hw/msi.c
> @@ -363,3 +363,17 @@ unsigned int msi_nr_vectors_allocated(const PCIDevice *dev)
> uint16_t flags = pci_get_word(dev->config + msi_flags_off(dev));
> return msi_nr_vectors(flags);
> }
> +
> +void msi_set_address_data(PCIDevice *dev, uint64_t address, uint16_t data)
> +{
> + uint16_t flags = pci_get_word(dev->config + msi_flags_off(dev));
> + bool msi64bit = flags & PCI_MSI_FLAGS_64BIT;
> +
> + if (msi64bit) {
> + pci_set_quad(dev->config + msi_address_lo_off(dev), address);
> + } else {
> + pci_set_long(dev->config + msi_address_lo_off(dev), address);
> + }
> + pci_set_word(dev->config + msi_data_off(dev, msi64bit), data);
> +}
> +
> diff --git a/hw/msi.h b/hw/msi.h
> index 75747ab..353386e 100644
> --- a/hw/msi.h
> +++ b/hw/msi.h
> @@ -39,6 +39,7 @@ void msi_reset(PCIDevice *dev);
> void msi_notify(PCIDevice *dev, unsigned int vector);
> void msi_write_config(PCIDevice *dev, uint32_t addr, uint32_t val, int len);
> unsigned int msi_nr_vectors_allocated(const PCIDevice *dev);
> +void msi_set_address_data(PCIDevice *dev, uint64_t address, uint16_t data);
>
> static inline bool msi_present(const PCIDevice *dev)
> {
> diff --git a/hw/msix.c b/hw/msix.c
> index ded3c55..08e773d 100644
> --- a/hw/msix.c
> +++ b/hw/msix.c
> @@ -526,3 +526,11 @@ void msix_unset_vector_notifiers(PCIDevice *dev)
> dev->msix_vector_use_notifier = NULL;
> dev->msix_vector_release_notifier = NULL;
> }
> +void msix_set_address_data(PCIDevice *dev, int vector,
> + uint64_t address, uint32_t data)
> +{
> + uint8_t *table_entry = dev->msix_table_page + vector * PCI_MSIX_ENTRY_SIZE;
> + pci_set_quad(table_entry + PCI_MSIX_ENTRY_LOWER_ADDR, address);
> + pci_set_long(table_entry + PCI_MSIX_ENTRY_DATA, data);
> + table_entry[PCI_MSIX_ENTRY_VECTOR_CTRL] &= ~PCI_MSIX_ENTRY_CTRL_MASKBIT;
> +}
> diff --git a/hw/msix.h b/hw/msix.h
> index 50aee82..901f101 100644
> --- a/hw/msix.h
> +++ b/hw/msix.h
> @@ -35,4 +35,7 @@ int msix_set_vector_notifiers(PCIDevice *dev,
> MSIVectorUseNotifier use_notifier,
> MSIVectorReleaseNotifier release_notifier);
> void msix_unset_vector_notifiers(PCIDevice *dev);
> +void msix_set_address_data(PCIDevice *dev, int vector,
> + uint64_t address, uint32_t data);
> +
> #endif
>
--
Siemens AG, Corporate Technology, CT T DE IT 1
Corporate Competence Center Embedded Linux
next prev parent reply other threads:[~2012-06-21 6:53 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-14 4:29 [Qemu-devel] [PATCH 0/3] adding MSI/MSIX for PCI on POWER Alexey Kardashevskiy
2012-06-14 4:31 ` [Qemu-devel] [PATCH 1/3] msi/msix: added functions to API to set up message address and data Alexey Kardashevskiy
2012-06-14 4:56 ` Alex Williamson
2012-06-14 5:17 ` Alexey Kardashevskiy
2012-06-14 5:38 ` Alex Williamson
2012-06-14 5:44 ` Alexey Kardashevskiy
2012-06-14 18:37 ` Alex Williamson
2012-06-14 5:45 ` Jan Kiszka
2012-06-21 6:46 ` [Qemu-devel] [PATCH] msi/msix: added functions to API to set up message address, " Alexey Kardashevskiy
2012-06-21 6:53 ` Jan Kiszka [this message]
2012-06-21 7:18 ` [Qemu-devel] [PATCH] msi/msix: added public API to set/get MSI " Alexey Kardashevskiy
2012-06-21 7:39 ` Jan Kiszka
2012-06-21 10:28 ` Alexey Kardashevskiy
2012-06-21 10:38 ` Jan Kiszka
2012-06-21 10:50 ` Alexey Kardashevskiy
2012-06-21 10:56 ` Jan Kiszka
2012-06-21 11:39 ` [Qemu-devel] [PATCH] msi/msix: added API to set MSI message address " Alexey Kardashevskiy
2012-06-21 11:49 ` Jan Kiszka
2012-06-22 1:03 ` Alexey Kardashevskiy
2012-06-22 1:15 ` Alexey Kardashevskiy
2012-07-02 4:28 ` Alexey Kardashevskiy
2012-07-02 7:24 ` Jan Kiszka
2012-07-06 15:36 ` Alexander Graf
2012-07-06 15:58 ` Jan Kiszka
2012-07-11 18:22 ` Alexander Graf
2012-07-18 12:43 ` Michael S. Tsirkin
2012-07-18 13:17 ` Alexey Kardashevskiy
2012-07-18 15:23 ` Michael S. Tsirkin
2012-07-19 0:32 ` Alexey Kardashevskiy
2012-07-19 9:27 ` Michael S. Tsirkin
2012-07-19 14:24 ` Alexey Kardashevskiy
2012-07-19 14:43 ` Michael S. Tsirkin
2012-07-19 14:50 ` Alexey Kardashevskiy
2012-07-19 14:56 ` Michael S. Tsirkin
2012-07-19 0:35 ` Alexey Kardashevskiy
2012-07-19 9:27 ` Michael S. Tsirkin
2012-06-21 15:44 ` [Qemu-devel] [PATCH] msi/msix: added public API to set/get MSI message address, " Alex Williamson
2012-06-14 4:33 ` [Qemu-devel] [PATCH 2/3] pseries: added allocator for a block of IRQs Alexey Kardashevskiy
2012-06-14 4:34 ` [Qemu-devel] [PATCH 3/3] pseries pci: added MSI/MSIX support Alexey Kardashevskiy
2012-06-14 4:42 ` [Qemu-devel] [PATCH 0/3] adding MSI/MSIX for PCI on POWER Alexey Kardashevskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FE2C4DA.40403@siemens.com \
--to=jan.kiszka@siemens.com \
--cc=aik@ozlabs.ru \
--cc=alex.williamson@redhat.com \
--cc=kvm-ppc@vger.kernel.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).