qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Alexey Kardashevskiy <aik@ozlabs.ru>
To: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: qemu-devel@nongnu.org, Jan Kiszka <jan.kiszka@siemens.com>,
	qemu-ppc@nongnu.org, Alexander Graf <agraf@suse.de>,
	David Gibson <david@gibson.dropbear.id.au>
Subject: Re: [Qemu-devel] [PATCH] xics: added end-of-interrupt (EOI) handlers
Date: Fri, 13 Jul 2012 18:04:18 +1000	[thread overview]
Message-ID: <4FFFD682.4000507@ozlabs.ru> (raw)
In-Reply-To: <1341927973-5615-5-git-send-email-aik@ozlabs.ru>

Already outdated :)

On 10/07/12 23:46, Alexey Kardashevskiy wrote:
> Normally when the host driver gets called via interrupt, it disables IRQ
> first, then handles it and enables back. In the case of PCI pass through,
> the actual handling is done by the guest so the host driver needs to know
> when to enable IRQ back.
> 
> The patch introduces add/remove callback API and EOI initialization for
> the XICS interrupt controller.
> 
> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
> ---
>  hw/xics.c |   18 ++++++++++++++++++
>  hw/xics.h |    5 +++++
>  2 files changed, 23 insertions(+)
> 
> diff --git a/hw/xics.c b/hw/xics.c
> index 668a0d6..de7833e 100644
> --- a/hw/xics.c
> +++ b/hw/xics.c
> @@ -170,6 +170,7 @@ struct ics_irq_state {
>      int sent:1;
>      int rejected:1;
>      int masked_pending:1;
> +    NotifierList eoi_notifier;
>  };
>  
>  struct ics_state {
> @@ -309,6 +310,8 @@ static void ics_eoi(struct ics_state *ics, int nr)
>      if (irq->type == XICS_LSI) {
>          irq->sent = 0;
>      }
> +
> +    notifier_list_notify(&irq->eoi_notifier, NULL);
>  }
>  
>  /*
> @@ -536,6 +539,7 @@ struct icp_state *xics_system_init(int nr_irqs)
>      for (i = 0; i < nr_irqs; i++) {
>          ics->irqs[i].priority = 0xff;
>          ics->irqs[i].saved_priority = 0xff;
> +        notifier_list_init(&ics->irqs[i].eoi_notifier);
>      }
>  
>      ics->qirqs = qemu_allocate_irqs(ics_set_irq, ics, nr_irqs);
> @@ -552,3 +556,17 @@ struct icp_state *xics_system_init(int nr_irqs)
>  
>      return icp;
>  }
> +
> +void xics_add_eoi_notifier(Notifier *notify, uint32_t srcno)
> +{
> +    struct ics_state *ics = spapr->icp->ics;
> +    struct ics_irq_state *irq = &ics->irqs[srcno - ics->offset];
> +
> +    notifier_list_add(&irq->eoi_notifier, notify);
> +}
> +
> +void xics_remove_eoi_notifier(Notifier *notify)
> +{
> +    notifier_remove(notify);
> +}
> +
> diff --git a/hw/xics.h b/hw/xics.h
> index 2080159..762243c 100644
> --- a/hw/xics.h
> +++ b/hw/xics.h
> @@ -27,6 +27,8 @@
>  #if !defined(__XICS_H__)
>  #define __XICS_H__
>  
> +#include "notify.h"
> +
>  #define XICS_IPI        0x2
>  
>  struct icp_state;
> @@ -41,4 +43,7 @@ qemu_irq xics_assign_irq(struct icp_state *icp, int irq,
>  
>  struct icp_state *xics_system_init(int nr_irqs);
>  
> +void xics_add_eoi_notifier(Notifier *notify, uint32_t srcno);
> +void xics_remove_eoi_notifier(Notifier *notify);
> +
>  #endif /* __XICS_H__ */
> 


-- 
Alexey

  reply	other threads:[~2012-07-13  8:04 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <no>
2012-07-10 13:46 ` [Qemu-devel] [PATCH] pseries iommu: h_put_tce split to support more IOMMUs Alexey Kardashevskiy
2012-07-10 13:46   ` [Qemu-devel] [PATCH] pseries pci: removed cached qemu_irq from PCI host bus Alexey Kardashevskiy
2012-07-10 13:46   ` [Qemu-devel] [PATCH] pseries: added allocator for a block of IRQs Alexey Kardashevskiy
2012-07-10 13:46   ` [Qemu-devel] [PATCH] pseries pci: enable debugging with disabled emulated PCI bus Alexey Kardashevskiy
2012-07-10 13:46   ` [Qemu-devel] [PATCH] xics: added end-of-interrupt (EOI) handlers Alexey Kardashevskiy
2012-07-13  8:04     ` Alexey Kardashevskiy [this message]
2012-07-10 13:46   ` [Qemu-devel] [PATCH] pseries dma: DMA window params added to PHB and DT population changed Alexey Kardashevskiy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4FFFD682.4000507@ozlabs.ru \
    --to=aik@ozlabs.ru \
    --cc=agraf@suse.de \
    --cc=david@gibson.dropbear.id.au \
    --cc=jan.kiszka@siemens.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).