From: "Philippe Mathieu-Daudé" <philmd@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Gerd Hoffmann" <kraxel@redhat.com>,
"Peter Maydell" <peter.maydell@linaro.org>,
"Marc-André Lureau" <marcandre.lureau@redhat.com>
Subject: Re: [RFC PATCH-for-9.0] hw/display/qxl: Directly use VGACommonState::vram_size
Date: Wed, 13 Dec 2023 18:37:01 +0100 [thread overview]
Message-ID: <4d23f484-a5f3-47e2-a002-26249860f330@linaro.org> (raw)
In-Reply-To: <20231124192216.96413-1-philmd@linaro.org>
ping?
On 24/11/23 20:22, Philippe Mathieu-Daudé wrote:
> PCIQXLDevice::vram_size seems to be some shadow of
> VGACommonState::vram_size. Just use the latter.
>
> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
> ---
> RFC: I don't understand this field otherwise.
> ---
> hw/display/qxl.h | 1 -
> hw/display/qxl.c | 17 ++++++++---------
> 2 files changed, 8 insertions(+), 10 deletions(-)
>
> diff --git a/hw/display/qxl.h b/hw/display/qxl.h
> index fdac14edad..47463bd485 100644
> --- a/hw/display/qxl.h
> +++ b/hw/display/qxl.h
> @@ -102,7 +102,6 @@ struct PCIQXLDevice {
> uint16_t max_outputs;
>
> /* vram pci bar */
> - uint64_t vram_size;
> MemoryRegion vram_bar;
> uint64_t vram32_size;
> MemoryRegion vram32_bar;
> diff --git a/hw/display/qxl.c b/hw/display/qxl.c
> index 7bb00d68f5..0e1c4efc0c 100644
> --- a/hw/display/qxl.c
> +++ b/hw/display/qxl.c
> @@ -2067,20 +2067,19 @@ static void qxl_init_ramsize(PCIQXLDevice *qxl)
>
> /* vram (surfaces, 64bit, bar 4+5) */
> if (qxl->vram_size_mb != -1) {
> - qxl->vram_size = (uint64_t)qxl->vram_size_mb * MiB;
> + qxl->vga.vram_size = (uint64_t)qxl->vram_size_mb * MiB;
> }
> - if (qxl->vram_size < qxl->vram32_size) {
> - qxl->vram_size = qxl->vram32_size;
> + if (qxl->vga.vram_size < qxl->vram32_size) {
> + qxl->vga.vram_size = qxl->vram32_size;
> }
>
> if (qxl->revision == 1) {
> qxl->vram32_size = 4096;
> - qxl->vram_size = 4096;
> + qxl->vga.vram_size = 4096;
> }
> qxl->vgamem_size = pow2ceil(qxl->vgamem_size);
> qxl->vga.vram_size = pow2ceil(qxl->vga.vram_size);
> qxl->vram32_size = pow2ceil(qxl->vram32_size);
> - qxl->vram_size = pow2ceil(qxl->vram_size);
> }
>
> static void qxl_realize_common(PCIQXLDevice *qxl, Error **errp)
> @@ -2135,7 +2134,7 @@ static void qxl_realize_common(PCIQXLDevice *qxl, Error **errp)
>
> qxl->guest_surfaces.cmds = g_new0(QXLPHYSICAL, qxl->ssd.num_surfaces);
> memory_region_init_ram(&qxl->vram_bar, OBJECT(qxl), "qxl.vram",
> - qxl->vram_size, &error_fatal);
> + qxl->vga.vram_size, &error_fatal);
> memory_region_init_alias(&qxl->vram32_bar, OBJECT(qxl), "qxl.vram32",
> &qxl->vram_bar, 0, qxl->vram32_size);
>
> @@ -2159,7 +2158,7 @@ static void qxl_realize_common(PCIQXLDevice *qxl, Error **errp)
> pci_register_bar(&qxl->pci, QXL_VRAM_RANGE_INDEX,
> PCI_BASE_ADDRESS_SPACE_MEMORY, &qxl->vram32_bar);
>
> - if (qxl->vram32_size < qxl->vram_size) {
> + if (qxl->vram32_size < qxl->vga.vram_size) {
> /*
> * Make the 64bit vram bar show up only in case it is
> * configured to be larger than the 32bit vram bar.
> @@ -2177,8 +2176,8 @@ static void qxl_realize_common(PCIQXLDevice *qxl, Error **errp)
> dprint(qxl, 1, "vram/32: %" PRIx64 " MB [region 1]\n",
> qxl->vram32_size / MiB);
> dprint(qxl, 1, "vram/64: %" PRIx64 " MB %s\n",
> - qxl->vram_size / MiB,
> - qxl->vram32_size < qxl->vram_size ? "[region 4]" : "[unmapped]");
> + qxl->vga.vram_size / MiB,
> + qxl->vram32_size < qxl->vga.vram_size ? "[region 4]" : "[unmapped]");
>
> qxl->ssd.qxl.base.sif = &qxl_interface.base;
> if (qemu_spice_add_display_interface(&qxl->ssd.qxl, qxl->vga.con) != 0) {
next prev parent reply other threads:[~2023-12-13 17:37 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-24 19:22 [RFC PATCH-for-9.0] hw/display/qxl: Directly use VGACommonState::vram_size Philippe Mathieu-Daudé
2023-12-13 17:37 ` Philippe Mathieu-Daudé [this message]
2024-01-04 16:45 ` Philippe Mathieu-Daudé
2024-01-09 14:48 ` Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4d23f484-a5f3-47e2-a002-26249860f330@linaro.org \
--to=philmd@linaro.org \
--cc=kraxel@redhat.com \
--cc=marcandre.lureau@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).