Re: [PATCH 5/5] contrib/plugins: add ips plugin example for cost modeling

[Pierrick Bouvier <pierrick.bouvier@linaro.org>]

On 5/28/24 12:57, Alex Bennée wrote:
> Pierrick Bouvier <pierrick.bouvier@linaro.org> writes:
> 
>> On 5/28/24 12:14, Alex Bennée wrote:
>>> Pierrick Bouvier <pierrick.bouvier@linaro.org> writes:
>>>
>>>> This plugin uses the new time control interface to make decisions
>>>> about the state of time during the emulation. The algorithm is
>>>> currently very simple. The user specifies an ips rate which applies
>>>> per core. If the core runs ahead of its allocated execution time the
>>>> plugin sleeps for a bit to let real time catch up. Either way time is
>>>> updated for the emulation as a function of total executed instructions
>>>> with some adjustments for cores that idle.
>>>>
>>>> Examples
>>>> --------
>>>>
>>>> Slow down execution of /bin/true:
>>>> $ num_insn=$(./build/qemu-x86_64 -plugin ./build/tests/plugin/libinsn.so -d plugin /bin/true |& grep total | sed -e 's/.*: //')
>>>> $ time ./build/qemu-x86_64 -plugin ./build/contrib/plugins/libips.so,ips=$(($num_insn/4)) /bin/true
>>>> real 4.000s
>>>>
>>>> Boot a Linux kernel simulating a 250MHz cpu:
>>>> $ /build/qemu-system-x86_64 -kernel /boot/vmlinuz-6.1.0-21-amd64 -append "console=ttyS0" -plugin ./build/contrib/plugins/libips.so,ips=$((250*1000*1000)) -smp 1 -m 512
>>>> check time until kernel panic on serial0
>>>>
>>>> Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
>>>> ---
>>>>    contrib/plugins/ips.c    | 239 +++++++++++++++++++++++++++++++++++++++
>>>>    contrib/plugins/Makefile |   1 +
>>>>    2 files changed, 240 insertions(+)
>>>>    create mode 100644 contrib/plugins/ips.c
>>>>
>>>> diff --git a/contrib/plugins/ips.c b/contrib/plugins/ips.c
>>>> new file mode 100644
>>>> index 00000000000..cf3159df391
>>>> --- /dev/null
>>>> +++ b/contrib/plugins/ips.c
>>>> @@ -0,0 +1,239 @@
>>>> +/*
>>>> + * ips rate limiting plugin.
>>>> + *
>>>> + * This plugin can be used to restrict the execution of a system to a
>>>> + * particular number of Instructions Per Second (ips). This controls
>>>> + * time as seen by the guest so while wall-clock time may be longer
>>>> + * from the guests point of view time will pass at the normal rate.
>>>> + *
>>>> + * This uses the new plugin API which allows the plugin to control
>>>> + * system time.
>>>> + *
>>>> + * Copyright (c) 2023 Linaro Ltd
>>>> + *
>>>> + * SPDX-License-Identifier: GPL-2.0-or-later
>>>> + */
>>>> +
>>>> +#include <stdio.h>
>>>> +#include <glib.h>
>>>> +#include <qemu-plugin.h>
>>>> +
>>>> +QEMU_PLUGIN_EXPORT int qemu_plugin_version = QEMU_PLUGIN_VERSION;
>>>> +
>>>> +/* how many times do we update time per sec */
>>>> +#define NUM_TIME_UPDATE_PER_SEC 10
>>>> +#define NSEC_IN_ONE_SEC (1000 * 1000 * 1000)
>>>> +
>>>> +static GMutex global_state_lock;
>>>> +
>>>> +static uint64_t insn_per_second = 1000 * 1000; /* ips per core, per second */
>>>> +static uint64_t insn_quantum; /* trap every N instructions */
>>>> +static bool precise_execution; /* count every instruction */
>>>> +static int64_t start_time_ns; /* time (ns since epoch) first vCPU started */
>>>> +static int64_t virtual_time_ns; /* last set virtual time */
>>>> +
>>>> +static const void *time_handle;
>>>> +
>>>> +typedef enum {
>>>> +    UNKNOWN = 0,
>>>> +    EXECUTING,
>>>> +    IDLE,
>>>> +    FINISHED
>>>> +} vCPUState;
>>>> +
>>>> +typedef struct {
>>>> +    uint64_t counter;
>>>> +    uint64_t track_insn;
>>>> +    vCPUState state;
>>>> +    /* timestamp when vCPU entered state */
>>>> +    int64_t last_state_time;
>>>> +} vCPUTime;
>>>> +
>>>> +struct qemu_plugin_scoreboard *vcpus;
>>>> +
>>>> +/* return epoch time in ns */
>>>> +static int64_t now_ns(void)
>>>> +{
>>>> +    return g_get_real_time() * 1000;
>>>> +}
>>>> +
>>>> +static uint64_t num_insn_during(int64_t elapsed_ns)
>>>> +{
>>>> +    double num_secs = elapsed_ns / (double) NSEC_IN_ONE_SEC;
>>>> +    return num_secs * (double) insn_per_second;
>>>> +}
>>>> +
>>>> +static int64_t time_for_insn(uint64_t num_insn)
>>>> +{
>>>> +    double num_secs = (double) num_insn / (double) insn_per_second;
>>>> +    return num_secs * (double) NSEC_IN_ONE_SEC;
>>>> +}
>>>> +
>>>> +static int64_t uptime_ns(void)
>>>> +{
>>>> +    int64_t now = now_ns();
>>>> +    g_assert(now >= start_time_ns);
>>>> +    return now - start_time_ns;
>>>> +}
>>>> +
>>>> +static void vcpu_set_state(vCPUTime *vcpu, vCPUState new_state)
>>>> +{
>>>> +    vcpu->last_state_time = now_ns();
>>>> +    vcpu->state = new_state;
>>>> +}
>>>> +
>>>> +static void update_system_time(vCPUTime *vcpu)
>>>> +{
>>>> +    /* flush remaining instructions */
>>>> +    vcpu->counter += vcpu->track_insn;
>>>> +    vcpu->track_insn = 0;
>>>> +
>>>> +    int64_t uptime = uptime_ns();
>>>> +    uint64_t expected_insn = num_insn_during(uptime);
>>>> +
>>>> +    if (vcpu->counter >= expected_insn) {
>>>> +        /* this vcpu ran faster than expected, so it has to sleep */
>>>> +        uint64_t insn_advance = vcpu->counter - expected_insn;
>>>> +        uint64_t time_advance_ns = time_for_insn(insn_advance);
>>>> +        int64_t sleep_us = time_advance_ns / 1000;
>>>> +        g_usleep(sleep_us);
>>>> +    }
>>>> +
>>>> +    /* based on number of instructions, what should be the new time? */
>>>> +    int64_t new_virtual_time = time_for_insn(vcpu->counter);
>>>> +
>>>> +    g_mutex_lock(&global_state_lock);
>>>> +
>>>> +    /* Time only moves forward. Another vcpu might have updated it already. */
>>>> +    if (new_virtual_time > virtual_time_ns) {
>>>> +        qemu_plugin_update_ns(time_handle, new_virtual_time);
>>>> +        virtual_time_ns = new_virtual_time;
>>>> +    }
>>>> +
>>>> +    g_mutex_unlock(&global_state_lock);
>>>> +}
>>>> +
>>>> +static void set_start_time()
>>>> +{
>>>> +    g_mutex_lock(&global_state_lock);
>>>> +    if (!start_time_ns) {
>>>> +        start_time_ns = now_ns();
>>>> +    }
>>>> +    g_mutex_unlock(&global_state_lock);
>>>> +}
>>>> +
>>>> +static void vcpu_init(qemu_plugin_id_t id, unsigned int cpu_index)
>>>> +{
>>>> +    vCPUTime *vcpu = qemu_plugin_scoreboard_find(vcpus, cpu_index);
>>>> +    /* ensure start time is set first */
>>>> +    set_start_time();
>>>> +    /* start counter from absolute time reference */
>>>> +    vcpu->counter = num_insn_during(uptime_ns());
>>>> +    vcpu_set_state(vcpu, EXECUTING);
>>>> +}
>>>> +
>>>> +static void vcpu_idle(qemu_plugin_id_t id, unsigned int cpu_index)
>>>> +{
>>>> +    vCPUTime *vcpu = qemu_plugin_scoreboard_find(vcpus, cpu_index);
>>>> +    vcpu_set_state(vcpu, IDLE);
>>>> +}
>>>> +
>>>> +static void vcpu_resume(qemu_plugin_id_t id, unsigned int cpu_index)
>>>> +{
>>>> +    vCPUTime *vcpu = qemu_plugin_scoreboard_find(vcpus, cpu_index);
>>>> +    g_assert(vcpu->state == IDLE);
>>> I'm triggering a weird race here:
>>>     (gdb) b vcpu_init
>>>     Breakpoint 1 at 0x7ffff7fa15f7: file /home/alex/lsrc/qemu.git/contrib/plugins/ips.c, line 127.
>>>     (gdb) r
>>>     The program being debugged has been started already.
>>>     Start it from the beginning? (y or n) y
>>>     Starting program:
>>> /home/alex/lsrc/qemu.git/builds/arm.debug/qemu-system-aarch64
>>> -machine type=virt,virtualization=on,pflash0=rom,pflash1=efivars
>>> -cpu cortex-a57 -smp 32 -accel tcg -device
>>> virtio-net-pci,netdev=unet -device virtio-scsi-pci -device
>>> scsi-hd,drive=hd -netdev user,id=unet,hostfwd=tcp::2222-:22
>>> -blockdev
>>> driver=raw,node-name=hd,file.driver=host_device,file.filename=/dev/zen-ssd2/trixie-arm64,discard=unmap
>>> -serial mon:stdio -blockdev
>>> node-name=rom,driver=file,filename=/home/alex/lsrc/qemu.git/builds/arm.debug/pc-bios/edk2-aarch64-code.fd,read-only=true
>>> -blockdev
>>> node-name=efivars,driver=file,filename=/home/alex/images/qemu-arm64-efivars
>>> -m 8192 -object memory-backend-memfd,id=mem,size=8G,share=on -kernel
>>> /home/alex/lsrc/linux.git/builds/arm64/arch/arm64/boot/Image -append
>>> root=/dev/sda2\ console=ttyAMA0 -plugin
>>> contrib/plugins/libips.so,ips=1000000000
>>>     [Thread debugging using libthread_db enabled]
>>>     Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
>>>     [New Thread 0x7fffe72006c0 (LWP 360538)]
>>>     [New Thread 0x7fffe68006c0 (LWP 360540)]
>>>     [New Thread 0x7fffe5e006c0 (LWP 360541)]
>>>     [New Thread 0x7fffe54006c0 (LWP 360542)]
>>>     [New Thread 0x7fffe4a006c0 (LWP 360543)]
>>>     [New Thread 0x7fffdfe006c0 (LWP 360544)]
>>>     [New Thread 0x7fffdf4006c0 (LWP 360545)]
>>>     [New Thread 0x7fffdea006c0 (LWP 360546)]
>>>     [Switching to Thread 0x7fffdf4006c0 (LWP 360545)]
>>>     Thread 8 "qemu-system-aar" hit Breakpoint 1, vcpu_init
>>> (id=10457908569352202058, cpu_index=0) at
>>> /home/alex/lsrc/qemu.git/contrib/plugins/ips.c:127
>>>     127         vCPUTime *vcpu = qemu_plugin_scoreboard_find(vcpus, cpu_index);
>>>     (gdb) c
>>>     Continuing.
>>>     [New Thread 0x7fffde0006c0 (LWP 360548)]
>>>     [Switching to Thread 0x7fffdea006c0 (LWP 360546)]
>>>     Thread 9 "qemu-system-aar" hit Breakpoint 1, vcpu_init
>>> (id=10457908569352202058, cpu_index=1) at
>>> /home/alex/lsrc/qemu.git/contrib/plugins/ips.c:127
>>>     127         vCPUTime *vcpu = qemu_plugin_scoreboard_find(vcpus, cpu_index);
>>>     (gdb)
>>>     Continuing.
>>>     [New Thread 0x7fffdd6006c0 (LWP 360549)]
>>>     [Switching to Thread 0x7fffde0006c0 (LWP 360548)]
>>>     Thread 10 "qemu-system-aar" hit Breakpoint 1, vcpu_init
>>> (id=10457908569352202058, cpu_index=2) at
>>> /home/alex/lsrc/qemu.git/contrib/plugins/ips.c:127
>>>     127         vCPUTime *vcpu = qemu_plugin_scoreboard_find(vcpus, cpu_index);
>>>     (gdb)
>>>     Continuing.
>>>     [New Thread 0x7fffdcc006c0 (LWP 360550)]
>>>     [Switching to Thread 0x7fffdd6006c0 (LWP 360549)]
>>>     Thread 11 "qemu-system-aar" hit Breakpoint 1, vcpu_init
>>> (id=10457908569352202058, cpu_index=3) at
>>> /home/alex/lsrc/qemu.git/contrib/plugins/ips.c:127
>>>     127         vCPUTime *vcpu = qemu_plugin_scoreboard_find(vcpus, cpu_index);
>>>     (gdb)
>>>     Continuing.
>>>     [New Thread 0x7fffd3e006c0 (LWP 360551)]
>>>     [Switching to Thread 0x7fffdcc006c0 (LWP 360550)]
>>>     Thread 12 "qemu-system-aar" hit Breakpoint 1, vcpu_init
>>> (id=10457908569352202058, cpu_index=4) at
>>> /home/alex/lsrc/qemu.git/contrib/plugins/ips.c:127
>>>     127         vCPUTime *vcpu = qemu_plugin_scoreboard_find(vcpus, cpu_index);
>>>     (gdb) n
>>>     129         set_start_time();
>>>     (gdb)
>>>     131         vcpu->counter = num_insn_during(uptime_ns());
>>>     (gdb)
>>>     132         vcpu_set_state(vcpu, EXECUTING);
>>>     (gdb)
>>>     133     }
>>>     (gdb) p vcpu->state
>>>     $1 = EXECUTING
>>>     (gdb) p &vcpu->state
>>>     $2 = (vCPUState *) 0x555557c6b5d0
>>>     (gdb) watch *(vCPUState *) 0x555557c6b5d0
>>>     Hardware watchpoint 2: *(vCPUState *) 0x555557c6b5d0
>>>     (gdb) c
>>>     Continuing.
>>>     [Thread 0x7fffdfe006c0 (LWP 360544) exited]
>>>     [Thread 0x7fffe5e006c0 (LWP 360541) exited]
>>>     Thread 12 "qemu-system-aar" hit Hardware watchpoint 2:
>>> *(vCPUState *) 0x555557c6b5d0
>>>     Old value = EXECUTING
>>>     New value = IDLE
>>>     vcpu_set_state (vcpu=0x555557c6b5c0, new_state=IDLE) at /home/alex/lsrc/qemu.git/contrib/plugins/ips.c:83
>>>     83      }
>>>     (gdb) c
>>>     Continuing.
>>>     [New Thread 0x7fffdfe006c0 (LWP 360591)]
>>>     [New Thread 0x7fffe5e006c0 (LWP 360592)]
>>>     [New Thread 0x7fffd34006c0 (LWP 360593)]
>>>     [Switching to Thread 0x7fffdfe006c0 (LWP 360591)]
>>>     Thread 14 "qemu-system-aar" hit Breakpoint 1, vcpu_init
>>> (id=10457908569352202058, cpu_index=6) at
>>> /home/alex/lsrc/qemu.git/contrib/plugins/ips.c:127
>>>     127         vCPUTime *vcpu = qemu_plugin_scoreboard_find(vcpus, cpu_index);
>>>     (gdb)
>>>     Continuing.
>>>     [New Thread 0x7fffd2a006c0 (LWP 360594)]
>>>     **
>>>     ERROR:/home/alex/lsrc/qemu.git/contrib/plugins/ips.c:144:vcpu_resume: assertion failed: (vcpu->state == IDLE)
>>>     Bail out! ERROR:/home/alex/lsrc/qemu.git/contrib/plugins/ips.c:144:vcpu_resume: assertion failed: (vcpu->state == IDLE)
>>>     Thread 13 "qemu-system-aar" received signal SIGABRT, Aborted.
>>>     [Switching to Thread 0x7fffd3e006c0 (LWP 360551)]
>>>     __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at ./nptl/pthread_kill.c:44
>>>     44      ./nptl/pthread_kill.c: No such file or directory.
>>>     (gdb) bt
>>>     #0  __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at ./nptl/pthread_kill.c:44
>>>     #1  0x00007ffff4ca9e8f in __pthread_kill_internal (signo=6, threadid=<optimized out>) at ./nptl/pthread_kill.c:78
>>>     #2  0x00007ffff4c5afb2 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/raise.c:26
>>>     #3  0x00007ffff4c45472 in __GI_abort () at ./stdlib/abort.c:79
>>>     #4  0x00007ffff6e46ec8 in  () at /lib/x86_64-linux-gnu/libglib-2.0.so.0
>>>     #5  0x00007ffff6ea6e1a in g_assertion_message_expr () at /lib/x86_64-linux-gnu/libglib-2.0.so.0
>>>     #6  0x00007ffff7fa16e2 in vcpu_resume (id=10457908569352202058, cpu_index=5) at /home/alex/lsrc/qemu.git/contrib/plugins/ips.c:144
>>>     #7  0x00005555562c3202 in plugin_vcpu_cb__simple (cpu=0x5555583d9540, ev=QEMU_PLUGIN_EV_VCPU_RESUME) at ../../plugins/core.c:111
>>>     #8  0x00005555562c43f7 in qemu_plugin_vcpu_resume_cb (cpu=0x5555583d9540) at ../../plugins/core.c:523
>>>     #9  0x0000555555d9150e in qemu_wait_io_event (cpu=0x5555583d9540) at ../../system/cpus.c:465
>>>     #10 0x00005555562c67d0 in mttcg_cpu_thread_fn (arg=0x5555583d9540) at ../../accel/tcg/tcg-accel-ops-mttcg.c:118
>>>     #11 0x00005555565120ff in qemu_thread_start (args=0x5555584716e0) at ../../util/qemu-thread-posix.c:541
>>>     #12 0x00007ffff4ca8134 in start_thread (arg=<optimized out>) at ./nptl/pthread_create.c:442
>>>     #13 0x00007ffff4d287dc in clone3 () at ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81
>>>     (gdb)
>>> But I don't understand how we can ever hit the idle callback without
>>> first hitting the init callback.
>>>
>>
>> More exactly, the assert we hit means that the idle callback, was not
>> called before the resume callback.
>> Any chance you can check what is the current vcpu->state value? I
>> wonder if it's not an exited cpu, that gets resumed after.
> 
> No when I looked at it it was set as UNKNOWN. Unfortunately it doesn't
> trigger if I stick breakpoints in or run under rr.
>

By using rr record --chaos mode maybe?

>>
>> Thanks,
>> Pierrick
>>
>>>> +    int64_t idle_time = now_ns() - vcpu->last_state_time;
>>>> +    /* accumulate expected number of instructions */
>>>> +    vcpu->counter += num_insn_during(idle_time);
>>>> +    vcpu_set_state(vcpu, EXECUTING);
>>>> +}
>>>> +
>>>> +static void vcpu_exit(qemu_plugin_id_t id, unsigned int cpu_index)
>>>> +{
>>>> +    vCPUTime *vcpu = qemu_plugin_scoreboard_find(vcpus, cpu_index);
>>>> +    vcpu_set_state(vcpu, FINISHED);
>>>> +    update_system_time(vcpu);
>>>> +    vcpu->counter = 0;
>>>> +}
>>>> +
>>>> +static void every_insn_quantum(unsigned int cpu_index, void *udata)
>>>> +{
>>>> +    vCPUTime *vcpu = qemu_plugin_scoreboard_find(vcpus, cpu_index);
>>>> +    g_assert(vcpu->track_insn >= insn_quantum);
>>>> +    update_system_time(vcpu);
>>>> +}
>>>> +
>>>> +static void vcpu_tb_trans(qemu_plugin_id_t id, struct qemu_plugin_tb *tb)
>>>> +{
>>>> +    size_t n_insns = qemu_plugin_tb_n_insns(tb);
>>>> +    qemu_plugin_u64 track_insn =
>>>> +        qemu_plugin_scoreboard_u64_in_struct(vcpus, vCPUTime, track_insn);
>>>> +    if (precise_execution) {
>>>> +        /* count (and eventually trap) on every instruction */
>>>> +        for (int idx = 0; idx < qemu_plugin_tb_n_insns(tb); ++idx) {
>>>> +            struct qemu_plugin_insn *insn = qemu_plugin_tb_get_insn(tb, idx);
>>>> +            qemu_plugin_register_vcpu_insn_exec_inline_per_vcpu(
>>>> +                insn, QEMU_PLUGIN_INLINE_ADD_U64, track_insn, 1);
>>>> +            qemu_plugin_register_vcpu_insn_exec_cond_cb(
>>>> +                insn, every_insn_quantum,
>>>> +                QEMU_PLUGIN_CB_NO_REGS, QEMU_PLUGIN_COND_GE,
>>>> +                track_insn, insn_quantum, NULL);
>>>> +        }
>>>> +    } else {
>>>> +        /* count (and eventually trap) once per tb */
>>>> +        qemu_plugin_register_vcpu_tb_exec_inline_per_vcpu(
>>>> +            tb, QEMU_PLUGIN_INLINE_ADD_U64, track_insn, n_insns);
>>>> +        qemu_plugin_register_vcpu_tb_exec_cond_cb(
>>>> +            tb, every_insn_quantum,
>>>> +            QEMU_PLUGIN_CB_NO_REGS, QEMU_PLUGIN_COND_GE,
>>>> +            track_insn, insn_quantum, NULL);
>>>> +    }
>>>> +}
>>>> +
>>>> +static void plugin_exit(qemu_plugin_id_t id, void *udata)
>>>> +{
>>>> +    qemu_plugin_scoreboard_free(vcpus);
>>>> +}
>>>> +
>>>> +QEMU_PLUGIN_EXPORT int qemu_plugin_install(qemu_plugin_id_t id,
>>>> +                                           const qemu_info_t *info, int argc,
>>>> +                                           char **argv)
>>>> +{
>>>> +    for (int i = 0; i < argc; i++) {
>>>> +        char *opt = argv[i];
>>>> +        g_auto(GStrv) tokens = g_strsplit(opt, "=", 2);
>>>> +        if (g_strcmp0(tokens[0], "ips") == 0) {
>>>> +            insn_per_second = g_ascii_strtoull(tokens[1], NULL, 10);
>>>> +            if (!insn_per_second && errno) {
>>>> +                fprintf(stderr, "%s: couldn't parse %s (%s)\n",
>>>> +                        __func__, tokens[1], g_strerror(errno));
>>>> +                return -1;
>>>> +            }
>>>> +
>>>> +        } else if (g_strcmp0(tokens[0], "precise") == 0) {
>>>> +            if (!qemu_plugin_bool_parse(tokens[0], tokens[1],
>>>> +                                        &precise_execution)) {
>>>> +                fprintf(stderr, "boolean argument parsing failed: %s\n", opt);
>>>> +                return -1;
>>>> +            }
>>>> +        } else {
>>>> +            fprintf(stderr, "option parsing failed: %s\n", opt);
>>>> +            return -1;
>>>> +        }
>>>> +    }
>>>> +
>>>> +    vcpus = qemu_plugin_scoreboard_new(sizeof(vCPUTime));
>>>> +    insn_quantum = insn_per_second / NUM_TIME_UPDATE_PER_SEC;
>>>> +
>>>> +    time_handle = qemu_plugin_request_time_control();
>>>> +    g_assert(time_handle);
>>>> +
>>>> +    qemu_plugin_register_vcpu_tb_trans_cb(id, vcpu_tb_trans);
>>>> +    qemu_plugin_register_vcpu_init_cb(id, vcpu_init);
>>>> +    qemu_plugin_register_vcpu_idle_cb(id, vcpu_idle);
>>>> +    qemu_plugin_register_vcpu_resume_cb(id, vcpu_resume);
>>>> +    qemu_plugin_register_vcpu_exit_cb(id, vcpu_exit);
>>>> +    qemu_plugin_register_atexit_cb(id, plugin_exit, NULL);
>>>> +
>>>> +    return 0;
>>>> +}
>>>> diff --git a/contrib/plugins/Makefile b/contrib/plugins/Makefile
>>>> index 0b64d2c1e3a..449ead11305 100644
>>>> --- a/contrib/plugins/Makefile
>>>> +++ b/contrib/plugins/Makefile
>>>> @@ -27,6 +27,7 @@ endif
>>>>    NAMES += hwprofile
>>>>    NAMES += cache
>>>>    NAMES += drcov
>>>> +NAMES += ips
>>>>      ifeq ($(CONFIG_WIN32),y)
>>>>    SO_SUFFIX := .dll
>>>
>