* build qemu on Monterey?
@ 2021-12-18 14:38 Ani Sinha
2021-12-20 7:26 ` Thomas Huth
0 siblings, 1 reply; 4+ messages in thread
From: Ani Sinha @ 2021-12-18 14:38 UTC (permalink / raw)
To: qemu-devel
Hi :
Has anyone tried this? Yes, I know about
https://wiki.qemu.org/Hosts/Mac
but I am getting
$ ./configure --target-list=x86_64-softmmu
Using './build' as the directory for build output
Disabling PIE due to missing toolchain support
ERROR: glib-2.56 gthread-2.0 is required to compile QEMU
when glib is already installed using brew.
Any ideas?
thanks,
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: build qemu on Monterey?
2021-12-18 14:38 build qemu on Monterey? Ani Sinha
@ 2021-12-20 7:26 ` Thomas Huth
2021-12-20 11:38 ` Ani Sinha
2021-12-20 13:50 ` Ani Sinha
0 siblings, 2 replies; 4+ messages in thread
From: Thomas Huth @ 2021-12-20 7:26 UTC (permalink / raw)
To: Ani Sinha, qemu-devel; +Cc: qemu-arm
On 18/12/2021 15.38, Ani Sinha wrote:
> Hi :
> Has anyone tried this? Yes, I know about
> https://wiki.qemu.org/Hosts/Mac
>
> but I am getting
>
> $ ./configure --target-list=x86_64-softmmu
> Using './build' as the directory for build output
> Disabling PIE due to missing toolchain support
>
> ERROR: glib-2.56 gthread-2.0 is required to compile QEMU
>
> when glib is already installed using brew.
>
> Any ideas?
1) Check "config.log" to see the exact reason for the failure
2) Check .gitlab-ci.d/cirrus/macos-11.vars to install the same packages on
your system, maybe that helps...?
HTH,
Thomas
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: build qemu on Monterey?
2021-12-20 7:26 ` Thomas Huth
@ 2021-12-20 11:38 ` Ani Sinha
2021-12-20 13:50 ` Ani Sinha
1 sibling, 0 replies; 4+ messages in thread
From: Ani Sinha @ 2021-12-20 11:38 UTC (permalink / raw)
To: Thomas Huth; +Cc: qemu-arm, qemu-devel
On Mon, Dec 20, 2021 at 12:56 PM Thomas Huth <thuth@redhat.com> wrote:
>
> On 18/12/2021 15.38, Ani Sinha wrote:
> > Hi :
> > Has anyone tried this? Yes, I know about
> > https://wiki.qemu.org/Hosts/Mac
> >
> > but I am getting
> >
> > $ ./configure --target-list=x86_64-softmmu
> > Using './build' as the directory for build output
> > Disabling PIE due to missing toolchain support
> >
> > ERROR: glib-2.56 gthread-2.0 is required to compile QEMU
> >
> > when glib is already installed using brew.
> >
> > Any ideas?
>
> 1) Check "config.log" to see the exact reason for the failure
This is what I see :
funcs: do_compiler do_cc compile_prog main
lines: 145 183 1768 0
cc -m64 -mcx16 -std=gnu11 -Wall -DOS_OBJECT_USE_OBJC=0 -D_GNU_SOURCE
-D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes
-Wredundant-decls -Wundef -Wwrite-strings -Wmissing-prototypes
-fno-strict-aliasing -fno-common -fwrapv -Wold-style-definition
-Wtype-limits -Wformat-security -Wformat-y2k -Winit-self
-Wignored-qualifiers -Wempty-body -Wnested-externs -Wendif-labels
-Wexpansion-to-defined -Wno-initializer-overrides
-Wno-missing-include-dirs -Wno-shift-negative-value
-Wno-string-plus-int -Wno-typedef-redefinition
-Wno-tautological-type-limit-compare -Wno-psabi
-fstack-protector-strong -o config-temp/qemu-conf.exe
config-temp/qemu-conf.c -fstack-protector-strong -Wl,-z,relro
-Wl,-z,now
ld: unknown option: -z
clang: error: linker command failed with exit code 1 (use -v to see invocation)
funcs: do_compiler do_cc compile_prog main
lines: 145 183 1860 0
cc -m64 -mcx16 -std=gnu11 -Wall -DOS_OBJECT_USE_OBJC=0 -D_GNU_SOURCE
-D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes
-Wredundant-decls -Wundef -Wwrite-strings -Wmissing-prototypes
-fno-strict-aliasing -fno-common -fwrapv -Wold-style-definition
-Wtype-limits -Wformat-security -Wformat-y2k -Winit-self
-Wignored-qualifiers -Wempty-body -Wnested-externs -Wendif-labels
-Wexpansion-to-defined -Wno-initializer-overrides
-Wno-missing-include-dirs -Wno-shift-negative-value
-Wno-string-plus-int -Wno-typedef-redefinition
-Wno-tautological-type-limit-compare -Wno-psabi
-fstack-protector-strong -o config-temp/qemu-conf.exe
config-temp/qemu-conf.c -fstack-protector-strong
funcs: do_compiler do_cc compile_prog main
lines: 145 183 1979 0
cc -m64 -mcx16 -std=gnu11 -Wall -DOS_OBJECT_USE_OBJC=0 -D_GNU_SOURCE
-D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes
-Wredundant-decls -Wundef -Wwrite-strings -Wmissing-prototypes
-fno-strict-aliasing -fno-common -fwrapv -Wold-style-definition
-Wtype-limits -Wformat-security -Wformat-y2k -Winit-self
-Wignored-qualifiers -Wempty-body -Wnested-externs -Wendif-labels
-Wexpansion-to-defined -Wno-initializer-overrides
-Wno-missing-include-dirs -Wno-shift-negative-value
-Wno-string-plus-int -Wno-typedef-redefinition
-Wno-tautological-type-limit-compare -Wno-psabi
-fstack-protector-strong -o config-temp/qemu-conf.exe
config-temp/qemu-conf.c -fstack-protector-strong -lxenstore -lxenctrl
config-temp/qemu-conf.c:1:10: fatal error: 'xenctrl.h' file not found
#include <xenctrl.h>
^~~~~~~~~~~
1 error generated.
funcs: do_compiler do_cc compile_prog main
lines: 145 183 2257 0
cc -m64 -mcx16 -std=gnu11 -Wall -DOS_OBJECT_USE_OBJC=0 -D_GNU_SOURCE
-D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes
-Wredundant-decls -Wundef -Wwrite-strings -Wmissing-prototypes
-fno-strict-aliasing -fno-common -fwrapv -Wold-style-definition
-Wtype-limits -Wformat-security -Wformat-y2k -Winit-self
-Wignored-qualifiers -Wempty-body -Wnested-externs -Wendif-labels
-Wexpansion-to-defined -Wno-initializer-overrides
-Wno-missing-include-dirs -Wno-shift-negative-value
-Wno-string-plus-int -Wno-typedef-redefinition
-Wno-tautological-type-limit-compare -Wno-psabi
-fstack-protector-strong -o config-temp/qemu-conf.exe
config-temp/qemu-conf.c -fstack-protector-strong -lrdmacm -libverbs
-libumad
config-temp/qemu-conf.c:1:10: fatal error: 'rdma/rdma_cma.h' file not found
#include <rdma/rdma_cma.h>
^~~~~~~~~~~~~~~~~
1 error generated.
funcs: do_compiler do_cc compile_prog main
lines: 145 183 2355 0
cc -m64 -mcx16 -std=gnu11 -Wall -DOS_OBJECT_USE_OBJC=0 -D_GNU_SOURCE
-D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes
-Wredundant-decls -Wundef -Wwrite-strings -Wmissing-prototypes
-fno-strict-aliasing -fno-common -fwrapv -Wold-style-definition
-Wtype-limits -Wformat-security -Wformat-y2k -Winit-self
-Wignored-qualifiers -Wempty-body -Wnested-externs -Wendif-labels
-Wexpansion-to-defined -Wno-initializer-overrides
-Wno-missing-include-dirs -Wno-shift-negative-value
-Wno-string-plus-int -Wno-typedef-redefinition
-Wno-tautological-type-limit-compare -Wno-psabi
-fstack-protector-strong -o config-temp/qemu-conf.exe
config-temp/qemu-conf.c -fstack-protector-strong
config-temp/qemu-conf.c:2:10: fatal error: 'xfs/xfs.h' file not found
#include <xfs/xfs.h>
^~~~~~~~~~~
1 error generated.
funcs: do_compiler do_cc compile_prog main
lines: 145 183 2396 0
cc -m64 -mcx16 -std=gnu11 -Wall -DOS_OBJECT_USE_OBJC=0 -D_GNU_SOURCE
-D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes
-Wredundant-decls -Wundef -Wwrite-strings -Wmissing-prototypes
-fno-strict-aliasing -fno-common -fwrapv -Wold-style-definition
-Wtype-limits -Wformat-security -Wformat-y2k -Winit-self
-Wignored-qualifiers -Wempty-body -Wnested-externs -Wendif-labels
-Wexpansion-to-defined -Wno-initializer-overrides
-Wno-missing-include-dirs -Wno-shift-negative-value
-Wno-string-plus-int -Wno-typedef-redefinition
-Wno-tautological-type-limit-compare -Wno-psabi
-fstack-protector-strong -o config-temp/qemu-conf.exe
config-temp/qemu-conf.c -fstack-protector-strong
-Wl,--dynamic-list=config-temp/qemu-conf.txt
ld: unknown option: --dynamic-list=config-temp/qemu-conf.txt
clang: error: linker command failed with exit code 1 (use -v to see invocation)
funcs: do_compiler do_cc compile_prog main
lines: 145 183 2408 0
cc -m64 -mcx16 -std=gnu11 -Wall -DOS_OBJECT_USE_OBJC=0 -D_GNU_SOURCE
-D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes
-Wredundant-decls -Wundef -Wwrite-strings -Wmissing-prototypes
-fno-strict-aliasing -fno-common -fwrapv -Wold-style-definition
-Wtype-limits -Wformat-security -Wformat-y2k -Winit-self
-Wignored-qualifiers -Wempty-body -Wnested-externs -Wendif-labels
-Wexpansion-to-defined -Wno-initializer-overrides
-Wno-missing-include-dirs -Wno-shift-negative-value
-Wno-string-plus-int -Wno-typedef-redefinition
-Wno-tautological-type-limit-compare -Wno-psabi
-fstack-protector-strong -o config-temp/qemu-conf.exe
config-temp/qemu-conf.c -fstack-protector-strong
-Wl,-exported_symbols_list,config-temp/qemu-conf.txt
>
> 2) Check .gitlab-ci.d/cirrus/macos-11.vars to install the same packages on
> your system, maybe that helps...?
This did not help :(
>
> HTH,
> Thomas
>
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: build qemu on Monterey?
2021-12-20 7:26 ` Thomas Huth
2021-12-20 11:38 ` Ani Sinha
@ 2021-12-20 13:50 ` Ani Sinha
1 sibling, 0 replies; 4+ messages in thread
From: Ani Sinha @ 2021-12-20 13:50 UTC (permalink / raw)
To: Thomas Huth; +Cc: qemu-arm, qemu-devel
On Mon, 20 Dec 2021, Thomas Huth wrote:
> On 18/12/2021 15.38, Ani Sinha wrote:
> > Hi :
> > Has anyone tried this? Yes, I know about
> > https://wiki.qemu.org/Hosts/Mac
> >
> > but I am getting
> >
> > $ ./configure --target-list=x86_64-softmmu
> > Using './build' as the directory for build output
> > Disabling PIE due to missing toolchain support
> >
> > ERROR: glib-2.56 gthread-2.0 is required to compile QEMU
> >
> > when glib is already installed using brew.
> >
> > Any ideas?
>
> 1) Check "config.log" to see the exact reason for the failure
>
> 2) Check .gitlab-ci.d/cirrus/macos-11.vars to install the same packages on
> your system, maybe that helps...?
I ended up using a ubuntu docker to build qemu on my mac.
>
> HTH,
> Thomas
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-12-20 18:35 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-12-18 14:38 build qemu on Monterey? Ani Sinha
2021-12-20 7:26 ` Thomas Huth
2021-12-20 11:38 ` Ani Sinha
2021-12-20 13:50 ` Ani Sinha
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).