From: Yonit Halperin <yhalperi@redhat.com>
To: Alon Levy <alevy@redhat.com>
Cc: qemu-devel@nongnu.org, kraxel@redhat.com
Subject: Re: [Qemu-devel] [PATCH v2] qxl: add QXL_IO_MONITORS_CONFIG_ASYNC
Date: Thu, 26 Jul 2012 08:26:40 +0300 [thread overview]
Message-ID: <5010D510.4090301@redhat.com> (raw)
In-Reply-To: <20120725172410.GC29361@garlic.redhat.com>
Hi,
On 07/25/2012 08:29 PM, Alon Levy wrote:
> On Wed, Jul 25, 2012 at 12:00:21PM +0300, Yonit Halperin wrote:
>> Hi,
>> I think you should save the monitor configuration as part of the vmstate,
>> and recall spice_qxl_monitors_config_async in qxl_post_load.
>
> Good point, will do. Would be nice if I could differentiate same client
> (that doesn't need the recalling) and new client.
>
The client doesn't need the recalling (if it the same client that was
connected to the src); It is the destination server which needs the
recalling, for the future clients that will get connected.
Cheers,
Yonit.
>>
>> Regards,
>> Yonit.
>>
>> On 07/23/2012 07:33 PM, Alon Levy wrote:
>>> bumps spice-protocol to 0.12.0 for new IO.
>>> revision bumped to 4 for new IO support, enabled for spice-server>= 0.11.1
>>>
>>> RHBZ: 770842
>>>
>>> Signed-off-by: Alon Levy<alevy@redhat.com>
>>> ---
>>> v2: fixed interface_async_complete_io to not complain about unexpected async io.
>>>
>>> configure | 2 +-
>>> hw/qxl.c | 30 +++++++++++++++++++++++++++++-
>>> hw/qxl.h | 4 ++++
>>> trace-events | 1 +
>>> 4 files changed, 35 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/configure b/configure
>>> index cef0a71..5fcd315 100755
>>> --- a/configure
>>> +++ b/configure
>>> @@ -2630,7 +2630,7 @@ EOF
>>> spice_cflags=$($pkg_config --cflags spice-protocol spice-server 2>/dev/null)
>>> spice_libs=$($pkg_config --libs spice-protocol spice-server 2>/dev/null)
>>> if $pkg_config --atleast-version=0.8.2 spice-server>/dev/null 2>&1&& \
>>> - $pkg_config --atleast-version=0.8.1 spice-protocol> /dev/null 2>&1&& \
>>> + $pkg_config --atleast-version=0.12.0 spice-protocol> /dev/null 2>&1&& \
>>> compile_prog "$spice_cflags" "$spice_libs" ; then
>>> spice="yes"
>>> libs_softmmu="$libs_softmmu $spice_libs"
>>> diff --git a/hw/qxl.c b/hw/qxl.c
>>> index 3a883ce..0440440 100644
>>> --- a/hw/qxl.c
>>> +++ b/hw/qxl.c
>>> @@ -249,6 +249,18 @@ static void qxl_spice_destroy_surfaces(PCIQXLDevice *qxl, qxl_async_io async)
>>> }
>>> }
>>>
>>> +#if SPICE_SERVER_VERSION>= 0x000b01 /* 0.11.1 */
>>> +static void qxl_spice_monitors_config_async(PCIQXLDevice *qxl)
>>> +{
>>> + trace_qxl_spice_monitors_config(qxl->id);
>>> + spice_qxl_monitors_config_async(&qxl->ssd.qxl,
>>> + qxl->ram->monitors_config,
>>> + MEMSLOT_GROUP_GUEST,
>>> + (uintptr_t)qxl_cookie_new(QXL_COOKIE_TYPE_IO,
>>> + QXL_IO_MONITORS_CONFIG_ASYNC));
>>> +}
>>> +#endif
>>> +
>>> void qxl_spice_reset_image_cache(PCIQXLDevice *qxl)
>>> {
>>> trace_qxl_spice_reset_image_cache(qxl->id);
>>> @@ -538,6 +550,7 @@ static const char *io_port_to_string(uint32_t io_port)
>>> = "QXL_IO_DESTROY_ALL_SURFACES_ASYNC",
>>> [QXL_IO_FLUSH_SURFACES_ASYNC] = "QXL_IO_FLUSH_SURFACES_ASYNC",
>>> [QXL_IO_FLUSH_RELEASE] = "QXL_IO_FLUSH_RELEASE",
>>> + [QXL_IO_MONITORS_CONFIG_ASYNC] = "QXL_IO_MONITORS_CONFIG_ASYNC",
>>> };
>>> return io_port_to_string[io_port];
>>> }
>>> @@ -819,6 +832,7 @@ static void interface_async_complete_io(PCIQXLDevice *qxl, QXLCookie *cookie)
>>> case QXL_IO_DESTROY_PRIMARY_ASYNC:
>>> case QXL_IO_UPDATE_AREA_ASYNC:
>>> case QXL_IO_FLUSH_SURFACES_ASYNC:
>>> + case QXL_IO_MONITORS_CONFIG_ASYNC:
>>> break;
>>> case QXL_IO_CREATE_PRIMARY_ASYNC:
>>> qxl_create_guest_primary_complete(qxl);
>>> @@ -1333,7 +1347,7 @@ static void ioport_write(void *opaque, target_phys_addr_t addr,
>>> io_port, io_port_to_string(io_port));
>>> /* be nice to buggy guest drivers */
>>> if (io_port>= QXL_IO_UPDATE_AREA_ASYNC&&
>>> - io_port<= QXL_IO_DESTROY_ALL_SURFACES_ASYNC) {
>>> + io_port<= QXL_IO_MONITORS_CONFIG_ASYNC) {
>>> qxl_send_events(d, QXL_INTERRUPT_IO_CMD);
>>> }
>>> return;
>>> @@ -1361,6 +1375,9 @@ static void ioport_write(void *opaque, target_phys_addr_t addr,
>>> io_port = QXL_IO_DESTROY_ALL_SURFACES;
>>> goto async_common;
>>> case QXL_IO_FLUSH_SURFACES_ASYNC:
>>> +#if SPICE_SERVER_VERSION>= 0x000b01 /* 0.11.1 */
>>> + case QXL_IO_MONITORS_CONFIG_ASYNC:
>>> +#endif
>>> async_common:
>>> async = QXL_ASYNC;
>>> qemu_mutex_lock(&d->async_lock);
>>> @@ -1490,6 +1507,11 @@ async_common:
>>> d->mode = QXL_MODE_UNDEFINED;
>>> qxl_spice_destroy_surfaces(d, async);
>>> break;
>>> +#if SPICE_SERVER_VERSION>= 0x000b01 /* 0.11.1 */
>>> + case QXL_IO_MONITORS_CONFIG_ASYNC:
>>> + qxl_spice_monitors_config_async(d);
>>> + break;
>>> +#endif
>>> default:
>>> qxl_set_guest_bug(d, "%s: unexpected ioport=0x%x\n", __func__, io_port);
>>> }
>>> @@ -1785,9 +1807,15 @@ static int qxl_init_common(PCIQXLDevice *qxl)
>>> io_size = 16;
>>> break;
>>> case 3: /* qxl-3 */
>>> + pci_device_rev = QXL_REVISION_STABLE_V10;
>>> + io_size = 32; /* PCI region size must be pow2 */
>>> + break;
>>> +#if SPICE_SERVER_VERSION>= 0x000b01 /* 0.11.1 */
>>> + case 4: /* qxl-4 */
>>> pci_device_rev = QXL_DEFAULT_REVISION;
>>> io_size = msb_mask(QXL_IO_RANGE_SIZE * 2 - 1);
>>> break;
>>> +#endif
>>> default:
>>> error_report("Invalid revision %d for qxl device (max %d)",
>>> qxl->revision, QXL_DEFAULT_REVISION);
>>> diff --git a/hw/qxl.h b/hw/qxl.h
>>> index 172baf6..c1aadaa 100644
>>> --- a/hw/qxl.h
>>> +++ b/hw/qxl.h
>>> @@ -128,7 +128,11 @@ typedef struct PCIQXLDevice {
>>> } \
>>> } while (0)
>>>
>>> +#if SPICE_SERVER_VERSION>= 0x000b01 /* 0.11.1 */
>>> +#define QXL_DEFAULT_REVISION QXL_REVISION_STABLE_V12
>>> +#else
>>> #define QXL_DEFAULT_REVISION QXL_REVISION_STABLE_V10
>>> +#endif
>>>
>>> /* qxl.c */
>>> void *qxl_phys2virt(PCIQXLDevice *qxl, QXLPHYSICAL phys, int group_id);
>>> diff --git a/trace-events b/trace-events
>>> index 2a5f074..3db04ad 100644
>>> --- a/trace-events
>>> +++ b/trace-events
>>> @@ -954,6 +954,7 @@ qxl_spice_destroy_surfaces(int qid, int async) "%d async=%d"
>>> qxl_spice_destroy_surface_wait_complete(int qid, uint32_t id) "%d sid=%d"
>>> qxl_spice_destroy_surface_wait(int qid, uint32_t id, int async) "%d sid=%d async=%d"
>>> qxl_spice_flush_surfaces_async(int qid, uint32_t surface_count, uint32_t num_free_res) "%d s#=%d, res#=%d"
>>> +qxl_spice_monitors_config(int id) "%d"
>>> qxl_spice_loadvm_commands(int qid, void *ext, uint32_t count) "%d ext=%p count=%d"
>>> qxl_spice_oom(int qid) "%d"
>>> qxl_spice_reset_cursor(int qid) "%d"
>>
next prev parent reply other threads:[~2012-07-26 5:25 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-23 13:08 [Qemu-devel] [PATCH 1/2] qxl: disallow unknown revisions Alon Levy
2012-07-23 13:08 ` [Qemu-devel] [PATCH 2/2] qxl: add QXL_IO_MONITORS_CONFIG_ASYNC Alon Levy
2012-07-23 16:33 ` [Qemu-devel] [PATCH v2] " Alon Levy
2012-07-25 9:00 ` Yonit Halperin
2012-07-25 17:29 ` Alon Levy
2012-07-26 5:26 ` Yonit Halperin [this message]
2012-07-28 8:56 ` Alon Levy
2012-07-28 9:01 ` Blue Swirl
2012-07-28 10:20 ` Alon Levy
2012-07-28 10:23 ` [Qemu-devel] [PATCH v3] " Alon Levy
2012-08-06 7:31 ` Gerd Hoffmann
2012-08-09 13:41 ` Alon Levy
2012-08-09 13:50 ` Gerd Hoffmann
2012-08-09 14:18 ` Alon Levy
2012-08-09 14:21 ` [Qemu-devel] [PATCH v4 1/2] " Alon Levy
2012-08-09 14:21 ` [Qemu-devel] [PATCH v4 2/2] configure: print spice-protocol and spice-server versions Alon Levy
2012-08-15 8:23 ` [Qemu-devel] [PATCH v4 1/2] qxl: add QXL_IO_MONITORS_CONFIG_ASYNC Gerd Hoffmann
2012-08-15 10:32 ` Alon Levy
2012-08-15 10:43 ` Gerd Hoffmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5010D510.4090301@redhat.com \
--to=yhalperi@redhat.com \
--cc=alevy@redhat.com \
--cc=kraxel@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).