[Qemu-devel] [PATCH] megasas: Update function megasys_scsi_uninit

[Qemu-devel] [PATCH] megasas: Update function megasys_scsi_uninit

[Stefan Weil]

Commit f90c2bcdbc69e41e575f868b984c3e2de8f51bac changed
PCIUnregisterFunc, therefore the function prototype
needs an update.

megasas.o is currently not linked, so this bug was not
detected by the buildbots.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
---
 hw/megasas.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/hw/megasas.c b/hw/megasas.c
index 833f313..5235c50 100644
--- a/hw/megasas.c
+++ b/hw/megasas.c
@@ -2041,7 +2041,7 @@ static const VMStateDescription vmstate_megasas = {
     }
 };
 
-static int megasas_scsi_uninit(PCIDevice *d)
+static void megasas_scsi_uninit(PCIDevice *d)
 {
     MegasasState *s = DO_UPCAST(MegasasState, dev, d);
 
@@ -2051,7 +2051,6 @@ static int megasas_scsi_uninit(PCIDevice *d)
     memory_region_destroy(&s->mmio_io);
     memory_region_destroy(&s->port_io);
     memory_region_destroy(&s->queue_io);
-    return 0;
 }
 
 static const struct SCSIBusInfo megasas_scsi_info = {
-- 
1.7.10

Re: [Qemu-devel] [PATCH] megasas: Update function megasys_scsi_uninit

[Paolo Bonzini]

Il 31/07/2012 07:54, Stefan Weil ha scritto:
> Commit f90c2bcdbc69e41e575f868b984c3e2de8f51bac changed
> PCIUnregisterFunc, therefore the function prototype
> needs an update.
> 
> megasas.o is currently not linked, so this bug was not
> detected by the buildbots.
> 
> Signed-off-by: Stefan Weil <sw@weilnetz.de>
> ---
>  hw/megasas.c |    3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/hw/megasas.c b/hw/megasas.c
> index 833f313..5235c50 100644
> --- a/hw/megasas.c
> +++ b/hw/megasas.c
> @@ -2041,7 +2041,7 @@ static const VMStateDescription vmstate_megasas = {
>      }
>  };
>  
> -static int megasas_scsi_uninit(PCIDevice *d)
> +static void megasas_scsi_uninit(PCIDevice *d)
>  {
>      MegasasState *s = DO_UPCAST(MegasasState, dev, d);
>  
> @@ -2051,7 +2051,6 @@ static int megasas_scsi_uninit(PCIDevice *d)
>      memory_region_destroy(&s->mmio_io);
>      memory_region_destroy(&s->port_io);
>      memory_region_destroy(&s->queue_io);
> -    return 0;
>  }
>  
>  static const struct SCSIBusInfo megasas_scsi_info = {
> 

Applied to scsi-next branch, thanks.

Paolo

Re: [Qemu-devel] [PATCH] megasas: Update function megasys_scsi_uninit

[Andreas Färber]

Am 31.07.2012 07:54, schrieb Stefan Weil:
> Commit f90c2bcdbc69e41e575f868b984c3e2de8f51bac changed
> PCIUnregisterFunc, therefore the function prototype
> needs an update.
> 
> megasas.o is currently not linked, so this bug was not
> detected by the buildbots.

Why would megasas be in master but not compiled/linked?

Andreas

-- 
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg

Re: [Qemu-devel] [PATCH] megasas: Update function megasys_scsi_uninit

[Paolo Bonzini]

Il 31/07/2012 16:39, Andreas Färber ha scritto:
>> > Commit f90c2bcdbc69e41e575f868b984c3e2de8f51bac changed
>> > PCIUnregisterFunc, therefore the function prototype
>> > needs an update.
>> > 
>> > megasas.o is currently not linked, so this bug was not
>> > detected by the buildbots.
> Why would megasas be in master but not compiled/linked?

Because Anthony objected to how it picks the initiator WWN.

Paolo

Re: [Qemu-devel] [PATCH] megasas: Update function megasys_scsi_uninit

[Andreas Färber]

Am 31.07.2012 16:43, schrieb Paolo Bonzini:
> Il 31/07/2012 16:39, Andreas Färber ha scritto:
>>>> Commit f90c2bcdbc69e41e575f868b984c3e2de8f51bac changed
>>>> PCIUnregisterFunc, therefore the function prototype
>>>> needs an update.
>>>>
>>>> megasas.o is currently not linked, so this bug was not
>>>> detected by the buildbots.
>> Why would megasas be in master but not compiled/linked?
> 
> Because Anthony objected to how it picks the initiator WWN.

Ah, anything keeping us from fixing that? :)

Andreas

-- 
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg

Re: [Qemu-devel] [PATCH] megasas: Update function megasys_scsi_uninit

[Paolo Bonzini]

Il 31/07/2012 16:46, Andreas Färber ha scritto:
> > > Why would megasas be in master but not compiled/linked?
> > Because Anthony objected to how it picks the initiator WWN.
> Ah, anything keeping us from fixing that? :)

Exact knowledge of the requirements, basically. :)

Paolo

Re: [Qemu-devel] [PATCH] megasas: Update function megasys_scsi_uninit

[Andreas Färber]

Am 31.07.2012 16:50, schrieb Paolo Bonzini:
> Il 31/07/2012 16:46, Andreas Färber ha scritto:
>>>> Why would megasas be in master but not compiled/linked?
>>> Because Anthony objected to how it picks the initiator WWN.
>> Ah, anything keeping us from fixing that? :)
> 
> Exact knowledge of the requirements, basically. :)

I.e. waiting on feedback about numeric constraints from Hannes? :)
Or waiting on general direction from Anthony?
How to make progress there for 1.2 / Soft Freeze?

Andreas

-- 
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg

Re: [Qemu-devel] [PATCH] megasas: Update function megasys_scsi_uninit

[Anthony Liguori]

Andreas Färber <afaerber@suse.de> writes:

> Am 31.07.2012 16:50, schrieb Paolo Bonzini:
>> Il 31/07/2012 16:46, Andreas Färber ha scritto:
>>>>> Why would megasas be in master but not compiled/linked?
>>>> Because Anthony objected to how it picks the initiator WWN.
>>> Ah, anything keeping us from fixing that? :)
>> 
>> Exact knowledge of the requirements, basically. :)
>
> I.e. waiting on feedback about numeric constraints from Hannes? :)
> Or waiting on general direction from Anthony?
> How to make progress there for 1.2 / Soft Freeze?

You cannot build guest visible state by casting pointers.

I'm really disappointed that this hasn't been resolved yet.  If it's not
resolved before the soft freeze, I think we ought to revert the megasas
patches completely.

Regards,

Anthony Liguori

>
> Andreas
>
> -- 
> SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
> GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg

Re: [Qemu-devel] [PATCH] megasas: Update function megasys_scsi_uninit

[Paolo Bonzini]

[-- Attachment #1: Type: text/plain, Size: 1234 bytes --]

Il 31/07/2012 17:15, Anthony Liguori ha scritto:
> Andreas Färber <afaerber@suse.de> writes:
> 
>> Am 31.07.2012 16:50, schrieb Paolo Bonzini:
>>> Il 31/07/2012 16:46, Andreas Färber ha scritto:
>>>>>> Why would megasas be in master but not compiled/linked?
>>>>> Because Anthony objected to how it picks the initiator WWN.
>>>> Ah, anything keeping us from fixing that? :)
>>>
>>> Exact knowledge of the requirements, basically. :)
>>
>> I.e. waiting on feedback about numeric constraints from Hannes? :)
>> Or waiting on general direction from Anthony?
>> How to make progress there for 1.2 / Soft Freeze?
> 
> You cannot build guest visible state by casting pointers.
> 
> I'm really disappointed that this hasn't been resolved yet.  If it's not
> resolved before the soft freeze, I think we ought to revert the megasas
> patches completely.

Hannes, can you give a quick yes/no on the approach of the attached
patch?  The address of the HBA is given by a wwn property or, in the
lack of one, by an increasing index similar to the one used for MAC
addresses.  The address of the disks is also given by a wwn property or,
in the lack of one, by combining the HBA address with the target number.

Paolo

[-- Attachment #2: 0001-megasas-generate-repeatable-WWNs.patch --]
[-- Type: text/x-patch, Size: 7630 bytes --]

>From 832fbadba4739821cac427c879fe6481f47a659a Mon Sep 17 00:00:00 2001
From: Paolo Bonzini <pbonzini@redhat.com>
Date: Tue, 31 Jul 2012 17:42:11 +0200
Subject: [PATCH] megasas: generate repeatable WWNs

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 hw/megasas.c   |   34 +++++++++++++++++++++++++---------
 hw/scsi-bus.c  |   10 ++++++++++
 hw/scsi-disk.c |    9 +++++++++
 hw/scsi.h      |    2 ++
 4 files changed, 46 insertions(+), 9 deletions(-)

diff --git a/hw/megasas.c b/hw/megasas.c
index 8a4960f..c07a2bb 100644
--- a/hw/megasas.c
+++ b/hw/megasas.c
@@ -38,6 +38,9 @@
 #define MEGASAS_MAX_SECTORS 0xFFFF      /* No real limit */
 #define MEGASAS_MAX_ARRAYS 128
 
+#define MEGASAS_ADDR_BASE 0x5525400123456000ULL
+#define MEGASAS_ADDR_STEP 0x1000ULL
+
 #define MEGASAS_FLAG_USE_JBOD      0
 #define MEGASAS_MASK_USE_JBOD      (1 << MEGASAS_FLAG_USE_JBOD)
 #define MEGASAS_FLAG_USE_MSIX      1
@@ -49,6 +52,8 @@ static const char *mfi_frame_desc[] = {
     "MFI init", "LD Read", "LD Write", "LD SCSI", "PD SCSI",
     "MFI Doorbell", "MFI Abort", "MFI SMP", "MFI Stop"};
 
+static uint64_t megasas_cur_addr = MEGASAS_ADDR_BASE;
+
 typedef struct MegasasCmd {
     uint32_t index;
     uint16_t flags;
@@ -89,6 +94,8 @@ typedef struct MegasasState {
     int shutdown_event;
     int boot_event;
 
+    uint64_t wwn;
+
     uint64_t reply_queue_pa;
     void *reply_queue;
     int reply_queue_len;
@@ -372,14 +379,17 @@ static uint64_t megasas_fw_time(void)
     return bcd_time;
 }
 
-static uint64_t megasas_gen_sas_addr(uint64_t id)
+static uint64_t megasas_get_sas_addr(MegasasState *s, uint64_t id)
 {
-    uint64_t addr;
+    return s->wwn + id;
+}
 
-    addr = 0x5001a4aULL << 36;
-    addr |= id & 0xfffffffff;
+static uint64_t megasas_disk_sas_addr(SCSIDevice *sdev)
+{
+    MegasasState *s = DO_UPCAST(MegasasState, dev.qdev,
+                                sdev->qdev.parent_bus->parent);
 
-    return addr;
+    return scsi_device_get_wwn(sdev) ?: megasas_get_sas_addr(s, sdev->id + 1);
 }
 
 /*
@@ -672,7 +682,7 @@ static int megasas_ctrl_get_info(MegasasState *s, MegasasCmd *cmd)
     info.host.type = MFI_INFO_HOST_PCIX;
     info.device.type = MFI_INFO_DEV_SAS3G;
     info.device.port_count = 2;
-    info.device.port_addr[0] = cpu_to_le64(megasas_gen_sas_addr((uint64_t)s));
+    info.device.port_addr[0] = cpu_to_le64(megasas_get_sas_addr(s, 0));
 
     memcpy(info.product_name, "MegaRAID SAS 8708EM2", 20);
     snprintf(info.serial_number, 32, "QEMU%08lx",
@@ -761,7 +771,7 @@ static int megasas_mfc_get_defaults(MegasasState *s, MegasasCmd *cmd)
         return MFI_STAT_INVALID_PARAMETER;
     }
 
-    info.sas_addr = cpu_to_le64(megasas_gen_sas_addr((uint64_t)s));
+    info.sas_addr = cpu_to_le64(megasas_get_sas_addr(s, 0));
     info.stripe_size = 3;
     info.flush_time = 4;
     info.background_rate = 30;
@@ -891,7 +901,7 @@ static int megasas_dcmd_pd_get_list(MegasasState *s, MegasasCmd *cmd)
         info.addr[num_pd_disks].scsi_dev_type = sdev->type;
         info.addr[num_pd_disks].connect_port_bitmap = 0x1;
         info.addr[num_pd_disks].sas_addr[0] =
-            cpu_to_le64(megasas_gen_sas_addr((uint64_t)sdev));
+            cpu_to_le64(megasas_disk_sas_addr(sdev));
         num_pd_disks++;
         offset += sizeof(struct mfi_pd_address);
     }
@@ -994,7 +1004,7 @@ static int megasas_pd_get_info_submit(SCSIDevice *sdev, int lun,
     info->slot_number = (sdev->id & 0xFF);
     info->path_info.count = 1;
     info->path_info.sas_addr[0] =
-        cpu_to_le64(megasas_gen_sas_addr((uint64_t)sdev));
+        cpu_to_le64(megasas_disk_sas_addr(sdev));
     info->connected_port_bitmap = 0x1;
     info->device_speed = 1;
     info->link_speed = 1;
@@ -2069,6 +2079,11 @@ static int megasas_scsi_init(PCIDevice *dev)
     uint8_t *pci_conf;
     int i, bar_type;
 
+    if (!s->wwn) {
+        s->wwn = megasas_cur_addr;
+        megasas_cur_addr += MEGASAS_ADDR_STEP;
+    }
+
     pci_conf = s->dev.config;
 
     /* PCI latency timer = 0 */
@@ -2136,6 +2151,7 @@ static Property megasas_properties[] = {
                        MEGASAS_DEFAULT_SGE),
     DEFINE_PROP_UINT32("max_cmds", MegasasState, fw_cmds,
                        MEGASAS_DEFAULT_FRAMES),
+    DEFINE_PROP_HEX64("wwn", MegasasState, wwn, 0),
 #ifdef USE_MSIX
     DEFINE_PROP_BIT("use_msix", MegasasState, flags,
                     MEGASAS_FLAG_USE_MSIX, false),
diff --git a/hw/scsi-bus.c b/hw/scsi-bus.c
index 68049f6..79c732a 100644
--- a/hw/scsi-bus.c
+++ b/hw/scsi-bus.c
@@ -71,6 +71,16 @@ static void scsi_device_unit_attention_reported(SCSIDevice *s)
     }
 }
 
+uint64_t scsi_device_get_wwn(SCSIDevice *s)
+{
+    SCSIDeviceClass *sc = SCSI_DEVICE_GET_CLASS(s);
+    if (sc->get_wwn) {
+        return sc->get_wwn(s);
+    } else {
+        return 0;
+    }
+}
+
 /* Create a scsi bus, and attach devices to it.  */
 void scsi_bus_new(SCSIBus *bus, DeviceState *host, const SCSIBusInfo *info)
 {
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index a9c7279..2cb9d4e 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -2239,6 +2239,12 @@ static SCSIRequest *scsi_block_new_request(SCSIDevice *d, uint32_t tag,
 }
 #endif
 
+static uint64_t scsi_disk_get_wwn(SCSIDevice *sdev)
+{
+    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, sdev);
+    return s->wwn;
+}
+
 #define DEFINE_SCSI_DISK_PROPERTIES()                                \
     DEFINE_BLOCK_PROPERTIES(SCSIDiskState, qdev.conf),               \
     DEFINE_PROP_STRING("ver", SCSIDiskState, version),               \
@@ -2281,6 +2287,7 @@ static void scsi_hd_class_initfn(ObjectClass *klass, void *data)
     sc->init         = scsi_hd_initfn;
     sc->destroy      = scsi_destroy;
     sc->alloc_req    = scsi_new_request;
+    sc->get_wwn      = scsi_disk_get_wwn;
     sc->unit_attention_reported = scsi_disk_unit_attention_reported;
     dc->fw_name = "disk";
     dc->desc = "virtual SCSI disk";
@@ -2310,6 +2317,7 @@ static void scsi_cd_class_initfn(ObjectClass *klass, void *data)
     sc->init         = scsi_cd_initfn;
     sc->destroy      = scsi_destroy;
     sc->alloc_req    = scsi_new_request;
+    sc->get_wwn      = scsi_disk_get_wwn;
     sc->unit_attention_reported = scsi_disk_unit_attention_reported;
     dc->fw_name = "disk";
     dc->desc = "virtual SCSI CD-ROM";
@@ -2372,6 +2380,7 @@ static void scsi_disk_class_initfn(ObjectClass *klass, void *data)
     sc->init         = scsi_disk_initfn;
     sc->destroy      = scsi_destroy;
     sc->alloc_req    = scsi_new_request;
+    sc->get_wwn      = scsi_disk_get_wwn;
     sc->unit_attention_reported = scsi_disk_unit_attention_reported;
     dc->fw_name = "disk";
     dc->desc = "virtual SCSI disk or CD-ROM (legacy)";
diff --git a/hw/scsi.h b/hw/scsi.h
index 1aeee46..053a529 100644
--- a/hw/scsi.h
+++ b/hw/scsi.h
@@ -76,6 +76,7 @@ typedef struct SCSIDeviceClass {
     SCSIRequest *(*alloc_req)(SCSIDevice *s, uint32_t tag, uint32_t lun,
                               uint8_t *buf, void *hba_private);
     void (*unit_attention_reported)(SCSIDevice *s);
+    uint64_t (*get_wwn)(SCSIDevice *s);
 } SCSIDeviceClass;
 
 struct SCSIDevice
@@ -242,6 +243,7 @@ void scsi_req_abort(SCSIRequest *req, int status);
 void scsi_req_cancel(SCSIRequest *req);
 void scsi_req_retry(SCSIRequest *req);
 void scsi_device_purge_requests(SCSIDevice *sdev, SCSISense sense);
+uint64_t scsi_device_get_wwn(SCSIDevice *sdev);
 void scsi_device_set_ua(SCSIDevice *sdev, SCSISense sense);
 void scsi_device_report_change(SCSIDevice *dev, SCSISense sense);
 int scsi_device_get_sense(SCSIDevice *dev, uint8_t *buf, int len, bool fixed);
-- 
1.7.10.4

Re: [Qemu-devel] [PATCH] megasas: Update function megasys_scsi_uninit

[Hannes Reinecke]

On 07/31/2012 05:45 PM, Paolo Bonzini wrote:
> Il 31/07/2012 17:15, Anthony Liguori ha scritto:
>> Andreas Färber <afaerber@suse.de> writes:
>>
>>> Am 31.07.2012 16:50, schrieb Paolo Bonzini:
>>>> Il 31/07/2012 16:46, Andreas Färber ha scritto:
>>>>>>> Why would megasas be in master but not compiled/linked?
>>>>>> Because Anthony objected to how it picks the initiator WWN.
>>>>> Ah, anything keeping us from fixing that? :)
>>>>
>>>> Exact knowledge of the requirements, basically. :)
>>>
>>> I.e. waiting on feedback about numeric constraints from Hannes? :)
>>> Or waiting on general direction from Anthony?
>>> How to make progress there for 1.2 / Soft Freeze?
>>
>> You cannot build guest visible state by casting pointers.
>>
>> I'm really disappointed that this hasn't been resolved yet.  If it's not
>> resolved before the soft freeze, I think we ought to revert the megasas
>> patches completely.
>
> Hannes, can you give a quick yes/no on the approach of the attached
> patch?  The address of the HBA is given by a wwn property or, in the
> lack of one, by an increasing index similar to the one used for MAC
> addresses.  The address of the disks is also given by a wwn property or,
> in the lack of one, by combining the HBA address with the target number.
>
Sorry for not answering earlier, but real life interfered
(customer escalations et al ...)

Anyway, Paolo, your approach is partially correct.
Ad 1, yes, we should be having a property for setting the SAS address of 
the HBA. So that's okay and can go in. Anyone concerned with uniqueness 
can then set it as appropriate.

Ad 2: no, the SAS address for the devices is _not_ the WWN.
The WWN is the ID of the LUN, whereas the SAS address is the ID of the 
Target. So to be correct we would need to generate unique SAS addressed 
per target which needs to be different from the WWN.
However, megasas does not need to present SAS addresses here; we can set 
the interface to PCI-E (instead of SAS) and just use the LUN number.
Sadly I've yet to figure out the code for PCIE.
(Doing it correctly involves staring a binary output and figuring the 
meaning of bits. Did I mention I don't have documentation for that beast?)
That's what's stalled the patch for now.

I see to have a patch cooked up tomorrow.

Cheers,

Hannes
-- 
Dr. Hannes Reinecke		      zSeries & Storage
hare@suse.de			      +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: Markus Rex, HRB 16746 (AG Nürnberg)

Re: [Qemu-devel] [PATCH] megasas: Update function megasys_scsi_uninit

[Paolo Bonzini]

Il 01/08/2012 00:17, Hannes Reinecke ha scritto:
> Ad 2: no, the SAS address for the devices is _not_ the WWN.
> The WWN is the ID of the LUN, whereas the SAS address is the ID of the
> Target. So to be correct we would need to generate unique SAS addressed
> per target which needs to be different from the WWN.

Oh, that's even easier then, just delete all the get_wwn stuff and use
HBA address + 1 + sdev->id.

Paolo

> However, megasas does not need to present SAS addresses here; we can set
> the interface to PCI-E (instead of SAS) and just use the LUN number.
> Sadly I've yet to figure out the code for PCIE.
> (Doing it correctly involves staring a binary output and figuring the
> meaning of bits. Did I mention I don't have documentation for that beast?)
> That's what's stalled the patch for now.

Re: [Qemu-devel] [PATCH] megasas: Update function megasys_scsi_uninit

[Hannes Reinecke]

On 08/01/2012 09:38 AM, Paolo Bonzini wrote:
> Il 01/08/2012 00:17, Hannes Reinecke ha scritto:
>> Ad 2: no, the SAS address for the devices is _not_ the WWN.
>> The WWN is the ID of the LUN, whereas the SAS address is the ID of the
>> Target. So to be correct we would need to generate unique SAS addressed
>> per target which needs to be different from the WWN.
> 
> Oh, that's even easier then, just delete all the get_wwn stuff and use
> HBA address + 1 + sdev->id.
> 
Which HBA address? You that one I wasn't supposed to use ? :-)

As said, I'm currently working on a patch. But yeah, that's
essentially what I'll be doing.

Stay tuned.

Cheers,

Hannes
-- 
Dr. Hannes Reinecke		      zSeries & Storage
hare@suse.de			      +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)

Re: [Qemu-devel] [PATCH] megasas: Update function megasys_scsi_uninit

[Paolo Bonzini]

Il 01/08/2012 09:54, Hannes Reinecke ha scritto:
> On 08/01/2012 09:38 AM, Paolo Bonzini wrote:
>> Il 01/08/2012 00:17, Hannes Reinecke ha scritto:
>>> Ad 2: no, the SAS address for the devices is _not_ the WWN.
>>> The WWN is the ID of the LUN, whereas the SAS address is the ID of the
>>> Target. So to be correct we would need to generate unique SAS addressed
>>> per target which needs to be different from the WWN.
>>
>> Oh, that's even easier then, just delete all the get_wwn stuff and use
>> HBA address + 1 + sdev->id.
>>
> Which HBA address?

The HBA SAS address. :)

Paolo

Re: [Qemu-devel] [PATCH] megasas: Update function megasys_scsi_uninit

[Hannes Reinecke]

On 08/01/2012 10:01 AM, Paolo Bonzini wrote:
> Il 01/08/2012 09:54, Hannes Reinecke ha scritto:
>> On 08/01/2012 09:38 AM, Paolo Bonzini wrote:
>>> Il 01/08/2012 00:17, Hannes Reinecke ha scritto:
>>>> Ad 2: no, the SAS address for the devices is _not_ the WWN.
>>>> The WWN is the ID of the LUN, whereas the SAS address is the ID of the
>>>> Target. So to be correct we would need to generate unique SAS addressed
>>>> per target which needs to be different from the WWN.
>>>
>>> Oh, that's even easier then, just delete all the get_wwn stuff and use
>>> HBA address + 1 + sdev->id.
>>>
>> Which HBA address?
> 
> The HBA SAS address. :)
> 
Ah.

I've now send a new patch fixing things up.
Hopefully it gains Anthonys approval.

Anthony, I'm dead sorry but didn't manage to type your e-mail
address correctly.
Hope it doesn't fall through the cracks because of this ..

Cheers,

Hannes
-- 
Dr. Hannes Reinecke		      zSeries & Storage
hare@suse.de			      +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)

Re: [Qemu-devel] [PATCH] megasas: Update function megasys_scsi_uninit

[Paolo Bonzini]

Il 31/07/2012 16:55, Andreas Färber ha scritto:
>> > Exact knowledge of the requirements, basically. :)
> I.e. waiting on feedback about numeric constraints from Hannes? :)

Yeah, mostly which parts are 100% necessary and which are not.  Do you
need absolutely a WWN for each disk?

> Or waiting on general direction from Anthony?

No, we agreed on that.

> How to make progress there for 1.2 / Soft Freeze?

No possibility of regressions, so we can do it during hard freeze.  But
it is really a small task once we agreed on what has to be done.

Paolo