From: Alexander Graf <agraf@suse.de>
To: Li Zhang <zhlcindy@gmail.com>
Cc: aliguori@us.ibm.com, qemu-devel@nongnu.org,
Li Zhang <zhlcindy@linux.vnet.ibm.com>,
qemu-ppc@nongnu.org, afaerber@suse.de,
david@gibson.dropbear.id.au
Subject: Re: [Qemu-devel] [Qemu-ppc][PATCH v7 1/3] Add USB option in machine options
Date: Tue, 14 Aug 2012 12:39:07 +0200 [thread overview]
Message-ID: <502A2ACB.7010901@suse.de> (raw)
In-Reply-To: <1344307320-25094-2-git-send-email-zhlcindy@linux.vnet.ibm.com>
On 08/07/2012 04:41 AM, Li Zhang wrote:
> When -usb option is used, global varible usb_enabled is set.
> And all the plafrom will create one USB controller according
> to this variable. In fact, global varibles make code hard
> to read.
>
> So this patch is to remove global variable usb_enabled and
> add USB option in machine options. All the plaforms will get
> USB option value from machine options.
>
> USB option of machine options will be set either by:
> * -usb
> * -machine type=pseries,usb=on
>
> Both these ways can work now. They both set USB option in
> machine options. In the future, the first way will be removed.
>
> Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
> ---
> hw/nseries.c | 9 +++++++++
> hw/pc_piix.c | 6 ++++++
> hw/ppc_newworld.c | 10 +++++++++-
> hw/ppc_oldworld.c | 8 ++++++++
> hw/ppc_prep.c | 7 +++++++
> hw/pxa2xx.c | 15 +++++++++++++++
> hw/realview.c | 8 ++++++++
> hw/spapr.c | 12 ++++++++++++
> hw/versatilepb.c | 8 ++++++++
> qemu-config.c | 4 ++++
> sysemu.h | 1 -
> vl.c | 29 +++++++++++++++++++++++------
> 12 files changed, 109 insertions(+), 8 deletions(-)
>
> diff --git a/hw/nseries.c b/hw/nseries.c
> index 4df2670..8e385b7 100644
> --- a/hw/nseries.c
> +++ b/hw/nseries.c
> @@ -1282,6 +1282,9 @@ static void n8x0_init(ram_addr_t ram_size, const char *boot_device,
> int sdram_size = binfo->ram_size;
> DisplayState *ds;
>
> + QemuOpts *mach_opts;
> + bool usb_enabled = false;
> +
> s->mpu = omap2420_mpu_init(sysmem, sdram_size, cpu_model);
>
> /* Setup peripherals
> @@ -1322,6 +1325,12 @@ static void n8x0_init(ram_addr_t ram_size, const char *boot_device,
> n8x0_dss_setup(s);
> n8x0_cbus_setup(s);
> n8x0_uart_setup(s);
> +
> + mach_opts = qemu_opts_find(qemu_find_opts("machine"), 0);
> + if (mach_opts) {
> + usb_enabled = qemu_opt_get_bool(mach_opts, "usb", false);
> + }
> +
> if (usb_enabled)
> n8x0_usb_setup(s);
>
> diff --git a/hw/pc_piix.c b/hw/pc_piix.c
> index 0c0096f..0bf25d0 100644
> --- a/hw/pc_piix.c
> +++ b/hw/pc_piix.c
> @@ -148,6 +148,8 @@ static void pc_init1(MemoryRegion *system_memory,
> MemoryRegion *pci_memory;
> MemoryRegion *rom_memory;
> void *fw_cfg = NULL;
> + QemuOpts *mach_opts;
> + bool usb_enabled = false;
>
> pc_cpus_init(cpu_model);
>
> @@ -267,6 +269,10 @@ static void pc_init1(MemoryRegion *system_memory,
> pc_cmos_init(below_4g_mem_size, above_4g_mem_size, boot_device,
> floppy, idebus[0], idebus[1], rtc_state);
>
> + mach_opts = qemu_opts_find(qemu_find_opts("machine"), 0);
> + if (mach_opts) {
> + usb_enabled = qemu_opt_get_bool(mach_opts, "usb", false);
> + }
> if (pci_enabled && usb_enabled) {
> pci_create_simple(pci_bus, piix3_devfn + 2, "piix3-usb-uhci");
> }
> diff --git a/hw/ppc_newworld.c b/hw/ppc_newworld.c
> index 4e2a6e6..1a324eb 100644
> --- a/hw/ppc_newworld.c
> +++ b/hw/ppc_newworld.c
> @@ -159,6 +159,9 @@ static void ppc_core99_init (ram_addr_t ram_size,
>
> linux_boot = (kernel_filename != NULL);
>
> + QemuOpts *mach_opts;
> + bool usb_enabled = false;
> +
> /* init CPUs */
> if (cpu_model == NULL)
> #ifdef TARGET_PPC64
> @@ -350,7 +353,7 @@ static void ppc_core99_init (ram_addr_t ram_size,
>
> /* cuda also initialize ADB */
> if (machine_arch == ARCH_MAC99_U3) {
> - usb_enabled = 1;
> + usb_enabled = true;
> }
> cuda_init(&cuda_mem, pic[0x19]);
>
> @@ -360,6 +363,11 @@ static void ppc_core99_init (ram_addr_t ram_size,
> macio_init(pci_bus, PCI_DEVICE_ID_APPLE_UNI_N_KEYL, 0, pic_mem,
> dbdma_mem, cuda_mem, NULL, 3, ide_mem, escc_bar);
>
> + mach_opts = qemu_opts_find(qemu_find_opts("machine"), 0);
> + if (mach_opts) {
> + usb_enabled = qemu_opt_get_bool(mach_opts, "usb", true);
> + }
> +
> if (usb_enabled) {
> pci_create_simple(pci_bus, -1, "pci-ohci");
> }
> diff --git a/hw/ppc_oldworld.c b/hw/ppc_oldworld.c
> index f2c6908..da05705 100644
> --- a/hw/ppc_oldworld.c
> +++ b/hw/ppc_oldworld.c
> @@ -101,6 +101,9 @@ static void ppc_heathrow_init (ram_addr_t ram_size,
>
> linux_boot = (kernel_filename != NULL);
>
> + QemuOpts *mach_opts;
> + bool usb_enabled = true;
> +
> /* init CPUs */
> if (cpu_model == NULL)
> cpu_model = "G3";
> @@ -286,6 +289,11 @@ static void ppc_heathrow_init (ram_addr_t ram_size,
> macio_init(pci_bus, PCI_DEVICE_ID_APPLE_343S1201, 1, pic_mem,
> dbdma_mem, cuda_mem, nvr, 2, ide_mem, escc_bar);
>
> + mach_opts = qemu_opts_find(qemu_find_opts("machine"), 0);
> + if (mach_opts) {
> + usb_enabled = qemu_opt_get_bool(mach_opts, "usb", true);
> + }
> +
> if (usb_enabled) {
> pci_create_simple(pci_bus, -1, "pci-ohci");
> }
> diff --git a/hw/ppc_prep.c b/hw/ppc_prep.c
> index be2b268..dc294ae 100644
> --- a/hw/ppc_prep.c
> +++ b/hw/ppc_prep.c
> @@ -484,6 +484,9 @@ static void ppc_prep_init (ram_addr_t ram_size,
>
> linux_boot = (kernel_filename != NULL);
>
> + QemuOpts *mach_opts;
> + bool usb_enabled = true;
> +
> /* init CPUs */
> if (cpu_model == NULL)
> cpu_model = "602";
> @@ -661,6 +664,10 @@ static void ppc_prep_init (ram_addr_t ram_size,
> memory_region_add_subregion(sysmem, 0xFEFF0000, xcsr);
> #endif
>
> + mach_opts = qemu_opts_find(qemu_find_opts("machine"), 0);
> + if (mach_opts) {
> + usb_enabled = qemu_opt_get_bool(mach_opts, "usb", true);
> + }
> if (usb_enabled) {
> pci_create_simple(pci_bus, -1, "pci-ohci");
> }
> diff --git a/hw/pxa2xx.c b/hw/pxa2xx.c
> index d5f1420..ed87797 100644
> --- a/hw/pxa2xx.c
> +++ b/hw/pxa2xx.c
> @@ -2007,6 +2007,9 @@ PXA2xxState *pxa270_init(MemoryRegion *address_space,
> PXA2xxState *s;
> int i;
> DriveInfo *dinfo;
> + QemuOpts *mach_opts;
> + bool usb_enabled = false;
> +
> s = (PXA2xxState *) g_malloc0(sizeof(PXA2xxState));
>
> if (revision && strncmp(revision, "pxa27", 5)) {
> @@ -2108,6 +2111,11 @@ PXA2xxState *pxa270_init(MemoryRegion *address_space,
> s->ssp[i] = (SSIBus *)qdev_get_child_bus(dev, "ssi");
> }
>
> + mach_opts = qemu_opts_find(qemu_find_opts("machine"), 0);
> + if (mach_opts) {
> + usb_enabled = qemu_opt_get_bool(mach_opts, "usb", false);
> + }
> +
> if (usb_enabled) {
> sysbus_create_simple("sysbus-ohci", 0x4c000000,
> qdev_get_gpio_in(s->pic, PXA2XX_PIC_USBH1));
> @@ -2144,6 +2152,8 @@ PXA2xxState *pxa255_init(MemoryRegion *address_space, unsigned int sdram_size)
> PXA2xxState *s;
> int i;
> DriveInfo *dinfo;
> + QemuOpts *mach_opts;
> + bool usb_enabled = false;
>
> s = (PXA2xxState *) g_malloc0(sizeof(PXA2xxState));
>
> @@ -2239,6 +2249,11 @@ PXA2xxState *pxa255_init(MemoryRegion *address_space, unsigned int sdram_size)
> s->ssp[i] = (SSIBus *)qdev_get_child_bus(dev, "ssi");
> }
>
> + mach_opts = qemu_opts_find(qemu_find_opts("machine"), 0);
> + if (mach_opts) {
> + usb_enabled = qemu_opt_get_bool(mach_opts, "usb", false);
> + }
> +
> if (usb_enabled) {
> sysbus_create_simple("sysbus-ohci", 0x4c000000,
> qdev_get_gpio_in(s->pic, PXA2XX_PIC_USBH1));
> diff --git a/hw/realview.c b/hw/realview.c
> index 19db4d0..543d5dc 100644
> --- a/hw/realview.c
> +++ b/hw/realview.c
> @@ -73,6 +73,8 @@ static void realview_init(ram_addr_t ram_size,
> uint32_t proc_id = 0;
> uint32_t sys_id;
> ram_addr_t low_ram_size;
> + QemuOpts *mach_opts;
> + bool usb_enabled = true;
>
> switch (board_type) {
> case BOARD_EB:
> @@ -227,6 +229,12 @@ static void realview_init(ram_addr_t ram_size,
> sysbus_connect_irq(busdev, 2, pic[50]);
> sysbus_connect_irq(busdev, 3, pic[51]);
> pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci");
> +
> + mach_opts = qemu_opts_find(qemu_find_opts("machine"), 0);
> + if (mach_opts) {
> + usb_enabled = qemu_opt_get_bool(mach_opts, "usb", true);
> + }
> +
> if (usb_enabled) {
> pci_create_simple(pci_bus, -1, "pci-ohci");
> }
> diff --git a/hw/spapr.c b/hw/spapr.c
> index 81c9343..4dc5e59 100644
> --- a/hw/spapr.c
> +++ b/hw/spapr.c
> @@ -575,6 +575,8 @@ static void ppc_spapr_init(ram_addr_t ram_size,
> long load_limit, rtas_limit, fw_size;
> long pteg_shift = 17;
> char *filename;
> + QemuOpts *mach_opts;
> + bool usb_enabled = true;
>
> spapr = g_malloc0(sizeof(*spapr));
> QLIST_INIT(&spapr->phbs);
> @@ -710,6 +712,16 @@ static void ppc_spapr_init(ram_addr_t ram_size,
> spapr_vscsi_create(spapr->vio_bus);
> }
>
> + mach_opts = qemu_opts_find(qemu_find_opts("machine"), 0);
> + if (mach_opts) {
> + usb_enabled = qemu_opt_get_bool(mach_opts, "usb", true);
> + }
> +
> + if (usb_enabled) {
> + pci_create_simple(QLIST_FIRST(&spapr->phbs)->host_state.bus,
> + -1, "pci-ohci");
> + }
> +
> if (rma_size < (MIN_RMA_SLOF << 20)) {
> fprintf(stderr, "qemu: pSeries SLOF firmware requires >= "
> "%ldM guest RMA (Real Mode Area memory)\n", MIN_RMA_SLOF);
> diff --git a/hw/versatilepb.c b/hw/versatilepb.c
> index 4fd5d9b..4b2f70d 100644
> --- a/hw/versatilepb.c
> +++ b/hw/versatilepb.c
> @@ -188,6 +188,8 @@ static void versatile_init(ram_addr_t ram_size,
> int n;
> int done_smc = 0;
> DriveInfo *dinfo;
> + QemuOpts *mach_opts;
> + bool usb_enabled = false;
>
> if (!cpu_model) {
> cpu_model = "arm926";
> @@ -247,6 +249,12 @@ static void versatile_init(ram_addr_t ram_size,
> pci_nic_init_nofail(nd, "rtl8139", NULL);
> }
> }
> +
> + mach_opts = qemu_opts_find(qemu_find_opts("machine"), 0);
> + if (mach_opts) {
> + usb_enabled = qemu_opt_get_bool(mach_opts, "usb", false);
> + }
> +
> if (usb_enabled) {
> pci_create_simple(pci_bus, -1, "pci-ohci");
> }
> diff --git a/qemu-config.c b/qemu-config.c
> index 5c3296b..b86ee36 100644
> --- a/qemu-config.c
> +++ b/qemu-config.c
> @@ -595,6 +595,10 @@ static QemuOptsList qemu_machine_opts = {
> .name = "dt_compatible",
> .type = QEMU_OPT_STRING,
> .help = "Overrides the \"compatible\" property of the dt root node",
> + },{
> + .name = "usb",
> + .type = QEMU_OPT_BOOL,
> + .help = "Set on/off to enable/disable usb",
> },
> { /* End of list */ }
> },
> diff --git a/sysemu.h b/sysemu.h
> index 4669348..7fbf8f4 100644
> --- a/sysemu.h
> +++ b/sysemu.h
> @@ -118,7 +118,6 @@ extern const char *keyboard_layout;
> extern int win2k_install_hack;
> extern int alt_grab;
> extern int ctrl_grab;
> -extern int usb_enabled;
> extern int smp_cpus;
> extern int max_cpus;
> extern int cursor_hide;
> diff --git a/vl.c b/vl.c
> index e71cb30..77e8962 100644
> --- a/vl.c
> +++ b/vl.c
> @@ -198,7 +198,6 @@ CharDriverState *serial_hds[MAX_SERIAL_PORTS];
> CharDriverState *parallel_hds[MAX_PARALLEL_PORTS];
> CharDriverState *virtcon_hds[MAX_VIRTIO_CONSOLES];
> int win2k_install_hack = 0;
> -int usb_enabled = 0;
> int singlestep = 0;
> int smp_cpus = 1;
> int max_cpus = 0;
> @@ -1043,13 +1042,24 @@ static void smp_parse(const char *optarg)
> /***********************************************************/
> /* USB devices */
>
> +static inline bool usb_enabled(bool default_usb)
> +{
> + QemuOpts *mach_opts;
> + mach_opts = qemu_opts_find(qemu_find_opts("machine"), 0);
> + if (mach_opts) {
> + return qemu_opt_get_bool(mach_opts, "usb", default_usb);
> + }
> + return default_usb;
> +}
If you move this function to sysemu.h and simply do a global
s/usb_enabled/usb_enabled(false)/ the patch will be a lot smaller and we
will have a lot less duplicated code.
Alex
next prev parent reply other threads:[~2012-08-14 10:39 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-07 2:41 [Qemu-devel] [Qemu-ppc][PATCH v7 0/3] Add USB enablement and VGA enablement on sPAPR Li Zhang
2012-08-07 2:41 ` [Qemu-devel] [Qemu-ppc][PATCH v7 1/3] Add USB option in machine options Li Zhang
2012-08-07 12:19 ` [Qemu-devel] [RFC] usb and s390 Christian Borntraeger
2012-08-07 12:50 ` Li Zhang
2012-08-07 14:20 ` Eric Blake
2012-08-07 12:19 ` [Qemu-devel] [RFC/PATCH 1/1] USB code fenced for s390 Christian Borntraeger
2012-08-07 12:26 ` Peter Maydell
2012-08-07 20:22 ` Blue Swirl
2012-08-08 6:29 ` Christian Borntraeger
2012-08-07 12:57 ` Andreas Färber
2012-08-07 12:59 ` Li Zhang
2012-08-14 10:39 ` Alexander Graf [this message]
2012-08-14 14:59 ` [Qemu-devel] [Qemu-ppc][PATCH v7 1/3] Add USB option in machine options Li Zhang
2012-08-14 10:46 ` Alexander Graf
2012-08-14 15:01 ` Li Zhang
2012-08-14 23:10 ` [Qemu-devel] [Qemu-ppc] [PATCH " David Gibson
2012-08-14 23:41 ` Alexander Graf
2012-08-15 0:09 ` Benjamin Herrenschmidt
2012-08-15 1:24 ` Li Zhang
2012-08-15 1:47 ` David Gibson
2012-08-15 2:50 ` Li Zhang
2012-08-15 2:57 ` David Gibson
2012-08-15 5:44 ` Li Zhang
2012-08-15 11:13 ` David Gibson
2012-08-15 14:17 ` Li Zhang
2012-08-07 2:41 ` [Qemu-devel] [Qemu-ppc][PATCH v7 2/3] Add one new file vga-pci.h and cleanup on all platforms Li Zhang
2012-08-14 11:04 ` Alexander Graf
2012-08-07 2:42 ` [Qemu-devel] [Qemu-ppc][PATCH v7 3/3] spapr: Add support for -vga option Li Zhang
2012-08-14 11:04 ` Alexander Graf
2012-08-14 12:04 ` Benjamin Herrenschmidt
2012-08-14 12:13 ` David Gibson
2012-08-14 15:13 ` Li Zhang
2012-08-14 17:19 ` Li Zhang
2012-08-14 17:52 ` Li Zhang
2012-08-14 23:11 ` [Qemu-devel] [Qemu-ppc] [PATCH " David Gibson
2012-08-14 15:07 ` [Qemu-devel] [Qemu-ppc][PATCH " Li Zhang
2012-08-07 15:05 ` [Qemu-devel] [Qemu-ppc][PATCH v7 0/3] Add USB enablement and VGA enablement on sPAPR Li Zhang
2012-08-14 11:04 ` Alexander Graf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=502A2ACB.7010901@suse.de \
--to=agraf@suse.de \
--cc=afaerber@suse.de \
--cc=aliguori@us.ibm.com \
--cc=david@gibson.dropbear.id.au \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
--cc=zhlcindy@gmail.com \
--cc=zhlcindy@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).