From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
Anisa Su <anisa.su@samsung.com>, Fan Ni <fan.ni@samsung.com>,
Jonathan Cameron <Jonathan.Cameron@huawei.com>
Subject: [PULL 88/97] hw/cxl: mailbox-utils: 0x5600 - FMAPI Get DCD Info
Date: Mon, 14 Jul 2025 19:10:05 -0400 [thread overview]
Message-ID: <505870dd7a0fd4756319ddfe6e3a4497b1ebf266.1752534227.git.mst@redhat.com> (raw)
In-Reply-To: <cover.1752534227.git.mst@redhat.com>
From: Anisa Su <anisa.su@samsung.com>
FM DCD Management command 0x5600 implemented per CXL 3.2 Spec Section 7.6.7.6.1.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Anisa Su <anisa.su@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250714174509.1984430-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
include/hw/cxl/cxl_device.h | 1 +
hw/cxl/cxl-mailbox-utils.c | 59 +++++++++++++++++++++++++++++++++++++
hw/mem/cxl_type3.c | 4 +++
3 files changed, 64 insertions(+)
diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
index a151e19da8..7eade9cf8a 100644
--- a/include/hw/cxl/cxl_device.h
+++ b/include/hw/cxl/cxl_device.h
@@ -530,6 +530,7 @@ typedef struct CXLDCRegion {
uint32_t dsmadhandle;
uint8_t flags;
unsigned long *blk_bitmap;
+ uint64_t supported_blk_size_bitmask;
} CXLDCRegion;
typedef struct CXLSetFeatureInfo {
diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
index 0b615ea37a..3304048922 100644
--- a/hw/cxl/cxl-mailbox-utils.c
+++ b/hw/cxl/cxl-mailbox-utils.c
@@ -23,6 +23,7 @@
#include "qemu/uuid.h"
#include "system/hostmem.h"
#include "qemu/range.h"
+#include "qapi/qapi-types-cxl.h"
#define CXL_CAPACITY_MULTIPLIER (256 * MiB)
#define CXL_DC_EVENT_LOG_SIZE 8
@@ -117,6 +118,8 @@ enum {
#define GET_PHYSICAL_PORT_STATE 0x1
TUNNEL = 0x53,
#define MANAGEMENT_COMMAND 0x0
+ FMAPI_DCD_MGMT = 0x56,
+ #define GET_DCD_INFO 0x0
};
/* CCI Message Format CXL r3.1 Figure 7-19 */
@@ -3237,6 +3240,52 @@ static CXLRetCode cmd_dcd_release_dyn_cap(const struct cxl_cmd *cmd,
return CXL_MBOX_SUCCESS;
}
+/* CXL r3.2 section 7.6.7.6.1: Get DCD Info (Opcode 5600h) */
+static CXLRetCode cmd_fm_get_dcd_info(const struct cxl_cmd *cmd,
+ uint8_t *payload_in,
+ size_t len_in,
+ uint8_t *payload_out,
+ size_t *len_out,
+ CXLCCI *cci)
+{
+ struct {
+ uint8_t num_hosts;
+ uint8_t num_regions_supported;
+ uint8_t rsvd1[2];
+ uint16_t supported_add_sel_policy_bitmask;
+ uint8_t rsvd2[2];
+ uint16_t supported_removal_policy_bitmask;
+ uint8_t sanitize_on_release_bitmask;
+ uint8_t rsvd3;
+ uint64_t total_dynamic_capacity;
+ uint64_t region_blk_size_bitmasks[8];
+ } QEMU_PACKED *out = (void *)payload_out;
+ CXLType3Dev *ct3d = CXL_TYPE3(cci->d);
+ CXLDCRegion *region;
+ int i;
+
+ out->num_hosts = 1;
+ out->num_regions_supported = ct3d->dc.num_regions;
+ stw_le_p(&out->supported_add_sel_policy_bitmask,
+ BIT(CXL_EXTENT_SELECTION_POLICY_PRESCRIPTIVE));
+ stw_le_p(&out->supported_removal_policy_bitmask,
+ BIT(CXL_EXTENT_REMOVAL_POLICY_PRESCRIPTIVE));
+ out->sanitize_on_release_bitmask = 0;
+
+ stq_le_p(&out->total_dynamic_capacity,
+ ct3d->dc.total_capacity / CXL_CAPACITY_MULTIPLIER);
+
+ for (i = 0; i < ct3d->dc.num_regions; i++) {
+ region = &ct3d->dc.regions[i];
+ memcpy(&out->region_blk_size_bitmasks[i],
+ ®ion->supported_blk_size_bitmask,
+ sizeof(out->region_blk_size_bitmasks[i]));
+ }
+
+ *len_out = sizeof(*out);
+ return CXL_MBOX_SUCCESS;
+}
+
static const struct cxl_cmd cxl_cmd_set[256][256] = {
[INFOSTAT][BACKGROUND_OPERATION_ABORT] = { "BACKGROUND_OPERATION_ABORT",
cmd_infostat_bg_op_abort, 0, 0 },
@@ -3350,6 +3399,11 @@ static const struct cxl_cmd cxl_cmd_set_sw[256][256] = {
cmd_tunnel_management_cmd, ~0, 0 },
};
+static const struct cxl_cmd cxl_cmd_set_fm_dcd[256][256] = {
+ [FMAPI_DCD_MGMT][GET_DCD_INFO] = { "GET_DCD_INFO",
+ cmd_fm_get_dcd_info, 0, 0 },
+};
+
/*
* While the command is executing in the background, the device should
* update the percentage complete in the Background Command Status Register
@@ -3624,7 +3678,12 @@ void cxl_initialize_t3_fm_owned_ld_mctpcci(CXLCCI *cci, DeviceState *d,
DeviceState *intf,
size_t payload_max)
{
+ CXLType3Dev *ct3d = CXL_TYPE3(d);
+
cxl_copy_cci_commands(cci, cxl_cmd_set_t3_fm_owned_ld_mctp);
+ if (ct3d->dc.num_regions) {
+ cxl_copy_cci_commands(cci, cxl_cmd_set_fm_dcd);
+ }
cci->d = d;
cci->intf = intf;
cxl_init_cci(cci, payload_max);
diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
index f283178d88..d898cfd617 100644
--- a/hw/mem/cxl_type3.c
+++ b/hw/mem/cxl_type3.c
@@ -8,6 +8,7 @@
*
* SPDX-License-Identifier: GPL-v2-only
*/
+#include <math.h>
#include "qemu/osdep.h"
#include "qemu/units.h"
@@ -634,6 +635,8 @@ static bool cxl_create_dc_regions(CXLType3Dev *ct3d, Error **errp)
uint64_t region_len;
uint64_t decode_len;
uint64_t blk_size = 2 * MiB;
+ /* Only 1 block size is supported for now. */
+ uint64_t supported_blk_size_bitmask = blk_size;
CXLDCRegion *region;
MemoryRegion *mr;
uint64_t dc_size;
@@ -679,6 +682,7 @@ static bool cxl_create_dc_regions(CXLType3Dev *ct3d, Error **errp)
.block_size = blk_size,
/* dsmad_handle set when creating CDAT table entries */
.flags = 0,
+ .supported_blk_size_bitmask = supported_blk_size_bitmask,
};
ct3d->dc.total_capacity += region->len;
region->blk_bitmap = bitmap_new(region->len / region->block_size);
--
MST
next prev parent reply other threads:[~2025-07-14 23:30 UTC|newest]
Thread overview: 103+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-14 23:06 [PULL 00/97] virtio,pci,pc: features, fixes, tests Michael S. Tsirkin
2025-07-14 23:06 ` [PULL 01/97] qdev-properties: Add DEFINE_PROP_ON_OFF_AUTO_BIT64() Michael S. Tsirkin
2025-07-14 23:06 ` [PULL 02/97] net/vhost-vdpa: Report hashing capability Michael S. Tsirkin
2025-07-14 23:06 ` [PULL 03/97] virtio-net: Move virtio_net_get_features() down Michael S. Tsirkin
2025-07-14 23:06 ` [PULL 04/97] virtio-net: Retrieve peer hashing capability Michael S. Tsirkin
2025-07-14 23:06 ` [PULL 05/97] net/vhost-vdpa: Remove dummy SetSteeringEBPF Michael S. Tsirkin
2025-07-14 23:06 ` [PULL 06/97] virtio-net: Add hash type options Michael S. Tsirkin
2025-07-14 23:06 ` [PULL 07/97] vhost: Fix used memslot tracking when destroying a vhost device Michael S. Tsirkin
2025-07-14 23:06 ` [PULL 08/97] softmmu/runstate: add a way to detect force shutdowns Michael S. Tsirkin
2025-07-14 23:06 ` [PULL 09/97] vhost: add a helper for force stopping a device Michael S. Tsirkin
2025-07-14 23:06 ` [PULL 10/97] vhost-user-blk: add an option to skip GET_VRING_BASE for force shutdown Michael S. Tsirkin
2025-07-14 23:06 ` [PULL 11/97] tests/acpi: Add empty ACPI data files for LoongArch Michael S. Tsirkin
2025-07-14 23:06 ` [PULL 12/97] tests/qtest/bios-tables-test: Add basic testing " Michael S. Tsirkin
2025-07-14 23:06 ` [PULL 13/97] rebuild-expected-aml.sh: Add support " Michael S. Tsirkin
2025-07-14 23:06 ` [PULL 14/97] tests/acpi: Fill acpi table data " Michael S. Tsirkin
2025-07-14 23:06 ` [PULL 15/97] tests/acpi: Remove stale allowed tables Michael S. Tsirkin
2025-07-14 23:06 ` [PULL 16/97] hw/acpi: Fix GPtrArray memory leak in crs_range_merge Michael S. Tsirkin
2025-07-14 23:06 ` [PULL 17/97] amd_iommu: Fix Miscellaneous Information Register 0 encoding Michael S. Tsirkin
2025-07-14 23:06 ` [PULL 18/97] amd_iommu: Fix Device ID decoding for INVALIDATE_IOTLB_PAGES command Michael S. Tsirkin
2025-07-14 23:07 ` [PULL 19/97] amd_iommu: Update bitmasks representing DTE reserved fields Michael S. Tsirkin
2025-07-14 23:07 ` [PULL 20/97] amd_iommu: Fix masks for various IOMMU MMIO Registers Michael S. Tsirkin
2025-07-14 23:07 ` [PULL 21/97] amd_iommu: Fix mask to retrieve Interrupt Table Root Pointer from DTE Michael S. Tsirkin
2025-07-14 23:07 ` [PULL 22/97] amd_iommu: Fix the calculation for Device Table size Michael S. Tsirkin
2025-07-14 23:07 ` [PULL 23/97] amd_iommu: Remove duplicated definitions Michael S. Tsirkin
2025-07-14 23:07 ` [PULL 24/97] amd_iommu: Fix truncation of oldval in amdvi_writeq Michael S. Tsirkin
2025-07-14 23:07 ` [PULL 25/97] acpi: Add machine option to disable SPCR table Michael S. Tsirkin
2025-07-14 23:07 ` [PULL 26/97] tests/qtest/bios-tables-test: Add test for disabling SPCR on AArch64 Michael S. Tsirkin
2025-07-14 23:07 ` [PULL 27/97] tests/qtest/bios-tables-test: Add test for disabling SPCR on RISC-V Michael S. Tsirkin
2025-07-14 23:07 ` [PULL 28/97] rust: bindings: allow any number of params Michael S. Tsirkin
2025-07-14 23:30 ` Manos Pitsidianakis
2025-07-15 6:17 ` Michael S. Tsirkin
2025-07-15 6:56 ` [PULL v2 " Michael S. Tsirkin
2025-07-14 23:07 ` [PULL 29/97] pci: Add a memory attribute for pre-translated DMA operations Michael S. Tsirkin
2025-07-14 23:07 ` [PULL 30/97] memory: Add permissions in IOMMUAccessFlags Michael S. Tsirkin
2025-07-14 23:07 ` [PULL 31/97] memory: Allow to store the PASID in IOMMUTLBEntry Michael S. Tsirkin
2025-07-14 23:07 ` [PULL 32/97] intel_iommu: Fill the PASID field when creating an IOMMUTLBEntry Michael S. Tsirkin
2025-07-14 23:07 ` [PULL 33/97] intel_iommu: Declare supported PASID size Michael S. Tsirkin
2025-07-14 23:07 ` [PULL 34/97] intel_iommu: Implement vtd_get_iotlb_info from PCIIOMMUOps Michael S. Tsirkin
2025-07-14 23:07 ` [PULL 35/97] intel_iommu: Implement the PCIIOMMUOps callbacks related to invalidations of device-IOTLB Michael S. Tsirkin
2025-07-14 23:07 ` [PULL 36/97] intel_iommu: Return page walk level even when the translation fails Michael S. Tsirkin
2025-07-14 23:07 ` [PULL 37/97] intel_iommu: Set address mask when a translation fails and adjust W permission Michael S. Tsirkin
2025-07-14 23:07 ` [PULL 38/97] intel_iommu: Add support for ATS Michael S. Tsirkin
2025-07-14 23:07 ` [PULL 39/97] target/qmp: Use target_cpu_type() Michael S. Tsirkin
2025-07-14 23:07 ` [PULL 40/97] qemu/target-info: Factor target_arch() out Michael S. Tsirkin
2025-07-14 23:07 ` [PULL 41/97] qemu/target-info: Add %target_arch field to TargetInfo Michael S. Tsirkin
2025-07-14 23:08 ` [PULL 42/97] qemu/target-info: Add target_endian_mode() Michael S. Tsirkin
2025-07-14 23:08 ` [PULL 43/97] qemu: Convert target_words_bigendian() to TargetInfo API Michael S. Tsirkin
2025-07-14 23:08 ` [PULL 44/97] gdbstub/helpers: Replace TARGET_BIG_ENDIAN -> target_big_endian() Michael S. Tsirkin
2025-07-14 23:08 ` [PULL 45/97] qemu: Declare all load/store helper in 'qemu/bswap.h' Michael S. Tsirkin
2025-07-14 23:08 ` [PULL 46/97] hw/virtio: Build various files once Michael S. Tsirkin
2025-07-14 23:08 ` [PULL 47/97] hw/i386/acpi-build: Make aml_pci_device_dsm() static Michael S. Tsirkin
2025-07-14 23:08 ` [PULL 48/97] hw/acpi: Rename and move build_x86_acpi_pci_hotplug to pcihp Michael S. Tsirkin
2025-07-14 23:08 ` [PULL 49/97] hw/pci-host/gpex-acpi: Add native_pci_hotplug arg to acpi_dsdt_add_pci_osc Michael S. Tsirkin
2025-07-14 23:08 ` [PULL 50/97] tests/qtest/bios-tables-test: Prepare for changes in the DSDT table Michael S. Tsirkin
2025-07-14 23:08 ` [PULL 51/97] hw/pci-host/gpex-acpi: Split host bridge OSC and DSM generation Michael S. Tsirkin
2025-07-14 23:08 ` [PULL 52/97] hw/acpi/ged: Add a acpi-pci-hotplug-with-bridge-support property Michael S. Tsirkin
2025-07-14 23:08 ` [PULL 53/97] hw/pci-host/gpex-acpi: Use GED acpi pcihp property Michael S. Tsirkin
2025-07-14 23:08 ` [PULL 54/97] hw/i386/acpi-build: Turn build_q35_osc_method into a generic method Michael S. Tsirkin
2025-07-14 23:08 ` [PULL 55/97] hw/pci-host/gpex-acpi: Use build_pci_host_bridge_osc_method Michael S. Tsirkin
2025-07-14 23:08 ` [PULL 56/97] tests/qtest/bios-tables-test: Update DSDT blobs after GPEX _OSC change Michael S. Tsirkin
2025-07-14 23:08 ` [PULL 57/97] hw/i386/acpi-build: Introduce build_append_pcihp_resources() helper Michael S. Tsirkin
2025-07-14 23:08 ` [PULL 58/97] hw/acpi/pcihp: Add an AmlRegionSpace arg to build_acpi_pci_hotplug Michael S. Tsirkin
2025-07-14 23:08 ` [PULL 59/97] hw/i386/acpi-build: Move build_append_notification_callback to pcihp Michael S. Tsirkin
2025-07-14 23:08 ` [PULL 60/97] hw/i386/acpi-build: Move build_append_pci_bus_devices/pcihp_slots " Michael S. Tsirkin
2025-07-14 23:08 ` [PULL 61/97] hw/i386/acpi-build: Use AcpiPciHpState::root in acpi_set_pci_info Michael S. Tsirkin
2025-07-14 23:08 ` [PULL 62/97] hw/i386/acpi-build: Move aml_pci_edsm to a generic place Michael S. Tsirkin
2025-07-14 23:08 ` [PULL 63/97] qtest/bios-tables-test: Prepare for fixing the aarch64 viot test Michael S. Tsirkin
2025-07-14 23:09 ` [PULL 64/97] qtest/bios-tables-test: Add a variant to " Michael S. Tsirkin
2025-07-14 23:09 ` [PULL 65/97] qtest/bios-tables-test: Generate DSDT.viot Michael S. Tsirkin
2025-07-14 23:09 ` [PULL 66/97] tests/qtest/bios-tables-test: Prepare for changes in the arm virt DSDT table Michael S. Tsirkin
2025-07-14 23:09 ` [PULL 67/97] hw/arm/virt-acpi-build: Let non hotplug ports support static acpi-index Michael S. Tsirkin
2025-07-14 23:09 ` [PULL 68/97] tests/qtest/bios-tables-test: Update ARM DSDT reference blobs Michael S. Tsirkin
2025-07-14 23:09 ` [PULL 69/97] hw/arm/virt-acpi-build: Modify the DSDT ACPI table to enable ACPI PCI hotplug Michael S. Tsirkin
2025-07-14 23:09 ` [PULL 70/97] hw/acpi/ged: Add a bus link property Michael S. Tsirkin
2025-07-14 23:09 ` [PULL 71/97] hw/arm/virt: Pass the bus on the ged creation Michael S. Tsirkin
2025-07-14 23:09 ` [PULL 72/97] hw/acpi/ged: Call pcihp plug callbacks in hotplug handler implementation Michael S. Tsirkin
2025-07-14 23:09 ` [PULL 73/97] hw/acpi/pcihp: Remove root arg in acpi_pcihp_init Michael S. Tsirkin
2025-07-14 23:09 ` [PULL 74/97] hw/acpi/ged: Prepare the device to react to PCI hotplug events Michael S. Tsirkin
2025-07-14 23:09 ` [PULL 75/97] hw/acpi/ged: Support migration of AcpiPciHpState Michael S. Tsirkin
2025-07-14 23:09 ` [PULL 76/97] hw/core/sysbus: Introduce sysbus_mmio_map_name() helper Michael S. Tsirkin
2025-07-14 23:09 ` [PULL 77/97] hw/arm/virt: Minor code reshuffling in create_acpi_ged Michael S. Tsirkin
2025-07-14 23:09 ` [PULL 78/97] hw/arm/virt: Let virt support pci hotplug/unplug GED event Michael S. Tsirkin
2025-07-14 23:09 ` [PULL 79/97] tests/qtest/bios-tables-test: Prepare for addition of acpi pci hp tests Michael S. Tsirkin
2025-07-14 23:09 ` [PULL 80/97] tests/qtest/bios-tables-test: Add aarch64 ACPI PCI hotplug test Michael S. Tsirkin
2025-07-14 23:09 ` [PULL 81/97] qtest/bios-tables-test: Generate reference blob for DSDT.hpoffacpiindex Michael S. Tsirkin
2025-07-14 23:09 ` [PULL 82/97] qtest/bios-tables-test: Generate reference blob for DSDT.acpipcihp Michael S. Tsirkin
2025-07-14 23:09 ` [PULL 83/97] tests: virt: Allow changes to PPTT test table Michael S. Tsirkin
2025-07-14 23:09 ` [PULL 84/97] hw/acpi/aml-build: Set identical implementation flag for PPTT processor nodes Michael S. Tsirkin
2025-07-14 23:09 ` [PULL 85/97] hw/acpi/aml-build: Build a root node in the PPTT table Michael S. Tsirkin
2025-07-14 23:09 ` [PULL 86/97] tests: virt: Update expected ACPI tables for virt test Michael S. Tsirkin
2025-07-14 23:10 ` [PULL 87/97] hw/cxl: fix DC extent capacity tracking Michael S. Tsirkin
2025-07-14 23:10 ` Michael S. Tsirkin [this message]
2025-07-14 23:10 ` [PULL 89/97] hw/mem: cxl_type3: Add dsmas_flags to CXLDCRegion struct Michael S. Tsirkin
2025-07-14 23:10 ` [PULL 90/97] hw/cxl: mailbox-utils: 0x5601 - FMAPI Get Host Region Config Michael S. Tsirkin
2025-07-14 23:10 ` [PULL 91/97] hw/cxl: Move definition for dynamic_capacity_uuid and enum for DC event types to header Michael S. Tsirkin
2025-07-14 23:10 ` [PULL 92/97] hw/mem: cxl_type3: Add DC Region bitmap lock Michael S. Tsirkin
2025-07-14 23:10 ` [PULL 93/97] hw/cxl: mailbox-utils: 0x5602 - FMAPI Set DC Region Config Michael S. Tsirkin
2025-07-14 23:10 ` [PULL 94/97] hw/cxl: mailbox-utils: 0x5603 - FMAPI Get DC Region Extent Lists Michael S. Tsirkin
2025-07-14 23:10 ` [PULL 95/97] hw/cxl: Create helper function to create DC Event Records from extents Michael S. Tsirkin
2025-07-14 23:10 ` [PULL 96/97] hw/cxl: mailbox-utils: 0x5604 - FMAPI Initiate DC Add Michael S. Tsirkin
2025-07-14 23:10 ` [PULL 97/97] hw/cxl: mailbox-utils: 0x5605 - FMAPI Initiate DC Release Michael S. Tsirkin
2025-07-15 6:57 ` [PULL 00/97] virtio,pci,pc: features, fixes, tests Michael S. Tsirkin
2025-07-16 12:39 ` Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=505870dd7a0fd4756319ddfe6e3a4497b1ebf266.1752534227.git.mst@redhat.com \
--to=mst@redhat.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=anisa.su@samsung.com \
--cc=fan.ni@samsung.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).