qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Lucas Meneghel Rodrigues <lmr@redhat.com>
To: Lucas Meneghel Rodrigues <lmr@redhat.com>
Cc: kvm@vger.kernel.org, Marcelo Tosatti <mtosatti@redhat.com>,
	qemu-devel@nongnu.org, Avi Kivity <avi@redhat.com>,
	Paolo Bonzini <pbonzini@redhat.com>,
	Gerd Hoffmann <kraxel@redhat.com>
Subject: Re: [Qemu-devel] [PATCH] hw: Add test device for unittests execution
Date: Thu, 04 Oct 2012 01:24:50 -0300	[thread overview]
Message-ID: <506D0F92.9020108@redhat.com> (raw)
In-Reply-To: <1349322593-10142-1-git-send-email-lmr@redhat.com>

On 10/04/2012 12:49 AM, Lucas Meneghel Rodrigues wrote:
> Add a test device which supports the kvmctl ioports,
> so one can run the KVM unittest suite [1].
>
> Usage:
>
> qemu -device testdev
>
> 1) Removed port 0xf1, since now kvm-unit-tests use
>     serial
>
> 2) Removed exit code port 0xf4, since that can be
>     replaced by
>
> -device isa-debugexit,iobase=0xf4,access-size=2

I forgot to mention that this would work *if* the isa-debugexit device 
gets upstream. Paolo pointed this thread:

http://lists.gnu.org/archive/html/qemu-devel/2012-07/msg00818.html

But it appears that no consensus was reached.

> 3) Removed ram size port 0xd1, since guest memory
>     size can be retrieved from firmware, there's a
>     patch for kvm-unit-tests including an API to
>     retrieve that value.
>
> [1] Preliminary versions of this patch were posted
> to the mailing list about a year ago, I re-read the
> comments of the thread, and had guidance from
> Paolo about which ports to remove from the test
> device.
>
> CC: Paolo Bonzini <pbonzini@redhat.com>
> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
> Signed-off-by: Avi Kivity <avi@redhat.com>
> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
> Signed-off-by: Lucas Meneghel Rodrigues <lmr@redhat.com>
> ---
>   hw/i386/Makefile.objs |   1 +
>   hw/testdev.c          | 131 ++++++++++++++++++++++++++++++++++++++++++++++++++
>   2 files changed, 132 insertions(+)
>   create mode 100644 hw/testdev.c
>
> diff --git a/hw/i386/Makefile.objs b/hw/i386/Makefile.objs
> index 8c764bb..64d2787 100644
> --- a/hw/i386/Makefile.objs
> +++ b/hw/i386/Makefile.objs
> @@ -11,5 +11,6 @@ obj-$(CONFIG_XEN_PCI_PASSTHROUGH) += xen-host-pci-device.o
>   obj-$(CONFIG_XEN_PCI_PASSTHROUGH) += xen_pt.o xen_pt_config_init.o xen_pt_msi.o
>   obj-y += kvm/
>   obj-$(CONFIG_SPICE) += qxl.o qxl-logger.o qxl-render.o
> +obj-y += testdev.o
>
>   obj-y := $(addprefix ../,$(obj-y))
> diff --git a/hw/testdev.c b/hw/testdev.c
> new file mode 100644
> index 0000000..44070f2
> --- /dev/null
> +++ b/hw/testdev.c
> @@ -0,0 +1,131 @@
> +#include <sys/mman.h>
> +#include "hw.h"
> +#include "qdev.h"
> +#include "isa.h"
> +
> +struct testdev {
> +    ISADevice dev;
> +    MemoryRegion iomem;
> +    CharDriverState *chr;
> +};
> +
> +#define TYPE_TESTDEV "testdev"
> +#define TESTDEV(obj) \
> +     OBJECT_CHECK(struct testdev, (obj), TYPE_TESTDEV)
> +
> +static void test_device_irq_line(void *opaque, uint32_t addr, uint32_t data)
> +{
> +    struct testdev *dev = opaque;
> +
> +    qemu_set_irq(isa_get_irq(&dev->dev, addr - 0x2000), !!data);
> +}
> +
> +static uint32 test_device_ioport_data;
> +
> +static void test_device_ioport_write(void *opaque, uint32_t addr, uint32_t data)
> +{
> +    test_device_ioport_data = data;
> +}
> +
> +static uint32_t test_device_ioport_read(void *opaque, uint32_t addr)
> +{
> +    return test_device_ioport_data;
> +}
> +
> +static void test_device_flush_page(void *opaque, uint32_t addr, uint32_t data)
> +{
> +    target_phys_addr_t len = 4096;
> +    void *a = cpu_physical_memory_map(data & ~0xffful, &len, 0);
> +
> +    mprotect(a, 4096, PROT_NONE);
> +    mprotect(a, 4096, PROT_READ|PROT_WRITE);
> +    cpu_physical_memory_unmap(a, len, 0, 0);
> +}
> +
> +static char *iomem_buf;
> +
> +static uint32_t test_iomem_readb(void *opaque, target_phys_addr_t addr)
> +{
> +    return iomem_buf[addr];
> +}
> +
> +static uint32_t test_iomem_readw(void *opaque, target_phys_addr_t addr)
> +{
> +    return *(uint16_t*)(iomem_buf + addr);
> +}
> +
> +static uint32_t test_iomem_readl(void *opaque, target_phys_addr_t addr)
> +{
> +    return *(uint32_t*)(iomem_buf + addr);
> +}
> +
> +static void test_iomem_writeb(void *opaque, target_phys_addr_t addr, uint32_t val)
> +{
> +    iomem_buf[addr] = val;
> +}
> +
> +static void test_iomem_writew(void *opaque, target_phys_addr_t addr, uint32_t val)
> +{
> +    *(uint16_t*)(iomem_buf + addr) = val;
> +}
> +
> +static void test_iomem_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
> +{
> +    *(uint32_t*)(iomem_buf + addr) = val;
> +}
> +
> +static const MemoryRegionOps test_iomem_ops = {
> +    .old_mmio = {
> +        .read = { test_iomem_readb, test_iomem_readw, test_iomem_readl, },
> +        .write = { test_iomem_writeb, test_iomem_writew, test_iomem_writel, },
> +    },
> +    .endianness = DEVICE_LITTLE_ENDIAN,
> +};
> +
> +static int init_test_device(ISADevice *isa)
> +{
> +    struct testdev *dev = DO_UPCAST(struct testdev, dev, isa);
> +
> +    register_ioport_read(0xe0, 1, 1, test_device_ioport_read, dev);
> +    register_ioport_write(0xe0, 1, 1, test_device_ioport_write, dev);
> +    register_ioport_read(0xe0, 1, 2, test_device_ioport_read, dev);
> +    register_ioport_write(0xe0, 1, 2, test_device_ioport_write, dev);
> +    register_ioport_read(0xe0, 1, 4, test_device_ioport_read, dev);
> +    register_ioport_write(0xe0, 1, 4, test_device_ioport_write, dev);
> +    register_ioport_write(0xe4, 1, 4, test_device_flush_page, dev);
> +    register_ioport_write(0x2000, 24, 1, test_device_irq_line, NULL);
> +    iomem_buf = g_malloc0(0x10000);
> +    memory_region_init_io(&dev->iomem, &test_iomem_ops, dev,
> +                          "testdev", 0x10000);
> +    memory_region_add_subregion(isa_address_space(&dev->dev), 0xff000000,
> +                                                  &dev->iomem);
> +    return 0;
> +}
> +
> +static Property testdev_isa_properties[] = {
> +    DEFINE_PROP_CHR("chardev", struct testdev, chr),
> +    DEFINE_PROP_END_OF_LIST(),
> +};
> +
> +static void testdev_class_init(ObjectClass *klass, void *data)
> +{
> +    DeviceClass *dc = DEVICE_CLASS(klass);
> +    ISADeviceClass *k = ISA_DEVICE_CLASS(klass);
> +
> +    k->init = init_test_device;
> +    dc->props = testdev_isa_properties;
> +}
> +
> +static TypeInfo testdev_info = {
> +    .name           = "testdev",
> +    .parent         = TYPE_ISA_DEVICE,
> +    .instance_size  = sizeof(struct testdev),
> +    .class_init     = testdev_class_init,
> +};
> +
> +static void testdev_register_types(void)
> +{
> +    type_register_static(&testdev_info);
> +}
> +
> +type_init(testdev_register_types)
>

  reply	other threads:[~2012-10-04  4:24 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-04  3:49 [Qemu-devel] [PATCH] hw: Add test device for unittests execution Lucas Meneghel Rodrigues
2012-10-04  4:24 ` Lucas Meneghel Rodrigues [this message]
2012-10-04  7:18 ` Paolo Bonzini
2012-10-04  8:02 ` Peter Maydell
2012-10-04  8:04   ` Paolo Bonzini
  -- strict thread matches above, loose matches on Subject: below --
2011-08-26 20:04 Lucas Meneghel Rodrigues
2011-08-26 21:22 ` Anthony Liguori
2011-08-27 10:07   ` Edgar E. Iglesias
2011-08-27 16:44     ` Blue Swirl
2011-08-29  5:50     ` Avi Kivity
2011-08-29  5:47   ` Avi Kivity
2011-08-29 13:58   ` Lucas Meneghel Rodrigues
2011-08-26 22:26 ` Jan Kiszka
2011-08-29  5:52   ` Avi Kivity
2011-08-27 16:22 ` Blue Swirl
2011-08-29  5:57   ` Avi Kivity
2011-08-30 19:11     ` Blue Swirl
2011-08-30 19:36       ` Lluís
2011-08-30 19:54         ` Blue Swirl
2011-08-30 20:20           ` Lluís

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=506D0F92.9020108@redhat.com \
    --to=lmr@redhat.com \
    --cc=avi@redhat.com \
    --cc=kraxel@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=mtosatti@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).