[Qemu-devel] [PATCH 3/7] serial: add windows inf file for the pci card to docs

[Qemu-devel] [PATCH 3/7] serial: add windows inf file for the pci card to docs

[Gerd Hoffmann]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
 docs/qemupciserial.inf |  107 ++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 107 insertions(+), 0 deletions(-)
 create mode 100644 docs/qemupciserial.inf

diff --git a/docs/qemupciserial.inf b/docs/qemupciserial.inf
new file mode 100644
index 0000000..c7cea99
--- /dev/null
+++ b/docs/qemupciserial.inf
@@ -0,0 +1,107 @@
+; qemupciserial.inf for QEMU, based on MSPORTS.INF
+
+; The driver itself is shipped with Windows (serial.sys).  This is
+; just a inf file to tell windows which pci id the serial pci card
+; emulated by qemu has, and to apply a name tag to it which windows
+; will show in the device manager.
+
+; Installing the driver: Go to device manager.  You should find a "pci
+; serial card" tagged with a yellow question mark.  Open properties.
+; Pick "update driver".  Then "select driver manually".  Pick "Ports
+; (Com+Lpt)" from the list.  Click "Have a disk".  Select this file.
+; Procedure may vary a bit depending on the windows version.
+
+[Version]
+Signature="$CHICAGO$"
+Class=Ports
+ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
+Provider=%QEMU%
+DriverVer=09/24/2012,1.3.0
+
+[SourceDisksNames]
+3426=windows cd
+
+[SourceDisksFiles]
+serial.sys 		= 3426
+serenum.sys 		= 3426
+
+[DestinationDirs]
+DefaultDestDir  = 11        ;LDID_SYS
+ComPort.NT.Copy = 12        ;DIRID_DRIVERS
+SerialEnumerator.NT.Copy=12 ;DIRID_DRIVERS
+
+; Drivers
+;----------------------------------------------------------
+[Manufacturer]
+%QEMU%=QEMU,NTx86
+
+[QEMU.NTx86]
+%QEMU-PCI_SERIAL.DeviceDesc% = ComPort, "PCI\VEN_1b36&DEV_0002&CC_0700"
+
+; COM sections
+;----------------------------------------------------------
+[ComPort.AddReg]
+HKR,,PortSubClass,1,01
+
+[ComPort.NT]
+AddReg=ComPort.AddReg, ComPort.NT.AddReg
+LogConfig=caa
+SyssetupPnPFlags = 1
+
+[ComPort.NT.HW]
+AddReg=ComPort.NT.HW.AddReg
+
+[ComPort.NT.AddReg]
+HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
+
+[ComPort.NT.HW.AddReg]
+HKR,,"UpperFilters",0x00010000,"serenum"
+
+;-------------- Service installation
+; Port Driver (function driver for this device)
+[ComPort.NT.Services]
+AddService = Serial, 0x00000002, Serial_Service_Inst, Serial_EventLog_Inst
+AddService = Serenum,,Serenum_Service_Inst
+
+; -------------- Serial Port Driver install sections
+[Serial_Service_Inst]
+DisplayName    = %Serial.SVCDESC%
+ServiceType    = 1               ; SERVICE_KERNEL_DRIVER
+StartType      = 1               ; SERVICE_SYSTEM_START (this driver may do detection)
+ErrorControl   = 0               ; SERVICE_ERROR_IGNORE
+ServiceBinary  = %12%\serial.sys
+LoadOrderGroup = Extended base
+
+; -------------- Serenum Driver install section
+[Serenum_Service_Inst]
+DisplayName    = %Serenum.SVCDESC%
+ServiceType    = 1               ; SERVICE_KERNEL_DRIVER
+StartType      = 3               ; SERVICE_DEMAND_START
+ErrorControl   = 1               ; SERVICE_ERROR_NORMAL
+ServiceBinary  = %12%\serenum.sys
+LoadOrderGroup = PNP Filter
+
+[Serial_EventLog_Inst]
+AddReg = Serial_EventLog_AddReg
+
+[Serial_EventLog_AddReg]
+HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\serial.sys"
+HKR,,TypesSupported,0x00010001,7
+
+; The following sections are COM port resource configs.
+; Section name format means:
+; Char 1 = c (COM port)
+; Char 2 = I/O config: 1 (3f8), 2 (2f8), 3 (3e8), 4 (2e8), a (any)
+; Char 3 = IRQ config: #, a (any)
+
+[caa]                   ; Any base, any IRQ
+ConfigPriority=HARDRECONFIG
+IOConfig=8@100-ffff%fff8(3ff::)
+IRQConfig=S:3,4,5,7,9,10,11,12,14,15
+
+[Strings]
+QEMU="QEMU"
+QEMU-PCI_SERIAL.DeviceDesc="QEMU Serial PCI Card"
+
+Serial.SVCDESC   = "Serial port driver"
+Serenum.SVCDESC = "Serenum Filter Driver"
-- 
1.7.1

[Qemu-devel] [PATCH 3/7] serial: add windows inf file for the pci card to docs

[Gerd Hoffmann]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
 docs/qemupciserial.inf |  109 ++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 109 insertions(+), 0 deletions(-)
 create mode 100644 docs/qemupciserial.inf

diff --git a/docs/qemupciserial.inf b/docs/qemupciserial.inf
new file mode 100644
index 0000000..3474310
--- /dev/null
+++ b/docs/qemupciserial.inf
@@ -0,0 +1,109 @@
+; qemupciserial.inf for QEMU, based on MSPORTS.INF
+
+; The driver itself is shipped with Windows (serial.sys).  This is
+; just a inf file to tell windows which pci id the serial pci card
+; emulated by qemu has, and to apply a name tag to it which windows
+; will show in the device manager.
+
+; Installing the driver: Go to device manager.  You should find a "pci
+; serial card" tagged with a yellow question mark.  Open properties.
+; Pick "update driver".  Then "select driver manually".  Pick "Ports
+; (Com+Lpt)" from the list.  Click "Have a disk".  Select this file.
+; Procedure may vary a bit depending on the windows version.
+
+; FIXME: This file covers the single port version only.
+
+[Version]
+Signature="$CHICAGO$"
+Class=Ports
+ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
+Provider=%QEMU%
+DriverVer=09/24/2012,1.3.0
+
+[SourceDisksNames]
+3426=windows cd
+
+[SourceDisksFiles]
+serial.sys 		= 3426
+serenum.sys 		= 3426
+
+[DestinationDirs]
+DefaultDestDir  = 11        ;LDID_SYS
+ComPort.NT.Copy = 12        ;DIRID_DRIVERS
+SerialEnumerator.NT.Copy=12 ;DIRID_DRIVERS
+
+; Drivers
+;----------------------------------------------------------
+[Manufacturer]
+%QEMU%=QEMU,NTx86
+
+[QEMU.NTx86]
+%QEMU-PCI_SERIAL.DeviceDesc% = ComPort, "PCI\VEN_1b36&DEV_0002&CC_0700"
+
+; COM sections
+;----------------------------------------------------------
+[ComPort.AddReg]
+HKR,,PortSubClass,1,01
+
+[ComPort.NT]
+AddReg=ComPort.AddReg, ComPort.NT.AddReg
+LogConfig=caa
+SyssetupPnPFlags = 1
+
+[ComPort.NT.HW]
+AddReg=ComPort.NT.HW.AddReg
+
+[ComPort.NT.AddReg]
+HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
+
+[ComPort.NT.HW.AddReg]
+HKR,,"UpperFilters",0x00010000,"serenum"
+
+;-------------- Service installation
+; Port Driver (function driver for this device)
+[ComPort.NT.Services]
+AddService = Serial, 0x00000002, Serial_Service_Inst, Serial_EventLog_Inst
+AddService = Serenum,,Serenum_Service_Inst
+
+; -------------- Serial Port Driver install sections
+[Serial_Service_Inst]
+DisplayName    = %Serial.SVCDESC%
+ServiceType    = 1               ; SERVICE_KERNEL_DRIVER
+StartType      = 1               ; SERVICE_SYSTEM_START (this driver may do detection)
+ErrorControl   = 0               ; SERVICE_ERROR_IGNORE
+ServiceBinary  = %12%\serial.sys
+LoadOrderGroup = Extended base
+
+; -------------- Serenum Driver install section
+[Serenum_Service_Inst]
+DisplayName    = %Serenum.SVCDESC%
+ServiceType    = 1               ; SERVICE_KERNEL_DRIVER
+StartType      = 3               ; SERVICE_DEMAND_START
+ErrorControl   = 1               ; SERVICE_ERROR_NORMAL
+ServiceBinary  = %12%\serenum.sys
+LoadOrderGroup = PNP Filter
+
+[Serial_EventLog_Inst]
+AddReg = Serial_EventLog_AddReg
+
+[Serial_EventLog_AddReg]
+HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\serial.sys"
+HKR,,TypesSupported,0x00010001,7
+
+; The following sections are COM port resource configs.
+; Section name format means:
+; Char 1 = c (COM port)
+; Char 2 = I/O config: 1 (3f8), 2 (2f8), 3 (3e8), 4 (2e8), a (any)
+; Char 3 = IRQ config: #, a (any)
+
+[caa]                   ; Any base, any IRQ
+ConfigPriority=HARDRECONFIG
+IOConfig=8@100-ffff%fff8(3ff::)
+IRQConfig=S:3,4,5,7,9,10,11,12,14,15
+
+[Strings]
+QEMU="QEMU"
+QEMU-PCI_SERIAL.DeviceDesc="QEMU Serial PCI Card"
+
+Serial.SVCDESC   = "Serial port driver"
+Serenum.SVCDESC = "Serenum Filter Driver"
-- 
1.7.1

[Qemu-devel] [PATCH 3/7] serial: add windows inf file for the pci card to docs

[Hervé Poussineau]

 > Signed-off-by: Gerd Hoffmann <address@hidden>

> ---
>  docs/qemupciserial.inf |  109 ++++++++++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 109 insertions(+), 0 deletions(-)
> create mode 100644 docs/qemupciserial.inf
[...]

Did you try to add emulation of a PCI serial card natively recognized by Windows XP (at least),
like SIIG CyberSerial card?
Available models described in msports.inf are vendorId 131F, deviceId 1000, subsystem 00000000, revision 2, or with vendorId 131F, deviceId 2000, class code 0700)

Regards,

Hervé

Re: [Qemu-devel] [PATCH 3/7] serial: add windows inf file for the pci card to docs

[Gerd Hoffmann]

On 10/17/12 22:12, Hervé Poussineau wrote:
>> Signed-off-by: Gerd Hoffmann <address@hidden>
> 
>> ---
>>  docs/qemupciserial.inf |  109
>> ++++++++++++++++++++++++++++++++++++++++++++++++
>> 1 files changed, 109 insertions(+), 0 deletions(-)
>> create mode 100644 docs/qemupciserial.inf
> [...]
> 
> Did you try to add emulation of a PCI serial card natively recognized by
> Windows XP (at least),
> like SIIG CyberSerial card?

Thats the only one.  Looked at the linux code for it, a comment mumbled
something about a eeprom holding card configuration, /me figured I
better don't go that route.  If it would have been a simple card with
just a 16550 & nothing else I would have picked it.

cheers,
  Gerd