From: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
To: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: KVM <kvm@vger.kernel.org>, Jan Kiszka <jan.kiszka@siemens.com>,
Marcelo Tosatti <mtosatti@redhat.com>,
qemu-devel@nongnu.org, Kevin O'Connor <kevin@koconnor.net>,
Avi Kivity <avi@redhat.com>,
Anthony Liguori <anthony@codemonkey.ws>,
Liu Sheng <liusheng@linux.vnet.ibm.com>
Subject: [Qemu-devel] [PATCH v2 2/5] Qemu: update header files
Date: Thu, 25 Oct 2012 17:21:42 +0800 [thread overview]
Message-ID: <508904A6.2040706@linux.vnet.ibm.com> (raw)
In-Reply-To: <50890462.5010307@linux.vnet.ibm.com>
Sync the header files by using scripts/update-linux-headers.sh
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
---
| 59 ++++++++++++++++++++++++++++++++++
| 7 ++--
| 17 ++++++++++
| 41 ++++++++++++++++++-----
4 files changed, 112 insertions(+), 12 deletions(-)
--git a/linux-headers/asm-powerpc/kvm.h b/linux-headers/asm-powerpc/kvm.h
index 1bea4d8..b89ae4d 100644
--- a/linux-headers/asm-powerpc/kvm.h
+++ b/linux-headers/asm-powerpc/kvm.h
@@ -221,6 +221,12 @@ struct kvm_sregs {
__u32 dbsr; /* KVM_SREGS_E_UPDATE_DBSR */
__u32 dbcr[3];
+ /*
+ * iac/dac registers are 64bit wide, while this API
+ * interface provides only lower 32 bits on 64 bit
+ * processors. ONE_REG interface is added for 64bit
+ * iac/dac registers.
+ */
__u32 iac[4];
__u32 dac[2];
__u32 dvc[2];
@@ -326,5 +332,58 @@ struct kvm_book3e_206_tlb_params {
};
#define KVM_REG_PPC_HIOR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x1)
+#define KVM_REG_PPC_IAC1 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x2)
+#define KVM_REG_PPC_IAC2 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x3)
+#define KVM_REG_PPC_IAC3 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x4)
+#define KVM_REG_PPC_IAC4 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x5)
+#define KVM_REG_PPC_DAC1 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x6)
+#define KVM_REG_PPC_DAC2 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x7)
+#define KVM_REG_PPC_DABR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x8)
+#define KVM_REG_PPC_DSCR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x9)
+#define KVM_REG_PPC_PURR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xa)
+#define KVM_REG_PPC_SPURR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xb)
+#define KVM_REG_PPC_DAR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xc)
+#define KVM_REG_PPC_DSISR (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0xd)
+#define KVM_REG_PPC_AMR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xe)
+#define KVM_REG_PPC_UAMOR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xf)
+
+#define KVM_REG_PPC_MMCR0 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x10)
+#define KVM_REG_PPC_MMCR1 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x11)
+#define KVM_REG_PPC_MMCRA (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x12)
+
+#define KVM_REG_PPC_PMC1 (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x18)
+#define KVM_REG_PPC_PMC2 (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x19)
+#define KVM_REG_PPC_PMC3 (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x1a)
+#define KVM_REG_PPC_PMC4 (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x1b)
+#define KVM_REG_PPC_PMC5 (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x1c)
+#define KVM_REG_PPC_PMC6 (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x1d)
+#define KVM_REG_PPC_PMC7 (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x1e)
+#define KVM_REG_PPC_PMC8 (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x1f)
+
+/* 32 floating-point registers */
+#define KVM_REG_PPC_FPR0 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x20)
+#define KVM_REG_PPC_FPR(n) (KVM_REG_PPC_FPR0 + (n))
+#define KVM_REG_PPC_FPR31 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x3f)
+
+/* 32 VMX/Altivec vector registers */
+#define KVM_REG_PPC_VR0 (KVM_REG_PPC | KVM_REG_SIZE_U128 | 0x40)
+#define KVM_REG_PPC_VR(n) (KVM_REG_PPC_VR0 + (n))
+#define KVM_REG_PPC_VR31 (KVM_REG_PPC | KVM_REG_SIZE_U128 | 0x5f)
+
+/* 32 double-width FP registers for VSX */
+/* High-order halves overlap with FP regs */
+#define KVM_REG_PPC_VSR0 (KVM_REG_PPC | KVM_REG_SIZE_U128 | 0x60)
+#define KVM_REG_PPC_VSR(n) (KVM_REG_PPC_VSR0 + (n))
+#define KVM_REG_PPC_VSR31 (KVM_REG_PPC | KVM_REG_SIZE_U128 | 0x7f)
+
+/* FP and vector status/control registers */
+#define KVM_REG_PPC_FPSCR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x80)
+#define KVM_REG_PPC_VSCR (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0x81)
+
+/* Virtual processor areas */
+/* For SLB & DTL, address in high (first) half, length in low half */
+#define KVM_REG_PPC_VPA_ADDR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x82)
+#define KVM_REG_PPC_VPA_SLB (KVM_REG_PPC | KVM_REG_SIZE_U128 | 0x83)
+#define KVM_REG_PPC_VPA_DTL (KVM_REG_PPC | KVM_REG_SIZE_U128 | 0x84)
#endif /* __LINUX_KVM_POWERPC_H */
--git a/linux-headers/asm-powerpc/kvm_para.h b/linux-headers/asm-powerpc/kvm_para.h
index c047a84..7e64f57 100644
--- a/linux-headers/asm-powerpc/kvm_para.h
+++ b/linux-headers/asm-powerpc/kvm_para.h
@@ -75,9 +75,10 @@ struct kvm_vcpu_arch_shared {
};
#define KVM_SC_MAGIC_R0 0x4b564d21 /* "KVM!" */
-#define HC_VENDOR_KVM (42 << 16)
-#define HC_EV_SUCCESS 0
-#define HC_EV_UNIMPLEMENTED 12
+
+#define KVM_HCALL_TOKEN(num) _EV_HCALL_TOKEN(EV_KVM_VENDOR_ID, num)
+
+#include <asm/epapr_hcalls.h>
#define KVM_FEATURE_MAGIC_PAGE 1
--git a/linux-headers/asm-x86/kvm.h b/linux-headers/asm-x86/kvm.h
index 246617e..a65ec29 100644
--- a/linux-headers/asm-x86/kvm.h
+++ b/linux-headers/asm-x86/kvm.h
@@ -9,6 +9,22 @@
#include <linux/types.h>
#include <linux/ioctl.h>
+#define DE_VECTOR 0
+#define DB_VECTOR 1
+#define BP_VECTOR 3
+#define OF_VECTOR 4
+#define BR_VECTOR 5
+#define UD_VECTOR 6
+#define NM_VECTOR 7
+#define DF_VECTOR 8
+#define TS_VECTOR 10
+#define NP_VECTOR 11
+#define SS_VECTOR 12
+#define GP_VECTOR 13
+#define PF_VECTOR 14
+#define MF_VECTOR 16
+#define MC_VECTOR 18
+
/* Select x86 specific features in <linux/kvm.h> */
#define __KVM_HAVE_PIT
#define __KVM_HAVE_IOAPIC
@@ -25,6 +41,7 @@
#define __KVM_HAVE_DEBUGREGS
#define __KVM_HAVE_XSAVE
#define __KVM_HAVE_XCRS
+#define __KVM_HAVE_READONLY_MEM
/* Architectural interrupt line count. */
#define KVM_NR_INTERRUPTS 256
--git a/linux-headers/linux/kvm.h b/linux-headers/linux/kvm.h
index 4b9e575..d3487e8 100644
--- a/linux-headers/linux/kvm.h
+++ b/linux-headers/linux/kvm.h
@@ -101,9 +101,13 @@ struct kvm_userspace_memory_region {
__u64 userspace_addr; /* start of the userspace allocated memory */
};
-/* for kvm_memory_region::flags */
-#define KVM_MEM_LOG_DIRTY_PAGES 1UL
-#define KVM_MEMSLOT_INVALID (1UL << 1)
+/*
+ * The bit 0 ~ bit 15 of kvm_memory_region::flags are visible for userspace,
+ * other bits are reserved for kvm internal use which are defined in
+ * include/linux/kvm_host.h.
+ */
+#define KVM_MEM_LOG_DIRTY_PAGES (1UL << 0)
+#define KVM_MEM_READONLY (1UL << 1)
/* for KVM_IRQ_LINE */
struct kvm_irq_level {
@@ -163,10 +167,15 @@ struct kvm_pit_config {
#define KVM_EXIT_OSI 18
#define KVM_EXIT_PAPR_HCALL 19
#define KVM_EXIT_S390_UCONTROL 20
+#define KVM_EXIT_WATCHDOG 21
/* For KVM_EXIT_INTERNAL_ERROR */
-#define KVM_INTERNAL_ERROR_EMULATION 1
-#define KVM_INTERNAL_ERROR_SIMUL_EX 2
+/* Emulate instruction failed. */
+#define KVM_INTERNAL_ERROR_EMULATION 1
+/* Encounter unexpected simultaneous exceptions. */
+#define KVM_INTERNAL_ERROR_SIMUL_EX 2
+/* Encounter unexpected vm-exit due to delivery event. */
+#define KVM_INTERNAL_ERROR_DELIVERY_EV 3
/* for KVM_RUN, returned by mmap(vcpu_fd, offset=0) */
struct kvm_run {
@@ -473,6 +482,8 @@ struct kvm_ppc_smmu_info {
struct kvm_ppc_one_seg_page_size sps[KVM_PPC_PAGE_SIZES_MAX_SZ];
};
+#define KVM_PPC_PVINFO_FLAGS_EV_IDLE (1<<0)
+
#define KVMIO 0xAE
/* machine type bits, to be used as argument to KVM_CREATE_VM */
@@ -618,6 +629,9 @@ struct kvm_ppc_smmu_info {
#define KVM_CAP_PPC_GET_SMMU_INFO 78
#define KVM_CAP_S390_COW 79
#define KVM_CAP_PPC_ALLOC_HTAB 80
+#define KVM_CAP_READONLY_MEM 81
+#define KVM_CAP_IRQFD_RESAMPLE 82
+#define KVM_CAP_PPC_BOOKE_WATCHDOG 83
#ifdef KVM_CAP_IRQ_ROUTING
@@ -683,12 +697,21 @@ struct kvm_xen_hvm_config {
#endif
#define KVM_IRQFD_FLAG_DEASSIGN (1 << 0)
+/*
+ * Available with KVM_CAP_IRQFD_RESAMPLE
+ *
+ * KVM_IRQFD_FLAG_RESAMPLE indicates resamplefd is valid and specifies
+ * the irqfd to operate in resampling mode for level triggered interrupt
+ * emlation. See Documentation/virtual/kvm/api.txt.
+ */
+#define KVM_IRQFD_FLAG_RESAMPLE (1 << 1)
struct kvm_irqfd {
__u32 fd;
__u32 gsi;
__u32 flags;
- __u8 pad[20];
+ __u32 resamplefd;
+ __u8 pad[16];
};
struct kvm_clock_data {
@@ -831,6 +854,9 @@ struct kvm_s390_ucas_mapping {
#define KVM_PPC_GET_SMMU_INFO _IOR(KVMIO, 0xa6, struct kvm_ppc_smmu_info)
/* Available with KVM_CAP_PPC_ALLOC_HTAB */
#define KVM_PPC_ALLOCATE_HTAB _IOWR(KVMIO, 0xa7, __u32)
+#define KVM_CREATE_SPAPR_TCE _IOW(KVMIO, 0xa8, struct kvm_create_spapr_tce)
+/* Available with KVM_CAP_RMA */
+#define KVM_ALLOCATE_RMA _IOR(KVMIO, 0xa9, struct kvm_allocate_rma)
/*
* ioctls for vcpu fds
@@ -894,9 +920,6 @@ struct kvm_s390_ucas_mapping {
/* Available with KVM_CAP_XCRS */
#define KVM_GET_XCRS _IOR(KVMIO, 0xa6, struct kvm_xcrs)
#define KVM_SET_XCRS _IOW(KVMIO, 0xa7, struct kvm_xcrs)
-#define KVM_CREATE_SPAPR_TCE _IOW(KVMIO, 0xa8, struct kvm_create_spapr_tce)
-/* Available with KVM_CAP_RMA */
-#define KVM_ALLOCATE_RMA _IOR(KVMIO, 0xa9, struct kvm_allocate_rma)
/* Available with KVM_CAP_SW_TLB */
#define KVM_DIRTY_TLB _IOW(KVMIO, 0xaa, struct kvm_dirty_tlb)
/* Available with KVM_CAP_ONE_REG */
--
1.7.7.6
next prev parent reply other threads:[~2012-10-25 10:45 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-25 9:20 [Qemu-devel] [PATCH v2 0/5] Qemu: implement readonly memory Xiao Guangrong
2012-10-25 9:21 ` [Qemu-devel] [PATCH v2 1/5] KVM: define KVM_CAP_READONLY_MEM unconditionally Xiao Guangrong
2012-10-25 12:14 ` Jan Kiszka
2012-10-25 9:21 ` Xiao Guangrong [this message]
2012-10-25 11:03 ` [Qemu-devel] [PATCH v2 2/5] Qemu: update header files Peter Maydell
2012-10-25 9:22 ` [Qemu-devel] [PATCH v2 3/5] Qemu: do not mark bios readonly Xiao Guangrong
2012-10-26 10:35 ` Jan Kiszka
2012-10-29 7:09 ` Xiao Guangrong
2012-10-29 7:44 ` Jan Kiszka
2012-10-29 8:31 ` Xiao Guangrong
2012-10-31 6:03 ` Jan Kiszka
2012-10-31 6:35 ` Xiao Guangrong
2012-10-31 6:46 ` Jan Kiszka
2012-10-31 7:01 ` Xiao Guangrong
2012-10-31 7:21 ` Jan Kiszka
2012-10-25 9:22 ` [Qemu-devel] [PATCH v2 4/5] Qemu: implement readonly memory Xiao Guangrong
2012-10-25 9:23 ` [Qemu-devel] [PATCH v2 5/5] Qemu: mark pci rom readonly Xiao Guangrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=508904A6.2040706@linux.vnet.ibm.com \
--to=xiaoguangrong@linux.vnet.ibm.com \
--cc=anthony@codemonkey.ws \
--cc=avi@redhat.com \
--cc=jan.kiszka@siemens.com \
--cc=kevin@koconnor.net \
--cc=kvm@vger.kernel.org \
--cc=liusheng@linux.vnet.ibm.com \
--cc=mtosatti@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).