From: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
To: Josh Durgin <josh.durgin@inktank.com>
Cc: "ceph-devel@vger.kernel.org" <ceph-devel@vger.kernel.org>,
qemu-devel <qemu-devel@nongnu.org>
Subject: Re: [Qemu-devel] RBD trim / unmap support?
Date: Fri, 02 Nov 2012 15:18:45 +0100 [thread overview]
Message-ID: <5093D645.8070906@profihost.ag> (raw)
In-Reply-To: <50938DA0.6090205@profihost.ag>
Hello qemu list,
i cc you as i'm not sure where the problem is.
When i use scsi-hd with discard_granularity the discard works fine on
target size but the client print these - immediatly after sending
discard / trim commands with mkfs.btrfs.
> [ 75.076895] sd 2:0:0:4: [sdc]
> [ 75.078353] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
> [ 75.079377] sd 2:0:0:4: [sdc]
> [ 75.080410] Sense Key : Aborted Command [current]
> [ 75.081446] sd 2:0:0:4: [sdc]
> [ 75.082459] Add. Sense: I/O process terminated
> [ 75.083466] sd 2:0:0:4: [sdc] CDB:
> [ 75.084473] Write same(16): 93 08 00 00 00 00 00 00 00 00 00 7f ff ff
> 00 00
> [ 75.085535] end_request: I/O error, dev sdc, sector 0
> [ 75.086567] sd 2:0:0:4: [sdc]
> [ 75.087569] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
> [ 75.088605] sd 2:0:0:4: [sdc]
> [ 75.089610] Sense Key : Aborted Command [current]
> [ 75.090630] sd 2:0:0:4: [sdc]
> [ 75.091631] Add. Sense: I/O process terminated
> [ 75.092621] sd 2:0:0:4: [sdc] CDB:
> [ 75.093579] Write same(16): 93 08 00 00 00 00 00 7f ff ff 00 7f ff ff
> 00 00
> [ 75.094581] end_request: I/O error, dev sdc, sector 8388607
> [ 75.095558] sd 2:0:0:4: [sdc]
> [ 75.096561] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
> [ 75.097553] sd 2:0:0:4: [sdc]
> [ 75.098520] Sense Key : Aborted Command [current]
> [ 75.099484] sd 2:0:0:4: [sdc]
> [ 75.100471] Add. Sense: I/O process terminated
> [ 75.101439] sd 2:0:0:4: [sdc] CDB:
> [ 75.102432] Write same(16): 93 08 00 00 00 00 00 ff ff fe 00 7f ff ff
> 00 00
> [ 75.103464] end_request: I/O error, dev sdc, sector 16777214
> [ 75.104503] sd 2:0:0:4: [sdc]
> [ 75.105507] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
> [ 75.106514] sd 2:0:0:4: [sdc]
> [ 75.107525] Sense Key : Aborted Command [current]
> [ 75.108545] sd 2:0:0:4: [sdc]
> [ 75.109525] Add. Sense: I/O process terminated
> [ 75.110487] sd 2:0:0:4: [sdc] CDB:
> [ 75.111418] Write same(16): 93 08 00 00 00 00 01 7f ff fd 00 7f ff ff
> 00 00
> [ 75.112419] end_request: I/O error, dev sdc, sector 25165821
> [ 75.238627] sd 2:0:0:4: [sdc]
> [ 75.239946] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
> [ 75.241197] sd 2:0:0:4: [sdc]
> [ 75.242097] Sense Key : Aborted Command [current]
> [ 75.242627] sd 2:0:0:4: [sdc]
> [ 75.242627] Add. Sense: I/O process terminated
> [ 75.242627] sd 2:0:0:4: [sdc] CDB:
> [ 75.242627] Write same(16): 93 08 00 00 00 00 01 ff ff fc 00 7f ff ff
> 00 00
> [ 75.242627] end_request: I/O error, dev sdc, sector 33554428
> [ 75.447311] sd 2:0:0:4: [sdc]
> [ 75.448505] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
> [ 75.449392] sd 2:0:0:4: [sdc]
> [ 75.450262] Sense Key : Aborted Command [current]
> [ 75.451134] sd 2:0:0:4: [sdc]
> [ 75.451312] Add. Sense: I/O process terminated
> [ 75.451312] sd 2:0:0:4: [sdc] CDB:
> [ 75.451312] Write same(16): 93 08 00 00 00 00 02 7f ff fb 00 7f ff ff
> 00 00
> [ 75.451312] end_request: I/O error, dev sdc, sector 41943035
> [ 75.476364] sd 2:0:0:4: [sdc]
> [ 75.477252] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
> [ 75.478135] sd 2:0:0:4: [sdc]
> [ 75.479004] Sense Key : Aborted Command [current]
> [ 75.479891] sd 2:0:0:4: [sdc]
> [ 75.480358] Add. Sense: I/O process terminated
> [ 75.480358] sd 2:0:0:4: [sdc] CDB:
> [ 75.480358] Write same(16): 93 08 00 00 00 00 02 ff ff fa 00 7f ff ff
> 00 00
> [ 75.480358] end_request: I/O error, dev sdc, sector 50331642
> [ 75.496374] sd 2:0:0:4: [sdc]
> [ 75.497202] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
> [ 75.498077] sd 2:0:0:4: [sdc]
> [ 75.498948] Sense Key : Aborted Command [current]
> [ 75.499818] sd 2:0:0:4: [sdc]
> [ 75.500374] Add. Sense: I/O process terminated
> [ 75.500374] sd 2:0:0:4: [sdc] CDB:
> [ 75.500374] Write same(16): 93 08 00 00 00 00 03 7f ff f9 00 7f ff ff
> 00 00
> [ 75.500374] end_request: I/O error, dev sdc, sector 58720249
>
> Stefan
>
> Am 02.11.2012 09:20, schrieb Stefan Priebe - Profihost AG:
>> Am 02.11.2012 00:36, schrieb Josh Durgin:
>>> On 11/01/2012 04:33 PM, Stefan Priebe wrote:
>>>> Hello list,
>>>>
>>>> does rbd support trim / unmap? Or is it planned to support it?
>>>>
>>>> Greets,
>>>> Stefan
>>>
>>> librbd (and thus qemu) support it. The rbd kernel module does not yet.
>>> See http://ceph.com/docs/master/rbd/qemu-rbd/#enabling-discard-trim
>>
>> Thanks! Is there any recommanded value for discard_granularity? With
>> fstrim and iscsi i use 128kb.
>>
>> Stefan
parent reply other threads:[~2012-11-02 14:19 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <50938DA0.6090205@profihost.ag>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5093D645.8070906@profihost.ag \
--to=s.priebe@profihost.ag \
--cc=ceph-devel@vger.kernel.org \
--cc=josh.durgin@inktank.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).