qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: Peter Lieven <pl@kamp.de>
Cc: Kevin Wolf <kwolf@redhat.com>,
	ronniesahlberg@gmail.com, qemu-devel@nongnu.org,
	Stefan Hajnoczi <stefanha@redhat.com>
Subject: Re: [Qemu-devel] [PATCH 3/8] iscsi: add bdrv_co_write_zeroes
Date: Mon, 24 Jun 2013 16:34:44 +0200	[thread overview]
Message-ID: <51C85904.50903@redhat.com> (raw)
In-Reply-To: <1371934712-11714-4-git-send-email-pl@kamp.de>

Il 22/06/2013 22:58, Peter Lieven ha scritto:
> write zeroes is emulated by unmap if the
> target supports unmapping an unmapped blocks
> read as zero.

I think you should check BDRV_O_UNMAP in bs->open_flags, and not do this
optimization if it is not set.

Paolo

> Signed-off-by: Peter Lieven <pl@kamp.de>
> ---
>  block/iscsi.c |   63 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 63 insertions(+)
> 
> diff --git a/block/iscsi.c b/block/iscsi.c
> index 98be71e..683692a 100644
> --- a/block/iscsi.c
> +++ b/block/iscsi.c
> @@ -906,6 +906,68 @@ static int coroutine_fn iscsi_co_is_allocated(BlockDriverState *bs,
>      return ret;
>  }
>  
> +static void
> +iscsi_co_write_zeroes_cb(struct iscsi_context *iscsi, int status,
> +                         void *command_data, void *opaque)
> +{
> +    struct IscsiTask *iTask = opaque;
> +    struct scsi_task *task = command_data;
> +
> +    iTask->complete = 1;
> +    iTask->status   = 0;
> +
> +    if (status != 0) {
> +        error_report("iSCSI: Failed to unmap data on iSCSI lun. %s",
> +                     iscsi_get_error(iscsi));
> +        iTask->status   = 1;
> +    }
> +
> +    scsi_free_scsi_task(task);
> +
> +    if (iTask->co) {
> +        qemu_coroutine_enter(iTask->co, NULL);
> +    }
> +}
> +
> +static int
> +coroutine_fn iscsi_co_write_zeroes(BlockDriverState *bs, int64_t sector_num,
> +                                   int nb_sectors)
> +{
> +    IscsiLun *iscsilun = bs->opaque;
> +    struct IscsiTask iTask;
> +    struct unmap_list list[1];
> +
> +    if (!iscsilun->lbprz || !iscsilun->lbpu) {
> +        /* fall back to writev */
> +        return -ENOTSUP;
> +    }
> +
> +    iTask.iscsilun = iscsilun;
> +    iTask.status = 0;
> +    iTask.complete = 0;
> +    iTask.bs = bs;
> +
> +    list[0].lba = sector_qemu2lun(sector_num, iscsilun);
> +    list[0].num = nb_sectors * BDRV_SECTOR_SIZE / iscsilun->block_size;
> +
> +    if (iscsi_unmap_task(iscsilun->iscsi, iscsilun->lun, 0, 0, &list[0], 1,
> +                         iscsi_co_write_zeroes_cb, &iTask) == NULL) {
> +        return -EIO;
> +    }
> +
> +    while (!iTask.complete) {
> +        iscsi_set_events(iscsilun);
> +        iTask.co = qemu_coroutine_self();
> +        qemu_coroutine_yield();
> +    }
> +
> +    if (iTask.status != 0) {
> +        return -EIO;
> +    }
> +
> +    return 0;
> +}
> +
>  static int parse_chap(struct iscsi_context *iscsi, const char *target)
>  {
>      QemuOptsList *list;
> @@ -1417,6 +1479,7 @@ static BlockDriver bdrv_iscsi = {
>      .bdrv_truncate   = iscsi_truncate,
>  
>      .bdrv_co_is_allocated = iscsi_co_is_allocated,
> +    .bdrv_co_write_zeroes = iscsi_co_write_zeroes,
>  
>      .bdrv_aio_readv  = iscsi_aio_readv,
>      .bdrv_aio_writev = iscsi_aio_writev,
> 

  reply	other threads:[~2013-06-24 14:34 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-22 20:58 [Qemu-devel] [PATCH 0/8] iscsi/qemu-img/block-migration enhancements Peter Lieven
2013-06-22 20:58 ` [Qemu-devel] [PATCH 1/8] iscsi: add logical block provisioning information to iscsilun Peter Lieven
2013-06-24 14:35   ` Paolo Bonzini
2013-06-22 20:58 ` [Qemu-devel] [PATCH 2/8] iscsi: add bdrv_co_is_allocated Peter Lieven
2013-06-24 14:36   ` Paolo Bonzini
2013-06-22 20:58 ` [Qemu-devel] [PATCH 3/8] iscsi: add bdrv_co_write_zeroes Peter Lieven
2013-06-24 14:34   ` Paolo Bonzini [this message]
2013-06-24 16:31     ` Peter Lieven
2013-06-22 20:58 ` [Qemu-devel] [PATCH 4/8] block: add bdrv_write_zeroes() Peter Lieven
2013-06-22 20:58 ` [Qemu-devel] [PATCH 5/8] block/raw: add bdrv_co_write_zeroes Peter Lieven
2013-06-22 20:58 ` [Qemu-devel] [PATCH 6/8] qemu-img: use bdrv_write_zeroes to write zeroes Peter Lieven
2013-06-24 14:33   ` Paolo Bonzini
2013-06-24 16:17     ` Peter Lieven
2013-06-24 16:25       ` Paolo Bonzini
2013-06-24 16:33         ` Peter Lieven
2013-06-24 18:46         ` Peter Lieven
2013-06-22 20:58 ` [Qemu-devel] [PATCH 7/8] iscsi: assert that sectors are aligned to LUN blocksize Peter Lieven
2013-06-24 14:30   ` Paolo Bonzini
2013-06-24 16:10     ` Peter Lieven
2013-06-24 16:13       ` Paolo Bonzini
2013-06-24 16:24         ` Peter Lieven
2013-06-24 16:27           ` Paolo Bonzini
2013-06-24 16:36             ` Peter Lieven
2013-06-22 20:58 ` [Qemu-devel] [PATCH 8/8] block-migration: efficiently encode zero blocks Peter Lieven
2013-06-24 14:32   ` Paolo Bonzini
2013-06-24 16:14     ` Peter Lieven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=51C85904.50903@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=pl@kamp.de \
    --cc=qemu-devel@nongnu.org \
    --cc=ronniesahlberg@gmail.com \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).