From: Paolo Bonzini <pbonzini@redhat.com>
To: Peter Lieven <pl@kamp.de>
Cc: kwolf@redhat.com, ronniesahlberg@gmail.com,
qemu-devel@nongnu.org, stefanha@redhat.com
Subject: Re: [Qemu-devel] [PATCHv5 3/3] iscsi: add .bdrv_co_discard
Date: Fri, 19 Jul 2013 11:18:04 +0200 [thread overview]
Message-ID: <51E9044C.80001@redhat.com> (raw)
In-Reply-To: <1374218381-18597-4-git-send-email-pl@kamp.de>
Il 19/07/2013 09:19, Peter Lieven ha scritto:
> Signed-off-by: Peter Lieven <pl@kamp.de>
> ---
> block/iscsi.c | 156 +++++++++++++++++++++++++++------------------------------
> 1 file changed, 73 insertions(+), 83 deletions(-)
>
> diff --git a/block/iscsi.c b/block/iscsi.c
> index 19afd6c..cb44fb1 100644
> --- a/block/iscsi.c
> +++ b/block/iscsi.c
> @@ -85,6 +85,7 @@ typedef struct IscsiAIOCB {
> #define NOP_INTERVAL 5000
> #define MAX_NOP_FAILURES 3
> #define ISCSI_CMD_RETRIES 5
> +#define ISCSI_MAX_UNMAP 131072
>
> static void
> iscsi_bh_cb(void *p)
> @@ -622,88 +623,6 @@ iscsi_aio_flush(BlockDriverState *bs,
> return &acb->common;
> }
>
> -static int iscsi_aio_discard_acb(IscsiAIOCB *acb);
> -
> -static void
> -iscsi_unmap_cb(struct iscsi_context *iscsi, int status,
> - void *command_data, void *opaque)
> -{
> - IscsiAIOCB *acb = opaque;
> -
> - if (acb->canceled != 0) {
> - return;
> - }
> -
> - acb->status = 0;
> - if (status != 0) {
> - if (status == SCSI_STATUS_CHECK_CONDITION
> - && acb->task->sense.key == SCSI_SENSE_UNIT_ATTENTION
> - && acb->retries-- > 0) {
> - scsi_free_scsi_task(acb->task);
> - acb->task = NULL;
> - if (iscsi_aio_discard_acb(acb) == 0) {
> - iscsi_set_events(acb->iscsilun);
> - return;
> - }
> - }
> - error_report("Failed to unmap data on iSCSI lun. %s",
> - iscsi_get_error(iscsi));
> - acb->status = -EIO;
> - }
> -
> - iscsi_schedule_bh(acb);
> -}
> -
> -static int iscsi_aio_discard_acb(IscsiAIOCB *acb) {
> - struct iscsi_context *iscsi = acb->iscsilun->iscsi;
> - struct unmap_list list[1];
> -
> - acb->canceled = 0;
> - acb->bh = NULL;
> - acb->status = -EINPROGRESS;
> - acb->buf = NULL;
> -
> - list[0].lba = sector_qemu2lun(acb->sector_num, acb->iscsilun);
> - list[0].num = acb->nb_sectors * BDRV_SECTOR_SIZE / acb->iscsilun->block_size;
> -
> - acb->task = iscsi_unmap_task(iscsi, acb->iscsilun->lun,
> - 0, 0, &list[0], 1,
> - iscsi_unmap_cb,
> - acb);
> - if (acb->task == NULL) {
> - error_report("iSCSI: Failed to send unmap command. %s",
> - iscsi_get_error(iscsi));
> - return -1;
> - }
> -
> - return 0;
> -}
> -
> -static BlockDriverAIOCB *
> -iscsi_aio_discard(BlockDriverState *bs,
> - int64_t sector_num, int nb_sectors,
> - BlockDriverCompletionFunc *cb, void *opaque)
> -{
> - IscsiLun *iscsilun = bs->opaque;
> - IscsiAIOCB *acb;
> -
> - acb = qemu_aio_get(&iscsi_aiocb_info, bs, cb, opaque);
> -
> - acb->iscsilun = iscsilun;
> - acb->nb_sectors = nb_sectors;
> - acb->sector_num = sector_num;
> - acb->retries = ISCSI_CMD_RETRIES;
> -
> - if (iscsi_aio_discard_acb(acb) != 0) {
> - qemu_aio_release(acb);
> - return NULL;
> - }
> -
> - iscsi_set_events(iscsilun);
> -
> - return &acb->common;
> -}
> -
> #ifdef __linux__
> static void
> iscsi_aio_ioctl_cb(struct iscsi_context *iscsi, int status,
> @@ -985,6 +904,77 @@ out:
> return ret;
> }
>
> +static int
> +coroutine_fn iscsi_co_discard(BlockDriverState *bs, int64_t sector_num,
> + int nb_sectors)
> +{
> + IscsiLun *iscsilun = bs->opaque;
> + struct IscsiTask iTask;
> + struct unmap_list list;
> + uint32_t nb_blocks;
> + uint32_t max_unmap;
> +
> + if (!is_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
> + return -EINVAL;
> + }
> +
> + if (!iscsilun->lbp.lbpu) {
> + /* UNMAP is not supported by the target */
> + return 0;
> + }
I guess you'll later add support for lbpws.
Anyway, series looks fine.
Paolo
> + list.lba = sector_qemu2lun(sector_num, iscsilun);
> + nb_blocks = sector_qemu2lun(nb_sectors, iscsilun);
> +
> + max_unmap = iscsilun->bl.max_unmap;
> + if (max_unmap == 0xffffffff) {
> + max_unmap = ISCSI_MAX_UNMAP;
> + }
> +
> + while (nb_blocks > 0) {
> + iscsi_co_init_iscsitask(iscsilun, &iTask);
> + list.num = nb_blocks;
> + if (list.num > max_unmap) {
> + list.num = max_unmap;
> + }
> +retry:
> + if (iscsi_unmap_task(iscsilun->iscsi, iscsilun->lun, 0, 0, &list, 1,
> + iscsi_co_generic_cb, &iTask) == NULL) {
> + return -EIO;
> + }
> +
> + while (!iTask.complete) {
> + iscsi_set_events(iscsilun);
> + qemu_coroutine_yield();
> + }
> +
> + if (iTask.task != NULL) {
> + scsi_free_scsi_task(iTask.task);
> + iTask.task = NULL;
> + }
> +
> + if (iTask.do_retry) {
> + goto retry;
> + }
> +
> + if (iTask.status == SCSI_STATUS_CHECK_CONDITION) {
> + /* the target might fail with a check condition if it
> + is not happy with the alignment of the UNMAP request
> + we silently fail in this case */
> + return 0;
> + }
> +
> + if (iTask.status != SCSI_STATUS_GOOD) {
> + return -EIO;
> + }
> +
> + list.lba += list.num;
> + nb_blocks -= list.num;
> + }
> +
> + return 0;
> +}
> +
> static int parse_chap(struct iscsi_context *iscsi, const char *target)
> {
> QemuOptsList *list;
> @@ -1527,12 +1517,12 @@ static BlockDriver bdrv_iscsi = {
> .bdrv_truncate = iscsi_truncate,
>
> .bdrv_co_get_block_status = iscsi_co_get_block_status,
> + .bdrv_co_discard = iscsi_co_discard,
>
> .bdrv_aio_readv = iscsi_aio_readv,
> .bdrv_aio_writev = iscsi_aio_writev,
> .bdrv_aio_flush = iscsi_aio_flush,
>
> - .bdrv_aio_discard = iscsi_aio_discard,
> .bdrv_has_zero_init = iscsi_has_zero_init,
>
> #ifdef __linux__
>
next prev parent reply other threads:[~2013-07-19 9:18 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-19 7:19 [Qemu-devel] [PATCHv5 0/3] iscsi/qemu-img/block-migration enhancements Peter Lieven
2013-07-19 7:19 ` [Qemu-devel] [PATCHv5 1/3] iscsi: add logical block provisioning information to iscsilun Peter Lieven
2013-07-19 7:19 ` [Qemu-devel] [PATCHv5 2/3] iscsi: add .bdrv_get_block_status Peter Lieven
2013-07-19 7:19 ` [Qemu-devel] [PATCHv5 3/3] iscsi: add .bdrv_co_discard Peter Lieven
2013-07-19 9:18 ` Paolo Bonzini [this message]
2013-07-19 9:37 ` Peter Lieven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51E9044C.80001@redhat.com \
--to=pbonzini@redhat.com \
--cc=kwolf@redhat.com \
--cc=pl@kamp.de \
--cc=qemu-devel@nongnu.org \
--cc=ronniesahlberg@gmail.com \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).