From: Paolo Bonzini <pbonzini@redhat.com>
To: famz@redhat.com
Cc: peter.maydell@linaro.org, mjt@tls.msk.ru, qemu-devel@nongnu.org,
stefanha@redhat.com, vilanova@ac.upc.edu, rth@twiddle.net
Subject: Re: [Qemu-devel] [RFC PATCH v3 1/5] make.rule: fix $(obj) to a real relative path
Date: Tue, 10 Sep 2013 09:58:02 +0200 [thread overview]
Message-ID: <522ED10A.1080107@redhat.com> (raw)
In-Reply-To: <20130910071611.GA21082@T430s.nay.redhat.com>
Il 10/09/2013 09:16, Fam Zheng ha scritto:
> The base point of unnesting is fixed to SRC_PATH:
>
> define unnest-dir
> ...
> $(eval include $(SRC_PATH)/$1/Makefile.objs)
> ...
> endef
>
> So it can't unnest "../". block-obj-y = ./ makes a little more sense, but
> $(obj) can be messed, again.
Right. I was confusing the object directory with the source directory.
> Do you think two calls of unnest-vars OK?
>
> nested-vars = obj-y
> dummy := $(call unnest-vars)
> include $(SRC_PATH)/Makefile.objs
> obj-base := ..
> nested-vars = block-obj-y common-obj-y
> dummy := $(call unnest-vars)
Yeah, that's fine.
Perhaps nested-vars and obj-base could become arguments to unnest-vars, too.
Paolo
>>> +dummy := $(call unnest-vars)
>>>
>>> all-obj-y = $(obj-y)
>>> -all-obj-y += $(addprefix ../, $(common-obj-y))
>>> +all-obj-y += $(addprefix ../, $(common-obj-y) $(block-obj-y))
>>>
>>> ifndef CONFIG_HAIKU
>>> LIBS+=-lm
>>> diff --git a/configure b/configure
>>> index e989609..cc3cd4d 100755
>>> --- a/configure
>>> +++ b/configure
>>> @@ -2251,6 +2251,7 @@ fi
>>> if $pkg_config --atleast-version=$glib_req_ver gthread-2.0; then
>>> glib_cflags=`$pkg_config --cflags gthread-2.0`
>>> glib_libs=`$pkg_config --libs gthread-2.0`
>>> + CFLAGS="$glib_cflags $CFLAGS"
>>> LIBS="$glib_libs $LIBS"
>>> libs_qga="$glib_libs $libs_qga"
>>> else
>>> diff --git a/rules.mak b/rules.mak
>>> index 4499745..3ff7d7a 100644
>>> --- a/rules.mak
>>> +++ b/rules.mak
>>> @@ -103,7 +103,7 @@ clean: clean-timestamp
>>>
>>> # magic to descend into other directories
>>>
>>> -obj := .
>>> +obj = $(obj-base)
>>> old-nested-dirs :=
>>>
>>> define push-var
>>> @@ -119,9 +119,11 @@ endef
>>>
>>> define unnest-dir
>>> $(foreach var,$(nested-vars),$(call push-var,$(var),$1/))
>>> -$(eval obj := $(obj)/$1)
>>> +$(eval obj-parent-$1 := $(obj))
>>> +$(eval obj := $(if $(obj),$(obj)/$1,$1))
>>> $(eval include $(SRC_PATH)/$1/Makefile.objs)
>>> -$(eval obj := $(patsubst %/$1,%,$(obj)))
>>> +$(eval obj := $(obj-parent-$1))
>>> +$(eval obj-parent-$1 := )
>>> $(foreach var,$(nested-vars),$(call pop-var,$(var),$1/))
>>> endef
>>>
>>> diff --git a/tests/Makefile b/tests/Makefile
>>> index baba9e9..15ef039 100644
>>> --- a/tests/Makefile
>>> +++ b/tests/Makefile
>>> @@ -110,6 +110,10 @@ test-qapi-obj-y = tests/test-qapi-visit.o tests/test-qapi-types.o
>>> $(test-obj-y): QEMU_INCLUDES += -Itests
>>> QEMU_CFLAGS += -I$(SRC_PATH)/tests
>>>
>>> +nested-vars := block-obj-y
>>> +obj-base := ..
>>> +dummy := $(call unnest-vars)
>>> +
>>> tests/test-x86-cpuid.o: QEMU_INCLUDES += -I$(SRC_PATH)/target-i386
>>>
>>> tests/check-qint$(EXESUF): tests/check-qint.o libqemuutil.a
>>>
>>
>
>
next prev parent reply other threads:[~2013-09-10 7:58 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-10 1:02 [Qemu-devel] [RFC PATCH v3 0/5] Shared Library Module Support Fam Zheng
2013-09-10 1:02 ` [Qemu-devel] [RFC PATCH v3 1/5] make.rule: fix $(obj) to a real relative path Fam Zheng
2013-09-10 6:34 ` Paolo Bonzini
2013-09-10 7:16 ` Fam Zheng
2013-09-10 7:58 ` Paolo Bonzini [this message]
2013-09-10 1:02 ` [Qemu-devel] [RFC PATCH v3 2/5] rule.mak: allow per object cflags and libs Fam Zheng
2013-09-10 1:02 ` [Qemu-devel] [RFC PATCH v3 3/5] Makefile: introduce common-obj-m and block-obj-m for DSO Fam Zheng
2013-09-10 6:45 ` Paolo Bonzini
2013-09-10 9:42 ` Fam Zheng
2013-09-10 10:01 ` Paolo Bonzini
2013-09-10 1:02 ` [Qemu-devel] [RFC PATCH v3 4/5] module: implement module loading function Fam Zheng
2013-09-10 1:02 ` [Qemu-devel] [RFC PATCH v3 5/5] block: build qed and curl as shared library Fam Zheng
2013-09-10 6:49 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=522ED10A.1080107@redhat.com \
--to=pbonzini@redhat.com \
--cc=famz@redhat.com \
--cc=mjt@tls.msk.ru \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
--cc=stefanha@redhat.com \
--cc=vilanova@ac.upc.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).