From: Erik Rull <erik.rull@rdsoftware.de>
To: "Michael S. Tsirkin" <mst@redhat.com>, qemu-devel@nongnu.org
Cc: Paolo Bonzini <pbonzini@redhat.com>, Richard Henderson <rth@redhat.com>
Subject: Re: [Qemu-devel] [PULL for-1.7 v2 4/6] acpi-build: fix build on glib < 2.14
Date: Mon, 25 Nov 2013 21:14:19 +0100 [thread overview]
Message-ID: <5293AF9B.8030903@rdsoftware.de> (raw)
In-Reply-To: <1385379990-32093-5-git-send-email-mst@redhat.com>
Michael S. Tsirkin wrote:
> g_array_get_element_size was only added in glib 2.14,
> there's no way to find element size in with an older glib.
>
> Fortunately we only use a single table (linker) where element size > 1.
> Switch element size to 1 everywhere, then we can just look at len field
> to get table size in bytes.
>
> Add an assert to make sure we catch any violations of this rule.
>
> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
> Reported-by: Richard Henderson <rth@redhat.com>
> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
> ---
> hw/i386/acpi-build.c | 5 ++++-
> hw/i386/bios-linker-loader.c | 8 ++++----
> 2 files changed, 8 insertions(+), 5 deletions(-)
>
> diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
> index 59a17df..5f36e7e 100644
> --- a/hw/i386/acpi-build.c
> +++ b/hw/i386/acpi-build.c
> @@ -425,7 +425,10 @@ static inline void *acpi_data_push(GArray *table_data, unsigned size)
>
> static unsigned acpi_data_len(GArray *table)
> {
> - return table->len * g_array_get_element_size(table);
> +#if GLIB_CHECK_VERSION(2, 14, 0)
> + assert(g_array_get_element_size(table) == 1);
> +#endif
> + return table->len;
> }
>
> static void acpi_align_size(GArray *blob, unsigned align)
> diff --git a/hw/i386/bios-linker-loader.c b/hw/i386/bios-linker-loader.c
> index 0833853..fd23611 100644
> --- a/hw/i386/bios-linker-loader.c
> +++ b/hw/i386/bios-linker-loader.c
> @@ -90,7 +90,7 @@ enum {
>
> GArray *bios_linker_loader_init(void)
> {
> - return g_array_new(false, true /* clear */, sizeof(BiosLinkerLoaderEntry));
> + return g_array_new(false, true /* clear */, 1);
> }
>
> /* Free linker wrapper and return the linker array. */
> @@ -115,7 +115,7 @@ void bios_linker_loader_alloc(GArray *linker,
> BIOS_LINKER_LOADER_ALLOC_ZONE_HIGH);
>
> /* Alloc entries must come first, so prepend them */
> - g_array_prepend_val(linker, entry);
> + g_array_prepend_vals(linker, &entry, sizeof entry);
> }
>
> void bios_linker_loader_add_checksum(GArray *linker, const char *file,
> @@ -132,7 +132,7 @@ void bios_linker_loader_add_checksum(GArray *linker, const char *file,
> entry.cksum.start = cpu_to_le32((uint8_t *)start - (uint8_t *)table);
> entry.cksum.length = cpu_to_le32(size);
>
> - g_array_append_val(linker, entry);
> + g_array_append_vals(linker, &entry, sizeof entry);
> }
>
> void bios_linker_loader_add_pointer(GArray *linker,
> @@ -154,5 +154,5 @@ void bios_linker_loader_add_pointer(GArray *linker,
> assert(pointer_size == 1 || pointer_size == 2 ||
> pointer_size == 4 || pointer_size == 8);
>
> - g_array_append_val(linker, entry);
> + g_array_append_vals(linker, &entry, sizeof entry);
> }
>
Hi all,
acpi-build.c has another occurence of g_array_get_element_size in
acpi_align_size. Please put another ifdef for the older glib here, too.
Thanks.
Best regards,
Erik
next prev parent reply other threads:[~2013-11-25 20:14 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-25 11:48 [Qemu-devel] [PULL for-1.7 v2 0/5] pc very last minute fixes for 1.7 Michael S. Tsirkin
2013-11-25 11:48 ` [Qemu-devel] [PULL for-1.7 v2 1/6] s390x: fix flat file load on 32 bit systems Michael S. Tsirkin
2013-11-25 11:48 ` [Qemu-devel] [PULL for-1.7 v2 2/6] pci: unregister vmstate_pcibus on unplug Michael S. Tsirkin
2013-11-25 11:48 ` [Qemu-devel] [PULL for-1.7 v2 3/6] acpi-build: fix build on glib < 2.22 Michael S. Tsirkin
2013-11-25 20:24 ` Richard Henderson
2013-11-25 20:31 ` Michael S. Tsirkin
2013-11-25 20:37 ` Richard Henderson
2013-11-25 20:54 ` Michael S. Tsirkin
2013-11-25 21:15 ` Laszlo Ersek
2013-11-25 21:22 ` Eric Blake
2013-11-25 21:18 ` Richard Henderson
2013-11-25 21:26 ` Michael S. Tsirkin
2013-11-25 21:02 ` Michael S. Tsirkin
2013-11-25 21:21 ` Richard Henderson
2013-11-25 21:33 ` Michael S. Tsirkin
2013-11-25 21:57 ` Laszlo Ersek
2013-11-25 11:48 ` [Qemu-devel] [PULL for-1.7 v2 4/6] acpi-build: fix build on glib < 2.14 Michael S. Tsirkin
2013-11-25 20:14 ` Erik Rull [this message]
2013-11-25 20:59 ` Michael S. Tsirkin
2013-11-25 21:01 ` Michael S. Tsirkin
2013-11-25 21:47 ` Richard Henderson
2013-11-25 22:41 ` Erik Rull
2013-11-25 20:26 ` Richard Henderson
2013-11-25 11:48 ` [Qemu-devel] [PULL for-1.7 v2 5/6] Revert "e1000/rtl8139: update HMP NIC when every bit is written" Michael S. Tsirkin
2013-11-25 11:48 ` [Qemu-devel] [PULL for-1.7 v2 6/6] configure: make --iasl option actually work Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5293AF9B.8030903@rdsoftware.de \
--to=erik.rull@rdsoftware.de \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=rth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).