From: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
To: Laszlo Ersek <lersek@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>,
Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>,
qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH v8 08/13] dump: add API to write dump header
Date: Wed, 29 Jan 2014 09:39:43 +0800 [thread overview]
Message-ID: <52E85BDF.8060706@cn.fujitsu.com> (raw)
In-Reply-To: <52E7B28D.60305@redhat.com>
On 01/28/2014 09:37 PM, Laszlo Ersek wrote:
> I seem to recall that Qiao Nuohan stated that he (*) couldn't test this
> feature on any other architecture than i686/x86_64.
>
> So my proposal is, let's not block the series based on just this one
> point. Let's review it and allow it to be merged (if there are no other
> problems).
>
> Then you and/or Christian could post a small patch that allows the
> feature to work on s390x too, checking also that your patch doesn't
> regress it on x86_64. Perhaps Qiao Nuohan could re-test at that time for
> regressions (on x86_64), and follow up with his (*) Tested-by.
>
> Does it sound acceptable?
I will retest it at that time. Thanks for your help on other architecture.
And unfortunately, Ekaterina, I have just noticed that I failed to receive
your mails. :(
BTW, I am male.
--
Regards
Qiao Nuohan
next prev parent reply other threads:[~2014-01-29 1:40 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-28 6:21 [Qemu-devel] [PATCH v8 00/13] Make 'dump-guest-memory' dump in kdump-compressed format qiaonuohan
2014-01-28 6:21 ` [Qemu-devel] [PATCH v8 01/13] dump: const-qualify the buf of WriteCoreDumpFunction qiaonuohan
2014-01-28 6:21 ` [Qemu-devel] [PATCH v8 02/13] dump: add argument to write_elfxx_notes qiaonuohan
2014-01-28 6:21 ` [Qemu-devel] [PATCH v8 03/13] dump: add API to write header of flatten format qiaonuohan
2014-02-10 19:35 ` Luiz Capitulino
2014-02-10 21:57 ` Laszlo Ersek
2014-02-10 22:48 ` Luiz Capitulino
2014-02-10 23:20 ` Laszlo Ersek
2014-02-11 9:06 ` Markus Armbruster
2014-01-28 6:21 ` [Qemu-devel] [PATCH v8 04/13] dump: add API to write vmcore qiaonuohan
2014-01-28 6:21 ` [Qemu-devel] [PATCH v8 05/13] dump: add API to write elf notes to buffer qiaonuohan
2014-01-28 6:21 ` [Qemu-devel] [PATCH v8 06/13] dump: add support for lzo/snappy qiaonuohan
2014-01-28 6:22 ` [Qemu-devel] [PATCH v8 07/13] dump: add members to DumpState and init some of them qiaonuohan
2014-01-29 14:11 ` Laszlo Ersek
2014-01-28 6:22 ` [Qemu-devel] [PATCH v8 08/13] dump: add API to write dump header qiaonuohan
2014-01-28 11:51 ` Ekaterina Tumanova
2014-01-28 13:37 ` Laszlo Ersek
2014-01-28 14:42 ` Ekaterina Tumanova
2014-01-28 14:55 ` Laszlo Ersek
2014-01-29 1:39 ` Qiao Nuohan [this message]
2014-01-29 14:19 ` Laszlo Ersek
2014-01-30 17:14 ` Ekaterina Tumanova
2014-01-28 6:22 ` [Qemu-devel] [PATCH v8 09/13] dump: add API to write dump_bitmap qiaonuohan
2014-01-29 14:32 ` Laszlo Ersek
2014-01-28 6:22 ` [Qemu-devel] [PATCH v8 10/13] dump: add APIs to operate DataCache qiaonuohan
2014-01-28 6:22 ` [Qemu-devel] [PATCH v8 11/13] dump: add API to write dump pages qiaonuohan
2014-01-29 14:39 ` Laszlo Ersek
2014-01-28 6:22 ` [Qemu-devel] [PATCH v8 12/13] dump: make kdump-compressed format available for 'dump-guest-memory' qiaonuohan
2014-01-29 14:45 ` Laszlo Ersek
2014-01-28 6:22 ` [Qemu-devel] [PATCH v8 13/13] dump: add 'query-dump-guest-memory-capability' command qiaonuohan
2014-02-10 19:10 ` Luiz Capitulino
2014-02-10 22:02 ` Laszlo Ersek
2014-02-10 23:09 ` Paolo Bonzini
2014-02-10 23:09 ` Paolo Bonzini
2014-02-10 23:30 ` Laszlo Ersek
2014-02-10 23:34 ` Paolo Bonzini
2014-02-11 0:22 ` Laszlo Ersek
2014-02-11 2:37 ` Qiao Nuohan
2014-02-11 2:47 ` Luiz Capitulino
2014-02-11 3:20 ` Qiao Nuohan
2014-02-11 7:19 ` Paolo Bonzini
2014-02-11 13:26 ` Eric Blake
2014-02-12 3:13 ` [Qemu-devel] [PATCH v9 " Qiao Nuohan
2014-02-12 3:29 ` Eric Blake
2014-02-12 6:34 ` [Qemu-devel] [PATCH v10 " Qiao Nuohan
2014-02-12 14:49 ` Luiz Capitulino
2014-02-13 1:48 ` Qiao Nuohan
2014-02-13 2:57 ` Luiz Capitulino
2014-02-13 13:13 ` Eric Blake
2014-02-13 13:45 ` Luiz Capitulino
2014-01-28 6:37 ` [Qemu-devel] [PATCH v8 00/13] Make 'dump-guest-memory' dump in kdump-compressed format Qiao Nuohan
2014-01-29 14:50 ` Laszlo Ersek
2014-01-30 17:01 ` [Qemu-devel] [PATCH] Define the architecture for compressed dump format Ekaterina Tumanova
2014-01-30 17:20 ` Laszlo Ersek
2014-01-31 13:45 ` [Qemu-devel] [PATCH v2] Define guest architecture for the compressed dump header Ekaterina Tumanova
2014-01-31 13:45 ` [Qemu-devel] [PATCH v2] Define the architecture for compressed dump format Ekaterina Tumanova
2014-01-31 13:56 ` Christian Borntraeger
2014-01-31 14:11 ` Laszlo Ersek
2014-01-31 15:04 ` [Qemu-devel] [PATCH v3 0/1] Detect arch for dump compressed header Ekaterina Tumanova
2014-01-31 15:04 ` [Qemu-devel] [PATCH v3 1/1] Define the architecture for compressed dump format Ekaterina Tumanova
2014-02-13 13:50 ` Luiz Capitulino
2014-01-31 17:14 ` [Qemu-devel] [PATCH v3 0/1] Detect arch for dump compressed header Laszlo Ersek
2014-02-10 21:23 ` Luiz Capitulino
2014-02-10 22:06 ` Laszlo Ersek
2014-02-10 3:34 ` Qiao Nuohan
2014-02-10 8:29 ` Laszlo Ersek
2014-02-10 8:57 ` Qiao Nuohan
2014-02-10 13:24 ` Luiz Capitulino
2014-02-11 17:00 ` [Qemu-devel] [PATCH v8 00/13] Make 'dump-guest-memory' dump in kdump-compressed format Luiz Capitulino
2014-02-17 17:51 ` Luiz Capitulino
2014-02-18 6:16 ` Qiao Nuohan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52E85BDF.8060706@cn.fujitsu.com \
--to=qiaonuohan@cn.fujitsu.com \
--cc=borntraeger@de.ibm.com \
--cc=lersek@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=tumanova@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).