From: Paolo Bonzini <pbonzini@redhat.com>
To: Xuebing Wang <xbing6@gmail.com>, qemu-devel@nongnu.org
Cc: afaerber@suse.de, stefanha@redhat.com
Subject: Re: [Qemu-devel] [Discussion 03/10] NEED_CPU_H: remove unnecessary use of NEED_CPU_H
Date: Tue, 04 Mar 2014 11:20:49 +0100 [thread overview]
Message-ID: <5315A901.2010007@redhat.com> (raw)
In-Reply-To: <1393901250-3922-4-git-send-email-xbing6@gmail.com>
Il 04/03/2014 03:47, Xuebing Wang ha scritto:
> Note: there is a FIXME to be addressed in this patch.
>
> For every appearance of NEED_CPU_H, there must be '#include "cpu.h"' to
> include "target-xxx/cpu.h", because the code below NEED_CPU_H depends on
> architecture-specific information.
>
> Signed-off-by: Xuebing Wang <xbing6@gmail.com>
Here I disagree. I think that if cpu.h is needed by a header, it should
be included by whoever needs that header.
> ---
> include/exec/cpu-common.h | 5 +++++
> include/hw/hw.h | 13 +++++++++----
> include/hw/xen/xen.h | 2 +-
> include/qemu/log.h | 7 ++++---
> include/sysemu/kvm.h | 2 +-
> ui/input.c | 2 --
> 6 files changed, 20 insertions(+), 11 deletions(-)
>
> diff --git a/include/exec/cpu-common.h b/include/exec/cpu-common.h
> index a21b65a..a696667 100644
> --- a/include/exec/cpu-common.h
> +++ b/include/exec/cpu-common.h
> @@ -98,6 +98,11 @@ void stl_be_phys(AddressSpace *as, hwaddr addr, uint32_t val);
> void stq_le_phys(AddressSpace *as, hwaddr addr, uint64_t val);
> void stq_be_phys(AddressSpace *as, hwaddr addr, uint64_t val);
>
> +/*
> + * FIXME: although it's nice to keep ld/st APIs together with above,
> + * below violates the idea that every NEED_CPU_H should be followed
> + * by inclusion of "target-xxx/cpu.h"
> + */
> #ifdef NEED_CPU_H
> uint32_t lduw_phys(AddressSpace *as, hwaddr addr);
> uint32_t ldl_phys(AddressSpace *as, hwaddr addr);
> diff --git a/include/hw/hw.h b/include/hw/hw.h
> index 33bdb92..3accd44 100644
> --- a/include/hw/hw.h
> +++ b/include/hw/hw.h
> @@ -4,7 +4,7 @@
>
> #include "qemu-common.h"
>
> -#if !defined(CONFIG_USER_ONLY) && !defined(NEED_CPU_H)
> +#if !defined(CONFIG_USER_ONLY)
> #include "exec/cpu-common.h"
> #endif
>
> @@ -15,6 +15,8 @@
> #include "qemu/log.h"
>
> #ifdef NEED_CPU_H
> +#include "cpu.h" /* target-xxx/cpu.h, required for TARGET_LONG_BITS */
> +
> #if TARGET_LONG_BITS == 64
> #define qemu_put_betl qemu_put_be64
> #define qemu_get_betl qemu_get_be64
> @@ -34,7 +36,7 @@
> #define qemu_put_sbetls qemu_put_sbe32s
> #define qemu_get_sbetls qemu_get_sbe32s
> #endif
> -#endif
> +#endif /* NEED_CPU_H */
>
> typedef void QEMUResetHandler(void *opaque);
>
> @@ -48,6 +50,8 @@ void qemu_register_boot_set(QEMUBootSetHandler *func, void *opaque);
> int qemu_boot_set(const char *boot_order);
>
> #ifdef NEED_CPU_H
> +#include "cpu.h" /* target-xxx/cpu.h, required for TARGET_LONG_BITS */
> +
> #if TARGET_LONG_BITS == 64
> #define VMSTATE_UINTTL_V(_f, _s, _v) \
> VMSTATE_UINT64_V(_f, _s, _v)
> @@ -63,6 +67,7 @@ int qemu_boot_set(const char *boot_order);
> #define VMSTATE_UINTTL_ARRAY_V(_f, _s, _n, _v) \
> VMSTATE_UINT32_ARRAY_V(_f, _s, _n, _v)
> #endif
> +
> #define VMSTATE_UINTTL(_f, _s) \
> VMSTATE_UINTTL_V(_f, _s, 0)
> #define VMSTATE_UINTTL_EQUAL(_f, _s) \
> @@ -70,6 +75,6 @@ int qemu_boot_set(const char *boot_order);
> #define VMSTATE_UINTTL_ARRAY(_f, _s, _n) \
> VMSTATE_UINTTL_ARRAY_V(_f, _s, _n, 0)
>
> -#endif
> +#endif /* NEED_CPU_H */
>
> -#endif
> +#endif /* QEMU_HW_H */
> diff --git a/include/hw/xen/xen.h b/include/hw/xen/xen.h
> index 34773b9..638817b 100644
> --- a/include/hw/xen/xen.h
> +++ b/include/hw/xen/xen.h
> @@ -40,7 +40,7 @@ int xen_init(void);
> int xen_hvm_init(MemoryRegion **ram_memory);
> void xenstore_store_pv_console_info(int i, struct CharDriverState *chr);
>
> -#if defined(NEED_CPU_H) && !defined(CONFIG_USER_ONLY)
> +#if !defined(CONFIG_USER_ONLY)
> void xen_ram_alloc(ram_addr_t ram_addr, ram_addr_t size,
> struct MemoryRegion *mr);
> void xen_modified_memory(ram_addr_t start, ram_addr_t length);
> diff --git a/include/qemu/log.h b/include/qemu/log.h
> index d515424..715accb 100644
> --- a/include/qemu/log.h
> +++ b/include/qemu/log.h
> @@ -6,9 +6,7 @@
> #include <stdio.h>
> #include "qemu/compiler.h"
> #include "qom/cpu.h"
> -#ifdef NEED_CPU_H
> #include "disas/disas.h"
> -#endif
>
> /* Private global variables, don't use */
> extern FILE *qemu_logfile;
> @@ -102,6 +100,9 @@ static inline void log_cpu_state_mask(int mask, CPUState *cpu, int flags)
> }
>
> #ifdef NEED_CPU_H
> +#include "cpu.h" /* target-xxx/cpu.h, required for target_ulong,
> + CPUArchState */
> +
> /* disas() and target_disas() to qemu_logfile: */
> static inline void log_target_disas(CPUArchState *env, target_ulong start,
> target_ulong len, int flags)
> @@ -121,7 +122,7 @@ static inline void log_page_dump(void)
> page_dump(qemu_logfile);
> }
> #endif
> -#endif
> +#endif /* NEED_CPU_H */
>
>
> /* Maintenance: */
> diff --git a/include/sysemu/kvm.h b/include/sysemu/kvm.h
> index 112721d..d1e5389 100644
> --- a/include/sysemu/kvm.h
> +++ b/include/sysemu/kvm.h
> @@ -58,7 +58,7 @@ extern bool kvm_gsi_routing_allowed;
> extern bool kvm_gsi_direct_mapping;
> extern bool kvm_readonly_mem_allowed;
>
> -#if defined CONFIG_KVM || !defined NEED_CPU_H
> +#if defined CONFIG_KVM
> #define kvm_enabled() (kvm_allowed)
This is wrong. There are files that do not need cpu.h and need
kvm_enabled().
Paolo
> /**
> * kvm_irqchip_in_kernel:
> diff --git a/ui/input.c b/ui/input.c
> index 1c70f60..b6d216d 100644
> --- a/ui/input.c
> +++ b/ui/input.c
> @@ -187,7 +187,6 @@ static const int key_defs[] = {
>
> [Q_KEY_CODE_INSERT] = 0xd2,
> [Q_KEY_CODE_DELETE] = 0xd3,
> -#ifdef NEED_CPU_H
> #if defined(TARGET_SPARC) && !defined(TARGET_SPARC64)
> [Q_KEY_CODE_STOP] = 0xf0,
> [Q_KEY_CODE_AGAIN] = 0xf1,
> @@ -205,7 +204,6 @@ static const int key_defs[] = {
> [Q_KEY_CODE_META_R] = 0xfd,
> [Q_KEY_CODE_COMPOSE] = 0xfe,
> #endif
> -#endif
> [Q_KEY_CODE_MAX] = 0,
> };
>
>
next prev parent reply other threads:[~2014-03-04 10:21 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-04 2:47 [Qemu-devel] [Discussion 00/10] about API hierarchy Xuebing Wang
2014-03-04 2:47 ` [Qemu-devel] [Discussion 01/10] docs: add docs/api-hierarchy.txt Xuebing Wang
2014-03-04 9:42 ` Stefan Hajnoczi
2014-03-04 9:58 ` Xuebing wang
2014-03-04 11:57 ` Stefan Hajnoczi
2014-03-04 2:47 ` [Qemu-devel] [Discussion 02/10] NEED_CPU_H: remove '#include "cpu.h"' from include/qemu-common.h Xuebing Wang
2014-03-04 10:19 ` Paolo Bonzini
2014-03-04 11:54 ` Xuebing wang
2014-03-04 12:02 ` Xuebing wang
2014-03-04 12:09 ` Paolo Bonzini
2014-03-04 12:09 ` Xuebing wang
2014-03-04 12:34 ` Peter Maydell
2014-03-04 12:40 ` Xuebing wang
2014-03-04 12:19 ` Xuebing wang
2014-03-04 12:23 ` Paolo Bonzini
2014-03-04 12:26 ` Xuebing wang
2014-03-04 12:29 ` Paolo Bonzini
2014-03-04 2:47 ` [Qemu-devel] [Discussion 03/10] NEED_CPU_H: remove unnecessary use of NEED_CPU_H Xuebing Wang
2014-03-04 10:20 ` Paolo Bonzini [this message]
2014-03-04 2:47 ` [Qemu-devel] [Discussion 04/10] memory_mapping: make this architecture-independent Xuebing Wang
2014-03-04 10:22 ` Paolo Bonzini
2014-03-04 11:05 ` Peter Maydell
2014-03-04 2:47 ` [Qemu-devel] [Discussion 05/10] NEED_CPU_H: remove unnecessary inclusion of "cpu.h" in root Xuebing Wang
2014-03-04 10:24 ` Paolo Bonzini
2014-03-04 2:47 ` [Qemu-devel] [Discussion 06/10] memory: move contents in include/exec/address-spaces.h => memory.h Xuebing Wang
2014-03-04 10:26 ` Paolo Bonzini
2014-03-04 2:47 ` [Qemu-devel] [Discussion 07/10] memory: remove file include/exec/address-spaces.h Xuebing Wang
2014-03-04 2:47 ` [Qemu-devel] [Discussion 08/10] exec: move TranslationBlock API from exec-all.h => translate.h Xuebing Wang
2014-03-04 10:27 ` Paolo Bonzini
2014-03-04 2:47 ` [Qemu-devel] [Discussion 09/10] exec: remove the unnecessary include of "exec-all.h" Xuebing Wang
2014-03-04 10:27 ` Paolo Bonzini
2014-03-04 11:11 ` Peter Maydell
2014-03-04 11:16 ` Peter Maydell
2014-03-04 2:47 ` [Qemu-devel] [Discussion 10/10] translate: remove file translate-all.h Xuebing Wang
2014-03-04 10:29 ` Paolo Bonzini
2014-03-04 3:45 ` [Qemu-devel] [Discussion 00/10] about API hierarchy Andreas Färber
2014-03-04 5:37 ` Xuebing wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5315A901.2010007@redhat.com \
--to=pbonzini@redhat.com \
--cc=afaerber@suse.de \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
--cc=xbing6@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).