Re: [Qemu-devel] Migration from older Qemu to Qemu 2.0.0 does not work

[Stefan Priebe <s.priebe@profihost.ag>]

)

Am 09.05.2014 19:05, schrieb Paolo Bonzini:
> Il 09/05/2014 15:13, Stefan Priebe - Profihost AG ha scritto:
>>
>> I see no output at the monitor of Qemu 2.0.
>>
>> # migrate -d tcp:a.b.c.d:6000
>>
>> # info migrate
>> capabilities: xbzrle: off x-rdma-pin-all: off auto-converge: on
>> zero-blocks: off
>> Migration status: failed
>> total time: 0 milliseconds
>>
>> The target machine is still running at this point with no output.
>
> Anything on its stdout?

Sadly no.

But far more complex than i thought. I'm seeing this problem only on 
machines originally started under qemu 1.5 ten migrated to qemu 1.7 with 
machine type=pc440fc-1.5 . Only those do not work. But they also do not 
work migrating them to qemu 1.7.1.

So let's ignore the whole fact and thanks for your bisect ideas. I will 
just shut them down all and start them with a fresh qemu 2.0.

> Another test you could do, in addition to changing the devices, is this:
>
> 1) try with commit 6141f3bd6904df7cf9519c6444a14a608b9874c4 on the
> destination (the next one caused a migration problem that was fixed
> later).  If it passes, go to step 1a.  If it fails, go to step 2.
>
> 1a) try with commit c01a71c1a56fa27f43449ff59e5d03b2483658a2.  If it
> passes, go to step 1b.  If it fails, report it here.
>
> 1b) bisect between v2.0.0 (known-bad) and
> c01a71c1a56fa27f43449ff59e5d03b2483658a2 (known-good) to find the
> culprit.  Report results.
>
> 2) change the source to v1.7.0 and bisect between v1.7.0 and
> 6141f3bd6904df7cf9519c6444a14a608b9874c4.  Report results.
>
> Thanks!
>
> Paolo