From: Alexey Kardashevskiy <aik@ozlabs.ru>
To: qemu-devel@nongnu.org, Juan Quintela <quintela@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>,
qemu-ppc@nongnu.org, Alexander Graf <agraf@suse.de>
Subject: Re: [Qemu-devel] [PATCH v3 8/9] vmstate: Add preallocation for migrating arrays (VMS_ALLOC flag)
Date: Fri, 13 Jun 2014 01:02:42 +1000 [thread overview]
Message-ID: <5399C112.2090205@ozlabs.ru> (raw)
In-Reply-To: <5393A77C.80202@ozlabs.ru>
On 06/08/2014 09:59 AM, Alexey Kardashevskiy wrote:
> On 06/03/2014 11:19 PM, Alexey Kardashevskiy wrote:
>> On 05/30/2014 07:34 PM, Alexey Kardashevskiy wrote:
>>> There are few helpers already to support array migration. However they all
>>> require the destination side to preallocate arrays before migration which
>>> is not always possible due to unknown array size as it might be some
>>> sort of dynamic state. One of the examples is an array of MSIX-enabled
>>> devices in SPAPR PHB - this array may vary from 0 to 65536 entries and
>>> its size depends on guest's ability to enable MSIX or do PCI hotplug.
>>>
>>> This adds new VMSTATE_VARRAY_STRUCT_ALLOC macro which is pretty similar to
>>> VMSTATE_STRUCT_VARRAY_POINTER_INT32 but it can alloc memory for migratign
>>> array on the destination side.
>>>
>>> This defines VMS_ALLOC flag for a field.
>>>
>>> This changes vmstate_base_addr() to do the allocation when receiving
>>> migration.
>>
>>
>>
>> Juan, Peter? No hurry, just pinging in order not to forget :) Thanks!
>
>
> Hi, anyone? :)
Ping?
>
>
>
>>
>>
>>>
>>> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
>>> ---
>>> include/migration/vmstate.h | 11 +++++++++++
>>> vmstate.c | 13 ++++++++++---
>>> 2 files changed, 21 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/include/migration/vmstate.h b/include/migration/vmstate.h
>>> index 7e45048..e794694 100644
>>> --- a/include/migration/vmstate.h
>>> +++ b/include/migration/vmstate.h
>>> @@ -101,6 +101,7 @@ enum VMStateFlags {
>>> VMS_VARRAY_UINT8 = 0x400, /* Array with size in uint8_t field*/
>>> VMS_VARRAY_UINT32 = 0x800, /* Array with size in uint32_t field*/
>>> VMS_MUST_EXIST = 0x1000, /* Field must exist in input */
>>> + VMS_ALLOC = 0x2000, /* Alloc a buffer on the destination */
>>> };
>>>
>>> typedef struct {
>>> @@ -429,6 +430,16 @@ extern const VMStateInfo vmstate_info_bitmap;
>>> .offset = offsetof(_state, _field), \
>>> }
>>>
>>> +#define VMSTATE_STRUCT_VARRAY_ALLOC(_field, _state, _field_num, _version, _vmsd, _type) {\
>>> + .name = (stringify(_field)), \
>>> + .version_id = (_version), \
>>> + .vmsd = &(_vmsd), \
>>> + .num_offset = vmstate_offset_value(_state, _field_num, int32_t), \
>>> + .size = sizeof(_type), \
>>> + .flags = VMS_STRUCT|VMS_VARRAY_INT32|VMS_ALLOC|VMS_POINTER, \
>>> + .offset = vmstate_offset_pointer(_state, _field, _type), \
>>> +}
>>> +
>>> #define VMSTATE_STATIC_BUFFER(_field, _state, _version, _test, _start, _size) { \
>>> .name = (stringify(_field)), \
>>> .version_id = (_version), \
>>> diff --git a/vmstate.c b/vmstate.c
>>> index b5882fa..fb95e39 100644
>>> --- a/vmstate.c
>>> +++ b/vmstate.c
>>> @@ -43,11 +43,18 @@ static int vmstate_size(void *opaque, VMStateField *field)
>>> return size;
>>> }
>>>
>>> -static void *vmstate_base_addr(void *opaque, VMStateField *field)
>>> +static void *vmstate_base_addr(void *opaque, VMStateField *field, bool alloc)
>>> {
>>> void *base_addr = opaque + field->offset;
>>>
>>> if (field->flags & VMS_POINTER) {
>>> + if (alloc && (field->flags & VMS_ALLOC)) {
>>> + int n_elems = vmstate_n_elems(opaque, field);
>>> + if (n_elems) {
>>> + *((void **)base_addr + field->start) = g_malloc_n(n_elems,
>>> + field->size);
>>> + }
>>> + }
>>> base_addr = *(void **)base_addr + field->start;
>>> }
>>>
>>> @@ -81,7 +88,7 @@ int vmstate_load_state(QEMUFile *f, const VMStateDescription *vmsd,
>>> field->field_exists(opaque, version_id)) ||
>>> (!field->field_exists &&
>>> field->version_id <= version_id)) {
>>> - void *base_addr = vmstate_base_addr(opaque, field);
>>> + void *base_addr = vmstate_base_addr(opaque, field, true);
>>> int i, n_elems = vmstate_n_elems(opaque, field);
>>> int size = vmstate_size(opaque, field);
>>>
>>> @@ -131,7 +138,7 @@ void vmstate_save_state(QEMUFile *f, const VMStateDescription *vmsd,
>>> while (field->name) {
>>> if (!field->field_exists ||
>>> field->field_exists(opaque, vmsd->version_id)) {
>>> - void *base_addr = vmstate_base_addr(opaque, field);
>>> + void *base_addr = vmstate_base_addr(opaque, field, false);
>>> int i, n_elems = vmstate_n_elems(opaque, field);
>>> int size = vmstate_size(opaque, field);
>>>
>>>
>>
>>
>
>
--
Alexey
next prev parent reply other threads:[~2014-06-12 15:03 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1401442460-32648-1-git-send-email-aik@ozlabs.ru>
[not found] ` <1401442460-32648-9-git-send-email-aik@ozlabs.ru>
2014-06-03 13:19 ` [Qemu-devel] [PATCH v3 8/9] vmstate: Add preallocation for migrating arrays (VMS_ALLOC flag) Alexey Kardashevskiy
2014-06-07 23:59 ` Alexey Kardashevskiy
2014-06-12 15:02 ` Alexey Kardashevskiy [this message]
2014-06-12 16:57 ` Alexander Graf
2014-06-19 13:56 ` Alexey Kardashevskiy
2014-06-25 11:41 ` Juan Quintela
2014-06-25 11:43 ` Alexander Graf
[not found] ` <1401442460-32648-10-git-send-email-aik@ozlabs.ru>
[not found] ` <53885895.9090200@suse.de>
[not found] ` <53888973.6010909@ozlabs.ru>
[not found] ` <53888B8D.1010507@suse.de>
2014-06-25 0:20 ` [Qemu-devel] [PATCH v3 9/9] spapr_pci: Use XICS interrupt allocator and do not cache interrupts in PHB Alexey Kardashevskiy
2014-06-25 11:43 ` [Qemu-devel] [PATCH v3 0/9] Move interrupts from spapr to xics Alexander Graf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5399C112.2090205@ozlabs.ru \
--to=aik@ozlabs.ru \
--cc=agraf@suse.de \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
--cc=quintela@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).