From: Sergey Fedorov <serge.fdrv@gmail.com>
To: Fabian Aggeler <aggelerf@ethz.ch>, qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, edgar.iglesias@gmail.com,
christoffer.dall@linaro.org, greg.bellows@linaro.org
Subject: Re: [Qemu-devel] [PATCH 06/15] hw/intc/arm_gic: Make ICDDCR/GICD_CTLR banked
Date: Tue, 26 Aug 2014 15:47:44 +0400 [thread overview]
Message-ID: <53FC73E0.6030905@gmail.com> (raw)
In-Reply-To: <1408703392-23893-7-git-send-email-aggelerf@ethz.ch>
On 22.08.2014 14:29, Fabian Aggeler wrote:
> ICDDCR/GICD_CTLR is banked in GICv1 implementations with Security
> Extensions or in GICv2 in independent from Security Extensions.
> This makes it possible to enable forwarding of interrupts from
> Distributor to the CPU interfaces for Group0 and Group1.
>
> EnableGroup0 (Bit [1]) in GICv1 is IMPDEF. Since this bit (Enable
> Non-secure) is present in the integrated IC of the Cortex-A9 MPCore,
> which implements the GICv1 profile, we support this bit in GICv1 too.
>
> Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
> ---
> hw/intc/arm_gic.c | 34 ++++++++++++++++++++++++++++++----
> hw/intc/arm_gic_common.c | 2 +-
> include/hw/intc/arm_gic_common.h | 7 ++++++-
> 3 files changed, 37 insertions(+), 6 deletions(-)
>
> diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c
> index a972942..c78b301 100644
> --- a/hw/intc/arm_gic.c
> +++ b/hw/intc/arm_gic.c
> @@ -301,8 +301,18 @@ static uint32_t gic_dist_readb(void *opaque, hwaddr offset)
> cpu = gic_get_current_cpu(s);
> cm = 1 << cpu;
> if (offset < 0x100) {
> - if (offset == 0)
> - return s->enabled;
> + if (offset == 0) {
> + res = 0;
> + if ((s->revision == 2 && !s->security_extn)
> + || (s->security_extn && !ns_access())) {
> + res = (s->enabled_grp[1] << 1) | s->enabled_grp[0];
Seems that (s->enabled_grp[1] << 1) can give wrong value, namely 4
instead of 2. See below.
> + } else if (s->security_extn && ns_access()) {
> + res = s->enabled_grp[1];
> + } else {
> + /* Neither GICv2 nor Security Extensions present */
> + res = s->enabled;
> + }
> + }
> if (offset == 4)
> /* Interrupt Controller Type Register */
> return ((s->num_irq / 32) - 1)
> @@ -469,8 +479,24 @@ static void gic_dist_writeb(void *opaque, hwaddr offset,
> cpu = gic_get_current_cpu(s);
> if (offset < 0x100) {
> if (offset == 0) {
> - s->enabled = (value & 1);
> - DPRINTF("Distribution %sabled\n", s->enabled ? "En" : "Dis");
> + if ((s->revision == 2 && !s->security_extn)
> + || (s->security_extn && !ns_access())) {
> + s->enabled_grp[0] = value & (1U << 0); /* EnableGrp0 */
> + /* For a GICv1 with Security Extn "EnableGrp1" is IMPDEF. */
> + s->enabled_grp[1] = value & (1U << 1); /* EnableGrp1 */
Here s->enabled_grp[1] can get value of 2. That can give wrong result as
noted above.
Best,
Sergey
> + DPRINTF("Group0 distribution %sabled\n"
> + "Group1 distribution %sabled\n",
> + s->enabled_grp[0] ? "En" : "Dis",
> + s->enabled_grp[1] ? "En" : "Dis");
> + } else if (s->security_extn && ns_access()) {
> + s->enabled_grp[1] = (value & 1U);
> + DPRINTF("Group1 distribution %sabled\n",
> + s->enabled_grp[1] ? "En" : "Dis");
> + } else {
> + /* Neither GICv2 nor Security Extensions present */
> + s->enabled = (value & 1U);
> + DPRINTF("Distribution %sabled\n", s->enabled ? "En" : "Dis");
> + }
> } else if (offset < 4) {
> /* ignored. */
> } else if (offset >= 0x80) {
> diff --git a/hw/intc/arm_gic_common.c b/hw/intc/arm_gic_common.c
> index f74175d..7652754 100644
> --- a/hw/intc/arm_gic_common.c
> +++ b/hw/intc/arm_gic_common.c
> @@ -64,7 +64,7 @@ static const VMStateDescription vmstate_gic = {
> .pre_save = gic_pre_save,
> .post_load = gic_post_load,
> .fields = (VMStateField[]) {
> - VMSTATE_BOOL(enabled, GICState),
> + VMSTATE_UINT8_ARRAY(enabled_grp, GICState, GIC_NR_GROUP),
> VMSTATE_BOOL_ARRAY(cpu_enabled, GICState, GIC_NCPU),
> VMSTATE_STRUCT_ARRAY(irq_state, GICState, GIC_MAXIRQ, 1,
> vmstate_gic_irq_state, gic_irq_state),
> diff --git a/include/hw/intc/arm_gic_common.h b/include/hw/intc/arm_gic_common.h
> index a61e52e..a39b066 100644
> --- a/include/hw/intc/arm_gic_common.h
> +++ b/include/hw/intc/arm_gic_common.h
> @@ -30,6 +30,8 @@
> #define GIC_NR_SGIS 16
> /* Maximum number of possible CPU interfaces, determined by GIC architecture */
> #define GIC_NCPU 8
> +/* Number of Groups (Group0 [Secure], Group1 [Non-secure]) */
> +#define GIC_NR_GROUP 2
>
> #define MAX_NR_GROUP_PRIO 128
> #define GIC_NR_APRS (MAX_NR_GROUP_PRIO / 32)
> @@ -52,7 +54,10 @@ typedef struct GICState {
>
> qemu_irq parent_irq[GIC_NCPU];
> qemu_irq parent_fiq[GIC_NCPU];
> - bool enabled;
> + union {
> + uint8_t enabled;
> + uint8_t enabled_grp[GIC_NR_GROUP]; /* EnableGrp0 and EnableGrp1 */
> + };
> bool cpu_enabled[GIC_NCPU];
>
> gic_irq_state irq_state[GIC_MAXIRQ];
next prev parent reply other threads:[~2014-08-26 11:47 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-22 10:29 [Qemu-devel] [PATCH 00/15] target-arm: Add GICv1/SecExt and GICv2/Grouping Fabian Aggeler
2014-08-22 10:29 ` [Qemu-devel] [PATCH 01/15] hw/intc/arm_gic: Request FIQ sources Fabian Aggeler
2014-08-25 9:16 ` Sergey Fedorov
2014-08-25 12:25 ` Peter Maydell
2014-08-22 10:29 ` [Qemu-devel] [PATCH 02/15] hw/arm/vexpress.c: Wire FIQ between CPU <> GIC Fabian Aggeler
2014-08-22 10:29 ` [Qemu-devel] [PATCH 03/15] hw/intc/arm_gic: Add Security Extensions property Fabian Aggeler
2014-08-25 9:20 ` Sergey Fedorov
2014-08-25 9:39 ` Aggeler Fabian
2014-08-25 10:07 ` Sergey Fedorov
2014-08-22 10:29 ` [Qemu-devel] [PATCH 04/15] hw/intc/arm_gic: Add ns_access() function Fabian Aggeler
2014-08-22 10:29 ` [Qemu-devel] [PATCH 05/15] hw/intc/arm_gic: Add Interrupt Group Registers Fabian Aggeler
2014-08-22 10:29 ` [Qemu-devel] [PATCH 06/15] hw/intc/arm_gic: Make ICDDCR/GICD_CTLR banked Fabian Aggeler
2014-08-26 11:47 ` Sergey Fedorov [this message]
2014-09-09 23:07 ` Greg Bellows
2014-08-22 10:29 ` [Qemu-devel] [PATCH 07/15] hw/intc/arm_gic: Make ICCICR/GICC_CTLR banked Fabian Aggeler
2014-09-09 23:11 ` Greg Bellows
2014-08-22 10:29 ` [Qemu-devel] [PATCH 08/15] hw/intc/arm_gic: Make ICCBPR/GICC_BPR banked Fabian Aggeler
2014-09-09 23:10 ` Greg Bellows
2014-08-22 10:29 ` [Qemu-devel] [PATCH 09/15] hw/intc/arm_gic: Implement Non-secure view of RPR Fabian Aggeler
2014-09-09 23:10 ` Greg Bellows
2014-08-22 10:29 ` [Qemu-devel] [PATCH 10/15] hw/intc/arm_gic: Handle grouping for GICC_HPPIR Fabian Aggeler
2014-08-22 10:29 ` [Qemu-devel] [PATCH 11/15] hw/intc/arm_gic: Change behavior of EOIR writes Fabian Aggeler
2014-08-22 10:29 ` [Qemu-devel] [PATCH 12/15] hw/intc/arm_gic: Change behavior of IAR writes Fabian Aggeler
2014-08-22 10:29 ` [Qemu-devel] [PATCH 13/15] hw/intc/arm_gic: Restrict priority view Fabian Aggeler
2014-09-09 23:10 ` Greg Bellows
2014-08-22 10:29 ` [Qemu-devel] [PATCH 14/15] hw/intc/arm_gic: Break out gic_update() function Fabian Aggeler
2014-08-22 10:29 ` [Qemu-devel] [PATCH 15/15] hw/intc/arm_gic: add gic_update() for grouping Fabian Aggeler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53FC73E0.6030905@gmail.com \
--to=serge.fdrv@gmail.com \
--cc=aggelerf@ethz.ch \
--cc=christoffer.dall@linaro.org \
--cc=edgar.iglesias@gmail.com \
--cc=greg.bellows@linaro.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).