From: Alexey Kardashevskiy <aik@ozlabs.ru>
To: Kevin Wolf <kwolf@redhat.com>
Cc: "libvir-list @ redhat . com" <libvir-list@redhat.com>,
qemu-devel@nongnu.org, Max Reitz <mreitz@redhat.com>,
Stefan Hajnoczi <stefanha@redhat.com>,
Paolo Bonzini <pbonzini@redhat.com>,
"Dr . David Alan Gilbert" <dgilbert@redhat.com>
Subject: Re: [Qemu-devel] [RFC PATCH] qcow2: Fix race in cache invalidation
Date: Thu, 25 Sep 2014 22:29:36 +1000 [thread overview]
Message-ID: <54240AB0.508@ozlabs.ru> (raw)
In-Reply-To: <20140925102027.GH4667@noname.redhat.com>
On 09/25/2014 08:20 PM, Kevin Wolf wrote:
> Am 25.09.2014 um 11:55 hat Alexey Kardashevskiy geschrieben:
>> Right. Cool. So is below what was suggested? I am doublechecking as it does
>> not solve the original issue - the bottomhalf is called first and then
>> nbd_trip() crashes in qcow2_co_flush_to_os().
>>
>> diff --git a/block.c b/block.c
>> index d06dd51..1e6dfd1 100644
>> --- a/block.c
>> +++ b/block.c
>> @@ -5037,20 +5037,22 @@ void bdrv_invalidate_cache(BlockDriverState *bs,
>> Error **errp)
>> if (local_err) {
>> error_propagate(errp, local_err);
>> return;
>> }
>>
>> ret = refresh_total_sectors(bs, bs->total_sectors);
>> if (ret < 0) {
>> error_setg_errno(errp, -ret, "Could not refresh total sector count");
>> return;
>> }
>> +
>> + bdrv_drain_all();
>> }
>
> Try moving the bdrv_drain_all() call to the top of the function (at
> least it must be called before bs->drv->bdrv_invalidate_cache).
Ok, I did. Did not help.
>
>> +static QEMUBH *migration_complete_bh;
>> +static void process_incoming_migration_complete(void *opaque);
>> +
>> static void process_incoming_migration_co(void *opaque)
>> {
>> QEMUFile *f = opaque;
>> - Error *local_err = NULL;
>> int ret;
>>
>> ret = qemu_loadvm_state(f);
>> qemu_fclose(f);
>
> Paolo suggested to move eveything starting from here, but as far as I
> can tell, leaving the next few lines here shouldn't hurt.
Ouch. I was looking at wrong qcow2_fclose() all this time :)
Aaaany what you suggested did not help -
bdrv_co_flush() calls qemu_coroutine_yield() while this BH is being
executed and the situation is still the same.
>
>> free_xbzrle_decoded_buf();
>> if (ret < 0) {
>> error_report("load of migration failed: %s", strerror(-ret));
>> exit(EXIT_FAILURE);
>> }
>> qemu_announce_self();
>>
>> bdrv_clear_incoming_migration_all();
>> +
>> + migration_complete_bh = aio_bh_new(qemu_get_aio_context(),
>> + process_incoming_migration_complete,
>> + NULL);
>> + qemu_bh_schedule(migration_complete_bh);
>> +}
>> +
>> +static void process_incoming_migration_complete(void *opaque)
>> +{
>> + Error *local_err = NULL;
>> +
>> /* Make sure all file formats flush their mutable metadata */
>> bdrv_invalidate_cache_all(&local_err);
>> if (local_err) {
>> qerror_report_err(local_err);
>> error_free(local_err);
>> exit(EXIT_FAILURE);
>> }
>>
>> if (autostart) {
>> vm_start();
>> } else {
>> runstate_set(RUN_STATE_PAUSED);
>> }
>> + qemu_bh_delete(migration_complete_bh);
>> + migration_complete_bh = NULL;
>> }
>
> That part looks good to me. I hope moving bdrv_drain_all() does the
> trick, otherwise there's somthing wrong with our reasoning.
>
> Kevin
>
--
Alexey
next prev parent reply other threads:[~2014-09-25 12:30 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-15 10:50 [Qemu-devel] migration: qemu-coroutine-lock.c:141: qemu_co_mutex_unlock: Assertion `mutex->locked == 1' failed Alexey Kardashevskiy
2014-09-16 12:02 ` Alexey Kardashevskiy
2014-09-16 12:10 ` Paolo Bonzini
2014-09-16 12:34 ` Kevin Wolf
2014-09-16 12:35 ` Paolo Bonzini
2014-09-16 12:52 ` Kevin Wolf
2014-09-16 12:59 ` Paolo Bonzini
2014-09-19 8:47 ` Kevin Wolf
2014-09-23 8:47 ` [Qemu-devel] [RFC PATCH] qcow2: Fix race in cache invalidation Alexey Kardashevskiy
2014-09-24 7:30 ` Alexey Kardashevskiy
2014-09-24 9:48 ` Kevin Wolf
2014-09-25 8:41 ` Alexey Kardashevskiy
2014-09-25 8:57 ` Kevin Wolf
2014-09-25 9:55 ` Alexey Kardashevskiy
2014-09-25 10:20 ` Kevin Wolf
2014-09-25 12:29 ` Alexey Kardashevskiy [this message]
2014-09-25 12:39 ` Kevin Wolf
2014-09-25 14:05 ` Alexey Kardashevskiy
2014-09-28 11:14 ` Alexey Kardashevskiy
2014-09-17 6:46 ` [Qemu-devel] migration: qemu-coroutine-lock.c:141: qemu_co_mutex_unlock: Assertion `mutex->locked == 1' failed Alexey Kardashevskiy
2014-09-16 14:52 ` Alexey Kardashevskiy
2014-09-17 9:06 ` Stefan Hajnoczi
2014-09-17 9:25 ` Paolo Bonzini
2014-09-17 13:44 ` Alexey Kardashevskiy
2014-09-17 15:07 ` Stefan Hajnoczi
2014-09-18 3:26 ` Alexey Kardashevskiy
2014-09-18 9:56 ` Paolo Bonzini
2014-09-19 8:23 ` Alexey Kardashevskiy
2014-09-17 15:04 ` Stefan Hajnoczi
2014-09-17 15:17 ` Eric Blake
2014-09-17 15:53 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54240AB0.508@ozlabs.ru \
--to=aik@ozlabs.ru \
--cc=dgilbert@redhat.com \
--cc=kwolf@redhat.com \
--cc=libvir-list@redhat.com \
--cc=mreitz@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).