From: Max Reitz <mreitz@redhat.com>
To: "Benoît Canet" <benoit.canet@nodalink.com>
Cc: Kevin Wolf <kwolf@redhat.com>,
qemu-devel@nongnu.org, Stefan Hajnoczi <stefanha@redhat.com>
Subject: Re: [Qemu-devel] [PATCH v5 08/11] qcow2: Rebuild refcount structure during check
Date: Sat, 11 Oct 2014 12:27:56 +0200 [thread overview]
Message-ID: <5439062C.8070904@redhat.com> (raw)
In-Reply-To: <20141010124439.GE22893@nodalink.com>
Am 10.10.2014 um 14:44 schrieb Benoît Canet:
>> + *nb_clusters = cluster + cluster_count - contiguous_free_clusters;
>> + *refcount_table = g_try_realloc(*refcount_table,
>> + *nb_clusters * sizeof(uint16_t));
> Something tells me that these sizeof(uint16_t) are connected to s->refcount_order
> and indirectely to REFCOUNT_SHIFT and that this code could benefit from this
> relationship thus probably saving you work in the future.
Yes, see the answer to Eric. I'm totally in favor of variable refcounts,
see my "qcow2: Drop REFCOUNT_SHIFT series". ;-)
Once again, thank you for your reviews!
Max
>> + if (!*refcount_table) {
>> + return -ENOMEM;
>> + }
>> +
>> + memset(*refcount_table + old_nb_clusters, 0,
>> + (*nb_clusters - old_nb_clusters) * sizeof(uint16_t));
>> + }
>> +
>> + /* Go back to the first free cluster */
>> + cluster -= contiguous_free_clusters;
>> + for (i = 0; i < cluster_count; i++) {
>> + (*refcount_table)[cluster + i] = 1;
>> + }
>> +
>> + return cluster << s->cluster_bits;
>> +}
>> +
>> +/*
>> + * Creates a new refcount structure based solely on the in-memory information
>> + * given through *refcount_table. All necessary allocations will be reflected
>> + * in that array.
>> + *
>> + * On success, the old refcount structure is leaked (it will be covered by the
>> + * new refcount structure).
>> + */
>> +static int rebuild_refcount_structure(BlockDriverState *bs,
>> + BdrvCheckResult *res,
>> + uint16_t **refcount_table,
>> + int64_t *nb_clusters)
>> +{
>> + BDRVQcowState *s = bs->opaque;
>> + int64_t first_free_cluster = 0, rt_ofs = -1, cluster = 0;
>> + int64_t rb_ofs, rb_start, rb_index;
>> + uint32_t reftable_size = 0;
>> + uint64_t *reftable = NULL;
>> + uint16_t *on_disk_rb;
>> + int i, ret = 0;
>> + struct {
>> + uint64_t rt_offset;
>> + uint32_t rt_clusters;
>> + } QEMU_PACKED rt_offset_and_clusters;
>> +
>> + qcow2_cache_empty(bs, s->refcount_block_cache);
>> +
>> +write_refblocks:
>> + for (; cluster < *nb_clusters; cluster++) {
>> + if (!(*refcount_table)[cluster]) {
>> + continue;
>> + }
>> +
>> + rb_index = cluster >> s->refcount_block_bits;
>> + rb_start = rb_index << s->refcount_block_bits;
>> +
>> + /* Don't allocate a cluster in a refblock already written to disk */
>> + if (first_free_cluster < rb_start) {
>> + first_free_cluster = rb_start;
>> + }
>> + rb_ofs = alloc_clusters_imrt(bs, 1, refcount_table, nb_clusters,
>> + &first_free_cluster);
>> + if (rb_ofs < 0) {
>> + fprintf(stderr, "ERROR allocating refblock: %s\n", strerror(-ret));
>> + res->check_errors++;
>> + ret = rb_ofs;
>> + goto fail;
>> + }
>> +
>> + if (reftable_size <= rb_index) {
>> + uint32_t old_rt_size = reftable_size;
>> + reftable_size = ROUND_UP((rb_index + 1) * sizeof(uint64_t),
>> + s->cluster_size) / sizeof(uint64_t);
>> + reftable = g_try_realloc(reftable,
>> + reftable_size * sizeof(uint64_t));
>> + if (!reftable) {
>> + res->check_errors++;
>> + ret = -ENOMEM;
>> + goto fail;
>> + }
>> +
>> + memset(reftable + old_rt_size, 0,
>> + (reftable_size - old_rt_size) * sizeof(uint64_t));
>> +
>> + /* The offset we have for the reftable is now no longer valid;
>> + * this will leak that range, but we can easily fix that by running
>> + * a leak-fixing check after this rebuild operation */
>> + rt_ofs = -1;
>> + }
>> + reftable[rb_index] = rb_ofs;
>> +
>> + /* If this is apparently the last refblock (for now), try to squeeze the
>> + * reftable in */
>> + if (rb_index == (*nb_clusters - 1) >> s->refcount_block_bits &&
>> + rt_ofs < 0)
>> + {
>> + rt_ofs = alloc_clusters_imrt(bs, size_to_clusters(s, reftable_size *
>> + sizeof(uint64_t)),
>> + refcount_table, nb_clusters,
>> + &first_free_cluster);
>> + if (rt_ofs < 0) {
>> + fprintf(stderr, "ERROR allocating reftable: %s\n",
>> + strerror(-ret));
>> + res->check_errors++;
>> + ret = rt_ofs;
>> + goto fail;
>> + }
>> + }
>> +
>> + ret = qcow2_pre_write_overlap_check(bs, 0, rb_ofs, s->cluster_size);
>> + if (ret < 0) {
>> + fprintf(stderr, "ERROR writing refblock: %s\n", strerror(-ret));
>> + goto fail;
>> + }
>> +
>> + on_disk_rb = g_malloc0(s->cluster_size);
>> + for (i = 0; i < s->cluster_size / sizeof(uint16_t) &&
>> + rb_start + i < *nb_clusters; i++)
>> + {
>> + on_disk_rb[i] = cpu_to_be16((*refcount_table)[rb_start + i]);
>> + }
>> +
>> + ret = bdrv_write(bs->file, rb_ofs / BDRV_SECTOR_SIZE,
>> + (void *)on_disk_rb, s->cluster_sectors);
>> + g_free(on_disk_rb);
>> + if (ret < 0) {
>> + fprintf(stderr, "ERROR writing refblock: %s\n", strerror(-ret));
>> + goto fail;
>> + }
>> +
>> + /* Go to the end of this refblock */
>> + cluster = rb_start + s->cluster_size / sizeof(uint16_t) - 1;
>> + }
>> +
>> + if (rt_ofs < 0) {
>> + int64_t post_rb_start = ROUND_UP(*nb_clusters,
>> + s->cluster_size / sizeof(uint16_t));
>> +
>> + /* Not pretty but simple */
>> + if (first_free_cluster < post_rb_start) {
>> + first_free_cluster = post_rb_start;
>> + }
>> + rt_ofs = alloc_clusters_imrt(bs, size_to_clusters(s, reftable_size *
>> + sizeof(uint64_t)),
>> + refcount_table, nb_clusters,
>> + &first_free_cluster);
>> + if (rt_ofs < 0) {
>> + fprintf(stderr, "ERROR allocating reftable: %s\n", strerror(-ret));
>> + res->check_errors++;
>> + ret = rt_ofs;
>> + goto fail;
>> + }
>> +
>> + goto write_refblocks;
>> + }
>> +
>> + assert(reftable);
>> +
>> + for (rb_index = 0; rb_index < reftable_size; rb_index++) {
>> + cpu_to_be64s(&reftable[rb_index]);
>> + }
>> +
>> + ret = qcow2_pre_write_overlap_check(bs, 0, rt_ofs,
>> + reftable_size * sizeof(uint64_t));
>> + if (ret < 0) {
>> + fprintf(stderr, "ERROR writing reftable: %s\n", strerror(-ret));
>> + goto fail;
>> + }
>> +
>> + ret = bdrv_write(bs->file, rt_ofs / BDRV_SECTOR_SIZE, (void *)reftable,
>> + reftable_size * sizeof(uint64_t) / BDRV_SECTOR_SIZE);
>> + if (ret < 0) {
>> + fprintf(stderr, "ERROR writing reftable: %s\n", strerror(-ret));
>> + goto fail;
>> + }
>> +
>> + /* Enter new reftable into the image header */
>> + cpu_to_be64w(&rt_offset_and_clusters.rt_offset, rt_ofs);
>> + cpu_to_be32w(&rt_offset_and_clusters.rt_clusters,
>> + size_to_clusters(s, reftable_size * sizeof(uint64_t)));
>> + ret = bdrv_pwrite_sync(bs->file, offsetof(QCowHeader,
>> + refcount_table_offset),
>> + &rt_offset_and_clusters,
>> + sizeof(rt_offset_and_clusters));
>> + if (ret < 0) {
>> + fprintf(stderr, "ERROR setting reftable: %s\n", strerror(-ret));
>> + goto fail;
>> + }
>> +
>> + for (rb_index = 0; rb_index < reftable_size; rb_index++) {
>> + be64_to_cpus(&reftable[rb_index]);
>> + }
>> + s->refcount_table = reftable;
>> + s->refcount_table_offset = rt_ofs;
>> + s->refcount_table_size = reftable_size;
>> +
>> + return 0;
>> +
>> +fail:
>> + g_free(reftable);
>> + return ret;
>> +}
>> +
>> +/*
>> * Checks an image for refcount consistency.
>> *
>> * Returns 0 if no errors are found, the number of errors in case the image is
>> @@ -1612,6 +1872,7 @@ int qcow2_check_refcounts(BlockDriverState *bs, BdrvCheckResult *res,
>> BdrvCheckMode fix)
>> {
>> BDRVQcowState *s = bs->opaque;
>> + BdrvCheckResult pre_compare_res;
>> int64_t size, highest_cluster, nb_clusters;
>> uint16_t *refcount_table = NULL;
>> bool rebuild = false;
>> @@ -1638,11 +1899,30 @@ int qcow2_check_refcounts(BlockDriverState *bs, BdrvCheckResult *res,
>> goto fail;
>> }
>>
>> - compare_refcounts(bs, res, fix, &rebuild, &highest_cluster, refcount_table,
>> + /* In case we don't need to rebuild the refcount structure (but want to fix
>> + * something), this function is immediately called again, in which case the
>> + * result should be ignored */
>> + pre_compare_res = *res;
>> + compare_refcounts(bs, res, 0, &rebuild, &highest_cluster, refcount_table,
>> nb_clusters);
>>
>> - if (rebuild) {
>> - fprintf(stderr, "ERROR need to rebuild refcount structures\n");
>> + if (rebuild && (fix & BDRV_FIX_ERRORS)) {
>> + fprintf(stderr, "Rebuilding refcount structure\n");
>> + ret = rebuild_refcount_structure(bs, res, &refcount_table,
>> + &nb_clusters);
>> + if (ret < 0) {
>> + goto fail;
>> + }
>> + } else if (fix) {
>> + if (rebuild) {
>> + fprintf(stderr, "ERROR need to rebuild refcount structures\n");
>> + }
>> +
>> + if (res->leaks || res->corruptions) {
>> + *res = pre_compare_res;
>> + compare_refcounts(bs, res, fix, &rebuild, &highest_cluster,
>> + refcount_table, nb_clusters);
>> + }
>> }
>>
>> /* check OFLAG_COPIED */
>> --
>> 2.1.0
>>
next prev parent reply other threads:[~2014-10-11 10:28 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-29 21:40 [Qemu-devel] [PATCH v5 00/11] qcow2: Fix image repairing Max Reitz
2014-08-29 21:40 ` [Qemu-devel] [PATCH v5 01/11] qcow2: Calculate refcount block entry count Max Reitz
2014-08-29 23:03 ` Eric Blake
2014-09-02 18:56 ` Max Reitz
2014-10-10 12:29 ` Benoît Canet
2014-10-11 10:27 ` Max Reitz
2014-10-20 14:25 ` Kevin Wolf
2014-10-20 14:39 ` Max Reitz
2014-10-20 14:48 ` Kevin Wolf
2014-10-21 16:26 ` Max Reitz
2014-10-22 8:27 ` Kevin Wolf
2014-08-29 21:40 ` [Qemu-devel] [PATCH v5 02/11] qcow2: Fix leaks in dirty images Max Reitz
2014-10-20 14:28 ` Kevin Wolf
2014-08-29 21:40 ` [Qemu-devel] [PATCH v5 03/11] qcow2: Split qcow2_check_refcounts() Max Reitz
2014-10-20 14:45 ` Kevin Wolf
2014-08-29 21:40 ` [Qemu-devel] [PATCH v5 04/11] qcow2: Pull check_refblocks() up Max Reitz
2014-08-29 21:40 ` [Qemu-devel] [PATCH v5 05/11] qcow2: Reuse refcount table in calculate_refcounts() Max Reitz
2014-08-29 21:40 ` [Qemu-devel] [PATCH v5 06/11] qcow2: Fix refcount blocks beyond image end Max Reitz
2014-08-29 21:40 ` [Qemu-devel] [PATCH v5 07/11] qcow2: Do not perform potentially damaging repairs Max Reitz
2014-08-29 21:41 ` [Qemu-devel] [PATCH v5 08/11] qcow2: Rebuild refcount structure during check Max Reitz
2014-10-08 23:09 ` Eric Blake
2014-10-11 10:17 ` Max Reitz
2014-10-16 15:27 ` Max Reitz
2014-10-16 15:33 ` Eric Blake
2014-10-10 12:44 ` Benoît Canet
2014-10-11 10:27 ` Max Reitz [this message]
2014-10-11 18:56 ` Benoît Canet
2014-10-12 7:32 ` Max Reitz
2014-08-29 21:41 ` [Qemu-devel] [PATCH v5 09/11] qcow2: Clean up after refcount rebuild Max Reitz
2014-08-29 21:41 ` [Qemu-devel] [PATCH v5 10/11] iotests: Fix test outputs Max Reitz
2014-09-02 19:49 ` Eric Blake
2014-08-29 21:41 ` [Qemu-devel] [PATCH v5 11/11] iotests: Add test for potentially damaging repairs Max Reitz
2014-09-02 19:52 ` Eric Blake
2014-10-08 19:25 ` [Qemu-devel] [PATCH v5 00/11] qcow2: Fix image repairing Max Reitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5439062C.8070904@redhat.com \
--to=mreitz@redhat.com \
--cc=benoit.canet@nodalink.com \
--cc=kwolf@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).