From: Laszlo Ersek <lersek@redhat.com>
To: Olivier Martin <olivier.martin@arm.com>
Cc: peter.maydell@linaro.org, drjones@redhat.com,
edk2-devel@lists.sourceforge.net, qemu-devel@nongnu.org,
ard.biesheuvel@linaro.org
Subject: Re: [Qemu-devel] [edk2] [edk2 PATCH 01/12] ArmVirtualizationPkg: VirtFdtDxe: forward FwCfg addresses from DTB to PCDs
Date: Fri, 05 Dec 2014 18:39:29 +0100 [thread overview]
Message-ID: <5481EDD1.1030100@redhat.com> (raw)
In-Reply-To: <1417130367-17777-2-git-send-email-lersek@redhat.com>
On 11/28/14 00:19, Laszlo Ersek wrote:
> Qemu's firmware configuration interface consists of two MMIO registers, a
> 16-bit selector and an 8-bit data register. Parse their addresses and
> verify their sizes from the DTB, and expose them to the rest of DXE by
> storing them in dynamic PCDs.
>
> Contributed-under: TianoCore Contribution Agreement 1.0
> Signed-off-by: Laszlo Ersek <lersek@redhat.com>
> ---
> ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.inf | 2 ++
> ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.c | 26 ++++++++++++++++++++++++++
> ArmPlatformPkg/ArmVirtualizationPkg/ArmVirtualizationPkg.dec | 3 +++
> ArmPlatformPkg/ArmVirtualizationPkg/ArmVirtualizationQemu.dsc | 3 +++
> 4 files changed, 34 insertions(+)
>
> diff --git a/ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.inf b/ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.inf
> index 1c9dd20..daafe6c 100644
> --- a/ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.inf
> +++ b/ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.inf
> @@ -47,6 +47,8 @@
> [Pcd]
> gArmVirtualizationTokenSpaceGuid.PcdDeviceTreeBaseAddress
> gArmVirtualizationTokenSpaceGuid.PcdArmPsciMethod
> + gArmVirtualizationTokenSpaceGuid.PcdFwCfgSelectorAddress
> + gArmVirtualizationTokenSpaceGuid.PcdFwCfgDataAddress
> gArmTokenSpaceGuid.PcdGicDistributorBase
> gArmTokenSpaceGuid.PcdGicInterruptInterfaceBase
> gArmTokenSpaceGuid.PcdArmArchTimerSecIntrNum
> diff --git a/ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.c b/ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.c
> index d002e66..f1b5283 100644
> --- a/ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.c
> +++ b/ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.c
> @@ -44,6 +44,7 @@ typedef enum {
> PropertyTypeUart,
> PropertyTypeTimer,
> PropertyTypePsci,
> + PropertyTypeFwCfg,
> } PROPERTY_TYPE;
>
> typedef struct {
> @@ -59,6 +60,7 @@ STATIC CONST PROPERTY CompatibleProperties[] = {
> { PropertyTypeTimer, "arm,armv7-timer" },
> { PropertyTypeTimer, "arm,armv8-timer" },
> { PropertyTypePsci, "arm,psci-0.2" },
> + { PropertyTypeFwCfg, "fw-cfg,mmio" },
The part of the DTB that exposes this device was slightly changed. Since
there were no review comments thus far, I'll post a v2 of this edk2 series.
Thanks
Laszlo
next prev parent reply other threads:[~2014-12-05 17:40 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-27 23:17 [Qemu-devel] expose QEMU's fw_cfg boot order to ARM guest firmware (Intel BDS) Laszlo Ersek
2014-11-27 23:18 ` [Qemu-devel] [qemu PATCH 0/2] DTB- and MMIO-based fw_cfg for hw/arm/virt Laszlo Ersek
2014-11-27 23:18 ` [Qemu-devel] [qemu PATCH 1/2] fw_cfg: make the FW_CFG_SIZE and FW_CFG_DATA_SIZE macros public Laszlo Ersek
2014-11-27 23:18 ` [Qemu-devel] [qemu PATCH 2/2] arm: add fw_cfg to "virt" board Laszlo Ersek
2014-11-27 23:28 ` Peter Maydell
2014-11-27 23:34 ` Laszlo Ersek
2014-11-27 23:37 ` Peter Maydell
2014-11-28 10:38 ` Andrew Jones
2014-11-28 10:43 ` Laszlo Ersek
2014-11-28 10:49 ` Laszlo Ersek
2014-11-28 11:17 ` Andrew Jones
2014-11-28 10:51 ` Andrew Jones
2014-11-27 23:19 ` [Qemu-devel] [edk2 PATCH 00/12] consume fw_cfg boot order in ArmVirtualizationQemu Laszlo Ersek
2014-11-27 23:19 ` [Qemu-devel] [edk2 PATCH 01/12] ArmVirtualizationPkg: VirtFdtDxe: forward FwCfg addresses from DTB to PCDs Laszlo Ersek
2014-12-05 17:39 ` Laszlo Ersek [this message]
2014-11-27 23:19 ` [Qemu-devel] [edk2 PATCH 02/12] ArmVirtualizationPkg: introduce QemuFwCfgLib instance for DXE drivers Laszlo Ersek
2014-11-27 23:19 ` [Qemu-devel] [edk2 PATCH 03/12] ArmVirtualizationPkg: clone PlatformIntelBdsLib from ArmPlatformPkg Laszlo Ersek
2014-11-27 23:19 ` [Qemu-devel] [edk2 PATCH 04/12] ArmVirtualizationPkg: PlatformIntelBdsLib: add basic policy Laszlo Ersek
2014-11-27 23:19 ` [Qemu-devel] [edk2 PATCH 05/12] OvmfPkg: extract QemuBootOrderLib Laszlo Ersek
2014-11-27 23:19 ` [Qemu-devel] [edk2 PATCH 06/12] OvmfPkg: QemuBootOrderLib: featurize PCI-like device path translation Laszlo Ersek
2014-11-27 23:19 ` [Qemu-devel] [edk2 PATCH 07/12] OvmfPkg: introduce VIRTIO_MMIO_TRANSPORT_GUID Laszlo Ersek
2014-11-27 23:19 ` [Qemu-devel] [edk2 PATCH 08/12] ArmVirtualizationPkg: VirtFdtDxe: use dedicated VIRTIO_MMIO_TRANSPORT_GUID Laszlo Ersek
2014-11-27 23:19 ` [Qemu-devel] [edk2 PATCH 09/12] OvmfPkg: QemuBootOrderLib: widen ParseUnitAddressHexList() to UINT64 Laszlo Ersek
2014-11-27 23:19 ` [Qemu-devel] [edk2 PATCH 10/12] OvmfPkg: QemuBootOrderLib: OFW-to-UEFI translation for virtio-mmio Laszlo Ersek
2014-11-27 23:19 ` [Qemu-devel] [edk2 PATCH 11/12] ArmVirtualizationPkg: PlatformIntelBdsLib: adhere to QEMU's boot order Laszlo Ersek
2014-11-27 23:19 ` [Qemu-devel] [edk2 PATCH 12/12] ArmVirtualizationPkg: identify "new shell" as builtin shell for Intel BDS Laszlo Ersek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5481EDD1.1030100@redhat.com \
--to=lersek@redhat.com \
--cc=ard.biesheuvel@linaro.org \
--cc=drjones@redhat.com \
--cc=edk2-devel@lists.sourceforge.net \
--cc=olivier.martin@arm.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).