From: Max Reitz <mreitz@redhat.com>
To: Jeff Cody <jcody@redhat.com>, qemu-devel@nongnu.org
Cc: kwolf@redhat.com, amulya.lokesha@emc.com, stefanha@redhat.com
Subject: Re: [Qemu-devel] [PATCH 2/4] block: vhdx - update PAYLOAD_BLOCK_UNMAPPED value to match 1.00 spec
Date: Mon, 08 Dec 2014 09:44:25 +0100 [thread overview]
Message-ID: <548564E9.80600@redhat.com> (raw)
In-Reply-To: <8a4d2da73a8dbc04cde62bea782fc09ff84b1cf1.1418018421.git.jcody@redhat.com>
On 2014-12-08 at 07:07, Jeff Cody wrote:
> The 0.95 VHDX spec defined PAYLOAD_BLOCK_UNMAPPED to be 5. The 1.00
> VHDX spec redefines PAYLOAD_BLOCK_UNMAPPED to be 3 instead.
>
> The original value of 5 is now an undefined state in the spec, but it
> should be safe to treat it the same and return zeros for data read.
> This way, we can maintain compatibility with any images out in the wild
> that may have been created in accordance to the 0.95 spec.
>
> Reported-by: Kevin Wolf <kwolf@redhat.com>
> Signed-off-by: Jeff Cody <jcody@redhat.com>
> ---
> block/vhdx.c | 3 ++-
> block/vhdx.h | 3 ++-
> 2 files changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/block/vhdx.c b/block/vhdx.c
> index f1e1e2e..bec10bd 100644
> --- a/block/vhdx.c
> +++ b/block/vhdx.c
> @@ -1111,6 +1111,7 @@ static coroutine_fn int vhdx_co_readv(BlockDriverState *bs, int64_t sector_num,
> case PAYLOAD_BLOCK_NOT_PRESENT: /* fall through */
> case PAYLOAD_BLOCK_UNDEFINED:
> case PAYLOAD_BLOCK_UNMAPPED:
> + case PAYLOAD_BLOCK_UNMAPPED_v095:
> case PAYLOAD_BLOCK_ZERO:
> /* return zero */
> qemu_iovec_memset(&hd_qiov, 0, 0, sinfo.bytes_avail);
> @@ -1277,10 +1278,10 @@ static coroutine_fn int vhdx_co_writev(BlockDriverState *bs, int64_t sector_num,
> sectors_to_write += iov2.iov_len >> BDRV_SECTOR_BITS;
> }
> }
> -
Was this line removal intended?
Anyway:
Reviewed-by: Max Reitz <mreitz@redhat.com>
> /* fall through */
> case PAYLOAD_BLOCK_NOT_PRESENT: /* fall through */
> case PAYLOAD_BLOCK_UNMAPPED:
> + case PAYLOAD_BLOCK_UNMAPPED_v095:
> case PAYLOAD_BLOCK_UNDEFINED:
> bat_prior_offset = sinfo.file_offset;
> ret = vhdx_allocate_block(bs, s, &sinfo.file_offset);
> diff --git a/block/vhdx.h b/block/vhdx.h
> index b4a12a0..7003ab7 100644
> --- a/block/vhdx.h
> +++ b/block/vhdx.h
> @@ -226,7 +226,8 @@ typedef struct QEMU_PACKED VHDXLogDataSector {
> #define PAYLOAD_BLOCK_NOT_PRESENT 0
> #define PAYLOAD_BLOCK_UNDEFINED 1
> #define PAYLOAD_BLOCK_ZERO 2
> -#define PAYLOAD_BLOCK_UNMAPPED 5
> +#define PAYLOAD_BLOCK_UNMAPPED 3
> +#define PAYLOAD_BLOCK_UNMAPPED_v095 5
> #define PAYLOAD_BLOCK_FULLY_PRESENT 6
> #define PAYLOAD_BLOCK_PARTIALLY_PRESENT 7
next prev parent reply other threads:[~2014-12-08 8:44 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-08 6:07 [Qemu-devel] [PATCH 0/4] VHDX Fixes for zero init Jeff Cody
2014-12-08 6:07 ` [Qemu-devel] [PATCH 1/4] block: vhdx - remove redundant comments Jeff Cody
2014-12-08 8:42 ` Max Reitz
2014-12-12 13:28 ` Stefan Hajnoczi
2014-12-15 9:04 ` Markus Armbruster
2014-12-08 6:07 ` [Qemu-devel] [PATCH 2/4] block: vhdx - update PAYLOAD_BLOCK_UNMAPPED value to match 1.00 spec Jeff Cody
2014-12-08 8:44 ` Max Reitz [this message]
2014-12-08 6:07 ` [Qemu-devel] [PATCH 3/4] block: vhdx - change .vhdx_create default block state to ZERO Jeff Cody
2014-12-08 8:48 ` Max Reitz
2014-12-08 6:07 ` [Qemu-devel] [PATCH 4/4] block: vhdx - set .bdrv_has_zero_init to bdrv_has_zero_init_1 Jeff Cody
2014-12-08 8:50 ` Max Reitz
2014-12-11 4:21 ` Lokesha, Amulya
2014-12-11 9:06 ` Max Reitz
2014-12-12 14:43 ` Lokesha, Amulya
2014-12-12 15:17 ` Jeff Cody
2014-12-12 15:59 ` Lokesha, Amulya
2014-12-17 10:46 ` Lokesha, Amulya
2014-12-17 12:14 ` Jeff Cody
2014-12-23 10:07 ` Lokesha, Amulya
2014-12-23 14:03 ` Jeff Cody
2015-01-06 10:30 ` Lokesha, Amulya
2014-12-12 15:44 ` [Qemu-devel] [PATCH 0/4] VHDX Fixes for zero init Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=548564E9.80600@redhat.com \
--to=mreitz@redhat.com \
--cc=amulya.lokesha@emc.com \
--cc=jcody@redhat.com \
--cc=kwolf@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).