From: Paolo Bonzini <pbonzini@redhat.com>
To: Gerd Hoffmann <kraxel@redhat.com>, qemu-devel@nongnu.org
Cc: Michael Walle <michael@walle.cc>, Anthony Liguori <aliguori@amazon.com>
Subject: Re: [Qemu-devel] [PATCH 1/4] configure: opengl overhaul
Date: Mon, 12 Jan 2015 13:55:18 +0100 [thread overview]
Message-ID: <54B3C436.5080402@redhat.com> (raw)
In-Reply-To: <1421066126-25737-2-git-send-email-kraxel@redhat.com>
On 12/01/2015 13:35, Gerd Hoffmann wrote:
> Rename config option from "glx" to "opengl", glx will not be the only
> option for opengl in near future. Also switch over to pkg-config for
> opengl support detection.
>
> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd, since you're working in this area, can you pick up
http://article.gmane.org/gmane.comp.emulators.qemu/313402 as well? I
had queued it for my next pull request, but it conflicts with your stuff.
Paolo
> ---
> configure | 39 +++++++++++++++++----------------------
> default-configs/lm32-softmmu.mak | 2 +-
> hw/display/Makefile.objs | 2 +-
> hw/lm32/milkymist-hw.h | 4 ++--
> include/sysemu/sysemu.h | 1 +
> vl.c | 1 +
> 6 files changed, 23 insertions(+), 26 deletions(-)
>
> diff --git a/configure b/configure
> index cae588c..ee1693b 100755
> --- a/configure
> +++ b/configure
> @@ -309,7 +309,7 @@ rbd=""
> smartcard_nss=""
> libusb=""
> usb_redir=""
> -glx=""
> +opengl=""
> zlib="yes"
> lzo=""
> snappy=""
> @@ -1026,9 +1026,9 @@ for opt do
> ;;
> --enable-vhost-scsi) vhost_scsi="yes"
> ;;
> - --disable-glx) glx="no"
> + --disable-opengl) opengl="no"
> ;;
> - --enable-glx) glx="yes"
> + --enable-opengl) opengl="yes"
> ;;
> --disable-rbd) rbd="no"
> ;;
> @@ -3056,23 +3056,18 @@ fi
> libs_softmmu="$libs_softmmu $fdt_libs"
>
> ##########################################
> -# GLX probe, used by milkymist-tmu2
> -if test "$glx" != "no" ; then
> - glx_libs="-lGL -lX11"
> - cat > $TMPC << EOF
> -#include <X11/Xlib.h>
> -#include <GL/gl.h>
> -#include <GL/glx.h>
> -int main(void) { glBegin(0); glXQueryVersion(0,0,0); return 0; }
> -EOF
> - if compile_prog "" "-lGL -lX11" ; then
> - glx=yes
> +# opengl probe, used by milkymist-tmu2
> +if test "$opengl" != "no" ; then
> + opengl_pkgs="gl"
> + if $pkg_config $opengl_pkgs; then
> + opengl_libs="$($pkg_config --libs $opengl_pkgs) -lX11"
> + opengl=yes
> else
> - if test "$glx" = "yes" ; then
> - feature_not_found "glx" "Install GL devel (e.g. MESA)"
> + if test "$opengl" = "yes" ; then
> + feature_not_found "opengl" "Install GL devel (e.g. MESA)"
> fi
> - glx_libs=
> - glx=no
> + opengl_libs=""
> + opengl=no
> fi
> fi
>
> @@ -4320,7 +4315,7 @@ echo "xfsctl support $xfs"
> echo "nss used $smartcard_nss"
> echo "libusb $libusb"
> echo "usb net redir $usb_redir"
> -echo "GLX support $glx"
> +echo "OpenGL support $opengl"
> echo "libiscsi support $libiscsi"
> echo "libnfs support $libnfs"
> echo "build guest agent $guest_agent"
> @@ -4682,9 +4677,9 @@ if test "$usb_redir" = "yes" ; then
> echo "CONFIG_USB_REDIR=y" >> $config_host_mak
> fi
>
> -if test "$glx" = "yes" ; then
> - echo "CONFIG_GLX=y" >> $config_host_mak
> - echo "GLX_LIBS=$glx_libs" >> $config_host_mak
> +if test "$opengl" = "yes" ; then
> + echo "CONFIG_OPENGL=y" >> $config_host_mak
> + echo "OPENGL_LIBS=$opengl_libs" >> $config_host_mak
> fi
>
> if test "$lzo" = "yes" ; then
> diff --git a/default-configs/lm32-softmmu.mak b/default-configs/lm32-softmmu.mak
> index 7df58c8..4889348 100644
> --- a/default-configs/lm32-softmmu.mak
> +++ b/default-configs/lm32-softmmu.mak
> @@ -2,7 +2,7 @@
>
> CONFIG_LM32=y
> CONFIG_MILKYMIST=y
> -CONFIG_MILKYMIST_TMU2=$(CONFIG_GLX)
> +CONFIG_MILKYMIST_TMU2=$(CONFIG_OPENGL)
> CONFIG_FRAMEBUFFER=y
> CONFIG_PTIMER=y
> CONFIG_PFLASH_CFI01=y
> diff --git a/hw/display/Makefile.objs b/hw/display/Makefile.objs
> index 7ed76a9..e18ea57 100644
> --- a/hw/display/Makefile.objs
> +++ b/hw/display/Makefile.objs
> @@ -20,7 +20,7 @@ common-obj-$(CONFIG_ZAURUS) += tc6393xb.o
>
> ifeq ($(CONFIG_MILKYMIST_TMU2),y)
> common-obj-y += milkymist-tmu2.o
> -libs_softmmu += $(GLX_LIBS)
> +libs_softmmu += $(OPENGL_LIBS)
> endif
>
> obj-$(CONFIG_OMAP) += omap_dss.o
> diff --git a/hw/lm32/milkymist-hw.h b/hw/lm32/milkymist-hw.h
> index 5317ce6..8d20cac 100644
> --- a/hw/lm32/milkymist-hw.h
> +++ b/hw/lm32/milkymist-hw.h
> @@ -86,7 +86,7 @@ static inline DeviceState *milkymist_pfpu_create(hwaddr base,
> return dev;
> }
>
> -#ifdef CONFIG_GLX
> +#ifdef CONFIG_OPENGL
> #include <X11/Xlib.h>
> #include <GL/glx.h>
> static const int glx_fbconfig_attr[] = {
> @@ -100,7 +100,7 @@ static const int glx_fbconfig_attr[] = {
> static inline DeviceState *milkymist_tmu2_create(hwaddr base,
> qemu_irq irq)
> {
> -#ifdef CONFIG_GLX
> +#ifdef CONFIG_OPENGL
> DeviceState *dev;
> Display *d;
> GLXFBConfig *configs;
> diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h
> index 503e5a4..e5c91eb 100644
> --- a/include/sysemu/sysemu.h
> +++ b/include/sysemu/sysemu.h
> @@ -117,6 +117,7 @@ extern int graphic_width;
> extern int graphic_height;
> extern int graphic_depth;
> extern DisplayType display_type;
> +extern int display_opengl;
> extern const char *keyboard_layout;
> extern int win2k_install_hack;
> extern int alt_grab;
> diff --git a/vl.c b/vl.c
> index bea9656..06e8f44 100644
> --- a/vl.c
> +++ b/vl.c
> @@ -129,6 +129,7 @@ static int data_dir_idx;
> const char *bios_name = NULL;
> enum vga_retrace_method vga_retrace_method = VGA_RETRACE_DUMB;
> DisplayType display_type = DT_DEFAULT;
> +int display_opengl;
> static int display_remote;
> const char* keyboard_layout = NULL;
> ram_addr_t ram_size;
>
next prev parent reply other threads:[~2015-01-12 12:55 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-12 12:35 [Qemu-devel] [PATCH 0/4] sdl2: add opengl rendering support Gerd Hoffmann
2015-01-12 12:35 ` [Qemu-devel] [PATCH 1/4] configure: opengl overhaul Gerd Hoffmann
2015-01-12 12:55 ` Paolo Bonzini [this message]
2015-01-12 13:11 ` Gerd Hoffmann
2015-01-15 19:55 ` Max Reitz
2015-01-16 9:11 ` Gerd Hoffmann
2015-01-12 12:35 ` [Qemu-devel] [PATCH 2/4] console: add opengl rendering helper functions Gerd Hoffmann
2015-01-12 13:04 ` Paolo Bonzini
2015-01-12 13:13 ` Gerd Hoffmann
2015-01-15 20:46 ` Max Reitz
2015-01-16 9:21 ` Gerd Hoffmann
2015-01-16 15:05 ` Max Reitz
2015-01-12 12:35 ` [Qemu-devel] [PATCH 3/4] sdl2: add support for display rendering using opengl Gerd Hoffmann
2015-01-15 22:14 ` Max Reitz
2015-01-12 12:35 ` [Qemu-devel] [PATCH 4/4] sdl2: move SDL_* includes to sdl2.h Gerd Hoffmann
2015-01-15 22:21 ` Max Reitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54B3C436.5080402@redhat.com \
--to=pbonzini@redhat.com \
--cc=aliguori@amazon.com \
--cc=kraxel@redhat.com \
--cc=michael@walle.cc \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).