From: Marcel Apfelbaum <marcel@redhat.com>
To: Igor Mammedov <imammedo@redhat.com>, qemu-devel@nongnu.org
Cc: marcel.a@redhat.com, mst@redhat.com
Subject: Re: [Qemu-devel] [PATCH v5 4/5] acpi: drop min-bytes in build_package()
Date: Wed, 21 Jan 2015 11:25:07 +0200 [thread overview]
Message-ID: <54BF7073.6030005@redhat.com> (raw)
In-Reply-To: <1421831353-5507-5-git-send-email-imammedo@redhat.com>
On 01/21/2015 11:09 AM, Igor Mammedov wrote:
> Signed-off-by: Igor Mammedov <imammedo@redhat.com>
> Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
> ---
> hw/acpi/acpi-build-utils.c | 14 ++++----------
> hw/i386/acpi-build.c | 13 ++++++-------
> include/hw/acpi/acpi-build-utils.h | 4 ++--
> 3 files changed, 12 insertions(+), 19 deletions(-)
>
> diff --git a/hw/acpi/acpi-build-utils.c b/hw/acpi/acpi-build-utils.c
> index aed9066..602e68c 100644
> --- a/hw/acpi/acpi-build-utils.c
> +++ b/hw/acpi/acpi-build-utils.c
> @@ -167,7 +167,7 @@ enum {
> PACKAGE_LENGTH_4BYTE_SHIFT = 20,
> };
>
> -void build_prepend_package_length(GArray *package, unsigned min_bytes)
> +void build_prepend_package_length(GArray *package)
> {
> uint8_t byte;
> unsigned length = package->len;
> @@ -183,11 +183,6 @@ void build_prepend_package_length(GArray *package, unsigned min_bytes)
> length_bytes = 4;
> }
>
> - /* Force length to at least min_bytes.
> - * This wastes memory but that's how bios did it.
> - */
> - length_bytes = MAX(length_bytes, min_bytes);
> -
> /* PkgLength is the length of the inclusive length of the data. */
> length += length_bytes;
>
> @@ -220,15 +215,15 @@ void build_prepend_package_length(GArray *package, unsigned min_bytes)
> build_prepend_byte(package, byte);
> }
>
> -void build_package(GArray *package, uint8_t op, unsigned min_bytes)
> +void build_package(GArray *package, uint8_t op)
> {
> - build_prepend_package_length(package, min_bytes);
> + build_prepend_package_length(package);
> build_prepend_byte(package, op);
> }
>
> void build_extop_package(GArray *package, uint8_t op)
> {
> - build_package(package, op, 1);
> + build_package(package, op);
> build_prepend_byte(package, 0x5B); /* ExtOpPrefix */
> }
>
> @@ -272,4 +267,3 @@ void build_append_int(GArray *table, uint32_t value)
> build_append_value(table, value, 4);
> }
> }
> -
> diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
> index e3ac1a14..a010f3b 100644
> --- a/hw/i386/acpi-build.c
> +++ b/hw/i386/acpi-build.c
> @@ -293,7 +293,7 @@ static void build_append_and_cleanup_method(GArray *device, GArray *method)
> {
> uint8_t op = 0x14; /* MethodOp */
>
> - build_package(method, op, 0);
> + build_package(method, op);
>
> build_append_array(device, method);
> build_free_array(method);
> @@ -314,7 +314,7 @@ static void build_append_notify_target_ifequal(GArray *method,
> build_append_byte(notify, 0x69); /* Arg1Op */
>
> /* Pack it up */
> - build_package(notify, op, 1);
> + build_package(notify, op);
>
> build_append_array(method, notify);
>
> @@ -827,7 +827,7 @@ static void build_pci_bus_end(PCIBus *bus, void *bus_state)
> build_append_byte(notify, 0x69); /* Arg1Op */
>
> /* Pack it up */
> - build_package(notify, op, 0);
> + build_package(notify, op);
>
> build_append_array(method, notify);
>
> @@ -868,7 +868,7 @@ static void build_pci_bus_end(PCIBus *bus, void *bus_state)
> if (bus->parent_dev) {
> build_extop_package(bus_table, op);
> } else {
> - build_package(bus_table, op, 0);
> + build_package(bus_table, op);
> }
>
> /* Append our bus description to parent table */
> @@ -1008,7 +1008,7 @@ build_ssdt(GArray *table_data, GArray *linker,
> build_append_byte(package, b);
> }
>
> - build_package(package, op, 2);
> + build_package(package, op);
> build_append_array(sb_scope, package);
> build_free_array(package);
> }
> @@ -1056,8 +1056,7 @@ build_ssdt(GArray *table_data, GArray *linker,
> build_append_array(sb_scope, hotplug_state.device_table);
> build_pci_bus_state_cleanup(&hotplug_state);
> }
> -
> - build_package(sb_scope, op, 3);
> + build_package(sb_scope, op);
> build_append_array(table_data, sb_scope);
> build_free_array(sb_scope);
> }
> diff --git a/include/hw/acpi/acpi-build-utils.h b/include/hw/acpi/acpi-build-utils.h
> index fd50625..199f003 100644
> --- a/include/hw/acpi/acpi-build-utils.h
> +++ b/include/hw/acpi/acpi-build-utils.h
> @@ -14,8 +14,8 @@ void build_append_array(GArray *array, GArray *val);
> void GCC_FMT_ATTR(2, 3)
> build_append_namestring(GArray *array, const char *format, ...);
>
> -void build_prepend_package_length(GArray *package, unsigned min_bytes);
> -void build_package(GArray *package, uint8_t op, unsigned min_bytes);
> +void build_prepend_package_length(GArray *package);
> +void build_package(GArray *package, uint8_t op);
> void build_append_value(GArray *table, uint32_t value, int size);
> void build_append_int(GArray *table, uint32_t value);
> void build_extop_package(GArray *package, uint8_t op);
>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
next prev parent reply other threads:[~2015-01-21 9:25 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-21 9:09 [Qemu-devel] [PATCH v5 0/5] pc: acpi: various fixes and cleanups Igor Mammedov
2015-01-21 9:09 ` [Qemu-devel] [PATCH v5 1/5] pc: acpi-build: cleanup AcpiPmInfo initialization Igor Mammedov
2015-01-21 9:11 ` Marcel Apfelbaum
2015-01-21 9:09 ` [Qemu-devel] [PATCH v5 2/5] acpi: move generic aml building helpers into dedictated file Igor Mammedov
2015-01-21 9:13 ` Marcel Apfelbaum
2015-01-27 12:23 ` Michael S. Tsirkin
2015-01-28 12:34 ` Igor Mammedov
2015-01-21 9:09 ` [Qemu-devel] [PATCH v5 3/5] acpi: add build_append_namestring() helper Igor Mammedov
2015-01-21 9:22 ` Marcel Apfelbaum
2015-01-21 9:09 ` [Qemu-devel] [PATCH v5 4/5] acpi: drop min-bytes in build_package() Igor Mammedov
2015-01-21 9:25 ` Marcel Apfelbaum [this message]
2015-01-21 9:09 ` [Qemu-devel] [PATCH v5 5/5] pc: acpi-build: simplify PCI bus tree generation Igor Mammedov
2015-01-21 9:51 ` Marcel Apfelbaum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54BF7073.6030005@redhat.com \
--to=marcel@redhat.com \
--cc=imammedo@redhat.com \
--cc=marcel.a@redhat.com \
--cc=mst@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).