From: chen xiao guang <chenxg@linux.vnet.ibm.com>
To: Max Reitz <mreitz@redhat.com>, qemu-devel@nongnu.org
Cc: kwolf@redhat.com, mimu@linux.vnet.ibm.com, armbru@redhat.com
Subject: Re: [Qemu-devel] [PATCH RFC v4 5/6] qemu-iotests: s390x: fix test 051
Date: Mon, 09 Feb 2015 16:06:00 +0800 [thread overview]
Message-ID: <54D86A68.9020203@linux.vnet.ibm.com> (raw)
In-Reply-To: <54D38823.2050709@redhat.com>
[-- Attachment #1: Type: text/plain, Size: 13585 bytes --]
On 02/05/2015 11:11 PM, Max Reitz wrote:
> On 2015-02-04 at 22:44, Xiao Guang Chen wrote:
>> From: Mao Chuan Li <maochuan@linux.vnet.ibm.com>
>>
>> The tests for device type "ide_cd" are skipped for the s390 platform.
>> The default device id of hard disk on the s390 platform differs to that
>> of the x86 platform. A new variable device_id is defined and "virtio0"
>> set for the s390 platform. A s390 platform specific output file is also
>> needed.
>>
>> Reviewed-by: Michael Mueller <mimu@linux.vnet.ibm.com>
>> Signed-off-by: Mao Chuan Li <maochuan@linux.vnet.ibm.com>
>> ---
>> tests/qemu-iotests/051 | 91 +++++---
>> tests/qemu-iotests/051.s390-virtio.out | 377
>> +++++++++++++++++++++++++++++++++
>> 2 files changed, 439 insertions(+), 29 deletions(-)
>> create mode 100644 tests/qemu-iotests/051.s390-virtio.out
>
> First: This patch contains lines which are too long to be sent via
> email (they are broken up and thus the patch needs manual fixup by the
> reviewers). If you could specify a public repository where we could
> pull from, that may be helpful to the reviewers.
I can not find a public repository. Do you have other options?
Or I manually split the long lines into small ones only for review. But
it will not work if you apply the patch.
>
> Second: I'm not sure whether s390-virtio should be the special case
> here. Maybe "pc" is the platform that is actually special because it
> contains a floppy drive, an IDE CD drive and so on. So while this
> patch is (nearly?) correct, it may make more sense to move 051.out to
> 051.pc.out and modify the current 051.out to be what is
> 051.s390-virtio.out in this patch.
>
OK.
> In the same way, maybe all the conditionals in this series (not just
> this patch) which check whether the machine type is s390-virtio should
> maybe instead check whether the machine type is not pc.
OK.
>
> However, the problem with the pc machine type is that
> QEMU_DEFAULT_MACHINE will be version-dependent (currently, it's
> pc-i440fx-2.3), so that would require a workaround.
>
When we run the qemu-system-x86_64 -machine ? we will get the following
output:
Supported machines are:
pc Standard PC (i440FX + PIIX, 1996) (alias of
pc-i440fx-2.3)
pc-i440fx-2.3 Standard PC (i440FX + PIIX, 1996) (default)
pc-i440fx-2.2 Standard PC (i440FX + PIIX, 1996)
pc-i440fx-2.1 Standard PC (i440FX + PIIX, 1996)
......
We can get the default machine:pc-i440fx-2.3 and the alias of the
default machine:pc.
If the default machine has an alias then we use the alias otherwise we
use the default machine.
*qemu/tests/qemu-iotests/common.config:*
/default_machine=$($QEMU -machine \? | awk '/(default)/{print $1}')//
//default_alias_machine=$($QEMU -machine \? |\//
// awk -v var_default_machine=$default_machine\)\//
// '{if
($(NF-2)=="(alias"&&$(NF-1)=="of"&&$(NF)==var_default_machine){print
$1}}')//
//if [ ! -z "$default_alias_machine" ]//; then
// default_machine="$default_alias_machine"//
fi
//export QEMU_DEFAULT_MACHINE=$default_machine/
How about this change?
> [snip]
>
>> diff --git a/tests/qemu-iotests/051.s390-virtio.out
>> b/tests/qemu-iotests/051.s390-virtio.out
>> new file mode 100644
>> index 0000000..751670f
>> --- /dev/null
>> +++ b/tests/qemu-iotests/051.s390-virtio.out
>> @@ -0,0 +1,377 @@
>> +QA output created by 051
>> +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
>> +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
>> backing_file='TEST_DIR/t.IMGFMT.base'
>> +
>> +=== Unknown option ===
>> +
>> +Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=
>> +QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=:
>> could not open disk image TEST_DIR/t.qcow2: Block format 'qcow2' used
>> by device 'virtio0' doesn't support the option 'unknown_opt'
>> +
>> +Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on
>> +QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on:
>> could not open disk image TEST_DIR/t.qcow2: Block format 'qcow2' used
>> by device 'virtio0' doesn't support the option 'unknown_opt'
>> +
>> +Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234
>> +QEMU_PROG: -drive
>> file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234: could not open
>> disk image TEST_DIR/t.qcow2: Block format 'qcow2' used by device
>> 'virtio0' doesn't support the option 'unknown_opt'
>> +
>> +Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo
>> +QEMU_PROG: -drive
>> file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo: could not open
>> disk image TEST_DIR/t.qcow2: Block format 'qcow2' used by device
>> 'virtio0' doesn't support the option 'unknown_opt'
>> +
>> +
>> +=== Unknown protocol option ===
>> +
>> +Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=
>> +QEMU_PROG: -drive
>> file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=: could not open
>> disk image TEST_DIR/t.qcow2: Block protocol 'file' doesn't support
>> the option 'unknown_opt'
>> +
>> +Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=on
>> +QEMU_PROG: -drive
>> file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=on: could not
>> open disk image TEST_DIR/t.qcow2: Block protocol 'file' doesn't
>> support the option 'unknown_opt'
>> +
>> +Testing: -drive
>> file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=1234
>> +QEMU_PROG: -drive
>> file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=1234: could not
>> open disk image TEST_DIR/t.qcow2: Block protocol 'file' doesn't
>> support the option 'unknown_opt'
>> +
>> +Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=foo
>> +QEMU_PROG: -drive
>> file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=foo: could not
>> open disk image TEST_DIR/t.qcow2: Block protocol 'file' doesn't
>> support the option 'unknown_opt'
>> +
>> +
>> +=== Invalid format ===
>> +
>> +Testing: -drive file=TEST_DIR/t.qcow2,format=foo
>> +QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=foo: 'foo' invalid
>> format
>> +
>> +Testing: -drive file=TEST_DIR/t.qcow2,driver=foo
>> +QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=foo: could not open
>> disk image TEST_DIR/t.qcow2: Unknown driver 'foo'
>> +
>> +Testing: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2
>> +QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2:
>> could not open disk image TEST_DIR/t.qcow2: Driver specified twice
>> +
>> +
>> +=== Overriding backing file ===
>> +
>> +Testing: -drive
>> file=TEST_DIR/t.qcow2,driver=qcow2,backing.file.filename=TEST_DIR/t.qcow2.orig
>> -nodefaults
>> +QEMU X.Y.Z monitor - type 'help' for more information
>> +(qemu)
>> i^[[K^[[Din^[[K^[[D^[[Dinf^[[K^[[D^[[D^[[Dinfo^[[K^[[D^[[D^[[D^[[Dinfo
>> ^[[K^[[D^[[D^[[D^[[D^[[Dinfo b^[[K^[[D^[[D^[[D^[[D^[[D^[[Dinfo
>> bl^[[K^[[D^[[D^[[D^[[D^[[D^[[D^[[Dinfo
>> blo^[[K^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[Dinfo
>> bloc^[[K^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[Dinfo block^[[K
>> +virtio0: TEST_DIR/t.qcow2 (qcow2)
>> + Backing file: TEST_DIR/t.qcow2.orig (chain depth: 1)
>> +(qemu) q^[[K^[[Dqu^[[K^[[D^[[Dqui^[[K^[[D^[[D^[[Dquit^[[K
>> +
>> +Testing: -drive
>> file=TEST_DIR/t.qcow2,driver=raw,backing.file.filename=TEST_DIR/t.qcow2.orig
>> +QEMU_PROG: -drive
>> file=TEST_DIR/t.qcow2,driver=raw,backing.file.filename=TEST_DIR/t.qcow2.orig:
>> could not open disk image TEST_DIR/t.qcow2: Driver doesn't support
>> backing files
>> +
>> +Testing: -drive
>> file=TEST_DIR/t.qcow2,file.backing.driver=file,file.backing.filename=TEST_DIR/t.qcow2.orig
>> +QEMU_PROG: -drive
>> file=TEST_DIR/t.qcow2,file.backing.driver=file,file.backing.filename=TEST_DIR/t.qcow2.orig:
>> could not open disk image TEST_DIR/t.qcow2: Driver doesn't support
>> backing files
>> +
>> +Testing: -drive
>> file=TEST_DIR/t.qcow2,file.backing.driver=qcow2,file.backing.file.filename=TEST_DIR/t.qcow2.orig
>> +QEMU_PROG: -drive
>> file=TEST_DIR/t.qcow2,file.backing.driver=qcow2,file.backing.file.filename=TEST_DIR/t.qcow2.orig:
>> could not open disk image TEST_DIR/t.qcow2: Driver doesn't support
>> backing files
>> +
>> +
>> +=== Enable and disable lazy refcounting on the command line, plus
>> some invalid values ===
>> +
>> +Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on
>> +QEMU X.Y.Z monitor - type 'help' for more information
>> +(qemu) q^[[K^[[Dqu^[[K^[[D^[[Dqui^[[K^[[D^[[D^[[Dquit^[[K
>> +
>> +Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=off
>> +QEMU X.Y.Z monitor - type 'help' for more information
>> +(qemu) q^[[K^[[Dqu^[[K^[[D^[[Dqui^[[K^[[D^[[D^[[Dquit^[[K
>> +
>> +Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=
>> +QEMU_PROG: -drive
>> file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=: could not open
>> disk image TEST_DIR/t.qcow2: Parameter 'lazy-refcounts' expects 'on'
>> or 'off'
>> +
>> +Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=42
>> +QEMU_PROG: -drive
>> file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=42: could not open
>> disk image TEST_DIR/t.qcow2: Parameter 'lazy-refcounts' expects 'on'
>> or 'off'
>> +
>> +Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=foo
>> +QEMU_PROG: -drive
>> file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=foo: could not open
>> disk image TEST_DIR/t.qcow2: Parameter 'lazy-refcounts' expects 'on'
>> or 'off'
>> +
>> +
>> +=== With version 2 images enabling lazy refcounts must fail ===
>> +
>> +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
>> +Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on
>> +QEMU_PROG: -drive
>> file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on: could not open
>> disk image TEST_DIR/t.qcow2: Lazy refcounts require a qcow2 image
>> with at least qemu 1.1 compatibility level
>> +
>> +Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=off
>> +QEMU X.Y.Z monitor - type 'help' for more information
>> +(qemu) q^[[K^[[Dqu^[[K^[[D^[[Dqui^[[K^[[D^[[D^[[Dquit^[[K
>> +
>> +
>> +=== No medium ===
>> +
>> +Testing: -drive if=floppy
>> +QEMU X.Y.Z monitor - type 'help' for more information
>> +(qemu) Warning: Orphaned drive without device:
>> id=floppy0,file=,if=floppy,bus=0,unit=0
>> +q^[[K^[[Dqu^[[K^[[D^[[Dqui^[[K^[[D^[[D^[[Dquit^[[K
>
> Can't we get rid of these warnings somehow? If nothing else works,
> filter them out?
OK.
>
> [snip]
>
>> +=== Snapshot mode ===
>> +
>> +wrote 4096/4096 bytes at offset 0
>> +4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
>> +Testing: -drive file=TEST_DIR/t.qcow2 -snapshot
>> +QEMU X.Y.Z monitor - type 'help' for more information
>> +(qemu) q^[[K^[[Dqe^[[K^[[D^[[Dqem^[[K^[[D^[[D^[[Dqemu^[[K^[[D^[[D^[[D^[[Dqemu-^[[K^[[D^[[D^[[D^[[D^[[Dqemu-i^[[K^[[D^[[D^[[D^[[D^[[D^[[Dqemu-io^[[K^[[D^[[D^[[D^[[D^[[D^[[D^[[Dqemu-io
>> ^[[K^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[Dqemu-io
>> v^[[K^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[Dqemu-io
>> vi^[[K^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[Dqemu-io
>> vir^[[K^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[Dqemu-io virt^[[K^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[Dqemu-io
>> virti^[[K^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[Dqemu-io virtio^[[K^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[Dqemu-io
>> virtio0^[[K^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[Dqemu-io virtio0 ^[[K^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[Dqemu-io
>> virtio0
>> "^[[K^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[Dqemu-io virtio0 "w^[[K^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[Dqemu-io
>> virtio0
>> "wr^[[K^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[Dqemu-io virtio0
>> "wri^[[K^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[Dqemu-io
>> virtio0
>> "writ^[[K^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D!
>> ^[[D^[[Dqemu-io virtio0
>> "write^[[K^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[Dqemu-io
>> virtio0 "write
>> ^[[K^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[Dqemu-io
>> virtio0 "write
>> -^[[K^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[Dqemu-io
>> virtio0 "write
>> -P^[[K^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[Dqemu-io
>> virtio0 "write
>> -P
>> ^[[K^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[Dqemu-io
>> virtio0
>> "write -P
>> 0^[[K^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[Dqemu-io
>> virtio0
>> "write -P
>> 0x^[[K^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[Dqemu-io
>> virtio0
>> "write -P
>> 0x2^[[K^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[Dqemu-io
>> virtio0
>> "write
>> -P
>> 0x22^[[K^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[Dqemu-io
>> virtio0 "wr!
>> ite
>> -P
>> 0x22
>> ^[[K^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[Dqemu-io
>> virtio0 "write -P 0x22 0^[[K^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[Dqemu-io
>> virtio0 "write -P 0x22 0 ^[[K^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[Dqemu-io
>> virtio0 "write -P 0x22 0 4^[[K^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[Dqemu-io
>> virtio0 "write -P 0x22 0 4k^[[K^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[D^[[Dqemu-io
>> virtio0 "write -P 0x22 0 4k"^[[K
>
> This is an example of a line that got split into multiple lines in the
> email. It's fixable by the reviewer, but that requires work. :-)
>
> Max
>
[-- Attachment #2: Type: text/html, Size: 18304 bytes --]
next prev parent reply other threads:[~2015-02-09 8:07 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-05 3:44 [Qemu-devel] [PATCH RFC v4 0/6] Update tests/qemu-iotests failing cases for the s390 platform Xiao Guang Chen
2015-02-05 3:44 ` [Qemu-devel] [PATCH RFC v4 1/6] qemu-iotests: run qemu with -nodefaults Xiao Guang Chen
2015-02-05 3:52 ` Fam Zheng
2015-02-05 5:52 ` chen xiao guang
2015-02-05 14:22 ` Max Reitz
2015-02-05 3:44 ` [Qemu-devel] [PATCH RFC v4 2/6] qemu-iotests: qemu machine type support Xiao Guang Chen
2015-02-05 14:18 ` Max Reitz
2015-02-05 17:57 ` Eric Blake
2015-02-05 3:44 ` [Qemu-devel] [PATCH RFC v4 3/6] qemu-iotests: fix tests 067, 071 and 087 Xiao Guang Chen
2015-02-05 3:44 ` [Qemu-devel] [PATCH RFC v4 4/6] qemu-iotests: s390x: fix test 041 Xiao Guang Chen
2015-02-05 14:26 ` Max Reitz
2015-02-05 3:44 ` [Qemu-devel] [PATCH RFC v4 5/6] qemu-iotests: s390x: fix test 051 Xiao Guang Chen
2015-02-05 15:11 ` Max Reitz
2015-02-09 8:06 ` chen xiao guang [this message]
2015-02-09 14:35 ` Max Reitz
2015-02-05 3:44 ` [Qemu-devel] [PATCH RFC v4 6/6] qemu-iotests: s390x: fix test 055 Xiao Guang Chen
2015-02-05 15:16 ` Max Reitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54D86A68.9020203@linux.vnet.ibm.com \
--to=chenxg@linux.vnet.ibm.com \
--cc=armbru@redhat.com \
--cc=kwolf@redhat.com \
--cc=mimu@linux.vnet.ibm.com \
--cc=mreitz@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).