From: Bin Wu <wu.wubin@huawei.com>
To: Paolo Bonzini <pbonzini@redhat.com>, qemu-devel@nongnu.org
Cc: kwolf@redhat.com, famz@redhat.com, boby.chen@huawei.com,
subo7@huawei.com, kathy.wangting@huawei.com,
rudy.zhangmin@huawei.com, arei.gonglei@huawei.com,
stefanha@redhat.com, bruce.fon@huawei.com
Subject: Re: [Qemu-devel] [PATCH v2] qemu-coroutine: segfault when restarting co_queue
Date: Tue, 10 Feb 2015 08:55:50 +0800 [thread overview]
Message-ID: <54D95716.8010300@huawei.com> (raw)
In-Reply-To: <54D87957.4060303@redhat.com>
On 2015/2/9 17:09, Paolo Bonzini wrote:
>
>
> On 09/02/2015 07:50, Bin Wu wrote:
>> From: Bin Wu <wu.wubin@huawei.com>
>>
>> We tested VMs migration with their disk images by drive_mirror. With
>> migration, two VMs copyed large files between each other. During the
>> test, a segfault occured. The stack was as follow:
>>
>> (gdb) bt
>> qemu-coroutine-lock.c:66
>> to=0x7fa5a1798648) at qemu-coroutine.c:97
>> request=0x7fa28c2ffa10, reply=0x7fa28c2ffa30, qiov=0x0, offset=0) at
>> block/nbd-client.c:165
>> sector_num=8552704, nb_sectors=2040, qiov=0x7fa5a1757468, offset=0) at
>> block/nbd-client.c:262
>> sector_num=8552704, nb_sectors=2048, qiov=0x7fa5a1757468) at
>> block/nbd-client.c:296
>> nb_sectors=2048, qiov=0x7fa5a1757468) at block/nbd.c:291
>> req=0x7fa28c2ffbb0, offset=4378984448, bytes=1048576, qiov=0x7fa5a1757468,
>> flags=0) at block.c:3321
>> offset=4378984448, bytes=1048576, qiov=0x7fa5a1757468, flags=(unknown: 0)) at
>> block.c:3447
>> sector_num=8552704, nb_sectors=2048, qiov=0x7fa5a1757468, flags=(unknown: 0)) at
>> block.c:3471
>> nb_sectors=2048, qiov=0x7fa5a1757468) at block.c:3480
>> nb_sectors=2048, qiov=0x7fa5a1757468) at block/raw_bsd.c:62
>> req=0x7fa28c2ffe30, offset=4378984448, bytes=1048576, qiov=0x7fa5a1757468,
>> flags=0) at block.c:3321
>> offset=4378984448, bytes=1048576, qiov=0x7fa5a1757468, flags=(unknown: 0)) at
>> block.c:3447
>> sector_num=8552704, nb_sectors=2048, qiov=0x7fa5a1757468, flags=(unknown: 0)) at
>> block.c:3471
>> coroutine-ucontext.c:121
>>
>> After analyzing the stack and reviewing the code, we find the
>> qemu_co_queue_run_restart should not be put in the coroutine_swap function which
>> can be invoked by qemu_coroutine_enter or qemu_coroutine_yield. Only
>> qemu_coroutine_enter needs to restart the co_queue.
>>
>> The error scenario is as follow: coroutine C1 enters C2, C2 yields
>> back to C1, then C1 ternimates and the related coroutine memory
>> becomes invalid. After a while, the C2 coroutine is entered again.
>> At this point, C1 is used as a parameter passed to
>> qemu_co_queue_run_restart. Therefore, qemu_co_queue_run_restart
>> accesses an invalid memory and a segfault error ocurrs.
>>
>> The qemu_co_queue_run_restart function re-enters coroutines waiting
>> in the co_queue. However, this function should be only used int the
>> qemu_coroutine_enter context. Only in this context, when the current
>> coroutine gets execution control again(after the execution of
>> qemu_coroutine_switch), we can restart the target coutine because the
>> target coutine has yielded back to the current coroutine or it has
>> terminated.
>
> qemu_coroutine_yield can be executed for other reasons than locks. In
> those cases, it is correct to call qemu_co_queue_run_restart. I think
> it's an NBD bug.
>
> Paolo
>
Maybe I didn't describe the error scenario clearly, but it's a normal coroutine
using case, not a NBD bug. Please reference stefan's reply, thanks.
>> First we want to put qemu_co_queue_run_restart in qemu_coroutine_enter,
>> but we find we can not access the target coroutine if it terminates.
>>
>> Signed-off-by: Bin Wu <wu.wubin@huawei.com>
>> ---
>> qemu-coroutine.c | 16 ++++++++++------
>> 1 file changed, 10 insertions(+), 6 deletions(-)
>>
>> diff --git a/qemu-coroutine.c b/qemu-coroutine.c
>> index 525247b..cc0bdfa 100644
>> --- a/qemu-coroutine.c
>> +++ b/qemu-coroutine.c
>> @@ -99,29 +99,31 @@ static void coroutine_delete(Coroutine *co)
>> qemu_coroutine_delete(co);
>> }
>>
>> -static void coroutine_swap(Coroutine *from, Coroutine *to)
>> +static CoroutineAction coroutine_swap(Coroutine *from, Coroutine *to)
>> {
>> CoroutineAction ret;
>>
>> ret = qemu_coroutine_switch(from, to, COROUTINE_YIELD);
>>
>> - qemu_co_queue_run_restart(to);
>> -
>> switch (ret) {
>> case COROUTINE_YIELD:
>> - return;
>> + break;
>> case COROUTINE_TERMINATE:
>> trace_qemu_coroutine_terminate(to);
>> + qemu_co_queue_run_restart(to);
>> coroutine_delete(to);
>> - return;
>> + break;
>> default:
>> abort();
>> }
>> +
>> + return ret;
>> }
>>
>> void qemu_coroutine_enter(Coroutine *co, void *opaque)
>> {
>> Coroutine *self = qemu_coroutine_self();
>> + CoroutineAction ret;
>>
>> trace_qemu_coroutine_enter(self, co, opaque);
>>
>> @@ -132,7 +134,9 @@ void qemu_coroutine_enter(Coroutine *co, void *opaque)
>>
>> co->caller = self;
>> co->entry_arg = opaque;
>> - coroutine_swap(self, co);
>> + ret = coroutine_swap(self, co);
>> + if (ret == COROUTINE_YIELD)
>> + qemu_co_queue_run_restart(co);
>> }
>>
>> void coroutine_fn qemu_coroutine_yield(void)
>>
>
>
> .
>
--
Bin Wu
next prev parent reply other threads:[~2015-02-10 0:56 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-09 6:50 [Qemu-devel] [PATCH v2] qemu-coroutine: segfault when restarting co_queue Bin Wu
2015-02-09 9:09 ` Paolo Bonzini
2015-02-10 0:55 ` Bin Wu [this message]
2015-02-09 9:42 ` Kevin Wolf
2015-02-09 14:48 ` Stefan Hajnoczi
2015-02-10 0:51 ` Bin Wu
2015-02-10 3:16 ` Wen Congyang
2015-02-10 3:48 ` Bin Wu
2015-02-10 4:49 ` Wen Congyang
2015-02-10 10:13 ` Kevin Wolf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54D95716.8010300@huawei.com \
--to=wu.wubin@huawei.com \
--cc=arei.gonglei@huawei.com \
--cc=boby.chen@huawei.com \
--cc=bruce.fon@huawei.com \
--cc=famz@redhat.com \
--cc=kathy.wangting@huawei.com \
--cc=kwolf@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=rudy.zhangmin@huawei.com \
--cc=stefanha@redhat.com \
--cc=subo7@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).