[Qemu-devel] [RFC PATCH v1] Include errno values in printfs for some xc_ calls.

[Qemu-devel] [RFC PATCH v1] Include errno values in printfs for some xc_ calls.

[Konrad Rzeszutek Wilk]

Hey,

I've just posted on xen-devel patches that make these two set of
xc_* function conform to the style of returning -1 for error and
stashing the Exx in errno. See:
http://lists.xen.org/archives/html/xen-devel/2015-03/msg01766.html

and
http://lists.xen.org/archives/html/xen-devel/2015-03/msg01769.html
(xc_domain_add_to_physmap fails uses do_memory_op).


 hw/xen/xen_pt.c     | 4 ++--
 hw/xen/xen_pt_msi.c | 4 ++--
 xen-hvm.c           | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

[Qemu-devel] [PATCH RFC v1 1/2] xen/hw/passthrough: Use errno instead of ret for xc_physdev_map_* calls

[Konrad Rzeszutek Wilk]

As the libxc library follows (mostly) the return negative
for failure and stashes the error value in errno.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 hw/xen/xen_pt.c     | 4 ++--
 hw/xen/xen_pt_msi.c | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/hw/xen/xen_pt.c b/hw/xen/xen_pt.c
index c1bf357..d2c187d 100644
--- a/hw/xen/xen_pt.c
+++ b/hw/xen/xen_pt.c
@@ -691,8 +691,8 @@ static int xen_pt_initfn(PCIDevice *d)
     rc = xc_physdev_map_pirq(xen_xc, xen_domid, machine_irq, &pirq);
 
     if (rc < 0) {
-        XEN_PT_ERR(d, "Mapping machine irq %u to pirq %i failed, (rc: %d)\n",
-                   machine_irq, pirq, rc);
+        XEN_PT_ERR(d, "Mapping machine irq %u to pirq %i failed, (err: %d)\n",
+                   machine_irq, pirq, errno);
 
         /* Disable PCI intx assertion (turn on bit10 of devctl) */
         xen_host_pci_set_word(&s->real_device,
diff --git a/hw/xen/xen_pt_msi.c b/hw/xen/xen_pt_msi.c
index 9ed9321..b01921a 100644
--- a/hw/xen/xen_pt_msi.c
+++ b/hw/xen/xen_pt_msi.c
@@ -132,8 +132,8 @@ static int msi_msix_setup(XenPCIPassthroughState *s,
                                      msix_entry, table_base);
         if (rc) {
             XEN_PT_ERR(&s->dev,
-                       "Mapping of MSI%s (rc: %i, vec: %#x, entry %#x)\n",
-                       is_msix ? "-X" : "", rc, gvec, msix_entry);
+                       "Mapping of MSI%s (err: %i, vec: %#x, entry %#x)\n",
+                       is_msix ? "-X" : "", errno, gvec, msix_entry);
             return rc;
         }
     }
-- 
2.1.0

[Qemu-devel] [PATCH RFC v1 2/2] xen-hvm: When using xc_domain_add_to_physmap also include errno when reporting

[Konrad Rzeszutek Wilk]

.errors - as it will most likely have the proper error value.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 xen-hvm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/xen-hvm.c b/xen-hvm.c
index 7548794..3d6fed3 100644
--- a/xen-hvm.c
+++ b/xen-hvm.c
@@ -348,7 +348,7 @@ go_physmap:
         rc = xc_domain_add_to_physmap(xen_xc, xen_domid, XENMAPSPACE_gmfn, idx, gpfn);
         if (rc) {
             DPRINTF("add_to_physmap MFN %"PRI_xen_pfn" to PFN %"
-                    PRI_xen_pfn" failed: %d\n", idx, gpfn, rc);
+                    PRI_xen_pfn" failed: %d (errno: %d)\n", idx, gpfn, rc, errno);
             return -rc;
         }
     }
@@ -425,7 +425,7 @@ static int xen_remove_from_physmap(XenIOState *state,
         rc = xc_domain_add_to_physmap(xen_xc, xen_domid, XENMAPSPACE_gmfn, idx, gpfn);
         if (rc) {
             fprintf(stderr, "add_to_physmap MFN %"PRI_xen_pfn" to PFN %"
-                    PRI_xen_pfn" failed: %d\n", idx, gpfn, rc);
+                    PRI_xen_pfn" failed: %d (errno: %d)\n", idx, gpfn, rc, errno);
             return -rc;
         }
     }
-- 
2.1.0

Re: [Qemu-devel] [RFC PATCH v1] Include errno values in printfs for some xc_ calls.

[Patchew Tool]

This series passed Patchew automatic testing, but there are some warnings.

Find the log fragments below, or open the following URL to see the full log:

http://qemu.patchew.org/testing/log/<1426275418-8411-1-git-send-email-konrad.wilk@oracle.com>

----------8<---------

docker run --net=none -v /var/tmp/patchew-tester/tmpJLu77j:/var/tmp/patchew-test patchew:fedora-20 timeout 3600 /var/tmp/patchew-test/qemu-devel.sh /var/tmp/patchew-test

*** Testing 'coding style check' ***

Checking 0001-xen-hw-passthrough--Use-errno-instead-of-ret-for-xc_physdev_map_--calls.patch
total: 0 errors, 0 warnings, 20 lines checked

0001-xen-hw-passthrough--Use-errno-instead-of-ret-for-xc_physdev_map_--calls.patch has no obvious style problems and is ready for submission.

Checking 0002-xen-hvm--When-using-xc_domain_add_to_physmap-also-include-errno-when-reporting.patch
command failed with exit code 0
$@
WARNING: line over 80 characters
#17: FILE: xen-hvm.c:351:
+                    PRI_xen_pfn" failed: %d (errno: %d)\n", idx, gpfn, rc, errno);

WARNING: line over 80 characters
#26: FILE: xen-hvm.c:428:
+                    PRI_xen_pfn" failed: %d (errno: %d)\n", idx, gpfn, rc, errno);

total: 0 errors, 2 warnings, 16 lines checked

0002-xen-hvm--When-using-xc_domain_add_to_physmap-also-include-errno-when-reporting.patch has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.


*** Testing 'configure' ***

Install prefix    /usr/local
BIOS directory    /usr/local/share/qemu
binary directory  /usr/local/bin
library directory /usr/local/lib
module directory  /usr/local/lib/qemu
libexec directory /usr/local/libexec

Re: [Qemu-devel] [PATCH RFC v1 1/2] xen/hw/passthrough: Use errno instead of ret for xc_physdev_map_* calls

[Stefano Stabellini]

On Fri, 13 Mar 2015, Konrad Rzeszutek Wilk wrote:
> As the libxc library follows (mostly) the return negative
> for failure and stashes the error value in errno.
> 
> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>

I'll add it to my queue


>  hw/xen/xen_pt.c     | 4 ++--
>  hw/xen/xen_pt_msi.c | 4 ++--
>  2 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/hw/xen/xen_pt.c b/hw/xen/xen_pt.c
> index c1bf357..d2c187d 100644
> --- a/hw/xen/xen_pt.c
> +++ b/hw/xen/xen_pt.c
> @@ -691,8 +691,8 @@ static int xen_pt_initfn(PCIDevice *d)
>      rc = xc_physdev_map_pirq(xen_xc, xen_domid, machine_irq, &pirq);
>  
>      if (rc < 0) {
> -        XEN_PT_ERR(d, "Mapping machine irq %u to pirq %i failed, (rc: %d)\n",
> -                   machine_irq, pirq, rc);
> +        XEN_PT_ERR(d, "Mapping machine irq %u to pirq %i failed, (err: %d)\n",
> +                   machine_irq, pirq, errno);
>  
>          /* Disable PCI intx assertion (turn on bit10 of devctl) */
>          xen_host_pci_set_word(&s->real_device,
> diff --git a/hw/xen/xen_pt_msi.c b/hw/xen/xen_pt_msi.c
> index 9ed9321..b01921a 100644
> --- a/hw/xen/xen_pt_msi.c
> +++ b/hw/xen/xen_pt_msi.c
> @@ -132,8 +132,8 @@ static int msi_msix_setup(XenPCIPassthroughState *s,
>                                       msix_entry, table_base);
>          if (rc) {
>              XEN_PT_ERR(&s->dev,
> -                       "Mapping of MSI%s (rc: %i, vec: %#x, entry %#x)\n",
> -                       is_msix ? "-X" : "", rc, gvec, msix_entry);
> +                       "Mapping of MSI%s (err: %i, vec: %#x, entry %#x)\n",
> +                       is_msix ? "-X" : "", errno, gvec, msix_entry);
>              return rc;
>          }
>      }
> -- 
> 2.1.0
> 

Re: [Qemu-devel] [PATCH RFC v1 2/2] xen-hvm: When using xc_domain_add_to_physmap also include errno when reporting

[Stefano Stabellini]

On Fri, 13 Mar 2015, Konrad Rzeszutek Wilk wrote:
> .errors - as it will most likely have the proper error value.
> 
> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>


>  xen-hvm.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/xen-hvm.c b/xen-hvm.c
> index 7548794..3d6fed3 100644
> --- a/xen-hvm.c
> +++ b/xen-hvm.c
> @@ -348,7 +348,7 @@ go_physmap:
>          rc = xc_domain_add_to_physmap(xen_xc, xen_domid, XENMAPSPACE_gmfn, idx, gpfn);
>          if (rc) {
>              DPRINTF("add_to_physmap MFN %"PRI_xen_pfn" to PFN %"
> -                    PRI_xen_pfn" failed: %d\n", idx, gpfn, rc);
> +                    PRI_xen_pfn" failed: %d (errno: %d)\n", idx, gpfn, rc, errno);
>              return -rc;
>          }
>      }
> @@ -425,7 +425,7 @@ static int xen_remove_from_physmap(XenIOState *state,
>          rc = xc_domain_add_to_physmap(xen_xc, xen_domid, XENMAPSPACE_gmfn, idx, gpfn);
>          if (rc) {
>              fprintf(stderr, "add_to_physmap MFN %"PRI_xen_pfn" to PFN %"
> -                    PRI_xen_pfn" failed: %d\n", idx, gpfn, rc);
> +                    PRI_xen_pfn" failed: %d (errno: %d)\n", idx, gpfn, rc, errno);
>              return -rc;
>          }
>      }
> -- 
> 2.1.0
> 

Re: [Qemu-devel] [PATCH RFC v1 1/2] xen/hw/passthrough: Use errno instead of ret for xc_physdev_map_* calls

[Konrad Rzeszutek Wilk]

On Mon, Mar 16, 2015 at 10:13:50AM +0000, Stefano Stabellini wrote:
> On Fri, 13 Mar 2015, Konrad Rzeszutek Wilk wrote:
> > As the libxc library follows (mostly) the return negative
> > for failure and stashes the error value in errno.
> > 
> > Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> 
> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
> 
> I'll add it to my queue

Thank you.
> 
> 
> >  hw/xen/xen_pt.c     | 4 ++--
> >  hw/xen/xen_pt_msi.c | 4 ++--
> >  2 files changed, 4 insertions(+), 4 deletions(-)
> > 
> > diff --git a/hw/xen/xen_pt.c b/hw/xen/xen_pt.c
> > index c1bf357..d2c187d 100644
> > --- a/hw/xen/xen_pt.c
> > +++ b/hw/xen/xen_pt.c
> > @@ -691,8 +691,8 @@ static int xen_pt_initfn(PCIDevice *d)
> >      rc = xc_physdev_map_pirq(xen_xc, xen_domid, machine_irq, &pirq);
> >  
> >      if (rc < 0) {
> > -        XEN_PT_ERR(d, "Mapping machine irq %u to pirq %i failed, (rc: %d)\n",
> > -                   machine_irq, pirq, rc);
> > +        XEN_PT_ERR(d, "Mapping machine irq %u to pirq %i failed, (err: %d)\n",
> > +                   machine_irq, pirq, errno);
> >  
> >          /* Disable PCI intx assertion (turn on bit10 of devctl) */
> >          xen_host_pci_set_word(&s->real_device,
> > diff --git a/hw/xen/xen_pt_msi.c b/hw/xen/xen_pt_msi.c
> > index 9ed9321..b01921a 100644
> > --- a/hw/xen/xen_pt_msi.c
> > +++ b/hw/xen/xen_pt_msi.c
> > @@ -132,8 +132,8 @@ static int msi_msix_setup(XenPCIPassthroughState *s,
> >                                       msix_entry, table_base);
> >          if (rc) {
> >              XEN_PT_ERR(&s->dev,
> > -                       "Mapping of MSI%s (rc: %i, vec: %#x, entry %#x)\n",
> > -                       is_msix ? "-X" : "", rc, gvec, msix_entry);
> > +                       "Mapping of MSI%s (err: %i, vec: %#x, entry %#x)\n",
> > +                       is_msix ? "-X" : "", errno, gvec, msix_entry);
> >              return rc;
> >          }
> >      }
> > -- 
> > 2.1.0
> >