qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Laszlo Ersek <lersek@redhat.com>
To: "Leveille, Paul" <Paul.Leveille@stratus.com>,
	'Paolo Bonzini' <pbonzini@redhat.com>,
	"qemu-devel@nongnu.org" <qemu-devel@nongnu.org>
Cc: "stefanha@redhat.com" <stefanha@redhat.com>
Subject: Re: [Qemu-devel] [PATCH] aio: strengthen memory barriers for bottom half scheduling
Date: Wed, 08 Apr 2015 11:53:08 +0200	[thread overview]
Message-ID: <5524FA84.10007@redhat.com> (raw)
In-Reply-To: <84E676B2D50CD441955FB9992BB861809325DD5F@EXHQ1.corp.stratus.com>

On 04/07/15 20:20, Leveille, Paul wrote:
> Paolo,
> 
> I've applied your patch in place of my prototype patch and, as expected, it's working fine. Thanks!

I also tested the patch (on top of 5a24f20a72), and on aarch64 it
doesn't fix the hang.

If there's interest, I can write up the reproducer using public /
upstream components only. (It's a bit messy because you have to use
Gerd's AAVMF build, or build it yourself.) There are other reproducers
too, of course, but the one with AAVMF is very reliable, and it needs
very little custom stuff to set up.

Thanks
Laszlo

> -----Original Message-----
> From: Paolo Bonzini [mailto:pbonzini@redhat.com] 
> Sent: Tuesday, April 07, 2015 11:16 AM
> To: qemu-devel@nongnu.org
> Cc: lersek@redhat.com; Leveille, Paul; stefanha@redhat.com
> Subject: [PATCH] aio: strengthen memory barriers for bottom half scheduling
> 
> There are two problems with memory barriers in async.c.  The fix is to use atomic_xchg in order to achieve sequential consistency between the scheduling of a bottom half and the corresponding execution.
> 
> First, if bh->scheduled is already 1 in qemu_bh_schedule, QEMU does not execute a memory barrier to order any writes needed by the callback before the read of bh->scheduled.  If the other side sees req->state as THREAD_ACTIVE, the callback is not invoked and you get deadlock.
> 
> Second, the memory barrier in aio_bh_poll is too weak.  Without this patch, it is possible that bh->scheduled = 0 is not "published" until after the callback has returned.  Another thread wants to schedule the bottom half, but it sees bh->scheduled = 1 and does nothing.  This causes a lost wakeup.  The memory barrier should have been changed to smp_mb() in commit 924fe12 (aio: fix qemu_bh_schedule() bh->ctx race condition,
> 2014-06-03) together with qemu_bh_schedule()'s.  Guess who reviewed that patch?
> 
> Both of these involve a store and a load, so they are reproducible on
> x86_64 as well.  It is however much easier on aarch64, where the libguestfs test suite triggers the bug fairly easily.  Even there the failure can go away or appear depending on compiler optimization level, tracing options, or even kernel debugging options.
> 
> Paul Leveille however reported how to trigger the problem within 15 minutes on x86_64 as well.  His (untested) recipe, reproduced here for reference, is the following:
> 
>    1) Qcow2 (or 3) is critical – raw files alone seem to avoid the problem.
> 
>    2) Use “cache=directsync” rather than the default of
>    “cache=none” to make it happen easier.
> 
>    3) Use a server with a write-back RAID controller to allow for rapid
>    IO rates.
> 
>    4) Run a random-access load that (mostly) writes chunks to various
>    files on the virtual block device.
> 
>       a. I use ‘diskload.exe c:25’, a Microsoft HCT load
>          generator, on Windows VMs.
> 
>       b. Iometer can probably be configured to generate a similar load.
> 
>    5) Run multiple VMs in parallel, against the same storage device,
>    to shake the failure out sooner.
> 
>    6) IvyBridge and Haswell processors for certain; not sure about others.
> 
> A similar patch survived over 12 hours of testing, where an unpatched QEMU would fail within 15 minutes.
> 
> This bug is, most likely, also the cause of failures in the libguestfs testsuite on AArch64.
> 
> Thanks to Laszlo Ersek for initially reporting this bug, to Stefan Hajnoczi for suggesting closer examination of qemu_bh_schedule, and to Paul for providing test input and a prototype patch.
> 
> Reported-by: Laszlo Ersek <lersek@redhat.com>
> Reported-by: Paul Leveille <Paul.Leveille@stratus.com>
> Reported-by: John Snow <jsnow@redhat.com>
> Suggested-by: Paul Leveille <Paul.Leveille@stratus.com>
> Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
> ---
>         Not yet tested on AArch64, will do it tomorrow.  Paul, it would
>         be great if you could test this patch too!
> 
>  async.c | 28 ++++++++++++----------------
>  1 file changed, 12 insertions(+), 16 deletions(-)
> 
> diff --git a/async.c b/async.c
> index 2be88cc..2b51e87 100644
> --- a/async.c
> +++ b/async.c
> @@ -72,12 +72,13 @@ int aio_bh_poll(AioContext *ctx)
>          /* Make sure that fetching bh happens before accessing its members */
>          smp_read_barrier_depends();
>          next = bh->next;
> -        if (!bh->deleted && bh->scheduled) {
> -            bh->scheduled = 0;
> -            /* Paired with write barrier in bh schedule to ensure reading for
> -             * idle & callbacks coming after bh's scheduling.
> -             */
> -            smp_rmb();
> +        /* The atomic_xchg is paired with the one in qemu_bh_schedule.  The
> +         * implicit memory barrier ensures that the callback sees all writes
> +         * done by the scheduling thread.  It also ensures that the scheduling
> +         * thread sees the zero before bh->cb has run, and thus will call
> +         * aio_notify again if necessary.
> +         */
> +        if (!bh->deleted && atomic_xchg(&bh->scheduled, 0)) {
>              if (!bh->idle)
>                  ret = 1;
>              bh->idle = 0;
> @@ -108,33 +109,28 @@ int aio_bh_poll(AioContext *ctx)
>  
>  void qemu_bh_schedule_idle(QEMUBH *bh)
>  {
> -    if (bh->scheduled)
> -        return;
>      bh->idle = 1;
>      /* Make sure that idle & any writes needed by the callback are done
>       * before the locations are read in the aio_bh_poll.
>       */
> -    smp_wmb();
> -    bh->scheduled = 1;
> +    atomic_mb_set(&bh->scheduled, 1);
>  }
>  
>  void qemu_bh_schedule(QEMUBH *bh)
>  {
>      AioContext *ctx;
>  
> -    if (bh->scheduled)
> -        return;
>      ctx = bh->ctx;
>      bh->idle = 0;
> -    /* Make sure that:
> +    /* The memory barrier implicit in atomic_xchg makes sure that:
>       * 1. idle & any writes needed by the callback are done before the
>       *    locations are read in the aio_bh_poll.
>       * 2. ctx is loaded before scheduled is set and the callback has a chance
>       *    to execute.
>       */
> -    smp_mb();
> -    bh->scheduled = 1;
> -    aio_notify(ctx);
> +    if (atomic_xchg(&bh->scheduled, 1) == 0) {
> +        aio_notify(ctx);
> +    }
>  }
>  
>  
> --
> 2.3.4
> 

  reply	other threads:[~2015-04-08  9:53 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-07 15:16 [Qemu-devel] [PATCH] aio: strengthen memory barriers for bottom half scheduling Paolo Bonzini
2015-04-07 18:20 ` Leveille, Paul
2015-04-08  9:53   ` Laszlo Ersek [this message]
2015-04-08 10:15 ` Richard W.M. Jones
2015-04-08 10:34   ` Laszlo Ersek
2015-04-08 15:06 ` Stefan Hajnoczi
  -- strict thread matches above, loose matches on Subject: below --
2015-04-09  9:21 Paolo Bonzini
2015-04-09  9:29 ` Stefan Hajnoczi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5524FA84.10007@redhat.com \
    --to=lersek@redhat.com \
    --cc=Paul.Leveille@stratus.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).