[Qemu-devel] [PATCH 08/11] qemu-iotests: add no-op streaming test

[Qemu-devel] [PATCH 08/11] qemu-iotests: add no-op streaming test

[Alberto Garcia]

This patch updates test_stream_partial() to test that the block-stream
operation never copies data from the image specified as base.

Signed-off-by: Alberto Garcia <berto@igalia.com>
---
 tests/qemu-iotests/030 | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/tests/qemu-iotests/030 b/tests/qemu-iotests/030
index 6e6cb5a..a395a03 100755
--- a/tests/qemu-iotests/030
+++ b/tests/qemu-iotests/030
@@ -94,6 +94,19 @@ class TestSingleDrive(iotests.QMPTestCase):
     def test_stream_partial(self):
         self.assert_no_active_block_jobs()
 
+        # This is a no-op: no data should ever be copied from the base image
+        result = self.vm.qmp('block-stream', device='drive0', base=mid_img)
+        self.assert_qmp(result, 'return', {})
+
+        self.wait_until_completed()
+
+        self.assert_no_active_block_jobs()
+
+        self.assertNotEqual(qemu_io('-f', iotests.imgfmt, '-c', 'map', mid_img),
+                            qemu_io('-f', iotests.imgfmt, '-c', 'map', test_img),
+                            'image file map matches backing file after a no-op')
+
+        # And this is the operation that actually copies data
         result = self.vm.qmp('block-stream', device='drive0', base=backing_img)
         self.assert_qmp(result, 'return', {})
 
-- 
2.1.4

Re: [Qemu-devel] [PATCH 08/11] qemu-iotests: add no-op streaming test

[Max Reitz]

On 24.04.2015 13:40, Alberto Garcia wrote:
> This patch updates test_stream_partial() to test that the block-stream
> operation never copies data from the image specified as base.
>
> Signed-off-by: Alberto Garcia <berto@igalia.com>
> ---
>   tests/qemu-iotests/030 | 13 +++++++++++++
>   1 file changed, 13 insertions(+)

I think it would be better to add this as an own test case. But I won't 
oppose adding it as a special case of test_stream_partial either, 
because strictly speaking, streaming nothing is a special case of 
streaming partially.

> diff --git a/tests/qemu-iotests/030 b/tests/qemu-iotests/030
> index 6e6cb5a..a395a03 100755
> --- a/tests/qemu-iotests/030
> +++ b/tests/qemu-iotests/030
> @@ -94,6 +94,19 @@ class TestSingleDrive(iotests.QMPTestCase):
>       def test_stream_partial(self):
>           self.assert_no_active_block_jobs()
>   
> +        # This is a no-op: no data should ever be copied from the base image
> +        result = self.vm.qmp('block-stream', device='drive0', base=mid_img)
> +        self.assert_qmp(result, 'return', {})
> +
> +        self.wait_until_completed()
> +
> +        self.assert_no_active_block_jobs()
> +
> +        self.assertNotEqual(qemu_io('-f', iotests.imgfmt, '-c', 'map', mid_img),
> +                            qemu_io('-f', iotests.imgfmt, '-c', 'map', test_img),
> +                            'image file map matches backing file after a no-op')

Well, you haven't really proven anything by doing this, except that the 
mid_img hasn't been streamed completely into test_img... What you want 
to prove is that test_img is empty after streaming, right? This can be 
done by either comparing against an empty image specifically created for 
this single test, or by comparing the qemu_io map output against 
"[                       0]     2048/ 2048 sectors not allocated at 
offset 0 bytes (0)\n", which should be the map output for every empty 1 
MB image (regardless of format, and so on).

Max

> +
> +        # And this is the operation that actually copies data
>           result = self.vm.qmp('block-stream', device='drive0', base=backing_img)
>           self.assert_qmp(result, 'return', {})

Re: [Qemu-devel] [PATCH 08/11] qemu-iotests: add no-op streaming test

[Alberto Garcia]

On Fri 24 Apr 2015 03:19:54 PM CEST, Max Reitz wrote:

>> This patch updates test_stream_partial() to test that the
>> block-stream operation never copies data from the image specified as
>> base.
>
> I think it would be better to add this as an own test case. But I
> won't oppose adding it as a special case of test_stream_partial
> either, because strictly speaking, streaming nothing is a special case
> of streaming partially.

That was the idea, but of course it can be moved to a new test, it's
also fine with me.

>> +        self.assertNotEqual(qemu_io('-f', iotests.imgfmt, '-c', 'map', mid_img),
>> +                            qemu_io('-f', iotests.imgfmt, '-c', 'map', test_img),
>> +                            'image file map matches backing file after a no-op')
>
> Well, you haven't really proven anything by doing this, except that
> the mid_img hasn't been streamed completely into test_img... What you
> want to prove is that test_img is empty after streaming, right?

That's right, but what scenario would that be? A streaming operation
that is completed without errors and leaves partial data on the
destination image?

There's only 512 bytes written in mid_img for this test case. If we
suspect that it can go wrong maybe we should start comparing more things
than just the qemu_io map output...

Berto

Re: [Qemu-devel] [PATCH 08/11] qemu-iotests: add no-op streaming test

[Max Reitz]

On 24.04.2015 15:55, Alberto Garcia wrote:
> On Fri 24 Apr 2015 03:19:54 PM CEST, Max Reitz wrote:
>
>>> This patch updates test_stream_partial() to test that the
>>> block-stream operation never copies data from the image specified as
>>> base.
>> I think it would be better to add this as an own test case. But I
>> won't oppose adding it as a special case of test_stream_partial
>> either, because strictly speaking, streaming nothing is a special case
>> of streaming partially.
> That was the idea, but of course it can be moved to a new test, it's
> also fine with me.
>
>>> +        self.assertNotEqual(qemu_io('-f', iotests.imgfmt, '-c', 'map', mid_img),
>>> +                            qemu_io('-f', iotests.imgfmt, '-c', 'map', test_img),
>>> +                            'image file map matches backing file after a no-op')
>> Well, you haven't really proven anything by doing this, except that
>> the mid_img hasn't been streamed completely into test_img... What you
>> want to prove is that test_img is empty after streaming, right?
> That's right, but what scenario would that be? A streaming operation
> that is completed without errors and leaves partial data on the
> destination image?

That would be a bug. Which is what the tests are for. :-)

Max

> There's only 512 bytes written in mid_img for this test case. If we
> suspect that it can go wrong maybe we should start comparing more things
> than just the qemu_io map output...
>
> Berto

[Qemu-devel] [PATCH v6 00/11] Support streaming to an intermediate layer

[Alberto Garcia]

v6:
- fix the no-op test following Max's suggestions

v5: https://lists.gnu.org/archive/html/qemu-devel/2015-04/msg03006.html
- Fix a few typos
- Minor documentation updates
- Update test_stream_partial() to test no-ops
- New test case: test_stream_parallel()
- New test case: test_stream_overlapping()

v4: https://lists.gnu.org/archive/html/qemu-devel/2015-04/msg01878.html
- Refactor find_block_job to use the error from bdrv_lookup_bs()
- Don't use QERR_DEVICE_IN_USE in block_job_create() since we can be
  dealing with nodes now.
- Fix @device comment in the BlockJobInfo documentation
- stream_start(): simplify the bdrv_reopen() call and use
  bdrv_get_device_or_node_name() for error messages.
- Use a different variable name for BlockDriverState *i
- Documentation fixes in docs/live-block-ops.txt
- Update iotest 30 since now test_device_not_found() returns
  GenericError
- Fix test case test_stream_partial()
- Add new test case test_stream_intermediate()
- Fix typos

v3: https://lists.gnu.org/archive/html/qemu-devel/2015-04/msg00806.html
- Keep a list of block jobs and make qmp_query_block_jobs() iterate
  over it.

v2: https://lists.gnu.org/archive/html/qemu-devel/2015-03/msg04798.html
- The 'block-stream' command does not have a 'node-name' parameter
  anymore and reuses 'device' for that purpose.
- Block jobs can now be owned by any intermediate node, and not just
  by the ones at the root. query-block-jobs is updated to reflect that
  change.
- The 'device' parameter of all 'block-job-*' commands can now take a
  node name.
- The BlockJobInfo type and all BLOCK_JOB_* events report the node
  name in the 'device' field if the node does not have a device name.
- All intermediate nodes are blocked (and checked for blockers) during
  the streaming operation.

Alberto Garcia (11):
  block: keep a list of block jobs
  block: allow block jobs in any arbitrary node
  block: never cancel a streaming job without running stream_complete()
  block: Support streaming to an intermediate layer
  block: Add QMP support for streaming to an intermediate layer
  docs: Document how to stream to an intermediate layer
  qemu-iotests: fix test_stream_partial()
  qemu-iotests: add no-op streaming test
  qemu-iotests: test streaming to an intermediate layer
  qemu-iotests: test block-stream operations in parallel
  qemu-iotests: test overlapping block-stream operations

 block.c                    |   4 +-
 block/mirror.c             |   5 +-
 block/stream.c             |  44 ++++++++++++--
 blockdev.c                 |  55 ++++++++---------
 blockjob.c                 |  31 +++++++---
 docs/live-block-ops.txt    |  31 ++++++----
 docs/qmp/qmp-events.txt    |   8 +--
 include/block/blockjob.h   |  14 +++++
 include/qapi/qmp/qerror.h  |   3 -
 qapi/block-core.json       |  30 +++++----
 tests/qemu-iotests/030     | 148 ++++++++++++++++++++++++++++++++++++++++++++-
 tests/qemu-iotests/030.out |   4 +-
 12 files changed, 296 insertions(+), 81 deletions(-)

-- 
2.1.4

[Qemu-devel] [PATCH 01/11] block: keep a list of block jobs

[Alberto Garcia]

The current way to obtain the list of existing block jobs is to
iterate over all root nodes and check which ones own a job.

Since we want to be able to support block jobs in other nodes as well,
this patch keeps a list of jobs that is updated every time one is
created or destroyed.

This also updates qmp_query_block_jobs() to use this new list.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
 blockdev.c               | 19 ++++++++-----------
 blockjob.c               | 13 +++++++++++++
 include/block/blockjob.h | 14 ++++++++++++++
 3 files changed, 35 insertions(+), 11 deletions(-)

diff --git a/blockdev.c b/blockdev.c
index 30dc9d2..567d5e3 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -2901,21 +2901,18 @@ fail:
 BlockJobInfoList *qmp_query_block_jobs(Error **errp)
 {
     BlockJobInfoList *head = NULL, **p_next = &head;
-    BlockDriverState *bs;
+    BlockJob *job;
 
-    for (bs = bdrv_next(NULL); bs; bs = bdrv_next(bs)) {
-        AioContext *aio_context = bdrv_get_aio_context(bs);
+    for (job = block_job_next(NULL); job; job = block_job_next(job)) {
+        BlockJobInfoList *elem = g_new0(BlockJobInfoList, 1);
+        AioContext *aio_context = bdrv_get_aio_context(job->bs);
 
         aio_context_acquire(aio_context);
-
-        if (bs->job) {
-            BlockJobInfoList *elem = g_new0(BlockJobInfoList, 1);
-            elem->value = block_job_query(bs->job);
-            *p_next = elem;
-            p_next = &elem->next;
-        }
-
+        elem->value = block_job_query(job);
         aio_context_release(aio_context);
+
+        *p_next = elem;
+        p_next = &elem->next;
     }
 
     return head;
diff --git a/blockjob.c b/blockjob.c
index ba2255d..562362b 100644
--- a/blockjob.c
+++ b/blockjob.c
@@ -35,6 +35,16 @@
 #include "qemu/timer.h"
 #include "qapi-event.h"
 
+static QLIST_HEAD(, BlockJob) block_jobs = QLIST_HEAD_INITIALIZER(block_jobs);
+
+BlockJob *block_job_next(BlockJob *job)
+{
+    if (!job) {
+        return QLIST_FIRST(&block_jobs);
+    }
+    return QLIST_NEXT(job, job_list);
+}
+
 void *block_job_create(const BlockJobDriver *driver, BlockDriverState *bs,
                        int64_t speed, BlockCompletionFunc *cb,
                        void *opaque, Error **errp)
@@ -73,6 +83,8 @@ void *block_job_create(const BlockJobDriver *driver, BlockDriverState *bs,
             return NULL;
         }
     }
+
+    QLIST_INSERT_HEAD(&block_jobs, job, job_list);
     return job;
 }
 
@@ -85,6 +97,7 @@ void block_job_completed(BlockJob *job, int ret)
     bs->job = NULL;
     bdrv_op_unblock_all(bs, job->blocker);
     error_free(job->blocker);
+    QLIST_REMOVE(job, job_list);
     g_free(job);
 }
 
diff --git a/include/block/blockjob.h b/include/block/blockjob.h
index b6d4ebb..636204b 100644
--- a/include/block/blockjob.h
+++ b/include/block/blockjob.h
@@ -96,6 +96,9 @@ struct BlockJob {
      */
     bool ready;
 
+    /** Element of the list of block jobs */
+    QLIST_ENTRY(BlockJob) job_list;
+
     /** Status that is published by the query-block-jobs QMP API */
     BlockDeviceIoStatus iostatus;
 
@@ -119,6 +122,17 @@ struct BlockJob {
 };
 
 /**
+ * block_job_next:
+ * @job: A block job, or %NULL.
+ *
+ * Get the next element from the list of block jobs after @job, or the
+ * first one if @job is %NULL.
+ *
+ * Returns the requested job, or %NULL if there are no more jobs left.
+ */
+BlockJob *block_job_next(BlockJob *job);
+
+/**
  * block_job_create:
  * @job_type: The class object for the newly-created job.
  * @bs: The block
-- 
2.1.4

[Qemu-devel] [PATCH 02/11] block: allow block jobs in any arbitrary node

[Alberto Garcia]

Currently, block jobs can only be owned by root nodes. This patch
allows block jobs to be in any arbitrary node, by making the following
changes:

- Block jobs can now be identified by the node name of their
  BlockDriverState in addition to the device name. Since both device
  and node names live in the same namespace there's no ambiguity.

- The "device" parameter used by all commands that operate on block
  jobs can also be a node name now.

- The node name is used as a fallback to fill in the BlockJobInfo
  structure and all BLOCK_JOB_* events if there is no device name for
  that job.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
 block/mirror.c            |  5 +++--
 blockdev.c                | 16 ++++++++--------
 blockjob.c                | 18 ++++++++++--------
 docs/qmp/qmp-events.txt   |  8 ++++----
 include/qapi/qmp/qerror.h |  3 ---
 qapi/block-core.json      | 20 ++++++++++----------
 6 files changed, 35 insertions(+), 35 deletions(-)

diff --git a/block/mirror.c b/block/mirror.c
index 4056164..189e8f8 100644
--- a/block/mirror.c
+++ b/block/mirror.c
@@ -607,8 +607,9 @@ static void mirror_complete(BlockJob *job, Error **errp)
         return;
     }
     if (!s->synced) {
-        error_set(errp, QERR_BLOCK_JOB_NOT_READY,
-                  bdrv_get_device_name(job->bs));
+        error_setg(errp,
+                   "The active block job for device '%s' cannot be completed",
+                   bdrv_get_device_name(job->bs));
         return;
     }
 
diff --git a/blockdev.c b/blockdev.c
index 567d5e3..677432f 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -2643,32 +2643,32 @@ out:
     aio_context_release(aio_context);
 }
 
-/* Get the block job for a given device name and acquire its AioContext */
-static BlockJob *find_block_job(const char *device, AioContext **aio_context,
+/* Get the block job for a given device or node name
+ * and acquire its AioContext */
+static BlockJob *find_block_job(const char *device_or_node,
+                                AioContext **aio_context,
                                 Error **errp)
 {
-    BlockBackend *blk;
     BlockDriverState *bs;
 
-    blk = blk_by_name(device);
-    if (!blk) {
+    bs = bdrv_lookup_bs(device_or_node, device_or_node, errp);
+    if (!bs) {
         goto notfound;
     }
-    bs = blk_bs(blk);
 
     *aio_context = bdrv_get_aio_context(bs);
     aio_context_acquire(*aio_context);
 
     if (!bs->job) {
         aio_context_release(*aio_context);
+        error_set(errp, ERROR_CLASS_DEVICE_NOT_ACTIVE,
+              "No active block job on node '%s'", device_or_node);
         goto notfound;
     }
 
     return bs->job;
 
 notfound:
-    error_set(errp, ERROR_CLASS_DEVICE_NOT_ACTIVE,
-              "No active block job on device '%s'", device);
     *aio_context = NULL;
     return NULL;
 }
diff --git a/blockjob.c b/blockjob.c
index 562362b..57cf0c3 100644
--- a/blockjob.c
+++ b/blockjob.c
@@ -52,7 +52,8 @@ void *block_job_create(const BlockJobDriver *driver, BlockDriverState *bs,
     BlockJob *job;
 
     if (bs->job) {
-        error_set(errp, QERR_DEVICE_IN_USE, bdrv_get_device_name(bs));
+        error_setg(errp, "Node '%s' is in use",
+                   bdrv_get_device_or_node_name(bs));
         return NULL;
     }
     bdrv_ref(bs);
@@ -121,8 +122,9 @@ void block_job_set_speed(BlockJob *job, int64_t speed, Error **errp)
 void block_job_complete(BlockJob *job, Error **errp)
 {
     if (job->paused || job->cancelled || !job->driver->complete) {
-        error_set(errp, QERR_BLOCK_JOB_NOT_READY,
-                  bdrv_get_device_name(job->bs));
+        error_setg(errp,
+                   "The active block job for node '%s' cannot be completed",
+                   bdrv_get_device_or_node_name(job->bs));
         return;
     }
 
@@ -268,7 +270,7 @@ BlockJobInfo *block_job_query(BlockJob *job)
 {
     BlockJobInfo *info = g_new0(BlockJobInfo, 1);
     info->type      = g_strdup(BlockJobType_lookup[job->driver->job_type]);
-    info->device    = g_strdup(bdrv_get_device_name(job->bs));
+    info->device    = g_strdup(bdrv_get_device_or_node_name(job->bs));
     info->len       = job->len;
     info->busy      = job->busy;
     info->paused    = job->paused;
@@ -290,7 +292,7 @@ static void block_job_iostatus_set_err(BlockJob *job, int error)
 void block_job_event_cancelled(BlockJob *job)
 {
     qapi_event_send_block_job_cancelled(job->driver->job_type,
-                                        bdrv_get_device_name(job->bs),
+                                        bdrv_get_device_or_node_name(job->bs),
                                         job->len,
                                         job->offset,
                                         job->speed,
@@ -300,7 +302,7 @@ void block_job_event_cancelled(BlockJob *job)
 void block_job_event_completed(BlockJob *job, const char *msg)
 {
     qapi_event_send_block_job_completed(job->driver->job_type,
-                                        bdrv_get_device_name(job->bs),
+                                        bdrv_get_device_or_node_name(job->bs),
                                         job->len,
                                         job->offset,
                                         job->speed,
@@ -314,7 +316,7 @@ void block_job_event_ready(BlockJob *job)
     job->ready = true;
 
     qapi_event_send_block_job_ready(job->driver->job_type,
-                                    bdrv_get_device_name(job->bs),
+                                    bdrv_get_device_or_node_name(job->bs),
                                     job->len,
                                     job->offset,
                                     job->speed, &error_abort);
@@ -343,7 +345,7 @@ BlockErrorAction block_job_error_action(BlockJob *job, BlockDriverState *bs,
     default:
         abort();
     }
-    qapi_event_send_block_job_error(bdrv_get_device_name(job->bs),
+    qapi_event_send_block_job_error(bdrv_get_device_or_node_name(job->bs),
                                     is_read ? IO_OPERATION_TYPE_READ :
                                     IO_OPERATION_TYPE_WRITE,
                                     action, &error_abort);
diff --git a/docs/qmp/qmp-events.txt b/docs/qmp/qmp-events.txt
index b19e490..db90c61 100644
--- a/docs/qmp/qmp-events.txt
+++ b/docs/qmp/qmp-events.txt
@@ -89,7 +89,7 @@ Data:
 
 - "type":     Job type (json-string; "stream" for image streaming
                                      "commit" for block commit)
-- "device":   Device name (json-string)
+- "device":   Device name, or node name if not present (json-string)
 - "len":      Maximum progress value (json-int)
 - "offset":   Current progress value (json-int)
               On success this is equal to len.
@@ -113,7 +113,7 @@ Data:
 
 - "type":     Job type (json-string; "stream" for image streaming
                                      "commit" for block commit)
-- "device":   Device name (json-string)
+- "device":   Device name, or node name if not present (json-string)
 - "len":      Maximum progress value (json-int)
 - "offset":   Current progress value (json-int)
               On success this is equal to len.
@@ -140,7 +140,7 @@ Emitted when a block job encounters an error.
 
 Data:
 
-- "device": device name (json-string)
+- "device": device name, or node name if not present (json-string)
 - "operation": I/O operation (json-string, "read" or "write")
 - "action": action that has been taken, it's one of the following (json-string):
     "ignore": error has been ignored, the job may fail later
@@ -164,7 +164,7 @@ Data:
 
 - "type":     Job type (json-string; "stream" for image streaming
                                      "commit" for block commit)
-- "device":   Device name (json-string)
+- "device":   Device name, or node name if not present (json-string)
 - "len":      Maximum progress value (json-int)
 - "offset":   Current progress value (json-int)
               On success this is equal to len.
diff --git a/include/qapi/qmp/qerror.h b/include/qapi/qmp/qerror.h
index e567339..4ba442e 100644
--- a/include/qapi/qmp/qerror.h
+++ b/include/qapi/qmp/qerror.h
@@ -37,9 +37,6 @@ void qerror_report_err(Error *err);
 #define QERR_BASE_NOT_FOUND \
     ERROR_CLASS_GENERIC_ERROR, "Base '%s' not found"
 
-#define QERR_BLOCK_JOB_NOT_READY \
-    ERROR_CLASS_GENERIC_ERROR, "The active block job for device '%s' cannot be completed"
-
 #define QERR_BUS_NO_HOTPLUG \
     ERROR_CLASS_GENERIC_ERROR, "Bus '%s' does not support hotplugging"
 
diff --git a/qapi/block-core.json b/qapi/block-core.json
index 21e6cb5..5126ae0 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -540,7 +540,7 @@
 #
 # @type: the job type ('stream' for image streaming)
 #
-# @device: the block device name
+# @device: the block device name, or node name if not present
 #
 # @len: the maximum progress value
 #
@@ -1065,7 +1065,7 @@
 #
 # Throttling can be disabled by setting the speed to 0.
 #
-# @device: the device name
+# @device: the device or node name of the owner of the block job.
 #
 # @speed:  the maximum speed, in bytes per second, or 0 for unlimited.
 #          Defaults to 0.
@@ -1096,7 +1096,7 @@
 # operation can be started at a later time to finish copying all data from the
 # backing file.
 #
-# @device: the device name
+# @device: the device or node name of the owner of the block job.
 #
 # @force: #optional whether to allow cancellation of a paused job (default
 #         false).  Since 1.3.
@@ -1122,7 +1122,7 @@
 # the operation is actually paused.  Cancelling a paused job automatically
 # resumes it.
 #
-# @device: the device name
+# @device: the device or node name of the owner of the block job.
 #
 # Returns: Nothing on success
 #          If no background operation is active on this device, DeviceNotActive
@@ -1142,7 +1142,7 @@
 #
 # This command also clears the error status of the job.
 #
-# @device: the device name
+# @device: the device or node name of the owner of the block job.
 #
 # Returns: Nothing on success
 #          If no background operation is active on this device, DeviceNotActive
@@ -1168,7 +1168,7 @@
 #
 # A cancelled or paused job cannot be completed.
 #
-# @device: the device name
+# @device: the device or node name of the owner of the block job.
 #
 # Returns: Nothing on success
 #          If no background operation is active on this device, DeviceNotActive
@@ -1821,7 +1821,7 @@
 #
 # @type: job type
 #
-# @device: device name
+# @device: device name, or node name if not present
 #
 # @len: maximum progress value
 #
@@ -1852,7 +1852,7 @@
 #
 # @type: job type
 #
-# @device: device name
+# @device: device name, or node name if not present
 #
 # @len: maximum progress value
 #
@@ -1875,7 +1875,7 @@
 #
 # Emitted when a block job encounters an error
 #
-# @device: device name
+# @device: device name, or node name if not present
 #
 # @operation: I/O operation
 #
@@ -1895,7 +1895,7 @@
 #
 # @type: job type
 #
-# @device: device name
+# @device: device name, or node name if not present
 #
 # @len: maximum progress value
 #
-- 
2.1.4

[Qemu-devel] [PATCH 03/11] block: never cancel a streaming job without running stream_complete()

[Alberto Garcia]

We need to call stream_complete() in order to do all the necessary
clean-ups, even if there's an early failure. At the moment it's only
useful to make sure that s->backing_file_str is not leaked, but it
will become more important as we introduce support for streaming to
any intermediate node.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
---
 block/stream.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/block/stream.c b/block/stream.c
index a628901..37bfd8b 100644
--- a/block/stream.c
+++ b/block/stream.c
@@ -114,21 +114,21 @@ static void coroutine_fn stream_run(void *opaque)
     StreamCompleteData *data;
     BlockDriverState *bs = s->common.bs;
     BlockDriverState *base = s->base;
-    int64_t sector_num, end;
+    int64_t sector_num = 0;
+    int64_t end = -1;
     int error = 0;
     int ret = 0;
     int n = 0;
     void *buf;
 
     if (!bs->backing_hd) {
-        block_job_completed(&s->common, 0);
-        return;
+        goto out;
     }
 
     s->common.len = bdrv_getlength(bs);
     if (s->common.len < 0) {
-        block_job_completed(&s->common, s->common.len);
-        return;
+        ret = s->common.len;
+        goto out;
     }
 
     end = s->common.len >> BDRV_SECTOR_BITS;
@@ -215,6 +215,7 @@ wait:
 
     qemu_vfree(buf);
 
+out:
     /* Modify backing chain and close BDSes in main loop */
     data = g_malloc(sizeof(*data));
     data->ret = ret;
-- 
2.1.4

[Qemu-devel] [PATCH 04/11] block: Support streaming to an intermediate layer

[Alberto Garcia]

This makes sure that the image we are steaming into is open in
read-write mode during the operation.

Operation blockers are also set in all intermediate nodes, since they
will be removed from the chain afterwards.

Finally, this also unblocks the stream operation in backing files.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
---
 block.c        |  4 +++-
 block/stream.c | 33 +++++++++++++++++++++++++++++++++
 2 files changed, 36 insertions(+), 1 deletion(-)

diff --git a/block.c b/block.c
index 25289ef..e892cb4 100644
--- a/block.c
+++ b/block.c
@@ -1240,9 +1240,11 @@ void bdrv_set_backing_hd(BlockDriverState *bs, BlockDriverState *backing_hd)
             backing_hd->drv ? backing_hd->drv->format_name : "");
 
     bdrv_op_block_all(bs->backing_hd, bs->backing_blocker);
-    /* Otherwise we won't be able to commit due to check in bdrv_commit */
+    /* Otherwise we won't be able to commit or stream */
     bdrv_op_unblock(bs->backing_hd, BLOCK_OP_TYPE_COMMIT_TARGET,
                     bs->backing_blocker);
+    bdrv_op_unblock(bs->backing_hd, BLOCK_OP_TYPE_STREAM,
+                    bs->backing_blocker);
 out:
     bdrv_refresh_limits(bs, NULL);
 }
diff --git a/block/stream.c b/block/stream.c
index 37bfd8b..8ba5a24 100644
--- a/block/stream.c
+++ b/block/stream.c
@@ -33,6 +33,8 @@ typedef struct StreamBlockJob {
     BlockDriverState *base;
     BlockdevOnError on_error;
     char *backing_file_str;
+    int bs_flags;
+    Error *blocker;
 } StreamBlockJob;
 
 static int coroutine_fn stream_populate(BlockDriverState *bs,
@@ -89,6 +91,13 @@ static void stream_complete(BlockJob *job, void *opaque)
     StreamBlockJob *s = container_of(job, StreamBlockJob, common);
     StreamCompleteData *data = opaque;
     BlockDriverState *base = s->base;
+    BlockDriverState *bs;
+
+    /* Remove all blockers set in stream_start() */
+    for (bs = job->bs->backing_hd; bs && bs != s->base; bs = bs->backing_hd) {
+        bdrv_op_unblock_all(bs, s->blocker);
+    }
+    error_free(s->blocker);
 
     if (!block_job_is_cancelled(&s->common) && data->reached_end &&
         data->ret == 0) {
@@ -103,6 +112,11 @@ static void stream_complete(BlockJob *job, void *opaque)
         close_unused_images(job->bs, base, base_id);
     }
 
+    /* Reopen the image back in read-only mode if necessary */
+    if (s->bs_flags != bdrv_get_flags(job->bs)) {
+        bdrv_reopen(job->bs, s->bs_flags, NULL);
+    }
+
     g_free(s->backing_file_str);
     block_job_completed(&s->common, data->ret);
     g_free(data);
@@ -246,7 +260,9 @@ void stream_start(BlockDriverState *bs, BlockDriverState *base,
                   BlockCompletionFunc *cb,
                   void *opaque, Error **errp)
 {
+    BlockDriverState *iter;
     StreamBlockJob *s;
+    int orig_bs_flags;
 
     if ((on_error == BLOCKDEV_ON_ERROR_STOP ||
          on_error == BLOCKDEV_ON_ERROR_ENOSPC) &&
@@ -255,13 +271,30 @@ void stream_start(BlockDriverState *bs, BlockDriverState *base,
         return;
     }
 
+    /* Make sure that the image is opened in read-write mode */
+    orig_bs_flags = bdrv_get_flags(bs);
+    if (!(orig_bs_flags & BDRV_O_RDWR)) {
+        if (bdrv_reopen(bs, orig_bs_flags | BDRV_O_RDWR, errp) != 0) {
+            return;
+        }
+    }
+
     s = block_job_create(&stream_job_driver, bs, speed, cb, opaque, errp);
     if (!s) {
         return;
     }
 
+    /* Block all intermediate nodes between bs and base, because they
+     * will disappear from the chain after this operation */
+    error_setg(&s->blocker, "blocked by the block-stream operation in '%s'",
+               bdrv_get_device_or_node_name(bs));
+    for (iter = bs->backing_hd; iter && iter != base; iter = iter->backing_hd) {
+        bdrv_op_block_all(iter, s->blocker);
+    }
+
     s->base = base;
     s->backing_file_str = g_strdup(backing_file_str);
+    s->bs_flags = orig_bs_flags;
 
     s->on_error = on_error;
     s->common.co = qemu_coroutine_create(stream_run);
-- 
2.1.4

[Qemu-devel] [PATCH 05/11] block: Add QMP support for streaming to an intermediate layer

[Alberto Garcia]

This patch makes the 'device' parameter of the 'block-stream' command
accept a node name as well as a device name.

In addition to that, operation blockers will be checked in all
intermediate nodes between the top and the base node.

Since qmp_block_stream() now uses the error from bdrv_lookup_bs() and
no longer returns DeviceNotFound, iotest 030 is updated to expect
GenericError instead.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
 blockdev.c             | 20 ++++++++++----------
 qapi/block-core.json   | 10 +++++++---
 tests/qemu-iotests/030 |  2 +-
 3 files changed, 18 insertions(+), 14 deletions(-)

diff --git a/blockdev.c b/blockdev.c
index 677432f..d62e548 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -2104,8 +2104,7 @@ void qmp_block_stream(const char *device,
                       bool has_on_error, BlockdevOnError on_error,
                       Error **errp)
 {
-    BlockBackend *blk;
-    BlockDriverState *bs;
+    BlockDriverState *bs, *iter;
     BlockDriverState *base_bs = NULL;
     AioContext *aio_context;
     Error *local_err = NULL;
@@ -2115,20 +2114,14 @@ void qmp_block_stream(const char *device,
         on_error = BLOCKDEV_ON_ERROR_REPORT;
     }
 
-    blk = blk_by_name(device);
-    if (!blk) {
-        error_set(errp, QERR_DEVICE_NOT_FOUND, device);
+    bs = bdrv_lookup_bs(device, device, errp);
+    if (!bs) {
         return;
     }
-    bs = blk_bs(blk);
 
     aio_context = bdrv_get_aio_context(bs);
     aio_context_acquire(aio_context);
 
-    if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_STREAM, errp)) {
-        goto out;
-    }
-
     if (has_base) {
         base_bs = bdrv_find_backing_image(bs, base);
         if (base_bs == NULL) {
@@ -2139,6 +2132,13 @@ void qmp_block_stream(const char *device,
         base_name = base;
     }
 
+    /* Check for op blockers in the whole chain between bs and base */
+    for (iter = bs; iter && iter != base_bs; iter = iter->backing_hd) {
+        if (bdrv_op_is_blocked(iter, BLOCK_OP_TYPE_STREAM, errp)) {
+            goto out;
+        }
+    }
+
     /* if we are streaming the entire chain, the result will have no backing
      * file, and specifying one is therefore an error */
     if (base_bs == NULL && has_backing_file) {
diff --git a/qapi/block-core.json b/qapi/block-core.json
index 5126ae0..befc5ce 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -1014,6 +1014,10 @@
 # with query-block-jobs.  The operation can be stopped before it has completed
 # using the block-job-cancel command.
 #
+# The node that receives the data is called the top image, can be located
+# in any part of the whole chain and can be specified using its device
+# or node name.
+#
 # If a base file is specified then sectors are not copied from that base file and
 # its backing chain.  When streaming completes the image file will have the base
 # file as its backing file.  This can be used to stream a subset of the backing
@@ -1022,12 +1026,12 @@
 # On successful completion the image file is updated to drop the backing file
 # and the BLOCK_JOB_COMPLETED event is emitted.
 #
-# @device: the device name
+# @device: the device or node name of the top image
 #
 # @base:   #optional the common backing file name
 #
-# @backing-file: #optional The backing file string to write into the active
-#                          layer. This filename is not validated.
+# @backing-file: #optional The backing file string to write into the top
+#                          image. This filename is not validated.
 #
 #                          If a pathname string is such that it cannot be
 #                          resolved by QEMU, that means that subsequent QMP or
diff --git a/tests/qemu-iotests/030 b/tests/qemu-iotests/030
index 952a524..7ca9b25 100755
--- a/tests/qemu-iotests/030
+++ b/tests/qemu-iotests/030
@@ -107,7 +107,7 @@ class TestSingleDrive(iotests.QMPTestCase):
 
     def test_device_not_found(self):
         result = self.vm.qmp('block-stream', device='nonexistent')
-        self.assert_qmp(result, 'error/class', 'DeviceNotFound')
+        self.assert_qmp(result, 'error/class', 'GenericError')
 
 
 class TestSmallerBackingFile(iotests.QMPTestCase):
-- 
2.1.4

[Qemu-devel] [PATCH 06/11] docs: Document how to stream to an intermediate layer

[Alberto Garcia]

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
 docs/live-block-ops.txt | 31 ++++++++++++++++++++-----------
 1 file changed, 20 insertions(+), 11 deletions(-)

diff --git a/docs/live-block-ops.txt b/docs/live-block-ops.txt
index a257087..a05d869 100644
--- a/docs/live-block-ops.txt
+++ b/docs/live-block-ops.txt
@@ -10,9 +10,9 @@ Snapshot live merge
 Given a snapshot chain, described in this document in the following
 format:
 
-[A] -> [B] -> [C] -> [D]
+[A] <- [B] <- [C] <- [D] <- [E]
 
-Where the rightmost object ([D] in the example) described is the current
+Where the rightmost object ([E] in the example) described is the current
 image which the guest OS has write access to. To the left of it is its base
 image, and so on accordingly until the leftmost image, which has no
 base.
@@ -21,11 +21,14 @@ The snapshot live merge operation transforms such a chain into a
 smaller one with fewer elements, such as this transformation relative
 to the first example:
 
-[A] -> [D]
+[A] <- [E]
 
-Currently only forward merge with target being the active image is
-supported, that is, data copy is performed in the right direction with
-destination being the rightmost image.
+Data is copied in the right direction with destination being the
+rightmost image, but any other intermediate image can be specified
+instead. In this example data is copied from [C] into [D], so [D] can
+be backed by [B]:
+
+[A] <- [B] <- [D] <- [E]
 
 The operation is implemented in QEMU through image streaming facilities.
 
@@ -35,14 +38,20 @@ streaming operation completes it raises a QMP event. 'block_stream'
 copies data from the backing file(s) into the active image. When finished,
 it adjusts the backing file pointer.
 
-The 'base' parameter specifies an image which data need not be streamed from.
-This image will be used as the backing file for the active image when the
-operation is finished.
+The 'base' parameter specifies an image which data need not be
+streamed from. This image will be used as the backing file for the
+destination image when the operation is finished.
+
+In the first example above, the command would be:
+
+(qemu) block_stream virtio0 file-A.img
 
-In the example above, the command would be:
+In order to specify a destination image different from the active
+(rightmost) one we can use its (previously set) node name instead.
 
-(qemu) block_stream virtio0 A
+In the second example above, the command would be:
 
+(qemu) block_stream node-D file-B.img
 
 Live block copy
 ===============
-- 
2.1.4

[Qemu-devel] [PATCH 07/11] qemu-iotests: fix test_stream_partial()

[Alberto Garcia]

This test is streaming to the top layer using the intermediate image
as the base. This is a mistake since block-stream never copies data
from the base image and its backing chain, so this is effectively a
no-op.

In addition to fixing the base parameter, this patch also writes some
data to the intermediate image before the test, so there's something
to copy and the test is meaningful.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
---
 tests/qemu-iotests/030 | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/tests/qemu-iotests/030 b/tests/qemu-iotests/030
index 7ca9b25..6e6cb5a 100755
--- a/tests/qemu-iotests/030
+++ b/tests/qemu-iotests/030
@@ -35,6 +35,7 @@ class TestSingleDrive(iotests.QMPTestCase):
         qemu_img('create', '-f', iotests.imgfmt, '-o', 'backing_file=%s' % backing_img, mid_img)
         qemu_img('create', '-f', iotests.imgfmt, '-o', 'backing_file=%s' % mid_img, test_img)
         qemu_io('-f', 'raw', '-c', 'write -P 0x1 0 512', backing_img)
+        qemu_io('-f', iotests.imgfmt, '-c', 'write -P 0x1 524288 512', mid_img)
         self.vm = iotests.VM().add_drive("blkdebug::" + test_img)
         self.vm.launch()
 
@@ -93,7 +94,7 @@ class TestSingleDrive(iotests.QMPTestCase):
     def test_stream_partial(self):
         self.assert_no_active_block_jobs()
 
-        result = self.vm.qmp('block-stream', device='drive0', base=mid_img)
+        result = self.vm.qmp('block-stream', device='drive0', base=backing_img)
         self.assert_qmp(result, 'return', {})
 
         self.wait_until_completed()
-- 
2.1.4

[Qemu-devel] [PATCH 08/11] qemu-iotests: add no-op streaming test

[Alberto Garcia]

This patch tests that in a partial block-stream operation, no data is
ever copied from the base image.

Signed-off-by: Alberto Garcia <berto@igalia.com>
---
 tests/qemu-iotests/030     | 18 ++++++++++++++++++
 tests/qemu-iotests/030.out |  4 ++--
 2 files changed, 20 insertions(+), 2 deletions(-)

diff --git a/tests/qemu-iotests/030 b/tests/qemu-iotests/030
index 6e6cb5a..bc53885 100755
--- a/tests/qemu-iotests/030
+++ b/tests/qemu-iotests/030
@@ -91,6 +91,24 @@ class TestSingleDrive(iotests.QMPTestCase):
                          qemu_io('-f', iotests.imgfmt, '-c', 'map', test_img),
                          'image file map does not match backing file after streaming')
 
+    def test_stream_no_op(self):
+        self.assert_no_active_block_jobs()
+
+        # The image map is empty before the operation
+        empty_map = qemu_io('-f', iotests.imgfmt, '-c', 'map', test_img)
+
+        # This is a no-op: no data should ever be copied from the base image
+        result = self.vm.qmp('block-stream', device='drive0', base=mid_img)
+        self.assert_qmp(result, 'return', {})
+
+        self.wait_until_completed()
+
+        self.assert_no_active_block_jobs()
+        self.vm.shutdown()
+
+        self.assertEqual(qemu_io('-f', iotests.imgfmt, '-c', 'map', test_img),
+                         empty_map, 'image file map changed after a no-op')
+
     def test_stream_partial(self):
         self.assert_no_active_block_jobs()
 
diff --git a/tests/qemu-iotests/030.out b/tests/qemu-iotests/030.out
index fa16b5c..6323079 100644
--- a/tests/qemu-iotests/030.out
+++ b/tests/qemu-iotests/030.out
@@ -1,5 +1,5 @@
-.............
+..............
 ----------------------------------------------------------------------
-Ran 13 tests
+Ran 14 tests
 
 OK
-- 
2.1.4

[Qemu-devel] [PATCH 09/11] qemu-iotests: test streaming to an intermediate layer

[Alberto Garcia]

This adds test_stream_intermediate(), similar to test_stream() but
streams to the intermediate image instead.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
---
 tests/qemu-iotests/030     | 18 +++++++++++++++++-
 tests/qemu-iotests/030.out |  4 ++--
 2 files changed, 19 insertions(+), 3 deletions(-)

diff --git a/tests/qemu-iotests/030 b/tests/qemu-iotests/030
index bc53885..0927457 100755
--- a/tests/qemu-iotests/030
+++ b/tests/qemu-iotests/030
@@ -36,7 +36,8 @@ class TestSingleDrive(iotests.QMPTestCase):
         qemu_img('create', '-f', iotests.imgfmt, '-o', 'backing_file=%s' % mid_img, test_img)
         qemu_io('-f', 'raw', '-c', 'write -P 0x1 0 512', backing_img)
         qemu_io('-f', iotests.imgfmt, '-c', 'write -P 0x1 524288 512', mid_img)
-        self.vm = iotests.VM().add_drive("blkdebug::" + test_img)
+        opts = "backing.node-name=mid"
+        self.vm = iotests.VM().add_drive("blkdebug::" + test_img, opts)
         self.vm.launch()
 
     def tearDown(self):
@@ -60,6 +61,21 @@ class TestSingleDrive(iotests.QMPTestCase):
                          qemu_io('-f', iotests.imgfmt, '-c', 'map', test_img),
                          'image file map does not match backing file after streaming')
 
+    def test_stream_intermediate(self):
+        self.assert_no_active_block_jobs()
+
+        result = self.vm.qmp('block-stream', device='mid')
+        self.assert_qmp(result, 'return', {})
+
+        self.wait_until_completed(drive='mid')
+
+        self.assert_no_active_block_jobs()
+        self.vm.shutdown()
+
+        self.assertEqual(qemu_io('-f', 'raw', '-c', 'map', backing_img),
+                         qemu_io('-f', iotests.imgfmt, '-c', 'map', mid_img),
+                         'image file map does not match backing file after streaming')
+
     def test_stream_pause(self):
         self.assert_no_active_block_jobs()
 
diff --git a/tests/qemu-iotests/030.out b/tests/qemu-iotests/030.out
index 6323079..96961ed 100644
--- a/tests/qemu-iotests/030.out
+++ b/tests/qemu-iotests/030.out
@@ -1,5 +1,5 @@
-..............
+...............
 ----------------------------------------------------------------------
-Ran 14 tests
+Ran 15 tests
 
 OK
-- 
2.1.4

[Qemu-devel] [PATCH 10/11] qemu-iotests: test block-stream operations in parallel

[Alberto Garcia]

This test case checks that it's possible to launch several stream
operations in parallel in the same snapshot chain, each one involving
a different set of nodes.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
---
 tests/qemu-iotests/030     | 80 ++++++++++++++++++++++++++++++++++++++++++++++
 tests/qemu-iotests/030.out |  4 +--
 2 files changed, 82 insertions(+), 2 deletions(-)

diff --git a/tests/qemu-iotests/030 b/tests/qemu-iotests/030
index 0927457..c199cef 100755
--- a/tests/qemu-iotests/030
+++ b/tests/qemu-iotests/030
@@ -145,6 +145,86 @@ class TestSingleDrive(iotests.QMPTestCase):
         self.assert_qmp(result, 'error/class', 'GenericError')
 
 
+class TestParallelOps(iotests.QMPTestCase):
+    image_len = 2 * 1024 * 1024 # MB
+    num_ops = 4 # Number of parallel block-stream operations
+    num_imgs = num_ops * 2 + 1
+    imgs = []
+
+    def setUp(self):
+        opts = []
+        self.imgs = []
+
+        # Initialize file names and command-line options
+        for i in range(self.num_imgs):
+            img_depth = self.num_imgs - i - 1
+            opts.append("backing." * img_depth + "node-name=node%d" % i)
+            self.imgs.append(os.path.join(iotests.test_dir, 'img-%d.img' % i))
+
+        # Create all images
+        iotests.create_image(self.imgs[0], self.image_len)
+        for i in range(1, self.num_imgs):
+            qemu_img('create', '-f', iotests.imgfmt,
+                     '-o', 'backing_file=%s' % self.imgs[i-1], self.imgs[i])
+
+        # Put data into the images we are copying data from
+        for i in range(1, self.num_imgs, 2):
+            qemu_io('-f', iotests.imgfmt,
+                    '-c', 'write -P %d %d 128K' % (i, i*128*1024), self.imgs[i])
+
+        # Attach the drive to the VM
+        self.vm = iotests.VM()
+        self.vm.add_drive("blkdebug::" + self.imgs[-1], ','.join(opts))
+        self.vm.launch()
+
+    def tearDown(self):
+        self.vm.shutdown()
+        for img in self.imgs:
+            os.remove(img)
+
+    # Test that it's possible to run several block-stream operations
+    # in parallel in the same snapshot chain
+    def test_stream_parallel(self):
+        self.assert_no_active_block_jobs()
+
+        # Check that the maps don't match before the streaming operations
+        for i in range(2, self.num_imgs, 2):
+            self.assertNotEqual(qemu_io('-f', iotests.imgfmt, '-c', 'map', self.imgs[i]),
+                                qemu_io('-f', iotests.imgfmt, '-c', 'map', self.imgs[i-1]),
+                                'image file map matches backing file before streaming')
+
+        # Create all streaming jobs
+        pending_jobs = []
+        for i in range(2, self.num_imgs, 2):
+            node_name = 'node%d' % i
+            pending_jobs.append(node_name)
+            result = self.vm.qmp('block-stream', device=node_name, base=self.imgs[i-2], speed=32768)
+            self.assert_qmp(result, 'return', {})
+
+        # The block job on the active image is always referenced by
+        # its device name. Therefore we have to replace the node name
+        # with the device name in the list of pending jobs
+        pending_jobs.pop()
+        pending_jobs.append("drive0")
+
+        # Wait for all jobs to be finished.
+        while len(pending_jobs) > 0:
+            for event in self.vm.get_qmp_events(wait=True):
+                if event['event'] == 'BLOCK_JOB_COMPLETED':
+                    node_name = self.dictpath(event, 'data/device')
+                    self.assertTrue(node_name in pending_jobs)
+                    self.assert_qmp_absent(event, 'data/error')
+                    pending_jobs.remove(node_name)
+
+        self.assert_no_active_block_jobs()
+        self.vm.shutdown()
+
+        # Check that all maps match now
+        for i in range(2, self.num_imgs, 2):
+            self.assertEqual(qemu_io('-f', iotests.imgfmt, '-c', 'map', self.imgs[i]),
+                             qemu_io('-f', iotests.imgfmt, '-c', 'map', self.imgs[i-1]),
+                             'image file map does not match backing file after streaming')
+
 class TestSmallerBackingFile(iotests.QMPTestCase):
     backing_len = 1 * 1024 * 1024 # MB
     image_len = 2 * backing_len
diff --git a/tests/qemu-iotests/030.out b/tests/qemu-iotests/030.out
index 96961ed..b6f2576 100644
--- a/tests/qemu-iotests/030.out
+++ b/tests/qemu-iotests/030.out
@@ -1,5 +1,5 @@
-...............
+................
 ----------------------------------------------------------------------
-Ran 15 tests
+Ran 16 tests
 
 OK
-- 
2.1.4

[Qemu-devel] [PATCH 11/11] qemu-iotests: test overlapping block-stream operations

[Alberto Garcia]

This test case checks that it's not possible to perform two
block-stream operations if there are nodes involved in both.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
---
 tests/qemu-iotests/030     | 27 +++++++++++++++++++++++++++
 tests/qemu-iotests/030.out |  4 ++--
 2 files changed, 29 insertions(+), 2 deletions(-)

diff --git a/tests/qemu-iotests/030 b/tests/qemu-iotests/030
index c199cef..f898c92 100755
--- a/tests/qemu-iotests/030
+++ b/tests/qemu-iotests/030
@@ -225,6 +225,33 @@ class TestParallelOps(iotests.QMPTestCase):
                              qemu_io('-f', iotests.imgfmt, '-c', 'map', self.imgs[i-1]),
                              'image file map does not match backing file after streaming')
 
+    # Test that it's not possible to perform two block-stream
+    # operations if there are nodes involved in both.
+    def test_stream_overlapping(self):
+        self.assert_no_active_block_jobs()
+
+        # Set a speed limit to make sure that this job blocks the rest
+        result = self.vm.qmp('block-stream', device='node4', base=self.imgs[0], speed=32768)
+        self.assert_qmp(result, 'return', {})
+
+        result = self.vm.qmp('block-stream', device='node5', base=self.imgs[1])
+        self.assert_qmp(result, 'error/class', 'GenericError')
+
+        result = self.vm.qmp('block-stream', device='node3', base=self.imgs[2])
+        self.assert_qmp(result, 'error/class', 'GenericError')
+
+        result = self.vm.qmp('block-stream', device='node4')
+        self.assert_qmp(result, 'error/class', 'GenericError')
+
+        # If node4 is the active node, the id of the block job is drive0
+        if self.num_imgs == 5:
+            self.wait_until_completed(drive='drive0')
+        else:
+            self.wait_until_completed(drive='node4')
+        self.assert_no_active_block_jobs()
+
+        self.vm.shutdown()
+
 class TestSmallerBackingFile(iotests.QMPTestCase):
     backing_len = 1 * 1024 * 1024 # MB
     image_len = 2 * backing_len
diff --git a/tests/qemu-iotests/030.out b/tests/qemu-iotests/030.out
index b6f2576..52d796e 100644
--- a/tests/qemu-iotests/030.out
+++ b/tests/qemu-iotests/030.out
@@ -1,5 +1,5 @@
-................
+.................
 ----------------------------------------------------------------------
-Ran 16 tests
+Ran 17 tests
 
 OK
-- 
2.1.4

Re: [Qemu-devel] [PATCH 08/11] qemu-iotests: add no-op streaming test

[Max Reitz]

On 24.04.2015 17:01, Alberto Garcia wrote:
> This patch tests that in a partial block-stream operation, no data is
> ever copied from the base image.
>
> Signed-off-by: Alberto Garcia <berto@igalia.com>
> ---
>   tests/qemu-iotests/030     | 18 ++++++++++++++++++
>   tests/qemu-iotests/030.out |  4 ++--
>   2 files changed, 20 insertions(+), 2 deletions(-)
>
> diff --git a/tests/qemu-iotests/030 b/tests/qemu-iotests/030
> index 6e6cb5a..bc53885 100755
> --- a/tests/qemu-iotests/030
> +++ b/tests/qemu-iotests/030
> @@ -91,6 +91,24 @@ class TestSingleDrive(iotests.QMPTestCase):
>                            qemu_io('-f', iotests.imgfmt, '-c', 'map', test_img),
>                            'image file map does not match backing file after streaming')
>   
> +    def test_stream_no_op(self):
> +        self.assert_no_active_block_jobs()
> +
> +        # The image map is empty before the operation
> +        empty_map = qemu_io('-f', iotests.imgfmt, '-c', 'map', test_img)

Oh, that was too obvious. :-)

Reviewed-by: Max Reitz <mreitz@redhat.com>

> +
> +        # This is a no-op: no data should ever be copied from the base image
> +        result = self.vm.qmp('block-stream', device='drive0', base=mid_img)
> +        self.assert_qmp(result, 'return', {})
> +
> +        self.wait_until_completed()
> +
> +        self.assert_no_active_block_jobs()
> +        self.vm.shutdown()
> +
> +        self.assertEqual(qemu_io('-f', iotests.imgfmt, '-c', 'map', test_img),
> +                         empty_map, 'image file map changed after a no-op')
> +
>       def test_stream_partial(self):
>           self.assert_no_active_block_jobs()
>   
> diff --git a/tests/qemu-iotests/030.out b/tests/qemu-iotests/030.out
> index fa16b5c..6323079 100644
> --- a/tests/qemu-iotests/030.out
> +++ b/tests/qemu-iotests/030.out
> @@ -1,5 +1,5 @@
> -.............
> +..............
>   ----------------------------------------------------------------------
> -Ran 13 tests
> +Ran 14 tests
>   
>   OK

[Qemu-devel] [PATCH 08/11] qemu-iotests: add no-op streaming test

[Alberto Garcia]

This patch tests that in a partial block-stream operation, no data is
ever copied from the base image.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
---
 tests/qemu-iotests/030     | 18 ++++++++++++++++++
 tests/qemu-iotests/030.out |  4 ++--
 2 files changed, 20 insertions(+), 2 deletions(-)

diff --git a/tests/qemu-iotests/030 b/tests/qemu-iotests/030
index 6e6cb5a..bc53885 100755
--- a/tests/qemu-iotests/030
+++ b/tests/qemu-iotests/030
@@ -91,6 +91,24 @@ class TestSingleDrive(iotests.QMPTestCase):
                          qemu_io('-f', iotests.imgfmt, '-c', 'map', test_img),
                          'image file map does not match backing file after streaming')
 
+    def test_stream_no_op(self):
+        self.assert_no_active_block_jobs()
+
+        # The image map is empty before the operation
+        empty_map = qemu_io('-f', iotests.imgfmt, '-c', 'map', test_img)
+
+        # This is a no-op: no data should ever be copied from the base image
+        result = self.vm.qmp('block-stream', device='drive0', base=mid_img)
+        self.assert_qmp(result, 'return', {})
+
+        self.wait_until_completed()
+
+        self.assert_no_active_block_jobs()
+        self.vm.shutdown()
+
+        self.assertEqual(qemu_io('-f', iotests.imgfmt, '-c', 'map', test_img),
+                         empty_map, 'image file map changed after a no-op')
+
     def test_stream_partial(self):
         self.assert_no_active_block_jobs()
 
diff --git a/tests/qemu-iotests/030.out b/tests/qemu-iotests/030.out
index fa16b5c..6323079 100644
--- a/tests/qemu-iotests/030.out
+++ b/tests/qemu-iotests/030.out
@@ -1,5 +1,5 @@
-.............
+..............
 ----------------------------------------------------------------------
-Ran 13 tests
+Ran 14 tests
 
 OK
-- 
2.1.4

Re: [Qemu-devel] [PATCH 08/11] qemu-iotests: add no-op streaming test

[Fam Zheng]

On Wed, 05/13 16:27, Alberto Garcia wrote:
> This patch tests that in a partial block-stream operation, no data is
> ever copied from the base image.
> 
> Signed-off-by: Alberto Garcia <berto@igalia.com>
> Reviewed-by: Max Reitz <mreitz@redhat.com>

Reviewed-by: Fam Zheng <famz@redhat.com>

> ---
>  tests/qemu-iotests/030     | 18 ++++++++++++++++++
>  tests/qemu-iotests/030.out |  4 ++--
>  2 files changed, 20 insertions(+), 2 deletions(-)
> 
> diff --git a/tests/qemu-iotests/030 b/tests/qemu-iotests/030
> index 6e6cb5a..bc53885 100755
> --- a/tests/qemu-iotests/030
> +++ b/tests/qemu-iotests/030
> @@ -91,6 +91,24 @@ class TestSingleDrive(iotests.QMPTestCase):
>                           qemu_io('-f', iotests.imgfmt, '-c', 'map', test_img),
>                           'image file map does not match backing file after streaming')
>  
> +    def test_stream_no_op(self):
> +        self.assert_no_active_block_jobs()
> +
> +        # The image map is empty before the operation
> +        empty_map = qemu_io('-f', iotests.imgfmt, '-c', 'map', test_img)
> +
> +        # This is a no-op: no data should ever be copied from the base image
> +        result = self.vm.qmp('block-stream', device='drive0', base=mid_img)
> +        self.assert_qmp(result, 'return', {})
> +
> +        self.wait_until_completed()
> +
> +        self.assert_no_active_block_jobs()
> +        self.vm.shutdown()
> +
> +        self.assertEqual(qemu_io('-f', iotests.imgfmt, '-c', 'map', test_img),
> +                         empty_map, 'image file map changed after a no-op')
> +
>      def test_stream_partial(self):
>          self.assert_no_active_block_jobs()
>  
> diff --git a/tests/qemu-iotests/030.out b/tests/qemu-iotests/030.out
> index fa16b5c..6323079 100644
> --- a/tests/qemu-iotests/030.out
> +++ b/tests/qemu-iotests/030.out
> @@ -1,5 +1,5 @@
> -.............
> +..............
>  ----------------------------------------------------------------------
> -Ran 13 tests
> +Ran 14 tests
>  
>  OK
> -- 
> 2.1.4
> 
>