qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: John Snow <jsnow@redhat.com>
To: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>,
	qemu-devel@nongnu.org
Cc: kwolf@redhat.com, pbonzini@redhat.com,
	Vladimir Sementsov-Ogievskiy <vsementsov@parallels.com>,
	stefanha@redhat.com, den@openvz.org
Subject: Re: [Qemu-devel] [PATCH 6/8] qcow2: add autoclear bit for dirty bitmaps
Date: Thu, 11 Jun 2015 12:36:01 -0400	[thread overview]
Message-ID: <5579B8F1.4040606@redhat.com> (raw)
In-Reply-To: <557967C1.1010009@virtuozzo.com>



On 06/11/2015 06:49 AM, Vladimir Sementsov-Ogievskiy wrote:
> On 11.06.2015 02:42, John Snow wrote:
>>
>> On 06/08/2015 11:21 AM, Vladimir Sementsov-Ogievskiy wrote:
>>> From: Vladimir Sementsov-Ogievskiy <vsementsov@parallels.com>
>>>
>>> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
>>> ---
>>>   block/qcow2-dirty-bitmap.c |  5 +++++
>>>   block/qcow2.c              | 13 +++++++++++--
>>>   block/qcow2.h              |  9 +++++++++
>>>   3 files changed, 25 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/block/qcow2-dirty-bitmap.c b/block/qcow2-dirty-bitmap.c
>>> index db83112..686a121 100644
>>> --- a/block/qcow2-dirty-bitmap.c
>>> +++ b/block/qcow2-dirty-bitmap.c
>>> @@ -188,6 +188,11 @@ static int
>>> qcow2_write_dirty_bitmaps(BlockDriverState *bs)
>>>         s->dirty_bitmaps_offset = dirty_bitmaps_offset;
>>>       s->dirty_bitmaps_size = dirty_bitmaps_size;
>>> +    if (s->nb_dirty_bitmaps > 0) {
>>> +        s->autoclear_features |= QCOW2_AUTOCLEAR_DIRTY_BITMAPS;
>>> +    } else {
>>> +        s->autoclear_features &= ~QCOW2_AUTOCLEAR_DIRTY_BITMAPS;
>>> +    }
>>>       ret = qcow2_update_header(bs);
>>>       if (ret < 0) {
>>>           fprintf(stderr, "Could not update qcow2 header\n");
>>> diff --git a/block/qcow2.c b/block/qcow2.c
>>> index 406e55d..f85a55a 100644
>>> --- a/block/qcow2.c
>>> +++ b/block/qcow2.c
>>> @@ -182,6 +182,14 @@ static int
>>> qcow2_read_extensions(BlockDriverState *bs, uint64_t start_offset,
>>>                   return ret;
>>>               }
>>>   +            if (!(s->autoclear_features &
>>> QCOW2_AUTOCLEAR_DIRTY_BITMAPS) &&
>>> +                s->nb_dirty_bitmaps > 0) {
>>> +                ret = qcow2_delete_all_dirty_bitmaps(bs, errp);
>>> +                if (ret < 0) {
>>> +                    return ret;
>>> +                }
>>> +            }
>>> +
>>>   #ifdef DEBUG_EXT
>>>               printf("Qcow2: Got dirty bitmaps extension:"
>>>                      " offset=%" PRIu64 " nb_bitmaps=%" PRIu32 "\n",
>>> @@ -928,8 +936,9 @@ static int qcow2_open(BlockDriverState *bs, QDict
>>> *options, int flags,
>>>       }
>>>         /* Clear unknown autoclear feature bits */
>>> -    if (!bs->read_only && !(flags & BDRV_O_INCOMING) &&
>>> s->autoclear_features) {
>>> -        s->autoclear_features = 0;
>>> +    if (!bs->read_only && !(flags & BDRV_O_INCOMING) &&
>>> +        (s->autoclear_features & ~QCOW2_AUTOCLEAR_MASK)) {
>>> +        s->autoclear_features |= QCOW2_AUTOCLEAR_MASK;
>> Like Stefan already mentioned, fixing this |= to &= will fix iotest 036,
>> which is otherwise broken by this patch.
>>
>>>           ret = qcow2_update_header(bs);
>>>           if (ret < 0) {
>>>               error_setg_errno(errp, -ret, "Could not update qcow2
>>> header");
>>> diff --git a/block/qcow2.h b/block/qcow2.h
>>> index b5e576c..14bd6f9 100644
>>> --- a/block/qcow2.h
>>> +++ b/block/qcow2.h
>>> @@ -215,6 +215,15 @@ enum {
>>>       QCOW2_COMPAT_FEAT_MASK            = QCOW2_COMPAT_LAZY_REFCOUNTS,
>>>   };
>>>   +/* Autoclear feature bits */
>>> +enum {
>>> +    QCOW2_AUTOCLEAR_DIRTY_BITMAPS_BITNR = 0,
>>> +    QCOW2_AUTOCLEAR_DIRTY_BITMAPS       =
>>> +        1 << QCOW2_AUTOCLEAR_DIRTY_BITMAPS_BITNR,
>>> +
>>> +    QCOW2_AUTOCLEAR_MASK                =
>>> QCOW2_AUTOCLEAR_DIRTY_BITMAPS,
>>> +};
>>> +
>> I find it a little awkward to have an enum with three different kinds of
>> data in it, unless I am reading this incorrectly. (bit position, bit
>> masks, and accumulated bit mask.)
>>
>> Just enumerating the indices is probably sufficient:
>>
>> enum {
>>    QCOW2_AUTOCLEAR_BEGIN = 0,
>>    QCOW2_AUTOCLEAR_DIRTY_BITMAPS = QCOW2_AUTOCLEAR_BEGIN,
>>    ...,
>>    QCOW2_AUTOCLEAR_END
>> }
>>
>> and then the QCOW2_AUTOCLEAR_MASK can either be programmatically defined
>> via a function, or just pre-computed as a #define.
>>
>> If you still want the mask definitions, you could do something cheeky
>> like this:
>>
>> #define AUTOCLEAR_MASK(X) (1 << QCOW2_AUTOCLEAR_ ## X)
>>
>> and then you can use things like AUTOCLEAR_MASK(DIRTY_BITMAPS) without
>> having to create and maintain two separate tables if you want both forms
>> easily available.
> 
> 
> This enum is made like enums for  QCOW2_INCOMPAT_* and QCOW2_COMPAT_*,
> which are already in the code... Then, may I make a patch for them too?
> I agree, it is strange solution to put things of different nature to one
> enum.
> 

Follow Kevin's lead, here -- It looked strange to me, but it _is_ best
to follow the existing style. I didn't look at the surrounding code too
carefully.

> 
>>
>>>   enum qcow2_discard_type {
>>>       QCOW2_DISCARD_NEVER = 0,
>>>       QCOW2_DISCARD_ALWAYS,
>>>
> 
> 

  reply	other threads:[~2015-06-11 16:36 UTC|newest]

Thread overview: 76+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-08 15:21 [Qemu-devel] [PATCH v2 RFC 0/8] block: persistent dirty bitmaps Vladimir Sementsov-Ogievskiy
2015-06-08 15:21 ` [Qemu-devel] [PATCH 1/8] spec: add qcow2-dirty-bitmaps specification Vladimir Sementsov-Ogievskiy
2015-06-09 16:01   ` John Snow
2015-06-09 17:03   ` Stefan Hajnoczi
2015-06-10  8:19     ` Vladimir Sementsov-Ogievskiy
2015-06-10  8:49       ` Vladimir Sementsov-Ogievskiy
2015-06-10 13:00       ` Eric Blake
2015-06-11 10:16         ` Vladimir Sementsov-Ogievskiy
2015-06-10 13:24       ` Stefan Hajnoczi
2015-06-11 10:19         ` Vladimir Sementsov-Ogievskiy
2015-06-11 13:03           ` Stefan Hajnoczi
2015-06-11 16:21             ` John Snow
2015-06-12 10:28               ` Stefan Hajnoczi
2015-06-12 15:19                 ` John Snow
2015-06-10 15:34   ` Kevin Wolf
2015-06-11 10:25     ` Vladimir Sementsov-Ogievskiy
2015-06-11 16:30       ` John Snow
2015-06-12  8:33         ` Kevin Wolf
2015-08-24 10:46     ` Vladimir Sementsov-Ogievskiy
2015-08-24 13:30   ` Vladimir Sementsov-Ogievskiy
2015-08-24 14:08     ` Vladimir Sementsov-Ogievskiy
2015-08-24 14:04   ` Vladimir Sementsov-Ogievskiy
2015-08-31 22:21   ` Eric Blake
2015-08-31 22:24     ` John Snow
2015-06-08 15:21 ` [Qemu-devel] [PATCH 2/8] qcow2: add dirty-bitmaps feature Vladimir Sementsov-Ogievskiy
2015-06-09 16:52   ` Stefan Hajnoczi
2015-06-10 14:30   ` Stefan Hajnoczi
2015-06-12 19:02     ` John Snow
2015-06-15 14:42       ` Stefan Hajnoczi
2015-06-23 17:57         ` John Snow
2015-06-24  9:39           ` Stefan Hajnoczi
2015-08-14 17:14     ` Vladimir Sementsov-Ogievskiy
2015-08-26  9:09       ` Stefan Hajnoczi
2015-06-11 23:04   ` John Snow
2015-06-15 14:05     ` Vladimir Sementsov-Ogievskiy
2015-06-15 16:53       ` John Snow
2015-06-12 21:55   ` John Snow
2015-08-26 13:15     ` Vladimir Sementsov-Ogievskiy
2015-08-26 14:14       ` Vladimir Sementsov-Ogievskiy
2015-08-27 12:43   ` Vladimir Sementsov-Ogievskiy
2015-06-08 15:21 ` [Qemu-devel] [PATCH 3/8] block: store persistent dirty bitmaps Vladimir Sementsov-Ogievskiy
2015-06-08 15:21 ` [Qemu-devel] [PATCH 4/8] block: add bdrv_load_dirty_bitmap Vladimir Sementsov-Ogievskiy
2015-06-09 16:01   ` Stefan Hajnoczi
2015-06-10 22:33     ` John Snow
2015-06-11 10:41       ` Vladimir Sementsov-Ogievskiy
2015-06-08 15:21 ` [Qemu-devel] [PATCH 5/8] qcow2: add qcow2_dirty_bitmap_delete_all Vladimir Sementsov-Ogievskiy
2015-06-08 15:21 ` [Qemu-devel] [PATCH 6/8] qcow2: add autoclear bit for dirty bitmaps Vladimir Sementsov-Ogievskiy
2015-06-09 15:49   ` Stefan Hajnoczi
2015-06-09 15:50   ` Stefan Hajnoczi
2015-08-27  7:45     ` Vladimir Sementsov-Ogievskiy
2015-08-31 11:06       ` Vladimir Sementsov-Ogievskiy
2015-08-31 22:39       ` Eric Blake
2015-08-31 22:50         ` Eric Blake
2015-06-10 23:42   ` John Snow
2015-06-11  8:35     ` Kevin Wolf
2015-06-11 10:49     ` Vladimir Sementsov-Ogievskiy
2015-06-11 16:36       ` John Snow [this message]
2015-06-08 15:21 ` [Qemu-devel] [PATCH 7/8] qemu: command line option " Vladimir Sementsov-Ogievskiy
2015-06-11 20:57   ` John Snow
2015-06-12 21:49   ` John Snow
2015-06-08 15:21 ` [Qemu-devel] [PATCH 8/8] iotests: test internal persistent dirty bitmap Vladimir Sementsov-Ogievskiy
2015-06-09 16:17   ` Eric Blake
2015-06-10 15:27 ` [Qemu-devel] [PATCH v2 RFC 0/8] block: persistent dirty bitmaps Stefan Hajnoczi
2015-06-11 11:22   ` Vladimir Sementsov-Ogievskiy
2015-06-11 13:14     ` Stefan Hajnoczi
2015-06-11 20:06 ` Stefan Hajnoczi
2015-06-12  9:58   ` Denis V. Lunev
2015-06-12 10:36     ` Stefan Hajnoczi
2015-08-26  6:26       ` Vladimir Sementsov-Ogievskiy
2015-08-26  9:13         ` Stefan Hajnoczi
2015-06-12 19:34 ` John Snow
2015-06-17 14:29   ` Vladimir Sementsov-Ogievskiy
2015-06-24  0:21     ` John Snow
2015-07-08 12:24       ` Vladimir Sementsov-Ogievskiy
2015-07-08 15:21         ` John Snow
2015-08-27 10:08       ` Vladimir Sementsov-Ogievskiy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5579B8F1.4040606@redhat.com \
    --to=jsnow@redhat.com \
    --cc=den@openvz.org \
    --cc=kwolf@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    --cc=vsementsov@parallels.com \
    --cc=vsementsov@virtuozzo.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).