From: Eric Auger <eric.auger@linaro.org>
To: Peter Maydell <peter.maydell@linaro.org>
Cc: b.reynal@virtualopensystems.com,
Peter Crosthwaite <peter.crosthwaite@xilinx.com>,
eric.auger@st.com, vikrams@codeaurora.org,
Patch Tracking <patches@linaro.org>,
QEMU Developers <qemu-devel@nongnu.org>,
Alex Williamson <alex.williamson@redhat.com>,
Paolo Bonzini <pbonzini@redhat.com>,
Christoffer Dall <christoffer.dall@linaro.org>
Subject: Re: [Qemu-devel] [RESEND PATCH v16 3/6] kvm-all.c: add qemu_irq/gsi hash table and utility routines
Date: Fri, 26 Jun 2015 13:56:00 +0200 [thread overview]
Message-ID: <558D3DD0.6060200@linaro.org> (raw)
In-Reply-To: <CAFEAcA-CZeokMRtGptQ2RZ=2CtTOhd8rFoNxndCeTfhV96pX-g@mail.gmail.com>
Hi Peter,
On 06/26/2015 01:41 PM, Peter Maydell wrote:
> On 15 June 2015 at 17:33, Eric Auger <eric.auger@linaro.org> wrote:
>> VFIO platform device needs to setup irqfd but it does not know the
>> gsi corresponding to the device qemu_irq. This series proposes to
>> store a hash table in kvm_state using the qemu_irq as key and the gsi
>> as a value.
>>
>> kvm_irqchip_set_qemuirq_gsi allows to insert such a pair. The interrupt
>> controller is supposed to use it.
>>
>> kvm_irqchip_[add, remove]_irqfd_notifier allows to setup/tear down
>> irqfd directly from the qemu_irq.
>>
>> Signed-off-by: Eric Auger <eric.auger@linaro.org>
>> Tested-by: Vikram Sethi <vikrams@codeaurora.org>
>>
>> ---
>>
>> v15 -> v16:
>> - Added Vikram's T-b
>>
>> v13 -> v14:
>> - correct checkpatch warning
>>
>> v2 -> v3 (integration into VFIO series v13):
>> - rename kvm_irqchip_[add, remove]_qemuirq_irqfd_notifier into
>> kvm_irqchip_[add, remove]_irqfd_notifier. Possible since legacy
>> functions were also renamed with _gsi suffix.
>>
>> V1 -> v2:
>> - qemu_irq get_gsi callback replaced by hash table stored in kvm
>> ---
>> include/sysemu/kvm.h | 6 ++++++
>> kvm-all.c | 37 +++++++++++++++++++++++++++++++++++++
>> 2 files changed, 43 insertions(+)
>>
>> diff --git a/include/sysemu/kvm.h b/include/sysemu/kvm.h
>> index acb3025..ba612fc 100644
>> --- a/include/sysemu/kvm.h
>> +++ b/include/sysemu/kvm.h
>> @@ -19,6 +19,7 @@
>> #include "qemu/queue.h"
>> #include "qom/cpu.h"
>> #include "exec/memattrs.h"
>> +#include "hw/irq.h"
>>
>> #ifdef CONFIG_KVM
>> #include <linux/kvm.h>
>> @@ -420,6 +421,11 @@ int kvm_irqchip_add_irqfd_notifier_gsi(KVMState *s, EventNotifier *n,
>> EventNotifier *rn, int virq);
>> int kvm_irqchip_remove_irqfd_notifier_gsi(KVMState *s, EventNotifier *n,
>> int virq);
>> +int kvm_irqchip_add_irqfd_notifier(KVMState *s, EventNotifier *n,
>> + EventNotifier *rn, qemu_irq irq);
>> +int kvm_irqchip_remove_irqfd_notifier(KVMState *s, EventNotifier *n,
>> + qemu_irq irq);
>> +void kvm_irqchip_set_qemuirq_gsi(KVMState *s, qemu_irq irq, int gsi);
>> void kvm_pc_gsi_handler(void *opaque, int n, int level);
>> void kvm_pc_setup_irq_routing(bool pci_enabled);
>> void kvm_init_irq_routing(KVMState *s);
>> diff --git a/kvm-all.c b/kvm-all.c
>> index 730b818..939bfc4 100644
>> --- a/kvm-all.c
>> +++ b/kvm-all.c
>> @@ -37,6 +37,7 @@
>> #include "exec/address-spaces.h"
>> #include "qemu/event_notifier.h"
>> #include "trace.h"
>> +#include "hw/irq.h"
>>
>> #include "hw/boards.h"
>>
>> @@ -98,6 +99,7 @@ struct KVMState
>> * unsigned, and treating them as signed here can break things */
>> unsigned irq_set_ioctl;
>> unsigned int sigmask_len;
>> + GHashTable *gsimap;
>> #ifdef KVM_CAP_IRQ_ROUTING
>> struct kvm_irq_routing *irq_routes;
>> int nr_allocated_irq_routes;
>> @@ -1339,6 +1341,39 @@ int kvm_irqchip_remove_irqfd_notifier_gsi(KVMState *s, EventNotifier *n,
>> false);
>> }
>>
>> +int kvm_irqchip_add_irqfd_notifier(KVMState *s, EventNotifier *n,
>> + EventNotifier *rn, qemu_irq irq)
>> +{
>> + gpointer key, gsi;
>> + gboolean found = g_hash_table_lookup_extended(s->gsimap, irq, &key, &gsi);
>> +
>> + if (!found) {
>> + return -ENXIO;
>> + } else {
>> + return kvm_irqchip_add_irqfd_notifier_gsi(s, n, rn,
>> + GPOINTER_TO_UINT(gsi));
>
> Why do we use GPOINTER_TO_UINT() here...
Hum yes GPOINTER_TO_INT is in accordance with
kvm_irqchip_add_irqfd_notifier_gsi signature
>
>
>> + }
>> +}
>> +
>> +int kvm_irqchip_remove_irqfd_notifier(KVMState *s, EventNotifier *n,
>> + qemu_irq irq)
>> +{
>> + gpointer key, gsi;
>> + gboolean found = g_hash_table_lookup_extended(s->gsimap, irq, &key, &gsi);
>> +
>> + if (!found) {
>> + return -ENXIO;
>> + } else {
>> + return kvm_irqchip_remove_irqfd_notifier_gsi(s, n,
>> + GPOINTER_TO_INT(gsi));
>
> ...but GPOINTER_TO_INT() here?
>
> (Aside: you don't need to put this code in an else {} clause, because
> the if() part is returning anyway.)
Indeed.
Do you wish I re-submit all the VFIO remaining patches as v17 or only
that one?
Thanks
Eric
>
>> + }
>> +}
>> +
>> +void kvm_irqchip_set_qemuirq_gsi(KVMState *s, qemu_irq irq, int gsi)
>> +{
>> + g_hash_table_insert(s->gsimap, irq, GINT_TO_POINTER(gsi));
>> +}
>> +
>> static int kvm_irqchip_create(MachineState *machine, KVMState *s)
>> {
>> int ret;
>> @@ -1371,6 +1406,8 @@ static int kvm_irqchip_create(MachineState *machine, KVMState *s)
>>
>> kvm_init_irq_routing(s);
>>
>> + s->gsimap = g_hash_table_new(g_direct_hash, g_direct_equal);
>> +
>> return 0;
>> }
>
> thanks
> -- PMM
>
next prev parent reply other threads:[~2015-06-26 11:56 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-15 16:33 [Qemu-devel] [RESEND PATCH v16 0/6] KVM platform device passthrough Eric Auger
2015-06-15 16:33 ` [Qemu-devel] [RESEND PATCH v16 1/6] hw/arm/sysbus-fdt: enable vfio-calxeda-xgmac dynamic instantiation Eric Auger
2015-06-16 8:29 ` Peter Maydell
2015-06-16 8:44 ` Eric Auger
2015-06-16 8:57 ` Peter Maydell
2015-06-15 16:33 ` [Qemu-devel] [RESEND PATCH v16 2/6] kvm: rename kvm_irqchip_[add, remove]_irqfd_notifier with gsi suffix Eric Auger
2015-06-24 9:53 ` Paolo Bonzini
2015-06-15 16:33 ` [Qemu-devel] [RESEND PATCH v16 3/6] kvm-all.c: add qemu_irq/gsi hash table and utility routines Eric Auger
2015-06-24 9:53 ` Paolo Bonzini
2015-06-26 11:41 ` Peter Maydell
2015-06-26 11:56 ` Eric Auger [this message]
2015-06-15 16:33 ` [Qemu-devel] [RESEND PATCH v16 4/6] intc: arm_gic_kvm: set the qemu_irq/gsi mapping Eric Auger
2015-06-24 9:54 ` Paolo Bonzini
2015-06-26 11:43 ` Peter Maydell
2015-06-26 11:59 ` Eric Auger
2015-06-15 16:33 ` [Qemu-devel] [RESEND PATCH v16 5/6] sysbus: add irq_routing_notifier Eric Auger
2015-06-15 16:33 ` [Qemu-devel] [RESEND PATCH v16 6/6] hw/vfio/platform: add irqfd support Eric Auger
2015-06-26 11:57 ` Peter Maydell
2015-06-26 12:19 ` Eric Auger
2015-06-26 16:21 ` Alex Williamson
2015-06-26 16:26 ` Paolo Bonzini
2015-06-26 16:31 ` Eric Auger
2015-06-26 16:46 ` Alex Williamson
2015-06-22 7:56 ` [Qemu-devel] [RESEND PATCH v16 0/6] KVM platform device passthrough Eric Auger
2015-06-24 9:55 ` Paolo Bonzini
2015-06-24 9:59 ` Eric Auger
2015-06-24 10:10 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=558D3DD0.6060200@linaro.org \
--to=eric.auger@linaro.org \
--cc=alex.williamson@redhat.com \
--cc=b.reynal@virtualopensystems.com \
--cc=christoffer.dall@linaro.org \
--cc=eric.auger@st.com \
--cc=patches@linaro.org \
--cc=pbonzini@redhat.com \
--cc=peter.crosthwaite@xilinx.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=vikrams@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).