qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Richard Henderson <rth@twiddle.net>
To: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>, qemu-devel@nongnu.org
Cc: pbonzini@redhat.com, leon.alrae@imgtec.com, agraf@suse.de,
	aurelien@aurel32.net
Subject: Re: [Qemu-devel] [PATCH v6 09/10] target-i386: exception handling for other helper functions
Date: Tue, 7 Jul 2015 16:08:55 +0100	[thread overview]
Message-ID: <559BEB87.1060004@twiddle.net> (raw)
In-Reply-To: <20150707133147.11808.6525.stgit@PASHA-ISP.def.inno>

On 07/07/2015 02:31 PM, Pavel Dovgalyuk wrote:
> diff --git a/target-i386/misc_helper.c b/target-i386/misc_helper.c
> index 52c5d65..c8e7ee9 100644
> --- a/target-i386/misc_helper.c
> +++ b/target-i386/misc_helper.c
> @@ -220,7 +220,7 @@ void helper_rdtsc(CPUX86State *env)
>       uint64_t val;
>
>       if ((env->cr[4] & CR4_TSD_MASK) && ((env->hflags & HF_CPL_MASK) != 0)) {
> -        raise_exception(env, EXCP0D_GPF);
> +        raise_exception_ra(env, EXCP0D_GPF, GETPC());
>       }
>       cpu_svm_check_intercept_param(env, SVM_EXIT_RDTSC, 0);
>
> @@ -238,13 +238,13 @@ void helper_rdtscp(CPUX86State *env)
>   void helper_rdpmc(CPUX86State *env)
>   {
>       if ((env->cr[4] & CR4_PCE_MASK) && ((env->hflags & HF_CPL_MASK) != 0)) {
> -        raise_exception(env, EXCP0D_GPF);
> +        raise_exception_ra(env, EXCP0D_GPF, GETPC());
>       }
>       cpu_svm_check_intercept_param(env, SVM_EXIT_RDPMC, 0);
>
>       /* currently unimplemented */
>       qemu_log_mask(LOG_UNIMP, "x86: unimplemented rdpmc\n");
> -    raise_exception_err(env, EXCP06_ILLOP, 0);
> +    raise_exception_err_ra(env, EXCP06_ILLOP, 0, GETPC());
>   }
>
>   #if defined(CONFIG_USER_ONLY)
> @@ -589,7 +589,7 @@ void helper_hlt(CPUX86State *env, int next_eip_addend)
>   void helper_monitor(CPUX86State *env, target_ulong ptr)
>   {
>       if ((uint32_t)env->regs[R_ECX] != 0) {
> -        raise_exception(env, EXCP0D_GPF);
> +        raise_exception_ra(env, EXCP0D_GPF, GETPC());
>       }
>       /* XXX: store address? */
>       cpu_svm_check_intercept_param(env, SVM_EXIT_MONITOR, 0);

Likewise.

> @@ -601,7 +601,7 @@ void helper_mwait(CPUX86State *env, int next_eip_addend)
>       X86CPU *cpu;
>
>       if ((uint32_t)env->regs[R_ECX] != 0) {
> -        raise_exception(env, EXCP0D_GPF);
> +        raise_exception_ra(env, EXCP0D_GPF, GETPC());
>       }
>       cpu_svm_check_intercept_param(env, SVM_EXIT_MWAIT, 0);
>       env->eip += next_eip_addend;

Similar to lcall/ljmp, this can be switched to not use an addend.

> diff --git a/target-i386/svm_helper.c b/target-i386/svm_helper.c
> index f1fabf5..cc8c2ec 100644
> --- a/target-i386/svm_helper.c
> +++ b/target-i386/svm_helper.c
> @@ -354,7 +354,7 @@ void helper_vmrun(CPUX86State *env, int aflag, int next_eip_addend)
>   void helper_vmmcall(CPUX86State *env)
>   {
>       cpu_svm_check_intercept_param(env, SVM_EXIT_VMMCALL, 0);
> -    raise_exception(env, EXCP06_ILLOP);
> +    raise_exception_ra(env, EXCP06_ILLOP, GETPC());
>   }
>
>   void helper_vmload(CPUX86State *env, int aflag)
> @@ -457,7 +457,7 @@ void helper_skinit(CPUX86State *env)
>   {
>       cpu_svm_check_intercept_param(env, SVM_EXIT_SKINIT, 0);
>       /* XXX: not implemented */
> -    raise_exception(env, EXCP06_ILLOP);
> +    raise_exception_ra(env, EXCP06_ILLOP, GETPC());
>   }

Either these are missing a change to translate.c, or they're pointless changes. 
  Probably the later.


r~

  reply	other threads:[~2015-07-07 15:09 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-07 13:30 [Qemu-devel] [PATCH v6 00/10] Fix exceptions handling for MIPS, PowerPC, and i386 Pavel Dovgalyuk
2015-07-07 13:31 ` [Qemu-devel] [PATCH v6 01/10] softmmu: add helper function to pass through retaddr Pavel Dovgalyuk
2015-07-07 14:28   ` Richard Henderson
2015-07-09 15:28   ` Aurelien Jarno
2015-07-07 13:31 ` [Qemu-devel] [PATCH v6 02/10] cpu-exec: introduce loop exit with restore function Pavel Dovgalyuk
2015-07-07 13:31 ` [Qemu-devel] [PATCH v6 03/10] target-mips: improve exception handling Pavel Dovgalyuk
2015-07-07 13:31 ` [Qemu-devel] [PATCH v6 04/10] target-i386: introduce new raise_exception functions Pavel Dovgalyuk
2015-07-07 14:28   ` Richard Henderson
2015-07-07 13:31 ` [Qemu-devel] [PATCH v6 05/10] target-i386: exception handling for FPU instructions Pavel Dovgalyuk
2015-07-07 14:28   ` Richard Henderson
2015-07-07 13:31 ` [Qemu-devel] [PATCH v6 06/10] target-i386: exception handling for div instructions Pavel Dovgalyuk
2015-07-07 13:31 ` [Qemu-devel] [PATCH v6 07/10] target-i386: exception handling for memory helpers Pavel Dovgalyuk
2015-07-07 13:31 ` [Qemu-devel] [PATCH v6 08/10] target-i386: exception handling for seg_helper functions Pavel Dovgalyuk
2015-07-07 14:44   ` Richard Henderson
2015-07-07 13:31 ` [Qemu-devel] [PATCH v6 09/10] target-i386: exception handling for other helper functions Pavel Dovgalyuk
2015-07-07 15:08   ` Richard Henderson [this message]
2015-07-08  9:46     ` Pavel Dovgaluk
2015-07-09  6:54       ` Richard Henderson
2015-07-07 13:31 ` [Qemu-devel] [PATCH v6 10/10] target-ppc: exceptions handling in icount mode Pavel Dovgalyuk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=559BEB87.1060004@twiddle.net \
    --to=rth@twiddle.net \
    --cc=Pavel.Dovgaluk@ispras.ru \
    --cc=agraf@suse.de \
    --cc=aurelien@aurel32.net \
    --cc=leon.alrae@imgtec.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).