* [Qemu-devel] [PATCH v3 00/16] Add an IPMI device to QEMU
@ 2015-06-09 1:11 minyard
2015-06-09 1:11 ` [Qemu-devel] [PATCH v3 01/16] Add a base IPMI interface minyard
` (18 more replies)
0 siblings, 19 replies; 31+ messages in thread
From: minyard @ 2015-06-09 1:11 UTC (permalink / raw)
To: qemu-devel
I have reworked the QEMU IPMI patches, and I believe this design
improves greatly on the previous one. The suggestions made all
resulted in better design. To start an IPMI interface
with this, you would use:
-device ipmi-bmc-sim,id=bmc0 -device isa-ipmi-bt,bmc=bmc0
Note that I did not make the BMCs objects. I started this way, but
adding properties was ending up duplicating a lot of code already
in the device core, especially for the chardev link.
I'm not sure of the importance of having a BMC be an object instead
of a device, but it seems to me that if we do that, it would be
best to add helper functions to the object core for the chardev
and integer properties.
Thanks,
-corey
^ permalink raw reply [flat|nested] 31+ messages in thread
* [Qemu-devel] [PATCH v3 01/16] Add a base IPMI interface
2015-06-09 1:11 [Qemu-devel] [PATCH v3 00/16] Add an IPMI device to QEMU minyard
@ 2015-06-09 1:11 ` minyard
2015-06-09 1:11 ` [Qemu-devel] [PATCH v3 02/16] ipmi: Add a local BMC simulation minyard
` (17 subsequent siblings)
18 siblings, 0 replies; 31+ messages in thread
From: minyard @ 2015-06-09 1:11 UTC (permalink / raw)
To: qemu-devel; +Cc: Corey Minyard
From: Corey Minyard <cminyard@mvista.com>
Add the basic IPMI types and infrastructure to QEMU. Low-level
interfaces and simulation interfaces will register with this; it's
kind of the go-between to tie them together.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
---
default-configs/i386-softmmu.mak | 1 +
default-configs/x86_64-softmmu.mak | 1 +
hw/Makefile.objs | 1 +
hw/ipmi/Makefile.objs | 1 +
hw/ipmi/ipmi.c | 125 ++++++++++++++++++++++++++
include/hw/ipmi/ipmi.h | 178 +++++++++++++++++++++++++++++++++++++
qemu-doc.texi | 2 +
7 files changed, 309 insertions(+)
create mode 100644 hw/ipmi/Makefile.objs
create mode 100644 hw/ipmi/ipmi.c
create mode 100644 include/hw/ipmi/ipmi.h
diff --git a/default-configs/i386-softmmu.mak b/default-configs/i386-softmmu.mak
index 6a74e00..ab1a552 100644
--- a/default-configs/i386-softmmu.mak
+++ b/default-configs/i386-softmmu.mak
@@ -8,6 +8,7 @@ CONFIG_VGA_ISA=y
CONFIG_VGA_CIRRUS=y
CONFIG_VMWARE_VGA=y
CONFIG_VMMOUSE=y
+CONFIG_IPMI=y
CONFIG_SERIAL=y
CONFIG_PARALLEL=y
CONFIG_I8254=y
diff --git a/default-configs/x86_64-softmmu.mak b/default-configs/x86_64-softmmu.mak
index 46b87dd..82bafcc 100644
--- a/default-configs/x86_64-softmmu.mak
+++ b/default-configs/x86_64-softmmu.mak
@@ -8,6 +8,7 @@ CONFIG_VGA_ISA=y
CONFIG_VGA_CIRRUS=y
CONFIG_VMWARE_VGA=y
CONFIG_VMMOUSE=y
+CONFIG_IPMI=y
CONFIG_SERIAL=y
CONFIG_PARALLEL=y
CONFIG_I8254=y
diff --git a/hw/Makefile.objs b/hw/Makefile.objs
index 73afa41..ce320c5 100644
--- a/hw/Makefile.objs
+++ b/hw/Makefile.objs
@@ -13,6 +13,7 @@ devices-dirs-$(CONFIG_SOFTMMU) += ide/
devices-dirs-$(CONFIG_SOFTMMU) += input/
devices-dirs-$(CONFIG_SOFTMMU) += intc/
devices-dirs-$(CONFIG_IPACK) += ipack/
+devices-dirs-$(CONFIG_IPMI) += ipmi/
devices-dirs-$(CONFIG_SOFTMMU) += isa/
devices-dirs-$(CONFIG_SOFTMMU) += misc/
devices-dirs-$(CONFIG_SOFTMMU) += net/
diff --git a/hw/ipmi/Makefile.objs b/hw/ipmi/Makefile.objs
new file mode 100644
index 0000000..65bde11
--- /dev/null
+++ b/hw/ipmi/Makefile.objs
@@ -0,0 +1 @@
+common-obj-$(CONFIG_IPMI) += ipmi.o
diff --git a/hw/ipmi/ipmi.c b/hw/ipmi/ipmi.c
new file mode 100644
index 0000000..7d17469
--- /dev/null
+++ b/hw/ipmi/ipmi.c
@@ -0,0 +1,125 @@
+/*
+ * QEMU IPMI emulation
+ *
+ * Copyright (c) 2015 Corey Minyard, MontaVista Software, LLC
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "hw/hw.h"
+#include "hw/ipmi/ipmi.h"
+#include "sysemu/sysemu.h"
+#include "qmp-commands.h"
+#include "qom/object_interfaces.h"
+#include "qapi/visitor.h"
+
+static int ipmi_do_hw_op(IPMIInterface *s, enum ipmi_op op, int checkonly)
+{
+ switch (op) {
+ case IPMI_RESET_CHASSIS:
+ if (checkonly) {
+ return 0;
+ }
+ qemu_system_reset_request();
+ return 0;
+
+ case IPMI_POWEROFF_CHASSIS:
+ if (checkonly) {
+ return 0;
+ }
+ qemu_system_powerdown_request();
+ return 0;
+
+ case IPMI_SEND_NMI:
+ if (checkonly) {
+ return 0;
+ }
+ qemu_mutex_lock_iothread();
+ qmp_inject_nmi(NULL);
+ qemu_mutex_unlock_iothread();
+ return 0;
+
+ case IPMI_POWERCYCLE_CHASSIS:
+ case IPMI_PULSE_DIAG_IRQ:
+ case IPMI_SHUTDOWN_VIA_ACPI_OVERTEMP:
+ case IPMI_POWERON_CHASSIS:
+ default:
+ return IPMI_CC_COMMAND_NOT_SUPPORTED;
+ }
+}
+
+static void ipmi_interface_class_init(ObjectClass *class, void *data)
+{
+ IPMIInterfaceClass *ik = IPMI_INTERFACE_CLASS(class);
+
+ ik->do_hw_op = ipmi_do_hw_op;
+}
+
+static TypeInfo ipmi_interface_type_info = {
+ .name = TYPE_IPMI_INTERFACE,
+ .parent = TYPE_INTERFACE,
+ .class_size = sizeof(IPMIInterfaceClass),
+ .class_init = ipmi_interface_class_init,
+};
+
+static void isa_ipmi_bmc_check(Object *obj, const char *name,
+ Object *val, Error **errp)
+{
+ IPMIBmc *bmc = IPMI_BMC(val);
+
+ if (bmc->intf)
+ error_setg(errp, "BMC object is already in use");
+}
+
+void ipmi_bmc_find_and_link(Object *obj, Object **bmc)
+{
+ object_property_add_link(obj, "bmc", TYPE_IPMI_BMC, bmc,
+ isa_ipmi_bmc_check,
+ OBJ_PROP_LINK_UNREF_ON_RELEASE,
+ &error_abort);
+}
+
+static Property ipmi_bmc_properties[] = {
+ DEFINE_PROP_UINT8("slave_addr", IPMIBmc, slave_addr, 0x20),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void bmc_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+
+ dc->props = ipmi_bmc_properties;
+}
+
+static TypeInfo ipmi_bmc_type_info = {
+ .name = TYPE_IPMI_BMC,
+ .parent = TYPE_DEVICE,
+ .instance_size = sizeof(IPMIBmc),
+ .abstract = true,
+ .class_size = sizeof(IPMIBmcClass),
+ .class_init = bmc_class_init,
+};
+
+static void ipmi_register_types(void)
+{
+ type_register_static(&ipmi_interface_type_info);
+ type_register_static(&ipmi_bmc_type_info);
+}
+
+type_init(ipmi_register_types)
diff --git a/include/hw/ipmi/ipmi.h b/include/hw/ipmi/ipmi.h
new file mode 100644
index 0000000..e4f7738
--- /dev/null
+++ b/include/hw/ipmi/ipmi.h
@@ -0,0 +1,178 @@
+/*
+ * IPMI base class
+ *
+ * Copyright (c) 2015 Corey Minyard, MontaVista Software, LLC
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef HW_IPMI_H
+#define HW_IPMI_H
+
+#include "exec/memory.h"
+#include "qemu-common.h"
+#include "hw/qdev.h"
+
+#define MAX_IPMI_MSG_SIZE 300
+
+enum ipmi_op {
+ IPMI_RESET_CHASSIS,
+ IPMI_POWEROFF_CHASSIS,
+ IPMI_POWERON_CHASSIS,
+ IPMI_POWERCYCLE_CHASSIS,
+ IPMI_PULSE_DIAG_IRQ,
+ IPMI_SHUTDOWN_VIA_ACPI_OVERTEMP,
+ IPMI_SEND_NMI
+};
+
+#define IPMI_CC_INVALID_CMD 0xc1
+#define IPMI_CC_COMMAND_INVALID_FOR_LUN 0xc2
+#define IPMI_CC_TIMEOUT 0xc3
+#define IPMI_CC_OUT_OF_SPACE 0xc4
+#define IPMI_CC_INVALID_RESERVATION 0xc5
+#define IPMI_CC_REQUEST_DATA_TRUNCATED 0xc6
+#define IPMI_CC_REQUEST_DATA_LENGTH_INVALID 0xc7
+#define IPMI_CC_PARM_OUT_OF_RANGE 0xc9
+#define IPMI_CC_CANNOT_RETURN_REQ_NUM_BYTES 0xca
+#define IPMI_CC_REQ_ENTRY_NOT_PRESENT 0xcb
+#define IPMI_CC_INVALID_DATA_FIELD 0xcc
+#define IPMI_CC_BMC_INIT_IN_PROGRESS 0xd2
+#define IPMI_CC_COMMAND_NOT_SUPPORTED 0xd5
+
+#define IPMI_NETFN_APP 0x06
+
+#define IPMI_DEBUG 1
+
+/* Specified in the SMBIOS spec. */
+#define IPMI_SMBIOS_KCS 0x01
+#define IPMI_SMBIOS_SMIC 0x02
+#define IPMI_SMBIOS_BT 0x03
+#define IPMI_SMBIOS_SSIF 0x04
+
+/* IPMI Interface types (KCS, SMIC, BT) are prefixed with this */
+#define TYPE_IPMI_INTERFACE_PREFIX "ipmi-interface-"
+
+/*
+ * An IPMI Interface, the interface for talking between the target
+ * and the BMC.
+ */
+#define TYPE_IPMI_INTERFACE "ipmi-interface"
+#define IPMI_INTERFACE(obj) \
+ INTERFACE_CHECK(IPMIInterface, (obj), TYPE_IPMI_INTERFACE)
+#define IPMI_INTERFACE_CLASS(class) \
+ OBJECT_CLASS_CHECK(IPMIInterfaceClass, (class), TYPE_IPMI_INTERFACE)
+#define IPMI_INTERFACE_GET_CLASS(class) \
+ OBJECT_GET_CLASS(IPMIInterfaceClass, (class), TYPE_IPMI_INTERFACE)
+
+typedef struct IPMIInterface {
+ Object parent;
+} IPMIInterface;
+
+typedef struct IPMIInterfaceClass {
+ InterfaceClass parent;
+
+ void (*init)(struct IPMIInterface *s, Error **errp);
+
+ /*
+ * Perform various operations on the hardware. If checkonly is
+ * true, it will return if the operation can be performed, but it
+ * will not do the operation.
+ */
+ int (*do_hw_op)(struct IPMIInterface *s, enum ipmi_op op, int checkonly);
+
+ /*
+ * Enable/disable irqs on the interface when the BMC requests this.
+ */
+ void (*set_irq_enable)(struct IPMIInterface *s, int val);
+
+ /*
+ * Handle an event that occurred on the interface, generally the.
+ * target writing to a register.
+ */
+ void (*handle_if_event)(struct IPMIInterface *s);
+
+ /*
+ * The interfaces use this to perform certain ops
+ */
+ void (*set_atn)(struct IPMIInterface *s, int val, int irq);
+
+ /*
+ * Got an IPMI warm/cold reset.
+ */
+ void (*reset)(struct IPMIInterface *s, bool is_cold);
+
+ /*
+ * Handle a response from the bmc.
+ */
+ void (*handle_rsp)(struct IPMIInterface *s, uint8_t msg_id,
+ unsigned char *rsp, unsigned int rsp_len);
+
+ /*
+ * Set by the owner to hold the backend data for the interface.
+ */
+ void *(*get_backend_data)(struct IPMIInterface *s);
+} IPMIInterfaceClass;
+
+/*
+ * Define a BMC simulator (or perhaps a connection to a real BMC)
+ */
+#define TYPE_IPMI_BMC "ipmi-bmc"
+#define IPMI_BMC(obj) \
+ OBJECT_CHECK(IPMIBmc, (obj), TYPE_IPMI_BMC)
+#define IPMI_BMC_CLASS(obj_class) \
+ OBJECT_CLASS_CHECK(IPMIBmcClass, (obj_class), TYPE_IPMI_BMC)
+#define IPMI_BMC_GET_CLASS(obj) \
+ OBJECT_GET_CLASS(IPMIBmcClass, (obj), TYPE_IPMI_BMC)
+
+typedef struct IPMIBmc {
+ DeviceState parent;
+
+ uint8_t slave_addr;
+
+ IPMIInterface *intf;
+} IPMIBmc;
+
+typedef struct IPMIBmcClass {
+ DeviceClass parent;
+
+ /* Called when the system resets to report to the bmc. */
+ void (*handle_reset)(struct IPMIBmc *s);
+
+ /*
+ * Handle a command to the bmc.
+ */
+ void (*handle_command)(struct IPMIBmc *s,
+ uint8_t *cmd, unsigned int cmd_len,
+ unsigned int max_cmd_len,
+ uint8_t msg_id);
+} IPMIBmcClass;
+
+/*
+ * Add a link property to obj that points to a BMC.
+ */
+void ipmi_bmc_find_and_link(Object *obj, Object **bmc);
+
+#ifdef IPMI_DEBUG
+#define ipmi_debug(fs, ...) \
+ fprintf(stderr, "IPMI (%s): " fs, __func__, ##__VA_ARGS__)
+#else
+#define ipmi_debug(fs, ...)
+#endif
+
+#endif
diff --git a/qemu-doc.texi b/qemu-doc.texi
index 0125bc7..80a22a4 100644
--- a/qemu-doc.texi
+++ b/qemu-doc.texi
@@ -195,6 +195,8 @@ PCI and ISA network adapters
@item
Serial ports
@item
+IPMI BMC, either and internal or external one
+@item
Creative SoundBlaster 16 sound card
@item
ENSONIQ AudioPCI ES1370 sound card
--
1.8.3.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [Qemu-devel] [PATCH v3 02/16] ipmi: Add a local BMC simulation
2015-06-09 1:11 [Qemu-devel] [PATCH v3 00/16] Add an IPMI device to QEMU minyard
2015-06-09 1:11 ` [Qemu-devel] [PATCH v3 01/16] Add a base IPMI interface minyard
@ 2015-06-09 1:11 ` minyard
2015-06-09 1:11 ` [Qemu-devel] [PATCH v3 03/16] ipmi: Add an external connection simulation interface minyard
` (16 subsequent siblings)
18 siblings, 0 replies; 31+ messages in thread
From: minyard @ 2015-06-09 1:11 UTC (permalink / raw)
To: qemu-devel; +Cc: Corey Minyard
From: Corey Minyard <cminyard@mvista.com>
This provides a minimal local BMC, basically enough to comply with the
spec and provide a complete watchdog timer (including a sensor, SDR,
and event).
Signed-off-by: Corey Minyard <cminyard@mvista.com>
---
default-configs/i386-softmmu.mak | 1 +
default-configs/x86_64-softmmu.mak | 1 +
hw/ipmi/Makefile.objs | 1 +
hw/ipmi/ipmi_bmc_sim.c | 1731 ++++++++++++++++++++++++++++++++++++
4 files changed, 1734 insertions(+)
create mode 100644 hw/ipmi/ipmi_bmc_sim.c
diff --git a/default-configs/i386-softmmu.mak b/default-configs/i386-softmmu.mak
index ab1a552..25fce7d 100644
--- a/default-configs/i386-softmmu.mak
+++ b/default-configs/i386-softmmu.mak
@@ -9,6 +9,7 @@ CONFIG_VGA_CIRRUS=y
CONFIG_VMWARE_VGA=y
CONFIG_VMMOUSE=y
CONFIG_IPMI=y
+CONFIG_IPMI_LOCAL=y
CONFIG_SERIAL=y
CONFIG_PARALLEL=y
CONFIG_I8254=y
diff --git a/default-configs/x86_64-softmmu.mak b/default-configs/x86_64-softmmu.mak
index 82bafcc..2179574 100644
--- a/default-configs/x86_64-softmmu.mak
+++ b/default-configs/x86_64-softmmu.mak
@@ -9,6 +9,7 @@ CONFIG_VGA_CIRRUS=y
CONFIG_VMWARE_VGA=y
CONFIG_VMMOUSE=y
CONFIG_IPMI=y
+CONFIG_IPMI_LOCAL=y
CONFIG_SERIAL=y
CONFIG_PARALLEL=y
CONFIG_I8254=y
diff --git a/hw/ipmi/Makefile.objs b/hw/ipmi/Makefile.objs
index 65bde11..875271c 100644
--- a/hw/ipmi/Makefile.objs
+++ b/hw/ipmi/Makefile.objs
@@ -1 +1,2 @@
common-obj-$(CONFIG_IPMI) += ipmi.o
+common-obj-$(CONFIG_IPMI_LOCAL) += ipmi_bmc_sim.o
diff --git a/hw/ipmi/ipmi_bmc_sim.c b/hw/ipmi/ipmi_bmc_sim.c
new file mode 100644
index 0000000..d246029
--- /dev/null
+++ b/hw/ipmi/ipmi_bmc_sim.c
@@ -0,0 +1,1731 @@
+/*
+ * IPMI BMC emulation
+ *
+ * Copyright (c) 2015 Corey Minyard, MontaVista Software, LLC
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <stdint.h>
+#include "qemu/timer.h"
+#include "hw/ipmi/ipmi.h"
+#include "qemu/error-report.h"
+
+#define IPMI_NETFN_CHASSIS 0x00
+#define IPMI_NETFN_CHASSIS_MAXCMD 0x03
+
+#define IPMI_CMD_GET_CHASSIS_CAPABILITIES 0x00
+#define IPMI_CMD_GET_CHASSIS_STATUS 0x01
+#define IPMI_CMD_CHASSIS_CONTROL 0x02
+
+#define IPMI_NETFN_SENSOR_EVENT 0x04
+#define IPMI_NETFN_SENSOR_EVENT_MAXCMD 0x2e
+
+#define IPMI_CMD_SET_SENSOR_EVT_ENABLE 0x28
+#define IPMI_CMD_GET_SENSOR_EVT_ENABLE 0x29
+#define IPMI_CMD_REARM_SENSOR_EVTS 0x2a
+#define IPMI_CMD_GET_SENSOR_EVT_STATUS 0x2b
+#define IPMI_CMD_GET_SENSOR_READING 0x2d
+
+/* #define IPMI_NETFN_APP 0x06 In ipmi.h */
+#define IPMI_NETFN_APP_MAXCMD 0x36
+
+#define IPMI_CMD_GET_DEVICE_ID 0x01
+#define IPMI_CMD_COLD_RESET 0x02
+#define IPMI_CMD_WARM_RESET 0x03
+#define IPMI_CMD_RESET_WATCHDOG_TIMER 0x22
+#define IPMI_CMD_SET_WATCHDOG_TIMER 0x24
+#define IPMI_CMD_GET_WATCHDOG_TIMER 0x25
+#define IPMI_CMD_SET_BMC_GLOBAL_ENABLES 0x2e
+#define IPMI_CMD_GET_BMC_GLOBAL_ENABLES 0x2f
+#define IPMI_CMD_CLR_MSG_FLAGS 0x30
+#define IPMI_CMD_GET_MSG_FLAGS 0x31
+#define IPMI_CMD_GET_MSG 0x33
+#define IPMI_CMD_SEND_MSG 0x34
+#define IPMI_CMD_READ_EVT_MSG_BUF 0x35
+
+#define IPMI_NETFN_STORAGE 0x0a
+#define IPMI_NETFN_STORAGE_MAXCMD 0x4a
+
+#define IPMI_CMD_GET_SDR_REP_INFO 0x20
+#define IPMI_CMD_GET_SDR_REP_ALLOC_INFO 0x21
+#define IPMI_CMD_RESERVE_SDR_REP 0x22
+#define IPMI_CMD_GET_SDR 0x23
+#define IPMI_CMD_ADD_SDR 0x24
+#define IPMI_CMD_PARTIAL_ADD_SDR 0x25
+#define IPMI_CMD_DELETE_SDR 0x26
+#define IPMI_CMD_CLEAR_SDR_REP 0x27
+#define IPMI_CMD_GET_SDR_REP_TIME 0x28
+#define IPMI_CMD_SET_SDR_REP_TIME 0x29
+#define IPMI_CMD_ENTER_SDR_REP_UPD_MODE 0x2A
+#define IPMI_CMD_EXIT_SDR_REP_UPD_MODE 0x2B
+#define IPMI_CMD_RUN_INIT_AGENT 0x2C
+#define IPMI_CMD_GET_SEL_INFO 0x40
+#define IPMI_CMD_GET_SEL_ALLOC_INFO 0x41
+#define IPMI_CMD_RESERVE_SEL 0x42
+#define IPMI_CMD_GET_SEL_ENTRY 0x43
+#define IPMI_CMD_ADD_SEL_ENTRY 0x44
+#define IPMI_CMD_PARTIAL_ADD_SEL_ENTRY 0x45
+#define IPMI_CMD_DELETE_SEL_ENTRY 0x46
+#define IPMI_CMD_CLEAR_SEL 0x47
+#define IPMI_CMD_GET_SEL_TIME 0x48
+#define IPMI_CMD_SET_SEL_TIME 0x49
+
+
+/* Same as a timespec struct. */
+struct ipmi_time {
+ long tv_sec;
+ long tv_nsec;
+};
+
+#define MAX_SEL_SIZE 128
+
+typedef struct IPMISel {
+ uint8_t sel[MAX_SEL_SIZE][16];
+ unsigned int next_free;
+ long time_offset;
+ uint16_t reservation;
+ uint8_t last_addition[4];
+ uint8_t last_clear[4];
+ uint8_t overflow;
+} IPMISel;
+
+#define MAX_SDR_SIZE 16384
+
+typedef struct IPMISdr {
+ uint8_t sdr[MAX_SDR_SIZE];
+ unsigned int next_free;
+ uint16_t next_rec_id;
+ uint16_t reservation;
+ uint8_t last_addition[4];
+ uint8_t last_clear[4];
+ uint8_t overflow;
+} IPMISdr;
+
+typedef struct IPMISensor {
+ uint8_t status;
+ uint8_t reading;
+ uint16_t states_suppt;
+ uint16_t assert_suppt;
+ uint16_t deassert_suppt;
+ uint16_t states;
+ uint16_t assert_states;
+ uint16_t deassert_states;
+ uint16_t assert_enable;
+ uint16_t deassert_enable;
+ uint8_t sensor_type;
+ uint8_t evt_reading_type_code;
+} IPMISensor;
+#define IPMI_SENSOR_GET_PRESENT(s) ((s)->status & 0x01)
+#define IPMI_SENSOR_SET_PRESENT(s, v) ((s)->status = (s->status & ~0x01) | \
+ !!(v))
+#define IPMI_SENSOR_GET_SCAN_ON(s) ((s)->status & 0x40)
+#define IPMI_SENSOR_SET_SCAN_ON(s, v) ((s)->status = (s->status & ~0x40) | \
+ ((!!(v)) << 6))
+#define IPMI_SENSOR_GET_EVENTS_ON(s) ((s)->status & 0x80)
+#define IPMI_SENSOR_SET_EVENTS_ON(s, v) ((s)->status = (s->status & ~0x80) | \
+ ((!!(v)) << 7))
+#define IPMI_SENSOR_GET_RET_STATUS(s) ((s)->status & 0xc0)
+#define IPMI_SENSOR_SET_RET_STATUS(s, v) ((s)->status = (s->status & ~0xc0) | \
+ (v & 0xc0))
+#define IPMI_SENSOR_IS_DISCRETE(s) ((s)->evt_reading_type_code != 1)
+
+#define MAX_SENSORS 20
+#define IPMI_WATCHDOG_SENSOR 0
+
+typedef struct IPMIBmcSim IPMIBmcSim;
+
+#define MAX_NETFNS 64
+typedef void (*IPMICmdHandler)(IPMIBmcSim *s,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len);
+typedef struct IPMINetfn {
+ unsigned int cmd_nums;
+ const IPMICmdHandler *cmd_handlers;
+} IPMINetfn;
+
+typedef struct IPMIRcvBufEntry {
+ QTAILQ_ENTRY(IPMIRcvBufEntry) entry;
+ uint8_t len;
+ uint8_t buf[MAX_IPMI_MSG_SIZE];
+} IPMIRcvBufEntry;
+
+#define TYPE_IPMI_BMC_SIMULATOR "ipmi-bmc-sim"
+#define IPMI_BMC_SIMULATOR(obj) OBJECT_CHECK(IPMIBmcSim, (obj), \
+ TYPE_IPMI_BMC_SIMULATOR)
+struct IPMIBmcSim {
+ IPMIBmc parent;
+
+ QEMUTimer *timer;
+
+ uint8_t bmc_global_enables;
+ uint8_t msg_flags;
+
+ bool watchdog_initialized;
+ uint8_t watchdog_use;
+ uint8_t watchdog_action;
+ uint8_t watchdog_pretimeout; /* In seconds */
+ bool watchdog_expired;
+ uint16_t watchdog_timeout; /* in 100's of milliseconds */
+
+ bool watchdog_running;
+ bool watchdog_preaction_ran;
+ int64_t watchdog_expiry;
+
+ uint8_t device_id;
+ uint8_t ipmi_version;
+ uint8_t device_rev;
+ uint8_t fwrev1;
+ uint8_t fwrev2;
+ uint8_t mfg_id[3];
+ uint8_t product_id[2];
+
+ IPMISel sel;
+ IPMISdr sdr;
+ IPMISensor sensors[MAX_SENSORS];
+
+ /* Odd netfns are for responses, so we only need the even ones. */
+ const IPMINetfn *netfns[MAX_NETFNS / 2];
+
+ QemuMutex lock;
+ /* We allow one event in the buffer */
+ uint8_t evtbuf[16];
+
+ QTAILQ_HEAD(, IPMIRcvBufEntry) rcvbufs;
+};
+
+#define IPMI_BMC_MSG_FLAG_WATCHDOG_TIMEOUT_MASK (1 << 3)
+#define IPMI_BMC_MSG_FLAG_EVT_BUF_FULL (1 << 1)
+#define IPMI_BMC_MSG_FLAG_RCV_MSG_QUEUE (1 << 0)
+#define IPMI_BMC_MSG_FLAG_WATCHDOG_TIMEOUT_MASK_SET(s) \
+ (IPMI_BMC_MSG_FLAG_WATCHDOG_TIMEOUT_MASK & (s)->msg_flags)
+#define IPMI_BMC_MSG_FLAG_EVT_BUF_FULL_SET(s) \
+ (IPMI_BMC_MSG_FLAG_EVT_BUF_FULL & (s)->msg_flags)
+#define IPMI_BMC_MSG_FLAG_RCV_MSG_QUEUE_SET(s) \
+ (IPMI_BMC_MSG_FLAG_RCV_MSG_QUEUE & (s)->msg_flags)
+
+#define IPMI_BMC_RCV_MSG_QUEUE_INT_BIT 0
+#define IPMI_BMC_EVBUF_FULL_INT_BIT 1
+#define IPMI_BMC_EVENT_MSG_BUF_BIT 2
+#define IPMI_BMC_EVENT_LOG_BIT 3
+#define IPMI_BMC_MSG_INTS_ON(s) ((s)->bmc_global_enables & \
+ (1 << IPMI_BMC_RCV_MSG_QUEUE_INT_BIT))
+#define IPMI_BMC_EVBUF_FULL_INT_ENABLED(s) ((s)->bmc_global_enables & \
+ (1 << IPMI_BMC_EVBUF_FULL_INT_BIT))
+#define IPMI_BMC_EVENT_LOG_ENABLED(s) ((s)->bmc_global_enables & \
+ (1 << IPMI_BMC_EVENT_LOG_BIT))
+#define IPMI_BMC_EVENT_MSG_BUF_ENABLED(s) ((s)->bmc_global_enables & \
+ (1 << IPMI_BMC_EVENT_MSG_BUF_BIT))
+
+#define IPMI_BMC_WATCHDOG_USE_MASK 0xc7
+#define IPMI_BMC_WATCHDOG_ACTION_MASK 0x77
+#define IPMI_BMC_WATCHDOG_GET_USE(s) ((s)->watchdog_use & 0x7)
+#define IPMI_BMC_WATCHDOG_GET_DONT_LOG(s) (((s)->watchdog_use >> 7) & 0x1)
+#define IPMI_BMC_WATCHDOG_GET_DONT_STOP(s) (((s)->watchdog_use >> 6) & 0x1)
+#define IPMI_BMC_WATCHDOG_GET_PRE_ACTION(s) (((s)->watchdog_action >> 4) & 0x7)
+#define IPMI_BMC_WATCHDOG_PRE_NONE 0
+#define IPMI_BMC_WATCHDOG_PRE_SMI 1
+#define IPMI_BMC_WATCHDOG_PRE_NMI 2
+#define IPMI_BMC_WATCHDOG_PRE_MSG_INT 3
+#define IPMI_BMC_WATCHDOG_GET_ACTION(s) ((s)->watchdog_action & 0x7)
+#define IPMI_BMC_WATCHDOG_ACTION_NONE 0
+#define IPMI_BMC_WATCHDOG_ACTION_RESET 1
+#define IPMI_BMC_WATCHDOG_ACTION_POWER_DOWN 2
+#define IPMI_BMC_WATCHDOG_ACTION_POWER_CYCLE 3
+
+
+/* Add a byte to the response. */
+#define IPMI_ADD_RSP_DATA(b) \
+ do { \
+ if (*rsp_len >= max_rsp_len) { \
+ rsp[2] = IPMI_CC_REQUEST_DATA_TRUNCATED; \
+ goto out; \
+ } \
+ rsp[(*rsp_len)++] = (b); \
+ } while (0)
+
+/* Verify that the received command is a certain length. */
+#define IPMI_CHECK_CMD_LEN(l) \
+ if (cmd_len < l) { \
+ rsp[2] = IPMI_CC_REQUEST_DATA_LENGTH_INVALID; \
+ goto out; \
+ }
+
+/* Check that the reservation in the command is valid. */
+#define IPMI_CHECK_RESERVATION(off, r) \
+ do { \
+ if ((cmd[off] | (cmd[off + 1] << 8)) != r) { \
+ rsp[2] = IPMI_CC_INVALID_RESERVATION; \
+ goto out; \
+ } \
+ } while (0)
+
+
+static void ipmi_sim_handle_timeout(IPMIBmcSim *ibs);
+
+static void ipmi_gettime(struct ipmi_time *time)
+{
+ int64_t stime;
+
+ stime = qemu_clock_get_ns(QEMU_CLOCK_HOST);
+ time->tv_sec = stime / 1000000000LL;
+ time->tv_nsec = stime % 1000000000LL;
+}
+
+static int64_t ipmi_getmonotime(void)
+{
+ return qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+}
+
+static void ipmi_timeout(void *opaque)
+{
+ IPMIBmcSim *ibs = opaque;
+
+ ipmi_sim_handle_timeout(ibs);
+}
+
+static void set_timestamp(IPMIBmcSim *ibs, uint8_t *ts)
+{
+ unsigned int val;
+ struct ipmi_time now;
+
+ ipmi_gettime(&now);
+ val = now.tv_sec + ibs->sel.time_offset;
+ ts[0] = val & 0xff;
+ ts[1] = (val >> 8) & 0xff;
+ ts[2] = (val >> 16) & 0xff;
+ ts[3] = (val >> 24) & 0xff;
+}
+
+static void sdr_inc_reservation(IPMISdr *sdr)
+{
+ sdr->reservation++;
+ if (sdr->reservation == 0) {
+ sdr->reservation = 1;
+ }
+}
+
+static int sdr_add_entry(IPMIBmcSim *ibs, const uint8_t *entry,
+ unsigned int len, uint16_t *recid)
+{
+ if ((len < 5) || (len > 255)) {
+ return 1;
+ }
+
+ if (entry[ibs->sdr.next_free + 4] != len) {
+ return 1;
+ }
+
+ if (ibs->sdr.next_free + len > MAX_SDR_SIZE) {
+ ibs->sdr.overflow = 1;
+ return 1;
+ }
+
+ memcpy(ibs->sdr.sdr + ibs->sdr.next_free, entry, len);
+ ibs->sdr.sdr[ibs->sdr.next_free] = ibs->sdr.next_rec_id & 0xff;
+ ibs->sdr.sdr[ibs->sdr.next_free+1] = (ibs->sdr.next_rec_id >> 8) & 0xff;
+ ibs->sdr.sdr[ibs->sdr.next_free+2] = 0x51; /* Conform to IPMI 1.5 spec */
+
+ if (recid) {
+ *recid = ibs->sdr.next_rec_id;
+ }
+ ibs->sdr.next_rec_id++;
+ set_timestamp(ibs, ibs->sdr.last_addition);
+ ibs->sdr.next_free += len;
+ sdr_inc_reservation(&ibs->sdr);
+ return 0;
+}
+
+static int sdr_find_entry(IPMISdr *sdr, uint16_t recid,
+ unsigned int *retpos, uint16_t *nextrec)
+{
+ unsigned int pos = *retpos;
+
+ while (pos < sdr->next_free) {
+ uint16_t trec = sdr->sdr[pos] | (sdr->sdr[pos + 1] << 8);
+ unsigned int nextpos = pos + sdr->sdr[pos + 4];
+
+ if (trec == recid) {
+ if (nextrec) {
+ if (nextpos >= sdr->next_free) {
+ *nextrec = 0xffff;
+ } else {
+ *nextrec = (sdr->sdr[nextpos] |
+ (sdr->sdr[nextpos + 1] << 8));
+ }
+ }
+ *retpos = pos;
+ return 0;
+ }
+ pos = nextpos;
+ }
+ return 1;
+}
+
+static void sel_inc_reservation(IPMISel *sel)
+{
+ sel->reservation++;
+ if (sel->reservation == 0) {
+ sel->reservation = 1;
+ }
+}
+
+/* Returns 1 if the SEL is full and can't hold the event. */
+static int sel_add_event(IPMIBmcSim *ibs, uint8_t *event)
+{
+ event[0] = 0xff;
+ event[1] = 0xff;
+ set_timestamp(ibs, event + 3);
+ if (ibs->sel.next_free == MAX_SEL_SIZE) {
+ ibs->sel.overflow = 1;
+ return 1;
+ }
+ event[0] = ibs->sel.next_free & 0xff;
+ event[1] = (ibs->sel.next_free >> 8) & 0xff;
+ memcpy(ibs->sel.last_addition, event + 3, 4);
+ memcpy(ibs->sel.sel[ibs->sel.next_free], event, 16);
+ ibs->sel.next_free++;
+ sel_inc_reservation(&ibs->sel);
+ return 0;
+}
+
+static int attn_set(IPMIBmcSim *ibs)
+{
+ return IPMI_BMC_MSG_FLAG_RCV_MSG_QUEUE_SET(ibs)
+ || IPMI_BMC_MSG_FLAG_EVT_BUF_FULL_SET(ibs)
+ || IPMI_BMC_MSG_FLAG_WATCHDOG_TIMEOUT_MASK_SET(ibs);
+}
+
+static int attn_irq_enabled(IPMIBmcSim *ibs)
+{
+ return (IPMI_BMC_MSG_INTS_ON(ibs) && IPMI_BMC_MSG_FLAG_RCV_MSG_QUEUE_SET(ibs))
+ || (IPMI_BMC_EVBUF_FULL_INT_ENABLED(ibs) &&
+ IPMI_BMC_MSG_FLAG_EVT_BUF_FULL_SET(ibs));
+}
+
+static void gen_event(IPMIBmcSim *ibs, unsigned int sens_num, uint8_t deassert,
+ uint8_t evd1, uint8_t evd2, uint8_t evd3)
+{
+ IPMIInterface *s = ibs->parent.intf;
+ IPMIInterfaceClass *k = IPMI_INTERFACE_GET_CLASS(s);
+ uint8_t evt[16];
+ IPMISensor *sens = ibs->sensors + sens_num;
+
+ if (!IPMI_BMC_EVENT_MSG_BUF_ENABLED(ibs)) {
+ return;
+ }
+ if (!IPMI_SENSOR_GET_EVENTS_ON(sens)) {
+ return;
+ }
+
+ evt[2] = 0x2; /* System event record */
+ evt[7] = ibs->parent.slave_addr;
+ evt[8] = 0;
+ evt[9] = 0x04; /* Format version */
+ evt[10] = sens->sensor_type;
+ evt[11] = sens_num;
+ evt[12] = sens->evt_reading_type_code | (!!deassert << 7);
+ evt[13] = evd1;
+ evt[14] = evd2;
+ evt[15] = evd3;
+
+ if (IPMI_BMC_EVENT_LOG_ENABLED(ibs)) {
+ sel_add_event(ibs, evt);
+ }
+
+ if (ibs->msg_flags & IPMI_BMC_MSG_FLAG_EVT_BUF_FULL) {
+ goto out;
+ }
+
+ memcpy(ibs->evtbuf, evt, 16);
+ ibs->msg_flags |= IPMI_BMC_MSG_FLAG_EVT_BUF_FULL;
+ k->set_atn(s, 1, attn_irq_enabled(ibs));
+ out:
+ return;
+}
+
+static void sensor_set_discrete_bit(IPMIBmcSim *ibs, unsigned int sensor,
+ unsigned int bit, unsigned int val,
+ uint8_t evd1, uint8_t evd2, uint8_t evd3)
+{
+ IPMISensor *sens;
+ uint16_t mask;
+
+ if (sensor >= MAX_SENSORS) {
+ return;
+ }
+ if (bit >= 16) {
+ return;
+ }
+
+ mask = (1 << bit);
+ sens = ibs->sensors + sensor;
+ if (val) {
+ sens->states |= mask & sens->states_suppt;
+ if (sens->assert_states & mask) {
+ return; /* Already asserted */
+ }
+ sens->assert_states |= mask & sens->assert_suppt;
+ if (sens->assert_enable & mask & sens->assert_states) {
+ /* Send an event on assert */
+ gen_event(ibs, sensor, 0, evd1, evd2, evd3);
+ }
+ } else {
+ sens->states &= ~(mask & sens->states_suppt);
+ if (sens->deassert_states & mask) {
+ return; /* Already deasserted */
+ }
+ sens->deassert_states |= mask & sens->deassert_suppt;
+ if (sens->deassert_enable & mask & sens->deassert_states) {
+ /* Send an event on deassert */
+ gen_event(ibs, sensor, 1, evd1, evd2, evd3);
+ }
+ }
+}
+
+static void ipmi_init_sensors_from_sdrs(IPMIBmcSim *s)
+{
+ unsigned int i, pos;
+ IPMISensor *sens;
+
+ for (i = 0; i < MAX_SENSORS; i++) {
+ memset(s->sensors + i, 0, sizeof(*sens));
+ }
+
+ pos = 0;
+ for (i = 0; !sdr_find_entry(&s->sdr, i, &pos, NULL); i++) {
+ uint8_t *sdr = s->sdr.sdr + pos;
+ unsigned int len = sdr[4];
+
+ if (len < 20) {
+ continue;
+ }
+ if ((sdr[3] < 1) || (sdr[3] > 2)) {
+ continue; /* Not a sensor SDR we set from */
+ }
+
+ if (sdr[7] > MAX_SENSORS) {
+ continue;
+ }
+ sens = s->sensors + sdr[7];
+
+ IPMI_SENSOR_SET_PRESENT(sens, 1);
+ IPMI_SENSOR_SET_SCAN_ON(sens, (sdr[10] >> 6) & 1);
+ IPMI_SENSOR_SET_EVENTS_ON(sens, (sdr[10] >> 5) & 1);
+ sens->assert_suppt = sdr[14] | (sdr[15] << 8);
+ sens->deassert_suppt = sdr[16] | (sdr[17] << 8);
+ sens->states_suppt = sdr[18] | (sdr[19] << 8);
+ sens->sensor_type = sdr[12];
+ sens->evt_reading_type_code = sdr[13] & 0x7f;
+
+ /* Enable all the events that are supported. */
+ sens->assert_enable = sens->assert_suppt;
+ sens->deassert_enable = sens->deassert_suppt;
+ }
+}
+
+static int ipmi_register_netfn(IPMIBmcSim *s, unsigned int netfn,
+ const IPMINetfn *netfnd)
+{
+ if ((netfn & 1) || (netfn > MAX_NETFNS) || (s->netfns[netfn / 2])) {
+ return -1;
+ }
+ s->netfns[netfn / 2] = netfnd;
+ return 0;
+}
+
+static void next_timeout(IPMIBmcSim *ibs)
+{
+ int64_t next;
+ if (ibs->watchdog_running) {
+ next = ibs->watchdog_expiry;
+ } else {
+ /* Wait a minute */
+ next = ipmi_getmonotime() + 60 * 1000000000LL;
+ }
+ timer_mod_ns(ibs->timer, next);
+}
+
+static void ipmi_sim_handle_command(IPMIBmc *b,
+ uint8_t *cmd, unsigned int cmd_len,
+ unsigned int max_cmd_len,
+ uint8_t msg_id)
+{
+ IPMIBmcSim *ibs = IPMI_BMC_SIMULATOR(b);
+ IPMIInterface *s = ibs->parent.intf;
+ IPMIInterfaceClass *k = IPMI_INTERFACE_GET_CLASS(s);
+ unsigned int netfn;
+ uint8_t rsp[MAX_IPMI_MSG_SIZE];
+ unsigned int rsp_len_holder = 0;
+ unsigned int *rsp_len = &rsp_len_holder;
+ unsigned int max_rsp_len = sizeof(rsp);
+
+ /* Set up the response, set the low bit of NETFN. */
+ /* Note that max_rsp_len must be at least 3 */
+ IPMI_ADD_RSP_DATA(cmd[0] | 0x04);
+ IPMI_ADD_RSP_DATA(cmd[1]);
+ IPMI_ADD_RSP_DATA(0); /* Assume success */
+
+ /* If it's too short or it was truncated, return an error. */
+ if (cmd_len < 2) {
+ rsp[2] = IPMI_CC_REQUEST_DATA_LENGTH_INVALID;
+ goto out;
+ }
+ if (cmd_len > max_cmd_len) {
+ rsp[2] = IPMI_CC_REQUEST_DATA_TRUNCATED;
+ goto out;
+ }
+
+ if ((cmd[0] & 0x03) != 0) {
+ /* Only have stuff on LUN 0 */
+ rsp[2] = IPMI_CC_COMMAND_INVALID_FOR_LUN;
+ goto out;
+ }
+
+ netfn = cmd[0] >> 2;
+
+ /* Odd netfns are not valid, make sure the command is registered */
+ if ((netfn & 1) || !ibs->netfns[netfn / 2] ||
+ (cmd[1] >= ibs->netfns[netfn / 2]->cmd_nums) ||
+ (!ibs->netfns[netfn / 2]->cmd_handlers[cmd[1]])) {
+ rsp[2] = IPMI_CC_INVALID_CMD;
+ goto out;
+ }
+
+ ibs->netfns[netfn / 2]->cmd_handlers[cmd[1]](ibs, cmd, cmd_len, rsp, rsp_len,
+ max_rsp_len);
+
+ out:
+ k->handle_rsp(s, msg_id, rsp, *rsp_len);
+
+ next_timeout(ibs);
+}
+
+static void ipmi_sim_handle_timeout(IPMIBmcSim *ibs)
+{
+ IPMIInterface *s = ibs->parent.intf;
+ IPMIInterfaceClass *k = IPMI_INTERFACE_GET_CLASS(s);
+
+ if (!ibs->watchdog_running) {
+ goto out;
+ }
+
+ if (!ibs->watchdog_preaction_ran) {
+ switch (IPMI_BMC_WATCHDOG_GET_PRE_ACTION(ibs)) {
+ case IPMI_BMC_WATCHDOG_PRE_NMI:
+ ibs->msg_flags |= IPMI_BMC_MSG_FLAG_WATCHDOG_TIMEOUT_MASK;
+ k->do_hw_op(s, IPMI_SEND_NMI, 0);
+ sensor_set_discrete_bit(ibs, IPMI_WATCHDOG_SENSOR, 8, 1,
+ 0xc8, (2 << 4) | 0xf, 0xff);
+ break;
+
+ case IPMI_BMC_WATCHDOG_PRE_MSG_INT:
+ ibs->msg_flags |= IPMI_BMC_MSG_FLAG_WATCHDOG_TIMEOUT_MASK;
+ k->set_atn(s, 1, attn_irq_enabled(ibs));
+ sensor_set_discrete_bit(ibs, IPMI_WATCHDOG_SENSOR, 8, 1,
+ 0xc8, (3 << 4) | 0xf, 0xff);
+ break;
+
+ default:
+ goto do_full_expiry;
+ }
+
+ ibs->watchdog_preaction_ran = 1;
+ /* Issued the pretimeout, do the rest of the timeout now. */
+ ibs->watchdog_expiry = ipmi_getmonotime();
+ ibs->watchdog_expiry += ibs->watchdog_pretimeout * 1000000000LL;
+ goto out;
+ }
+
+ do_full_expiry:
+ ibs->watchdog_running = 0; /* Stop the watchdog on a timeout */
+ ibs->watchdog_expired |= (1 << IPMI_BMC_WATCHDOG_GET_USE(ibs));
+ switch (IPMI_BMC_WATCHDOG_GET_ACTION(ibs)) {
+ case IPMI_BMC_WATCHDOG_ACTION_NONE:
+ sensor_set_discrete_bit(ibs, IPMI_WATCHDOG_SENSOR, 0, 1,
+ 0xc0, ibs->watchdog_use & 0xf, 0xff);
+ break;
+
+ case IPMI_BMC_WATCHDOG_ACTION_RESET:
+ sensor_set_discrete_bit(ibs, IPMI_WATCHDOG_SENSOR, 1, 1,
+ 0xc1, ibs->watchdog_use & 0xf, 0xff);
+ k->do_hw_op(s, IPMI_RESET_CHASSIS, 0);
+ break;
+
+ case IPMI_BMC_WATCHDOG_ACTION_POWER_DOWN:
+ sensor_set_discrete_bit(ibs, IPMI_WATCHDOG_SENSOR, 2, 1,
+ 0xc2, ibs->watchdog_use & 0xf, 0xff);
+ k->do_hw_op(s, IPMI_POWEROFF_CHASSIS, 0);
+ break;
+
+ case IPMI_BMC_WATCHDOG_ACTION_POWER_CYCLE:
+ sensor_set_discrete_bit(ibs, IPMI_WATCHDOG_SENSOR, 2, 1,
+ 0xc3, ibs->watchdog_use & 0xf, 0xff);
+ k->do_hw_op(s, IPMI_POWERCYCLE_CHASSIS, 0);
+ break;
+ }
+
+ out:
+ next_timeout(ibs);
+}
+
+static void chassis_capabilities(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ IPMI_ADD_RSP_DATA(0);
+ IPMI_ADD_RSP_DATA(ibs->parent.slave_addr);
+ IPMI_ADD_RSP_DATA(ibs->parent.slave_addr);
+ IPMI_ADD_RSP_DATA(ibs->parent.slave_addr);
+ IPMI_ADD_RSP_DATA(ibs->parent.slave_addr);
+ out:
+ return;
+}
+
+static void chassis_status(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ IPMI_ADD_RSP_DATA(0x61); /* Unknown power restore, power is on */
+ IPMI_ADD_RSP_DATA(0);
+ IPMI_ADD_RSP_DATA(0);
+ IPMI_ADD_RSP_DATA(0);
+ out:
+ return;
+}
+
+static void chassis_control(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ IPMIInterface *s = ibs->parent.intf;
+ IPMIInterfaceClass *k = IPMI_INTERFACE_GET_CLASS(s);
+
+ IPMI_CHECK_CMD_LEN(3);
+ switch (cmd[2] & 0xf) {
+ case 0: /* power down */
+ rsp[2] = k->do_hw_op(s, IPMI_POWEROFF_CHASSIS, 0);
+ break;
+ case 1: /* power up */
+ rsp[2] = k->do_hw_op(s, IPMI_POWERON_CHASSIS, 0);
+ break;
+ case 2: /* power cycle */
+ rsp[2] = k->do_hw_op(s, IPMI_POWERCYCLE_CHASSIS, 0);
+ break;
+ case 3: /* hard reset */
+ rsp[2] = k->do_hw_op(s, IPMI_RESET_CHASSIS, 0);
+ break;
+ case 4: /* pulse diagnostic interrupt */
+ rsp[2] = k->do_hw_op(s, IPMI_PULSE_DIAG_IRQ, 0);
+ break;
+ case 5: /* soft shutdown via ACPI by overtemp emulation */
+ rsp[2] = k->do_hw_op(s,
+ IPMI_SHUTDOWN_VIA_ACPI_OVERTEMP, 0);
+ break;
+ default:
+ rsp[2] = IPMI_CC_INVALID_DATA_FIELD;
+ goto out;
+ }
+ out:
+ return;
+}
+
+static void get_device_id(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ IPMI_ADD_RSP_DATA(ibs->device_id);
+ IPMI_ADD_RSP_DATA(ibs->device_rev & 0xf);
+ IPMI_ADD_RSP_DATA(ibs->fwrev1 & 0x7f);
+ IPMI_ADD_RSP_DATA(ibs->fwrev2);
+ IPMI_ADD_RSP_DATA(ibs->ipmi_version);
+ IPMI_ADD_RSP_DATA(0x07); /* sensor, SDR, and SEL. */
+ IPMI_ADD_RSP_DATA(ibs->mfg_id[0]);
+ IPMI_ADD_RSP_DATA(ibs->mfg_id[1]);
+ IPMI_ADD_RSP_DATA(ibs->mfg_id[2]);
+ IPMI_ADD_RSP_DATA(ibs->product_id[0]);
+ IPMI_ADD_RSP_DATA(ibs->product_id[1]);
+ out:
+ return;
+}
+
+static void set_global_enables(IPMIBmcSim *ibs, uint8_t val)
+{
+ IPMIInterface *s = ibs->parent.intf;
+ IPMIInterfaceClass *k = IPMI_INTERFACE_GET_CLASS(s);
+ bool irqs_on;
+
+ ibs->bmc_global_enables = val;
+
+ irqs_on = val & (IPMI_BMC_EVBUF_FULL_INT_BIT |
+ IPMI_BMC_RCV_MSG_QUEUE_INT_BIT);
+
+ k->set_irq_enable(s, irqs_on);
+}
+
+static void cold_reset(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ IPMIInterface *s = ibs->parent.intf;
+ IPMIInterfaceClass *k = IPMI_INTERFACE_GET_CLASS(s);
+
+ /* Disable all interrupts */
+ set_global_enables(ibs, 1 << IPMI_BMC_EVENT_LOG_BIT);
+
+ if (k->reset) {
+ k->reset(s, true);
+ }
+}
+
+static void warm_reset(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ IPMIInterface *s = ibs->parent.intf;
+ IPMIInterfaceClass *k = IPMI_INTERFACE_GET_CLASS(s);
+
+ if (k->reset) {
+ k->reset(s, false);
+ }
+}
+
+static void set_bmc_global_enables(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ IPMI_CHECK_CMD_LEN(3);
+ set_global_enables(ibs, cmd[2]);
+ out:
+ return;
+}
+
+static void get_bmc_global_enables(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ IPMI_ADD_RSP_DATA(ibs->bmc_global_enables);
+ out:
+ return;
+}
+
+static void clr_msg_flags(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ IPMIInterface *s = ibs->parent.intf;
+ IPMIInterfaceClass *k = IPMI_INTERFACE_GET_CLASS(s);
+
+ IPMI_CHECK_CMD_LEN(3);
+ ibs->msg_flags &= ~cmd[2];
+ k->set_atn(s, attn_set(ibs), attn_irq_enabled(ibs));
+ out:
+ return;
+}
+
+static void get_msg_flags(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ IPMI_ADD_RSP_DATA(ibs->msg_flags);
+ out:
+ return;
+}
+
+static void read_evt_msg_buf(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ IPMIInterface *s = ibs->parent.intf;
+ IPMIInterfaceClass *k = IPMI_INTERFACE_GET_CLASS(s);
+ unsigned int i;
+
+ if (!(ibs->msg_flags & IPMI_BMC_MSG_FLAG_EVT_BUF_FULL)) {
+ rsp[2] = 0x80;
+ goto out;
+ }
+ for (i = 0; i < 16; i++) {
+ IPMI_ADD_RSP_DATA(ibs->evtbuf[i]);
+ }
+ ibs->msg_flags &= ~IPMI_BMC_MSG_FLAG_EVT_BUF_FULL;
+ k->set_atn(s, attn_set(ibs), attn_irq_enabled(ibs));
+ out:
+ return;
+}
+
+static void get_msg(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ IPMIRcvBufEntry *msg;
+
+ qemu_mutex_lock(&ibs->lock);
+ if (QTAILQ_EMPTY(&ibs->rcvbufs)) {
+ rsp[2] = 0x80; /* Queue empty */
+ goto out;
+ }
+ rsp[3] = 0; /* Channel 0 */
+ *rsp_len += 1;
+ msg = QTAILQ_FIRST(&ibs->rcvbufs);
+ memcpy(rsp + 4, msg->buf, msg->len);
+ *rsp_len += msg->len;
+ QTAILQ_REMOVE(&ibs->rcvbufs, msg, entry);
+ g_free(msg);
+
+ if (QTAILQ_EMPTY(&ibs->rcvbufs)) {
+ IPMIInterface *s = ibs->parent.intf;
+ IPMIInterfaceClass *k = IPMI_INTERFACE_GET_CLASS(s);
+
+ ibs->msg_flags &= ~IPMI_BMC_MSG_FLAG_RCV_MSG_QUEUE;
+ k->set_atn(s, attn_set(ibs), attn_irq_enabled(ibs));
+ }
+
+ out:
+ qemu_mutex_unlock(&ibs->lock);
+ return;
+}
+
+static unsigned char
+ipmb_checksum(unsigned char *data, int size, unsigned char csum)
+{
+ for (; size > 0; size--, data++) {
+ csum += *data;
+ }
+
+ return -csum;
+}
+
+static void send_msg(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ IPMIInterface *s = ibs->parent.intf;
+ IPMIInterfaceClass *k = IPMI_INTERFACE_GET_CLASS(s);
+ IPMIRcvBufEntry *msg;
+ uint8_t *buf;
+ uint8_t netfn, rqLun, rsLun, rqSeq;
+
+ IPMI_CHECK_CMD_LEN(3);
+
+ if (cmd[2] != 0) {
+ /* We only handle channel 0 with no options */
+ rsp[2] = IPMI_CC_INVALID_DATA_FIELD;
+ goto out;
+ }
+
+ IPMI_CHECK_CMD_LEN(10);
+ if (cmd[3] != 0x40) {
+ /* We only emulate a MC at address 0x40. */
+ rsp[2] = 0x83; /* NAK on write */
+ goto out;
+ }
+
+ cmd += 3; /* Skip the header. */
+ cmd_len -= 3;
+
+ /*
+ * At this point we "send" the message successfully. Any error will
+ * be returned in the response.
+ */
+ if (ipmb_checksum(cmd, cmd_len, 0) != 0 ||
+ cmd[3] != 0x20) { /* Improper response address */
+ goto out; /* No response */
+ }
+
+ netfn = cmd[1] >> 2;
+ rqLun = cmd[4] & 0x3;
+ rsLun = cmd[1] & 0x3;
+ rqSeq = cmd[4] >> 2;
+
+ if (rqLun != 2) {
+ /* We only support LUN 2 coming back to us. */
+ goto out;
+ }
+
+ msg = g_malloc(sizeof(*msg));
+ msg->buf[0] = ((netfn | 1) << 2) | rqLun; /* NetFN, and make a response */
+ msg->buf[1] = ipmb_checksum(msg->buf, 1, 0);
+ msg->buf[2] = cmd[0]; /* rsSA */
+ msg->buf[3] = (rqSeq << 2) | rsLun;
+ msg->buf[4] = cmd[5]; /* Cmd */
+ msg->buf[5] = 0; /* Completion Code */
+ msg->len = 6;
+
+ if ((cmd[1] >> 2) != IPMI_NETFN_APP || cmd[5] != IPMI_CMD_GET_DEVICE_ID) {
+ /* Not a command we handle. */
+ msg->buf[5] = IPMI_CC_INVALID_CMD;
+ goto end_msg;
+ }
+
+ buf = msg->buf + msg->len; /* After the CC */
+ buf[0] = 0;
+ buf[1] = 0;
+ buf[2] = 0;
+ buf[3] = 0;
+ buf[4] = 0x51;
+ buf[5] = 0;
+ buf[6] = 0;
+ buf[7] = 0;
+ buf[8] = 0;
+ buf[9] = 0;
+ buf[10] = 0;
+ msg->len += 11;
+
+ end_msg:
+ msg->buf[msg->len] = ipmb_checksum(msg->buf, msg->len, 0);
+ msg->len++;
+ qemu_mutex_lock(&ibs->lock);
+ QTAILQ_INSERT_TAIL(&ibs->rcvbufs, msg, entry);
+ ibs->msg_flags |= IPMI_BMC_MSG_FLAG_RCV_MSG_QUEUE;
+ k->set_atn(s, 1, attn_irq_enabled(ibs));
+ qemu_mutex_unlock(&ibs->lock);
+
+ out:
+ return;
+}
+
+static void do_watchdog_reset(IPMIBmcSim *ibs)
+{
+ if (IPMI_BMC_WATCHDOG_GET_ACTION(ibs) ==
+ IPMI_BMC_WATCHDOG_ACTION_NONE) {
+ ibs->watchdog_running = 0;
+ return;
+ }
+ ibs->watchdog_preaction_ran = 0;
+
+
+ /* Timeout is in tenths of a second, offset is in seconds */
+ ibs->watchdog_expiry = ipmi_getmonotime();
+ ibs->watchdog_expiry += ibs->watchdog_timeout * 100000000LL;
+ if (IPMI_BMC_WATCHDOG_GET_PRE_ACTION(ibs) != IPMI_BMC_WATCHDOG_PRE_NONE) {
+ ibs->watchdog_expiry -= ibs->watchdog_pretimeout * 1000000000LL;
+ }
+ ibs->watchdog_running = 1;
+}
+
+static void reset_watchdog_timer(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ if (!ibs->watchdog_initialized) {
+ rsp[2] = 0x80;
+ goto out;
+ }
+ do_watchdog_reset(ibs);
+ out:
+ return;
+}
+
+static void set_watchdog_timer(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ IPMIInterface *s = ibs->parent.intf;
+ IPMIInterfaceClass *k = IPMI_INTERFACE_GET_CLASS(s);
+ unsigned int val;
+
+ IPMI_CHECK_CMD_LEN(8);
+ val = cmd[2] & 0x7; /* Validate use */
+ if (val == 0 || val > 5) {
+ rsp[2] = IPMI_CC_INVALID_DATA_FIELD;
+ goto out;
+ }
+ val = cmd[3] & 0x7; /* Validate action */
+ switch (val) {
+ case IPMI_BMC_WATCHDOG_ACTION_NONE:
+ break;
+
+ case IPMI_BMC_WATCHDOG_ACTION_RESET:
+ rsp[2] = k->do_hw_op(s, IPMI_RESET_CHASSIS, 1);
+ break;
+
+ case IPMI_BMC_WATCHDOG_ACTION_POWER_DOWN:
+ rsp[2] = k->do_hw_op(s, IPMI_POWEROFF_CHASSIS, 1);
+ break;
+
+ case IPMI_BMC_WATCHDOG_ACTION_POWER_CYCLE:
+ rsp[2] = k->do_hw_op(s, IPMI_POWERCYCLE_CHASSIS, 1);
+ break;
+
+ default:
+ rsp[2] = IPMI_CC_INVALID_DATA_FIELD;
+ }
+ if (rsp[2]) {
+ rsp[2] = IPMI_CC_INVALID_DATA_FIELD;
+ goto out;
+ }
+
+ val = (cmd[3] >> 4) & 0x7; /* Validate preaction */
+ switch (val) {
+ case IPMI_BMC_WATCHDOG_PRE_MSG_INT:
+ case IPMI_BMC_WATCHDOG_PRE_NONE:
+ break;
+
+ case IPMI_BMC_WATCHDOG_PRE_NMI:
+ if (!k->do_hw_op(s, IPMI_SEND_NMI, 1)) {
+ /* NMI not supported. */
+ rsp[2] = IPMI_CC_INVALID_DATA_FIELD;
+ goto out;
+ }
+ default:
+ /* We don't support PRE_SMI */
+ rsp[2] = IPMI_CC_INVALID_DATA_FIELD;
+ goto out;
+ }
+
+ ibs->watchdog_initialized = 1;
+ ibs->watchdog_use = cmd[2] & IPMI_BMC_WATCHDOG_USE_MASK;
+ ibs->watchdog_action = cmd[3] & IPMI_BMC_WATCHDOG_ACTION_MASK;
+ ibs->watchdog_pretimeout = cmd[4];
+ ibs->watchdog_expired &= ~cmd[5];
+ ibs->watchdog_timeout = cmd[6] | (((uint16_t) cmd[7]) << 8);
+ if (ibs->watchdog_running & IPMI_BMC_WATCHDOG_GET_DONT_STOP(ibs)) {
+ do_watchdog_reset(ibs);
+ } else {
+ ibs->watchdog_running = 0;
+ }
+ out:
+ return;
+}
+
+static void get_watchdog_timer(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ IPMI_ADD_RSP_DATA(ibs->watchdog_use);
+ IPMI_ADD_RSP_DATA(ibs->watchdog_action);
+ IPMI_ADD_RSP_DATA(ibs->watchdog_pretimeout);
+ IPMI_ADD_RSP_DATA(ibs->watchdog_expired);
+ if (ibs->watchdog_running) {
+ long timeout;
+ timeout = ((ibs->watchdog_expiry - ipmi_getmonotime() + 50000000)
+ / 100000000);
+ IPMI_ADD_RSP_DATA(timeout & 0xff);
+ IPMI_ADD_RSP_DATA((timeout >> 8) & 0xff);
+ } else {
+ IPMI_ADD_RSP_DATA(0);
+ IPMI_ADD_RSP_DATA(0);
+ }
+ out:
+ return;
+}
+
+static void get_sdr_rep_info(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ unsigned int i;
+
+ IPMI_ADD_RSP_DATA(0x51); /* Conform to IPMI 1.5 spec */
+ IPMI_ADD_RSP_DATA(ibs->sdr.next_rec_id & 0xff);
+ IPMI_ADD_RSP_DATA((ibs->sdr.next_rec_id >> 8) & 0xff);
+ IPMI_ADD_RSP_DATA((MAX_SDR_SIZE - ibs->sdr.next_free) & 0xff);
+ IPMI_ADD_RSP_DATA(((MAX_SDR_SIZE - ibs->sdr.next_free) >> 8) & 0xff);
+ for (i = 0; i < 4; i++) {
+ IPMI_ADD_RSP_DATA(ibs->sdr.last_addition[i]);
+ }
+ for (i = 0; i < 4; i++) {
+ IPMI_ADD_RSP_DATA(ibs->sdr.last_clear[i]);
+ }
+ /* Only modal support, reserve supported */
+ IPMI_ADD_RSP_DATA((ibs->sdr.overflow << 7) | 0x22);
+ out:
+ return;
+}
+
+static void reserve_sdr_rep(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ IPMI_ADD_RSP_DATA(ibs->sdr.reservation & 0xff);
+ IPMI_ADD_RSP_DATA((ibs->sdr.reservation >> 8) & 0xff);
+ out:
+ return;
+}
+
+static void get_sdr(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ unsigned int pos;
+ uint16_t nextrec;
+
+ IPMI_CHECK_CMD_LEN(8);
+ if (cmd[6]) {
+ IPMI_CHECK_RESERVATION(2, ibs->sdr.reservation);
+ }
+ pos = 0;
+ if (sdr_find_entry(&ibs->sdr, cmd[4] | (cmd[5] << 8),
+ &pos, &nextrec)) {
+ rsp[2] = IPMI_CC_REQ_ENTRY_NOT_PRESENT;
+ goto out;
+ }
+ if (cmd[6] > (ibs->sdr.sdr[pos + 4])) {
+ rsp[2] = IPMI_CC_PARM_OUT_OF_RANGE;
+ goto out;
+ }
+
+ IPMI_ADD_RSP_DATA(nextrec & 0xff);
+ IPMI_ADD_RSP_DATA((nextrec >> 8) & 0xff);
+
+ if (cmd[7] == 0xff) {
+ cmd[7] = ibs->sdr.sdr[pos + 4] - cmd[6];
+ }
+
+ if ((cmd[7] + *rsp_len) > max_rsp_len) {
+ rsp[2] = IPMI_CC_CANNOT_RETURN_REQ_NUM_BYTES;
+ goto out;
+ }
+ memcpy(rsp + *rsp_len, ibs->sdr.sdr + pos + cmd[6], cmd[7]);
+ *rsp_len += cmd[7];
+ out:
+ return;
+}
+
+static void add_sdr(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ uint16_t recid;
+
+ if (sdr_add_entry(ibs, cmd + 2, cmd_len - 2, &recid)) {
+ rsp[2] = IPMI_CC_INVALID_DATA_FIELD;
+ goto out;
+ }
+ IPMI_ADD_RSP_DATA(recid & 0xff);
+ IPMI_ADD_RSP_DATA((recid >> 8) & 0xff);
+ out:
+ return;
+}
+
+static void clear_sdr_rep(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ IPMI_CHECK_CMD_LEN(8);
+ IPMI_CHECK_RESERVATION(2, ibs->sdr.reservation);
+ if (cmd[4] != 'C' || cmd[5] != 'L' || cmd[6] != 'R') {
+ rsp[2] = IPMI_CC_INVALID_DATA_FIELD;
+ goto out;
+ }
+ if (cmd[7] == 0xaa) {
+ ibs->sdr.next_free = 0;
+ ibs->sdr.overflow = 0;
+ set_timestamp(ibs, ibs->sdr.last_clear);
+ IPMI_ADD_RSP_DATA(1); /* Erasure complete */
+ sdr_inc_reservation(&ibs->sdr);
+ } else if (cmd[7] == 0) {
+ IPMI_ADD_RSP_DATA(1); /* Erasure complete */
+ } else {
+ rsp[2] = IPMI_CC_INVALID_DATA_FIELD;
+ goto out;
+ }
+ out:
+ return;
+}
+
+static void get_sel_info(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ unsigned int i, val;
+
+ IPMI_ADD_RSP_DATA(0x51); /* Conform to IPMI 1.5 */
+ IPMI_ADD_RSP_DATA(ibs->sel.next_free & 0xff);
+ IPMI_ADD_RSP_DATA((ibs->sel.next_free >> 8) & 0xff);
+ val = (MAX_SEL_SIZE - ibs->sel.next_free) * 16;
+ IPMI_ADD_RSP_DATA(val & 0xff);
+ IPMI_ADD_RSP_DATA((val >> 8) & 0xff);
+ for (i = 0; i < 4; i++) {
+ IPMI_ADD_RSP_DATA(ibs->sel.last_addition[i]);
+ }
+ for (i = 0; i < 4; i++) {
+ IPMI_ADD_RSP_DATA(ibs->sel.last_clear[i]);
+ }
+ /* Only support Reserve SEL */
+ IPMI_ADD_RSP_DATA((ibs->sel.overflow << 7) | 0x02);
+ out:
+ return;
+}
+
+static void reserve_sel(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ IPMI_ADD_RSP_DATA(ibs->sel.reservation & 0xff);
+ IPMI_ADD_RSP_DATA((ibs->sel.reservation >> 8) & 0xff);
+ out:
+ return;
+}
+
+static void get_sel_entry(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ unsigned int val;
+
+ IPMI_CHECK_CMD_LEN(8);
+ if (cmd[6]) {
+ IPMI_CHECK_RESERVATION(2, ibs->sel.reservation);
+ }
+ if (ibs->sel.next_free == 0) {
+ rsp[2] = IPMI_CC_REQ_ENTRY_NOT_PRESENT;
+ goto out;
+ }
+ if (cmd[6] > 15) {
+ rsp[2] = IPMI_CC_INVALID_DATA_FIELD;
+ goto out;
+ }
+ if (cmd[7] == 0xff) {
+ cmd[7] = 16;
+ } else if ((cmd[7] + cmd[6]) > 16) {
+ rsp[2] = IPMI_CC_INVALID_DATA_FIELD;
+ goto out;
+ } else {
+ cmd[7] += cmd[6];
+ }
+
+ val = cmd[4] | (cmd[5] << 8);
+ if (val == 0xffff) {
+ val = ibs->sel.next_free - 1;
+ } else if (val >= ibs->sel.next_free) {
+ rsp[2] = IPMI_CC_REQ_ENTRY_NOT_PRESENT;
+ goto out;
+ }
+ if ((val + 1) == ibs->sel.next_free) {
+ IPMI_ADD_RSP_DATA(0xff);
+ IPMI_ADD_RSP_DATA(0xff);
+ } else {
+ IPMI_ADD_RSP_DATA((val + 1) & 0xff);
+ IPMI_ADD_RSP_DATA(((val + 1) >> 8) & 0xff);
+ }
+ for (; cmd[6] < cmd[7]; cmd[6]++) {
+ IPMI_ADD_RSP_DATA(ibs->sel.sel[val][cmd[6]]);
+ }
+ out:
+ return;
+}
+
+static void add_sel_entry(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ IPMI_CHECK_CMD_LEN(18);
+ if (sel_add_event(ibs, cmd + 2)) {
+ rsp[2] = IPMI_CC_OUT_OF_SPACE;
+ goto out;
+ }
+ /* sel_add_event fills in the record number. */
+ IPMI_ADD_RSP_DATA(cmd[2]);
+ IPMI_ADD_RSP_DATA(cmd[3]);
+ out:
+ return;
+}
+
+static void clear_sel(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ IPMI_CHECK_CMD_LEN(8);
+ IPMI_CHECK_RESERVATION(2, ibs->sel.reservation);
+ if (cmd[4] != 'C' || cmd[5] != 'L' || cmd[6] != 'R') {
+ rsp[2] = IPMI_CC_INVALID_DATA_FIELD;
+ goto out;
+ }
+ if (cmd[7] == 0xaa) {
+ ibs->sel.next_free = 0;
+ ibs->sel.overflow = 0;
+ set_timestamp(ibs, ibs->sdr.last_clear);
+ IPMI_ADD_RSP_DATA(1); /* Erasure complete */
+ sel_inc_reservation(&ibs->sel);
+ } else if (cmd[7] == 0) {
+ IPMI_ADD_RSP_DATA(1); /* Erasure complete */
+ } else {
+ rsp[2] = IPMI_CC_INVALID_DATA_FIELD;
+ goto out;
+ }
+ out:
+ return;
+}
+
+static void get_sel_time(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ uint32_t val;
+ struct ipmi_time now;
+
+ ipmi_gettime(&now);
+ val = now.tv_sec + ibs->sel.time_offset;
+ IPMI_ADD_RSP_DATA(val & 0xff);
+ IPMI_ADD_RSP_DATA((val >> 8) & 0xff);
+ IPMI_ADD_RSP_DATA((val >> 16) & 0xff);
+ IPMI_ADD_RSP_DATA((val >> 24) & 0xff);
+ out:
+ return;
+}
+
+static void set_sel_time(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ uint32_t val;
+ struct ipmi_time now;
+
+ IPMI_CHECK_CMD_LEN(6);
+ val = cmd[2] | (cmd[3] << 8) | (cmd[4] << 16) | (cmd[5] << 24);
+ ipmi_gettime(&now);
+ ibs->sel.time_offset = now.tv_sec - ((long) val);
+ out:
+ return;
+}
+
+static void set_sensor_evt_enable(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ IPMISensor *sens;
+
+ IPMI_CHECK_CMD_LEN(4);
+ if ((cmd[2] > MAX_SENSORS) ||
+ !IPMI_SENSOR_GET_PRESENT(ibs->sensors + cmd[2])) {
+ rsp[2] = IPMI_CC_REQ_ENTRY_NOT_PRESENT;
+ goto out;
+ }
+ sens = ibs->sensors + cmd[2];
+ switch ((cmd[3] >> 4) & 0x3) {
+ case 0: /* Do not change */
+ break;
+ case 1: /* Enable bits */
+ if (cmd_len > 4) {
+ sens->assert_enable |= cmd[4];
+ }
+ if (cmd_len > 5) {
+ sens->assert_enable |= cmd[5] << 8;
+ }
+ if (cmd_len > 6) {
+ sens->deassert_enable |= cmd[6];
+ }
+ if (cmd_len > 7) {
+ sens->deassert_enable |= cmd[7] << 8;
+ }
+ break;
+ case 2: /* Disable bits */
+ if (cmd_len > 4) {
+ sens->assert_enable &= ~cmd[4];
+ }
+ if (cmd_len > 5) {
+ sens->assert_enable &= ~(cmd[5] << 8);
+ }
+ if (cmd_len > 6) {
+ sens->deassert_enable &= ~cmd[6];
+ }
+ if (cmd_len > 7) {
+ sens->deassert_enable &= ~(cmd[7] << 8);
+ }
+ break;
+ case 3:
+ rsp[2] = IPMI_CC_INVALID_DATA_FIELD;
+ goto out;
+ }
+ IPMI_SENSOR_SET_RET_STATUS(sens, cmd[3]);
+ out:
+ return;
+}
+
+static void get_sensor_evt_enable(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ IPMISensor *sens;
+
+ IPMI_CHECK_CMD_LEN(3);
+ if ((cmd[2] > MAX_SENSORS) ||
+ !IPMI_SENSOR_GET_PRESENT(ibs->sensors + cmd[2])) {
+ rsp[2] = IPMI_CC_REQ_ENTRY_NOT_PRESENT;
+ goto out;
+ }
+ sens = ibs->sensors + cmd[2];
+ IPMI_ADD_RSP_DATA(IPMI_SENSOR_GET_RET_STATUS(sens));
+ IPMI_ADD_RSP_DATA(sens->assert_enable & 0xff);
+ IPMI_ADD_RSP_DATA((sens->assert_enable >> 8) & 0xff);
+ IPMI_ADD_RSP_DATA(sens->deassert_enable & 0xff);
+ IPMI_ADD_RSP_DATA((sens->deassert_enable >> 8) & 0xff);
+ out:
+ return;
+}
+
+static void rearm_sensor_evts(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ IPMISensor *sens;
+
+ IPMI_CHECK_CMD_LEN(4);
+ if ((cmd[2] > MAX_SENSORS) ||
+ !IPMI_SENSOR_GET_PRESENT(ibs->sensors + cmd[2])) {
+ rsp[2] = IPMI_CC_REQ_ENTRY_NOT_PRESENT;
+ goto out;
+ }
+ sens = ibs->sensors + cmd[2];
+
+ if ((cmd[3] & 0x80) == 0) {
+ /* Just clear everything */
+ sens->states = 0;
+ goto out;
+ }
+ out:
+ return;
+}
+
+static void get_sensor_evt_status(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ IPMISensor *sens;
+
+ IPMI_CHECK_CMD_LEN(3);
+ if ((cmd[2] > MAX_SENSORS) ||
+ !IPMI_SENSOR_GET_PRESENT(ibs->sensors + cmd[2])) {
+ rsp[2] = IPMI_CC_REQ_ENTRY_NOT_PRESENT;
+ goto out;
+ }
+ sens = ibs->sensors + cmd[2];
+ IPMI_ADD_RSP_DATA(sens->reading);
+ IPMI_ADD_RSP_DATA(IPMI_SENSOR_GET_RET_STATUS(sens));
+ IPMI_ADD_RSP_DATA(sens->assert_states & 0xff);
+ IPMI_ADD_RSP_DATA((sens->assert_states >> 8) & 0xff);
+ IPMI_ADD_RSP_DATA(sens->deassert_states & 0xff);
+ IPMI_ADD_RSP_DATA((sens->deassert_states >> 8) & 0xff);
+ out:
+ return;
+}
+
+static void get_sensor_reading(IPMIBmcSim *ibs,
+ uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len,
+ unsigned int max_rsp_len)
+{
+ IPMISensor *sens;
+
+ IPMI_CHECK_CMD_LEN(3);
+ if ((cmd[2] > MAX_SENSORS) ||
+ !IPMI_SENSOR_GET_PRESENT(ibs->sensors + cmd[2])) {
+ rsp[2] = IPMI_CC_REQ_ENTRY_NOT_PRESENT;
+ goto out;
+ }
+ sens = ibs->sensors + cmd[2];
+ IPMI_ADD_RSP_DATA(sens->reading);
+ IPMI_ADD_RSP_DATA(IPMI_SENSOR_GET_RET_STATUS(sens));
+ IPMI_ADD_RSP_DATA(sens->states & 0xff);
+ if (IPMI_SENSOR_IS_DISCRETE(sens)) {
+ IPMI_ADD_RSP_DATA((sens->states >> 8) & 0xff);
+ }
+ out:
+ return;
+}
+
+static const IPMICmdHandler chassis_cmds[IPMI_NETFN_CHASSIS_MAXCMD] = {
+ [IPMI_CMD_GET_CHASSIS_CAPABILITIES] = chassis_capabilities,
+ [IPMI_CMD_GET_CHASSIS_STATUS] = chassis_status,
+ [IPMI_CMD_CHASSIS_CONTROL] = chassis_control
+};
+static const IPMINetfn chassis_netfn = {
+ .cmd_nums = IPMI_NETFN_CHASSIS_MAXCMD,
+ .cmd_handlers = chassis_cmds
+};
+
+static const IPMICmdHandler
+sensor_event_cmds[IPMI_NETFN_SENSOR_EVENT_MAXCMD] = {
+ [IPMI_CMD_SET_SENSOR_EVT_ENABLE] = set_sensor_evt_enable,
+ [IPMI_CMD_GET_SENSOR_EVT_ENABLE] = get_sensor_evt_enable,
+ [IPMI_CMD_REARM_SENSOR_EVTS] = rearm_sensor_evts,
+ [IPMI_CMD_GET_SENSOR_EVT_STATUS] = get_sensor_evt_status,
+ [IPMI_CMD_GET_SENSOR_READING] = get_sensor_reading
+};
+static const IPMINetfn sensor_event_netfn = {
+ .cmd_nums = IPMI_NETFN_SENSOR_EVENT_MAXCMD,
+ .cmd_handlers = sensor_event_cmds
+};
+
+static const IPMICmdHandler app_cmds[IPMI_NETFN_APP_MAXCMD] = {
+ [IPMI_CMD_GET_DEVICE_ID] = get_device_id,
+ [IPMI_CMD_COLD_RESET] = cold_reset,
+ [IPMI_CMD_WARM_RESET] = warm_reset,
+ [IPMI_CMD_SET_BMC_GLOBAL_ENABLES] = set_bmc_global_enables,
+ [IPMI_CMD_GET_BMC_GLOBAL_ENABLES] = get_bmc_global_enables,
+ [IPMI_CMD_CLR_MSG_FLAGS] = clr_msg_flags,
+ [IPMI_CMD_GET_MSG_FLAGS] = get_msg_flags,
+ [IPMI_CMD_GET_MSG] = get_msg,
+ [IPMI_CMD_SEND_MSG] = send_msg,
+ [IPMI_CMD_READ_EVT_MSG_BUF] = read_evt_msg_buf,
+ [IPMI_CMD_RESET_WATCHDOG_TIMER] = reset_watchdog_timer,
+ [IPMI_CMD_SET_WATCHDOG_TIMER] = set_watchdog_timer,
+ [IPMI_CMD_GET_WATCHDOG_TIMER] = get_watchdog_timer,
+};
+static const IPMINetfn app_netfn = {
+ .cmd_nums = IPMI_NETFN_APP_MAXCMD,
+ .cmd_handlers = app_cmds
+};
+
+static const IPMICmdHandler storage_cmds[IPMI_NETFN_STORAGE_MAXCMD] = {
+ [IPMI_CMD_GET_SDR_REP_INFO] = get_sdr_rep_info,
+ [IPMI_CMD_RESERVE_SDR_REP] = reserve_sdr_rep,
+ [IPMI_CMD_GET_SDR] = get_sdr,
+ [IPMI_CMD_ADD_SDR] = add_sdr,
+ [IPMI_CMD_CLEAR_SDR_REP] = clear_sdr_rep,
+ [IPMI_CMD_GET_SEL_INFO] = get_sel_info,
+ [IPMI_CMD_RESERVE_SEL] = reserve_sel,
+ [IPMI_CMD_GET_SEL_ENTRY] = get_sel_entry,
+ [IPMI_CMD_ADD_SEL_ENTRY] = add_sel_entry,
+ [IPMI_CMD_CLEAR_SEL] = clear_sel,
+ [IPMI_CMD_GET_SEL_TIME] = get_sel_time,
+ [IPMI_CMD_SET_SEL_TIME] = set_sel_time,
+};
+
+static const IPMINetfn storage_netfn = {
+ .cmd_nums = IPMI_NETFN_STORAGE_MAXCMD,
+ .cmd_handlers = storage_cmds
+};
+
+static void register_cmds(IPMIBmcSim *s)
+{
+ ipmi_register_netfn(s, IPMI_NETFN_CHASSIS, &chassis_netfn);
+ ipmi_register_netfn(s, IPMI_NETFN_SENSOR_EVENT, &sensor_event_netfn);
+ ipmi_register_netfn(s, IPMI_NETFN_APP, &app_netfn);
+ ipmi_register_netfn(s, IPMI_NETFN_STORAGE, &storage_netfn);
+}
+
+static const uint8_t init_sdrs[] = {
+ /* Watchdog device */
+ 0x00, 0x00, 0x51, 0x02, 40, 0x20, 0x00, 0x00,
+ 0x23, 0x01, 0x63, 0x00, 0x23, 0x6f, 0x0f, 0x01,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc8,
+ 'W', 'a', 't', 'c', 'h', 'd', 'o', 'g',
+ /* End */
+ 0xff, 0xff, 0x00, 0x00, 0x00
+};
+
+static void ipmi_sim_init(Object *obj)
+{
+ IPMIBmc *b = IPMI_BMC(obj);
+ unsigned int i;
+ unsigned int next_recid, recid;
+ IPMIBmcSim *ibs = IPMI_BMC_SIMULATOR(b);
+
+ qemu_mutex_init(&ibs->lock);
+ QTAILQ_INIT(&ibs->rcvbufs);
+
+ ibs->bmc_global_enables = (1 << IPMI_BMC_EVENT_LOG_BIT);
+ ibs->device_id = 0x20;
+ ibs->ipmi_version = 0x02; /* IPMI 2.0 */
+ for (i = 0; i < 4; i++) {
+ ibs->sel.last_addition[i] = 0xff;
+ ibs->sel.last_clear[i] = 0xff;
+ ibs->sdr.last_addition[i] = 0xff;
+ ibs->sdr.last_clear[i] = 0xff;
+ }
+
+ next_recid = 0;
+ for (i = 0;;) {
+ int len;
+ if ((i + 5) > sizeof(init_sdrs)) {
+ error_report("Problem with recid 0x%4.4x\n", i);
+ return;
+ }
+ len = init_sdrs[i + 4];
+ recid = init_sdrs[i] | (init_sdrs[i + 1] << 8);
+ if (recid == 0xffff) {
+ break;
+ }
+ if ((i + len) > sizeof(init_sdrs)) {
+ error_report("Problem with recid 0x%4.4x\n", i);
+ return;
+ }
+ if (recid != next_recid) {
+ error_report("Problem with recid 0x%4.4x\n", i);
+ return;
+ }
+ sdr_add_entry(ibs, init_sdrs + i, len, NULL);
+ i += len;
+ }
+
+ ipmi_init_sensors_from_sdrs(ibs);
+ register_cmds(ibs);
+
+ ibs->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, ipmi_timeout, ibs);
+}
+
+static void ipmi_sim_class_init(ObjectClass *oc, void *data)
+{
+ IPMIBmcClass *bk = IPMI_BMC_CLASS(oc);
+
+ bk->handle_command = ipmi_sim_handle_command;
+}
+
+static const TypeInfo ipmi_sim_type = {
+ .name = TYPE_IPMI_BMC_SIMULATOR,
+ .parent = TYPE_IPMI_BMC,
+ .instance_size = sizeof(IPMIBmcSim),
+ .instance_init = ipmi_sim_init,
+ .class_init = ipmi_sim_class_init,
+};
+
+static void ipmi_sim_register_types(void)
+{
+ type_register_static(&ipmi_sim_type);
+}
+
+type_init(ipmi_sim_register_types)
--
1.8.3.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [Qemu-devel] [PATCH v3 03/16] ipmi: Add an external connection simulation interface
2015-06-09 1:11 [Qemu-devel] [PATCH v3 00/16] Add an IPMI device to QEMU minyard
2015-06-09 1:11 ` [Qemu-devel] [PATCH v3 01/16] Add a base IPMI interface minyard
2015-06-09 1:11 ` [Qemu-devel] [PATCH v3 02/16] ipmi: Add a local BMC simulation minyard
@ 2015-06-09 1:11 ` minyard
2015-06-09 1:11 ` [Qemu-devel] [PATCH v3 04/16] ipmi: Add an ISA KCS low-level interface minyard
` (15 subsequent siblings)
18 siblings, 0 replies; 31+ messages in thread
From: minyard @ 2015-06-09 1:11 UTC (permalink / raw)
To: qemu-devel; +Cc: Corey Minyard
From: Corey Minyard <cminyard@mvista.com>
This adds an interface for IPMI that connects to a remote
BMC over a chardev (generally a TCP socket). The OpenIPMI
lanserv simulator describes this interface, see that for
interface details.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
---
default-configs/i386-softmmu.mak | 1 +
default-configs/x86_64-softmmu.mak | 1 +
hw/ipmi/Makefile.objs | 1 +
hw/ipmi/ipmi_bmc_extern.c | 478 +++++++++++++++++++++++++++++++++++++
4 files changed, 481 insertions(+)
create mode 100644 hw/ipmi/ipmi_bmc_extern.c
diff --git a/default-configs/i386-softmmu.mak b/default-configs/i386-softmmu.mak
index 25fce7d..62d9c1e 100644
--- a/default-configs/i386-softmmu.mak
+++ b/default-configs/i386-softmmu.mak
@@ -10,6 +10,7 @@ CONFIG_VMWARE_VGA=y
CONFIG_VMMOUSE=y
CONFIG_IPMI=y
CONFIG_IPMI_LOCAL=y
+CONFIG_IPMI_EXTERN=y
CONFIG_SERIAL=y
CONFIG_PARALLEL=y
CONFIG_I8254=y
diff --git a/default-configs/x86_64-softmmu.mak b/default-configs/x86_64-softmmu.mak
index 2179574..0f12f45 100644
--- a/default-configs/x86_64-softmmu.mak
+++ b/default-configs/x86_64-softmmu.mak
@@ -10,6 +10,7 @@ CONFIG_VMWARE_VGA=y
CONFIG_VMMOUSE=y
CONFIG_IPMI=y
CONFIG_IPMI_LOCAL=y
+CONFIG_IPMI_EXTERN=y
CONFIG_SERIAL=y
CONFIG_PARALLEL=y
CONFIG_I8254=y
diff --git a/hw/ipmi/Makefile.objs b/hw/ipmi/Makefile.objs
index 875271c..ddb15ec 100644
--- a/hw/ipmi/Makefile.objs
+++ b/hw/ipmi/Makefile.objs
@@ -1,2 +1,3 @@
common-obj-$(CONFIG_IPMI) += ipmi.o
common-obj-$(CONFIG_IPMI_LOCAL) += ipmi_bmc_sim.o
+common-obj-$(CONFIG_IPMI_LOCAL) += ipmi_bmc_extern.o
diff --git a/hw/ipmi/ipmi_bmc_extern.c b/hw/ipmi/ipmi_bmc_extern.c
new file mode 100644
index 0000000..d4669f0
--- /dev/null
+++ b/hw/ipmi/ipmi_bmc_extern.c
@@ -0,0 +1,478 @@
+/*
+ * IPMI BMC external connection
+ *
+ * Copyright (c) 2015 Corey Minyard, MontaVista Software, LLC
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/*
+ * This is designed to connect with OpenIPMI's lanserv serial interface
+ * using the "VM" connection type. See that for details.
+ */
+
+#include <stdint.h>
+#include "qemu/timer.h"
+#include "sysemu/char.h"
+#include "hw/ipmi/ipmi.h"
+
+#define VM_MSG_CHAR 0xA0 /* Marks end of message */
+#define VM_CMD_CHAR 0xA1 /* Marks end of a command */
+#define VM_ESCAPE_CHAR 0xAA /* Set bit 4 from the next byte to 0 */
+
+#define VM_PROTOCOL_VERSION 1
+#define VM_CMD_VERSION 0xff /* A version number byte follows */
+#define VM_CMD_NOATTN 0x00
+#define VM_CMD_ATTN 0x01
+#define VM_CMD_ATTN_IRQ 0x02
+#define VM_CMD_POWEROFF 0x03
+#define VM_CMD_RESET 0x04
+#define VM_CMD_ENABLE_IRQ 0x05 /* Enable/disable the messaging irq */
+#define VM_CMD_DISABLE_IRQ 0x06
+#define VM_CMD_SEND_NMI 0x07
+#define VM_CMD_CAPABILITIES 0x08
+#define VM_CAPABILITIES_POWER 0x01
+#define VM_CAPABILITIES_RESET 0x02
+#define VM_CAPABILITIES_IRQ 0x04
+#define VM_CAPABILITIES_NMI 0x08
+#define VM_CAPABILITIES_ATTN 0x10
+
+#define TYPE_IPMI_BMC_EXTERN "ipmi-bmc-extern"
+#define IPMI_BMC_EXTERN(obj) OBJECT_CHECK(IPMIBmcExtern, (obj), \
+ TYPE_IPMI_BMC_EXTERN)
+typedef struct IPMIBmcExtern {
+ IPMIBmc parent;
+
+ CharDriverState *chr;
+
+ bool connected;
+
+ unsigned char inbuf[MAX_IPMI_MSG_SIZE + 2];
+ unsigned int inpos;
+ bool in_escape;
+ bool in_too_many;
+ bool waiting_rsp;
+ bool sending_cmd;
+
+ unsigned char outbuf[(MAX_IPMI_MSG_SIZE + 2) * 2 + 1];
+ unsigned int outpos;
+ unsigned int outlen;
+
+ struct QEMUTimer *extern_timer;
+
+ /* A reset event is pending to be sent upstream. */
+ bool send_reset;
+} IPMIBmcExtern;
+
+static int can_receive(void *opaque);
+static void receive(void *opaque, const uint8_t *buf, int size);
+static void chr_event(void *opaque, int event);
+
+static unsigned char
+ipmb_checksum(const unsigned char *data, int size, unsigned char start)
+{
+ unsigned char csum = start;
+
+ for (; size > 0; size--, data++) {
+ csum += *data;
+ }
+ return csum;
+}
+
+static void continue_send(IPMIBmcExtern *ibe)
+{
+ if (ibe->outlen == 0) {
+ goto check_reset;
+ }
+ send:
+ ibe->outpos += qemu_chr_fe_write(ibe->chr, ibe->outbuf + ibe->outpos,
+ ibe->outlen - ibe->outpos);
+ if (ibe->outpos < ibe->outlen) {
+ /* Not fully transmitted, try again in a 10ms */
+ timer_mod_ns(ibe->extern_timer,
+ qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 10000000);
+ } else {
+ /* Sent */
+ ibe->outlen = 0;
+ ibe->outpos = 0;
+ if (!ibe->sending_cmd) {
+ ibe->waiting_rsp = true;
+ } else {
+ ibe->sending_cmd = false;
+ }
+ check_reset:
+ if (ibe->connected && ibe->send_reset) {
+ /* Send the reset */
+ ibe->outbuf[0] = VM_CMD_RESET;
+ ibe->outbuf[1] = VM_CMD_CHAR;
+ ibe->outlen = 2;
+ ibe->outpos = 0;
+ ibe->send_reset = false;
+ ibe->sending_cmd = true;
+ goto send;
+ }
+
+ if (ibe->waiting_rsp) {
+ /* Make sure we get a response within 4 seconds. */
+ timer_mod_ns(ibe->extern_timer,
+ qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 4000000000ULL);
+ }
+ }
+ return;
+}
+
+static void extern_timeout(void *opaque)
+{
+ IPMIBmcExtern *ibe = opaque;
+ IPMIInterface *s = ibe->parent.intf;
+
+ if (ibe->connected) {
+ if (ibe->waiting_rsp && (ibe->outlen == 0)) {
+ IPMIInterfaceClass *k = IPMI_INTERFACE_GET_CLASS(s);
+ /* The message response timed out, return an error. */
+ ibe->waiting_rsp = false;
+ ibe->inbuf[1] = ibe->outbuf[1] | 0x04;
+ ibe->inbuf[2] = ibe->outbuf[2];
+ ibe->inbuf[3] = IPMI_CC_TIMEOUT;
+ k->handle_rsp(s, ibe->outbuf[0], ibe->inbuf + 1, 3);
+ } else {
+ continue_send(ibe);
+ }
+ }
+}
+
+static void addchar(IPMIBmcExtern *ibe, unsigned char ch)
+{
+ switch (ch) {
+ case VM_MSG_CHAR:
+ case VM_CMD_CHAR:
+ case VM_ESCAPE_CHAR:
+ ibe->outbuf[ibe->outlen] = VM_ESCAPE_CHAR;
+ ibe->outlen++;
+ ch |= 0x10;
+ /* No break */
+
+ default:
+ ibe->outbuf[ibe->outlen] = ch;
+ ibe->outlen++;
+ }
+}
+
+static void ipmi_bmc_extern_handle_command(IPMIBmc *b,
+ uint8_t *cmd, unsigned int cmd_len,
+ unsigned int max_cmd_len,
+ uint8_t msg_id)
+{
+ IPMIBmcExtern *ibe = IPMI_BMC_EXTERN(b);
+ IPMIInterface *s = ibe->parent.intf;
+ uint8_t err = 0, csum;
+ unsigned int i;
+
+ if (ibe->outlen) {
+ /* We already have a command queued. Shouldn't ever happen. */
+ fprintf(stderr, "IPMI KCS: Got command when not finished with the"
+ " previous commmand\n");
+ abort();
+ }
+
+ /* If it's too short or it was truncated, return an error. */
+ if (cmd_len < 2) {
+ err = IPMI_CC_REQUEST_DATA_LENGTH_INVALID;
+ } else if ((cmd_len > max_cmd_len) || (cmd_len > MAX_IPMI_MSG_SIZE)) {
+ err = IPMI_CC_REQUEST_DATA_TRUNCATED;
+ } else if (!ibe->connected) {
+ err = IPMI_CC_BMC_INIT_IN_PROGRESS;
+ }
+ if (err) {
+ IPMIInterfaceClass *k = IPMI_INTERFACE_GET_CLASS(s);
+ unsigned char rsp[3];
+ rsp[0] = cmd[0] | 0x04;
+ rsp[1] = cmd[1];
+ rsp[2] = err;
+ ibe->waiting_rsp = false;
+ k->handle_rsp(s, msg_id, rsp, 3);
+ goto out;
+ }
+
+ addchar(ibe, msg_id);
+ for (i = 0; i < cmd_len; i++) {
+ addchar(ibe, cmd[i]);
+ }
+ csum = ipmb_checksum(&msg_id, 1, 0);
+ addchar(ibe, -ipmb_checksum(cmd, cmd_len, csum));
+
+ ibe->outbuf[ibe->outlen] = VM_MSG_CHAR;
+ ibe->outlen++;
+
+ /* Start the transmit */
+ continue_send(ibe);
+
+ out:
+ return;
+}
+
+static void handle_hw_op(IPMIBmcExtern *ibe, unsigned char hw_op)
+{
+ IPMIInterface *s = ibe->parent.intf;
+ IPMIInterfaceClass *k = IPMI_INTERFACE_GET_CLASS(s);
+
+ switch (hw_op) {
+ case VM_CMD_VERSION:
+ /* We only support one version at this time. */
+ break;
+
+ case VM_CMD_NOATTN:
+ k->set_atn(s, 0, 0);
+ break;
+
+ case VM_CMD_ATTN:
+ k->set_atn(s, 1, 0);
+ break;
+
+ case VM_CMD_ATTN_IRQ:
+ k->set_atn(s, 1, 1);
+ break;
+
+ case VM_CMD_POWEROFF:
+ k->do_hw_op(s, IPMI_POWEROFF_CHASSIS, 0);
+ break;
+
+ case VM_CMD_RESET:
+ k->do_hw_op(s, IPMI_RESET_CHASSIS, 0);
+ break;
+
+ case VM_CMD_ENABLE_IRQ:
+ k->set_irq_enable(s, 1);
+ break;
+
+ case VM_CMD_DISABLE_IRQ:
+ k->set_irq_enable(s, 0);
+ break;
+
+ case VM_CMD_SEND_NMI:
+ k->do_hw_op(s, IPMI_SEND_NMI, 0);
+ break;
+ }
+}
+
+static void handle_msg(IPMIBmcExtern *ibe)
+{
+ IPMIInterfaceClass *k = IPMI_INTERFACE_GET_CLASS(ibe->parent.intf);
+
+ if (ibe->in_escape) {
+ ipmi_debug("msg escape not ended\n");
+ return;
+ }
+ if (ibe->inpos < 5) {
+ ipmi_debug("msg too short\n");
+ return;
+ }
+ if (ibe->in_too_many) {
+ ibe->inbuf[3] = IPMI_CC_REQUEST_DATA_TRUNCATED;
+ ibe->inpos = 4;
+ } else if (ipmb_checksum(ibe->inbuf, ibe->inpos, 0) != 0) {
+ ipmi_debug("msg checksum failure\n");
+ return;
+ } else {
+ ibe->inpos--; /* Remove checkum */
+ }
+
+ timer_del(ibe->extern_timer);
+ ibe->waiting_rsp = false;
+ k->handle_rsp(ibe->parent.intf, ibe->inbuf[0], ibe->inbuf + 1, ibe->inpos - 1);
+}
+
+static int can_receive(void *opaque)
+{
+ return 1;
+}
+
+static void receive(void *opaque, const uint8_t *buf, int size)
+{
+ IPMIBmcExtern *ibe = opaque;
+ int i;
+ unsigned char hw_op;
+
+ for (i = 0; i < size; i++) {
+ unsigned char ch = buf[i];
+
+ switch (ch) {
+ case VM_MSG_CHAR:
+ handle_msg(ibe);
+ ibe->in_too_many = false;
+ ibe->inpos = 0;
+ break;
+
+ case VM_CMD_CHAR:
+ if (ibe->in_too_many) {
+ ipmi_debug("cmd in too many\n");
+ ibe->in_too_many = false;
+ ibe->inpos = 0;
+ break;
+ }
+ if (ibe->in_escape) {
+ ipmi_debug("cmd in escape\n");
+ ibe->in_too_many = false;
+ ibe->inpos = 0;
+ ibe->in_escape = false;
+ break;
+ }
+ ibe->in_too_many = false;
+ if (ibe->inpos < 1) {
+ break;
+ }
+ hw_op = ibe->inbuf[0];
+ ibe->inpos = 0;
+ goto out_hw_op;
+ break;
+
+ case VM_ESCAPE_CHAR:
+ ibe->in_escape = true;
+ break;
+
+ default:
+ if (ibe->in_escape) {
+ ch &= ~0x10;
+ ibe->in_escape = false;
+ }
+ if (ibe->in_too_many) {
+ break;
+ }
+ if (ibe->inpos >= sizeof(ibe->inbuf)) {
+ ibe->in_too_many = true;
+ break;
+ }
+ ibe->inbuf[ibe->inpos] = ch;
+ ibe->inpos++;
+ break;
+ }
+ }
+ return;
+
+ out_hw_op:
+ handle_hw_op(ibe, hw_op);
+}
+
+static void chr_event(void *opaque, int event)
+{
+ IPMIBmcExtern *ibe = opaque;
+ IPMIInterface *s = ibe->parent.intf;
+ IPMIInterfaceClass *k = IPMI_INTERFACE_GET_CLASS(s);
+ unsigned char v;
+
+ switch (event) {
+ case CHR_EVENT_OPENED:
+ ibe->connected = true;
+ ibe->outpos = 0;
+ ibe->outlen = 0;
+ addchar(ibe, VM_CMD_VERSION);
+ addchar(ibe, VM_PROTOCOL_VERSION);
+ ibe->outbuf[ibe->outlen] = VM_CMD_CHAR;
+ ibe->outlen++;
+ addchar(ibe, VM_CMD_CAPABILITIES);
+ v = VM_CAPABILITIES_IRQ | VM_CAPABILITIES_ATTN;
+ if (k->do_hw_op(ibe->parent.intf, IPMI_POWEROFF_CHASSIS, 1) == 0) {
+ v |= VM_CAPABILITIES_POWER;
+ }
+ if (k->do_hw_op(ibe->parent.intf, IPMI_RESET_CHASSIS, 1) == 0) {
+ v |= VM_CAPABILITIES_RESET;
+ }
+ if (k->do_hw_op(ibe->parent.intf, IPMI_SEND_NMI, 1) == 0) {
+ v |= VM_CAPABILITIES_NMI;
+ }
+ addchar(ibe, v);
+ ibe->outbuf[ibe->outlen] = VM_CMD_CHAR;
+ ibe->outlen++;
+ ibe->sending_cmd = false;
+ continue_send(ibe);
+ break;
+
+ case CHR_EVENT_CLOSED:
+ if (!ibe->connected) {
+ return;
+ }
+ ibe->connected = false;
+ if (ibe->waiting_rsp) {
+ ibe->waiting_rsp = false;
+ ibe->inbuf[1] = ibe->outbuf[1] | 0x04;
+ ibe->inbuf[2] = ibe->outbuf[2];
+ ibe->inbuf[3] = IPMI_CC_BMC_INIT_IN_PROGRESS;
+ k->handle_rsp(s, ibe->outbuf[0], ibe->inbuf + 1, 3);
+ }
+ break;
+ }
+}
+
+static void ipmi_bmc_extern_handle_reset(IPMIBmc *b)
+{
+ IPMIBmcExtern *ibe = IPMI_BMC_EXTERN(b);
+
+ ibe->send_reset = true;
+ continue_send(ibe);
+}
+
+static void ipmi_bmc_extern_realize(DeviceState *dev, Error **errp)
+{
+ IPMIBmcExtern *ibe = IPMI_BMC_EXTERN(dev);
+
+ if (!ibe->chr) {
+ error_setg(errp, "IPMI external bmc requires chardev attribute");
+ return;
+ }
+
+ qemu_chr_add_handlers(ibe->chr, can_receive, receive, chr_event, ibe);
+}
+
+static void ipmi_bmc_extern_init(Object *obj)
+{
+ IPMIBmcExtern *ibe = IPMI_BMC_EXTERN(obj);
+
+ ibe->extern_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, extern_timeout, ibe);
+}
+
+static Property ipmi_bmc_extern_properties[] = {
+ DEFINE_PROP_CHR("chardev", IPMIBmcExtern, chr),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void ipmi_bmc_extern_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+ IPMIBmcClass *bk = IPMI_BMC_CLASS(oc);
+
+ bk->handle_command = ipmi_bmc_extern_handle_command;
+ bk->handle_reset = ipmi_bmc_extern_handle_reset;
+ dc->realize = ipmi_bmc_extern_realize;
+ dc->props = ipmi_bmc_extern_properties;
+}
+
+static const TypeInfo ipmi_bmc_extern_type = {
+ .name = TYPE_IPMI_BMC_EXTERN,
+ .parent = TYPE_IPMI_BMC,
+ .instance_size = sizeof(IPMIBmcExtern),
+ .instance_init = ipmi_bmc_extern_init,
+ .class_init = ipmi_bmc_extern_class_init,
+ };
+
+static void ipmi_bmc_extern_register_types(void)
+{
+ type_register_static(&ipmi_bmc_extern_type);
+}
+
+type_init(ipmi_bmc_extern_register_types)
--
1.8.3.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [Qemu-devel] [PATCH v3 04/16] ipmi: Add an ISA KCS low-level interface
2015-06-09 1:11 [Qemu-devel] [PATCH v3 00/16] Add an IPMI device to QEMU minyard
` (2 preceding siblings ...)
2015-06-09 1:11 ` [Qemu-devel] [PATCH v3 03/16] ipmi: Add an external connection simulation interface minyard
@ 2015-06-09 1:11 ` minyard
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 05/16] ipmi: Add a BT " minyard
` (14 subsequent siblings)
18 siblings, 0 replies; 31+ messages in thread
From: minyard @ 2015-06-09 1:11 UTC (permalink / raw)
To: qemu-devel; +Cc: Corey Minyard
From: Corey Minyard <cminyard@mvista.com>
This provides the simulation of the KCS hardware interface.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
---
default-configs/i386-softmmu.mak | 1 +
default-configs/x86_64-softmmu.mak | 1 +
hw/ipmi/Makefile.objs | 1 +
hw/ipmi/isa_ipmi_kcs.c | 452 +++++++++++++++++++++++++++++++++++++
4 files changed, 455 insertions(+)
create mode 100644 hw/ipmi/isa_ipmi_kcs.c
diff --git a/default-configs/i386-softmmu.mak b/default-configs/i386-softmmu.mak
index 62d9c1e..6d575f6 100644
--- a/default-configs/i386-softmmu.mak
+++ b/default-configs/i386-softmmu.mak
@@ -11,6 +11,7 @@ CONFIG_VMMOUSE=y
CONFIG_IPMI=y
CONFIG_IPMI_LOCAL=y
CONFIG_IPMI_EXTERN=y
+CONFIG_ISA_IPMI_KCS=y
CONFIG_SERIAL=y
CONFIG_PARALLEL=y
CONFIG_I8254=y
diff --git a/default-configs/x86_64-softmmu.mak b/default-configs/x86_64-softmmu.mak
index 0f12f45..59060f4 100644
--- a/default-configs/x86_64-softmmu.mak
+++ b/default-configs/x86_64-softmmu.mak
@@ -11,6 +11,7 @@ CONFIG_VMMOUSE=y
CONFIG_IPMI=y
CONFIG_IPMI_LOCAL=y
CONFIG_IPMI_EXTERN=y
+CONFIG_ISA_IPMI_KCS=y
CONFIG_SERIAL=y
CONFIG_PARALLEL=y
CONFIG_I8254=y
diff --git a/hw/ipmi/Makefile.objs b/hw/ipmi/Makefile.objs
index ddb15ec..28618c5 100644
--- a/hw/ipmi/Makefile.objs
+++ b/hw/ipmi/Makefile.objs
@@ -1,3 +1,4 @@
common-obj-$(CONFIG_IPMI) += ipmi.o
common-obj-$(CONFIG_IPMI_LOCAL) += ipmi_bmc_sim.o
common-obj-$(CONFIG_IPMI_LOCAL) += ipmi_bmc_extern.o
+common-obj-$(CONFIG_ISA_IPMI_KCS) += isa_ipmi_kcs.o
diff --git a/hw/ipmi/isa_ipmi_kcs.c b/hw/ipmi/isa_ipmi_kcs.c
new file mode 100644
index 0000000..750a725
--- /dev/null
+++ b/hw/ipmi/isa_ipmi_kcs.c
@@ -0,0 +1,452 @@
+/*
+ * QEMU ISA IPMI KCS emulation
+ *
+ * Copyright (c) 2015 Corey Minyard, MontaVista Software, LLC
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+#include "hw/hw.h"
+#include "hw/ipmi/ipmi.h"
+#include "hw/isa/isa.h"
+#include "hw/i386/pc.h"
+
+#define IPMI_KCS_OBF_BIT 0
+#define IPMI_KCS_IBF_BIT 1
+#define IPMI_KCS_SMS_ATN_BIT 2
+#define IPMI_KCS_CD_BIT 3
+
+#define IPMI_KCS_OBF_MASK (1 << IPMI_KCS_OBF_BIT)
+#define IPMI_KCS_GET_OBF(d) (((d) >> IPMI_KCS_OBF_BIT) & 0x1)
+#define IPMI_KCS_SET_OBF(d, v) (d) = (((d) & ~IPMI_KCS_OBF_MASK) | \
+ (((v) & 1) << IPMI_KCS_OBF_BIT))
+#define IPMI_KCS_IBF_MASK (1 << IPMI_KCS_IBF_BIT)
+#define IPMI_KCS_GET_IBF(d) (((d) >> IPMI_KCS_IBF_BIT) & 0x1)
+#define IPMI_KCS_SET_IBF(d, v) (d) = (((d) & ~IPMI_KCS_IBF_MASK) | \
+ (((v) & 1) << IPMI_KCS_IBF_BIT))
+#define IPMI_KCS_SMS_ATN_MASK (1 << IPMI_KCS_SMS_ATN_BIT)
+#define IPMI_KCS_GET_SMS_ATN(d) (((d) >> IPMI_KCS_SMS_ATN_BIT) & 0x1)
+#define IPMI_KCS_SET_SMS_ATN(d, v) (d) = (((d) & ~IPMI_KCS_SMS_ATN_MASK) | \
+ (((v) & 1) << IPMI_KCS_SMS_ATN_BIT))
+#define IPMI_KCS_CD_MASK (1 << IPMI_KCS_CD_BIT)
+#define IPMI_KCS_GET_CD(d) (((d) >> IPMI_KCS_CD_BIT) & 0x1)
+#define IPMI_KCS_SET_CD(d, v) (d) = (((d) & ~IPMI_KCS_CD_MASK) | \
+ (((v) & 1) << IPMI_KCS_CD_BIT))
+
+#define IPMI_KCS_IDLE_STATE 0
+#define IPMI_KCS_READ_STATE 1
+#define IPMI_KCS_WRITE_STATE 2
+#define IPMI_KCS_ERROR_STATE 3
+
+#define IPMI_KCS_GET_STATE(d) (((d) >> 6) & 0x3)
+#define IPMI_KCS_SET_STATE(d, v) ((d) = ((d) & ~0xc0) | (((v) & 0x3) << 6))
+
+#define IPMI_KCS_ABORT_STATUS_CMD 0x60
+#define IPMI_KCS_WRITE_START_CMD 0x61
+#define IPMI_KCS_WRITE_END_CMD 0x62
+#define IPMI_KCS_READ_CMD 0x68
+
+#define IPMI_KCS_STATUS_NO_ERR 0x00
+#define IPMI_KCS_STATUS_ABORTED_ERR 0x01
+#define IPMI_KCS_STATUS_BAD_CC_ERR 0x02
+#define IPMI_KCS_STATUS_LENGTH_ERR 0x06
+
+typedef struct IPMIKCS {
+ IPMIBmc *bmc;
+
+ bool do_wake;
+
+ qemu_irq irq;
+
+ uint32_t io_base;
+ unsigned long io_length;
+ MemoryRegion io;
+
+ bool obf_irq_set;
+ bool atn_irq_set;
+ bool use_irq;
+ bool irqs_enabled;
+
+ uint8_t outmsg[MAX_IPMI_MSG_SIZE];
+ uint32_t outpos;
+ uint32_t outlen;
+
+ uint8_t inmsg[MAX_IPMI_MSG_SIZE];
+ uint32_t inlen;
+ bool write_end;
+
+ uint8_t status_reg;
+ uint8_t data_out_reg;
+
+ int16_t data_in_reg; /* -1 means not written */
+ int16_t cmd_reg;
+
+ /*
+ * This is a response number that we send with the command to make
+ * sure that the response matches the command.
+ */
+ uint8_t waiting_rsp;
+} IPMIKCS;
+
+#define SET_OBF() \
+ do { \
+ IPMI_KCS_SET_OBF(ik->status_reg, 1); \
+ if (ik->use_irq && ik->irqs_enabled && !ik->obf_irq_set) { \
+ ik->obf_irq_set = 1; \
+ if (!ik->atn_irq_set) { \
+ qemu_irq_raise(ik->irq); \
+ } \
+ } \
+ } while (0)
+
+static void ipmi_kcs_signal(IPMIKCS *ik, IPMIInterface *ii)
+{
+ IPMIInterfaceClass *iic = IPMI_INTERFACE_GET_CLASS(ii);
+
+ ik->do_wake = 1;
+ while (ik->do_wake) {
+ ik->do_wake = 0;
+ iic->handle_if_event(ii);
+ }
+}
+
+static void ipmi_kcs_handle_event(IPMIInterface *ii)
+{
+ IPMIInterfaceClass *iic = IPMI_INTERFACE_GET_CLASS(ii);
+ IPMIKCS *ik = iic->get_backend_data(ii);
+
+ if (ik->cmd_reg == IPMI_KCS_ABORT_STATUS_CMD) {
+ if (IPMI_KCS_GET_STATE(ik->status_reg) != IPMI_KCS_ERROR_STATE) {
+ ik->waiting_rsp++; /* Invalidate the message */
+ ik->outmsg[0] = IPMI_KCS_STATUS_ABORTED_ERR;
+ ik->outlen = 1;
+ ik->outpos = 0;
+ IPMI_KCS_SET_STATE(ik->status_reg, IPMI_KCS_ERROR_STATE);
+ SET_OBF();
+ }
+ goto out;
+ }
+
+ switch (IPMI_KCS_GET_STATE(ik->status_reg)) {
+ case IPMI_KCS_IDLE_STATE:
+ if (ik->cmd_reg == IPMI_KCS_WRITE_START_CMD) {
+ IPMI_KCS_SET_STATE(ik->status_reg, IPMI_KCS_WRITE_STATE);
+ ik->cmd_reg = -1;
+ ik->write_end = 0;
+ ik->inlen = 0;
+ SET_OBF();
+ }
+ break;
+
+ case IPMI_KCS_READ_STATE:
+ handle_read:
+ if (ik->outpos >= ik->outlen) {
+ IPMI_KCS_SET_STATE(ik->status_reg, IPMI_KCS_IDLE_STATE);
+ SET_OBF();
+ } else if (ik->data_in_reg == IPMI_KCS_READ_CMD) {
+ ik->data_out_reg = ik->outmsg[ik->outpos];
+ ik->outpos++;
+ SET_OBF();
+ } else {
+ ik->outmsg[0] = IPMI_KCS_STATUS_BAD_CC_ERR;
+ ik->outlen = 1;
+ ik->outpos = 0;
+ IPMI_KCS_SET_STATE(ik->status_reg, IPMI_KCS_ERROR_STATE);
+ SET_OBF();
+ goto out;
+ }
+ break;
+
+ case IPMI_KCS_WRITE_STATE:
+ if (ik->data_in_reg != -1) {
+ /*
+ * Don't worry about input overrun here, that will be
+ * handled in the BMC.
+ */
+ if (ik->inlen < sizeof(ik->inmsg)) {
+ ik->inmsg[ik->inlen] = ik->data_in_reg;
+ }
+ ik->inlen++;
+ }
+ if (ik->write_end) {
+ IPMIBmcClass *bk = IPMI_BMC_GET_CLASS(ik->bmc);
+ ik->outlen = 0;
+ ik->write_end = 0;
+ ik->outpos = 0;
+ bk->handle_command(ik->bmc, ik->inmsg, ik->inlen, sizeof(ik->inmsg),
+ ik->waiting_rsp);
+ goto out_noibf;
+ } else if (ik->cmd_reg == IPMI_KCS_WRITE_END_CMD) {
+ ik->cmd_reg = -1;
+ ik->write_end = 1;
+ }
+ SET_OBF();
+ break;
+
+ case IPMI_KCS_ERROR_STATE:
+ if (ik->data_in_reg != -1) {
+ IPMI_KCS_SET_STATE(ik->status_reg, IPMI_KCS_READ_STATE);
+ ik->data_in_reg = IPMI_KCS_READ_CMD;
+ goto handle_read;
+ }
+ break;
+ }
+
+ if (ik->cmd_reg != -1) {
+ /* Got an invalid command */
+ ik->outmsg[0] = IPMI_KCS_STATUS_BAD_CC_ERR;
+ ik->outlen = 1;
+ ik->outpos = 0;
+ IPMI_KCS_SET_STATE(ik->status_reg, IPMI_KCS_ERROR_STATE);
+ }
+
+ out:
+ ik->cmd_reg = -1;
+ ik->data_in_reg = -1;
+ IPMI_KCS_SET_IBF(ik->status_reg, 0);
+ out_noibf:
+ return;
+}
+
+static void ipmi_kcs_handle_rsp(IPMIInterface *ii, uint8_t msg_id,
+ unsigned char *rsp, unsigned int rsp_len)
+{
+ IPMIInterfaceClass *iic = IPMI_INTERFACE_GET_CLASS(ii);
+ IPMIKCS *ik = iic->get_backend_data(ii);
+
+ if (ik->waiting_rsp == msg_id) {
+ ik->waiting_rsp++;
+ if (rsp_len > sizeof(ik->outmsg)) {
+ ik->outmsg[0] = rsp[0];
+ ik->outmsg[1] = rsp[1];
+ ik->outmsg[2] = IPMI_CC_CANNOT_RETURN_REQ_NUM_BYTES;
+ ik->outlen = 3;
+ } else {
+ memcpy(ik->outmsg, rsp, rsp_len);
+ ik->outlen = rsp_len;
+ }
+ IPMI_KCS_SET_STATE(ik->status_reg, IPMI_KCS_READ_STATE);
+ ik->data_in_reg = IPMI_KCS_READ_CMD;
+ ipmi_kcs_signal(ik, ii);
+ }
+}
+
+
+static uint64_t ipmi_kcs_ioport_read(void *opaque, hwaddr addr, unsigned size)
+{
+ IPMIInterface *ii = opaque;
+ IPMIInterfaceClass *iic = IPMI_INTERFACE_GET_CLASS(ii);
+ IPMIKCS *ik = iic->get_backend_data(ii);
+ uint32_t ret;
+
+ switch (addr & 1) {
+ case 0:
+ ret = ik->data_out_reg;
+ IPMI_KCS_SET_OBF(ik->status_reg, 0);
+ if (ik->obf_irq_set) {
+ ik->obf_irq_set = 0;
+ if (!ik->atn_irq_set) {
+ qemu_irq_lower(ik->irq);
+ }
+ }
+ break;
+ case 1:
+ ret = ik->status_reg;
+ if (ik->atn_irq_set) {
+ ik->atn_irq_set = 0;
+ if (!ik->obf_irq_set) {
+ qemu_irq_lower(ik->irq);
+ }
+ }
+ break;
+ }
+ return ret;
+}
+
+static void ipmi_kcs_ioport_write(void *opaque, hwaddr addr, uint64_t val,
+ unsigned size)
+{
+ IPMIInterface *ii = opaque;
+ IPMIInterfaceClass *iic = IPMI_INTERFACE_GET_CLASS(ii);
+ IPMIKCS *ik = iic->get_backend_data(ii);
+
+ if (IPMI_KCS_GET_IBF(ik->status_reg)) {
+ return;
+ }
+
+ switch (addr & 1) {
+ case 0:
+ ik->data_in_reg = val;
+ break;
+
+ case 1:
+ ik->cmd_reg = val;
+ break;
+ }
+ IPMI_KCS_SET_IBF(ik->status_reg, 1);
+ ipmi_kcs_signal(ik, ii);
+}
+
+const MemoryRegionOps ipmi_kcs_io_ops = {
+ .read = ipmi_kcs_ioport_read,
+ .write = ipmi_kcs_ioport_write,
+ .impl = {
+ .min_access_size = 1,
+ .max_access_size = 1,
+ },
+ .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static void ipmi_kcs_set_atn(IPMIInterface *ii, int val, int irq)
+{
+ IPMIInterfaceClass *iic = IPMI_INTERFACE_GET_CLASS(ii);
+ IPMIKCS *ik = iic->get_backend_data(ii);
+
+ IPMI_KCS_SET_SMS_ATN(ik->status_reg, val);
+ if (val) {
+ if (irq && !ik->atn_irq_set && ik->use_irq && ik->irqs_enabled) {
+ ik->atn_irq_set = 1;
+ if (!ik->obf_irq_set) {
+ qemu_irq_raise(ik->irq);
+ }
+ }
+ } else {
+ if (ik->atn_irq_set) {
+ ik->atn_irq_set = 0;
+ if (!ik->obf_irq_set) {
+ qemu_irq_lower(ik->irq);
+ }
+ }
+ }
+}
+
+static void ipmi_kcs_set_irq_enable(IPMIInterface *ii, int val)
+{
+ IPMIInterfaceClass *iic = IPMI_INTERFACE_GET_CLASS(ii);
+ IPMIKCS *ik = iic->get_backend_data(ii);
+
+ ik->irqs_enabled = val;
+}
+
+static void ipmi_kcs_init(IPMIInterface *ii, Error **errp)
+{
+ IPMIInterfaceClass *iic = IPMI_INTERFACE_GET_CLASS(ii);
+ IPMIKCS *ik = iic->get_backend_data(ii);
+
+ ik->io_length = 2;
+ memory_region_init_io(&ik->io, NULL, &ipmi_kcs_io_ops, ii, "ipmi-kcs", 2);
+}
+
+static void ipmi_kcs_class_init(IPMIInterfaceClass *iic)
+{
+ iic->init = ipmi_kcs_init;
+ iic->set_atn = ipmi_kcs_set_atn;
+ iic->handle_rsp = ipmi_kcs_handle_rsp;
+ iic->handle_if_event = ipmi_kcs_handle_event;
+ iic->set_irq_enable = ipmi_kcs_set_irq_enable;
+}
+
+
+#define TYPE_ISA_IPMI_KCS "isa-ipmi-kcs"
+#define ISA_IPMI_KCS(obj) OBJECT_CHECK(ISAIPMIKCSDevice, (obj), \
+ TYPE_ISA_IPMI_KCS)
+
+typedef struct ISAIPMIKCSDevice {
+ ISADevice dev;
+ int32 isairq;
+ IPMIKCS kcs;
+} ISAIPMIKCSDevice;
+
+static void ipmi_isa_realize(DeviceState *dev, Error **errp)
+{
+ ISADevice *isadev = ISA_DEVICE(dev);
+ ISAIPMIKCSDevice *iik = ISA_IPMI_KCS(dev);
+ IPMIInterface *ii = IPMI_INTERFACE(dev);
+ IPMIInterfaceClass *iic = IPMI_INTERFACE_GET_CLASS(ii);
+
+ if (!iik->kcs.bmc) {
+ error_setg(errp, "IPMI device requires a bmc attribute to be set");
+ return;
+ }
+
+ iik->kcs.bmc->intf = ii;
+
+ iic->init(ii, errp);
+ if (*errp)
+ return;
+
+ if (iik->isairq > 0) {
+ isa_init_irq(isadev, &iik->kcs.irq, iik->isairq);
+ iik->kcs.use_irq = 1;
+ }
+
+ qdev_set_legacy_instance_id(dev, iik->kcs.io_base, iik->kcs.io_length);
+
+ isa_register_ioport(isadev, &iik->kcs.io, iik->kcs.io_base);
+}
+
+static void isa_ipmi_kcs_init(Object *obj)
+{
+ ISAIPMIKCSDevice *iik = ISA_IPMI_KCS(obj);
+
+ ipmi_bmc_find_and_link(obj, (Object **) &iik->kcs.bmc);
+}
+
+static void *isa_ipmi_kcs_get_backend_data(IPMIInterface *ii)
+{
+ ISAIPMIKCSDevice *iik = ISA_IPMI_KCS(ii);
+
+ return &iik->kcs;
+}
+
+static Property ipmi_isa_properties[] = {
+ DEFINE_PROP_UINT32("ioport", ISAIPMIKCSDevice, kcs.io_base, 0xca2),
+ DEFINE_PROP_INT32("irq", ISAIPMIKCSDevice, isairq, 5),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void isa_ipmi_kcs_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+ IPMIInterfaceClass *iic = IPMI_INTERFACE_CLASS(oc);
+
+ dc->realize = ipmi_isa_realize;
+ dc->props = ipmi_isa_properties;
+
+ iic->get_backend_data = isa_ipmi_kcs_get_backend_data;
+ ipmi_kcs_class_init(iic);
+}
+
+static const TypeInfo isa_ipmi_kcs_info = {
+ .name = TYPE_ISA_IPMI_KCS,
+ .parent = TYPE_ISA_DEVICE,
+ .instance_size = sizeof(ISAIPMIKCSDevice),
+ .instance_init = isa_ipmi_kcs_init,
+ .class_init = isa_ipmi_kcs_class_init,
+ .interfaces = (InterfaceInfo[]) {
+ { TYPE_IPMI_INTERFACE },
+ { }
+ }
+};
+
+static void ipmi_register_types(void)
+{
+ type_register_static(&isa_ipmi_kcs_info);
+}
+
+type_init(ipmi_register_types)
--
1.8.3.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [Qemu-devel] [PATCH v3 05/16] ipmi: Add a BT low-level interface
2015-06-09 1:11 [Qemu-devel] [PATCH v3 00/16] Add an IPMI device to QEMU minyard
` (3 preceding siblings ...)
2015-06-09 1:11 ` [Qemu-devel] [PATCH v3 04/16] ipmi: Add an ISA KCS low-level interface minyard
@ 2015-06-09 1:12 ` minyard
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 06/16] ipmi: Add tests minyard
` (13 subsequent siblings)
18 siblings, 0 replies; 31+ messages in thread
From: minyard @ 2015-06-09 1:12 UTC (permalink / raw)
To: qemu-devel; +Cc: Corey Minyard
From: Corey Minyard <cminyard@mvista.com>
This provides the simulation of the BT hardware interface for
IPMI.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
---
default-configs/i386-softmmu.mak | 1 +
default-configs/x86_64-softmmu.mak | 1 +
hw/ipmi/Makefile.objs | 1 +
hw/ipmi/isa_ipmi_bt.c | 489 +++++++++++++++++++++++++++++++++++++
4 files changed, 492 insertions(+)
create mode 100644 hw/ipmi/isa_ipmi_bt.c
diff --git a/default-configs/i386-softmmu.mak b/default-configs/i386-softmmu.mak
index 6d575f6..c1c9d4a 100644
--- a/default-configs/i386-softmmu.mak
+++ b/default-configs/i386-softmmu.mak
@@ -12,6 +12,7 @@ CONFIG_IPMI=y
CONFIG_IPMI_LOCAL=y
CONFIG_IPMI_EXTERN=y
CONFIG_ISA_IPMI_KCS=y
+CONFIG_ISA_IPMI_BT=y
CONFIG_SERIAL=y
CONFIG_PARALLEL=y
CONFIG_I8254=y
diff --git a/default-configs/x86_64-softmmu.mak b/default-configs/x86_64-softmmu.mak
index 59060f4..84b18a8 100644
--- a/default-configs/x86_64-softmmu.mak
+++ b/default-configs/x86_64-softmmu.mak
@@ -12,6 +12,7 @@ CONFIG_IPMI=y
CONFIG_IPMI_LOCAL=y
CONFIG_IPMI_EXTERN=y
CONFIG_ISA_IPMI_KCS=y
+CONFIG_ISA_IPMI_BT=y
CONFIG_SERIAL=y
CONFIG_PARALLEL=y
CONFIG_I8254=y
diff --git a/hw/ipmi/Makefile.objs b/hw/ipmi/Makefile.objs
index 28618c5..a90318d 100644
--- a/hw/ipmi/Makefile.objs
+++ b/hw/ipmi/Makefile.objs
@@ -2,3 +2,4 @@ common-obj-$(CONFIG_IPMI) += ipmi.o
common-obj-$(CONFIG_IPMI_LOCAL) += ipmi_bmc_sim.o
common-obj-$(CONFIG_IPMI_LOCAL) += ipmi_bmc_extern.o
common-obj-$(CONFIG_ISA_IPMI_KCS) += isa_ipmi_kcs.o
+common-obj-$(CONFIG_ISA_IPMI_BT) += isa_ipmi_bt.o
diff --git a/hw/ipmi/isa_ipmi_bt.c b/hw/ipmi/isa_ipmi_bt.c
new file mode 100644
index 0000000..70e2c0d
--- /dev/null
+++ b/hw/ipmi/isa_ipmi_bt.c
@@ -0,0 +1,489 @@
+/*
+ * QEMU ISA IPMI BT emulation
+ *
+ * Copyright (c) 2015 Corey Minyard, MontaVista Software, LLC
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+#include "hw/hw.h"
+#include "hw/ipmi/ipmi.h"
+#include "hw/isa/isa.h"
+#include "hw/i386/pc.h"
+
+/* Control register */
+#define IPMI_BT_CLR_WR_BIT 0
+#define IPMI_BT_CLR_RD_BIT 1
+#define IPMI_BT_H2B_ATN_BIT 2
+#define IPMI_BT_B2H_ATN_BIT 3
+#define IPMI_BT_SMS_ATN_BIT 4
+#define IPMI_BT_HBUSY_BIT 6
+#define IPMI_BT_BBUSY_BIT 7
+
+#define IPMI_BT_CLR_WR_MASK (1 << IPMI_BT_CLR_WR_BIT)
+#define IPMI_BT_GET_CLR_WR(d) (((d) >> IPMI_BT_CLR_WR_BIT) & 0x1)
+#define IPMI_BT_SET_CLR_WR(d, v) (d) = (((d) & ~IPMI_BT_CLR_WR_MASK) | \
+ (((v & 1) << IPMI_BT_CLR_WR_BIT)))
+
+#define IPMI_BT_CLR_RD_MASK (1 << IPMI_BT_CLR_RD_BIT)
+#define IPMI_BT_GET_CLR_RD(d) (((d) >> IPMI_BT_CLR_RD_BIT) & 0x1)
+#define IPMI_BT_SET_CLR_RD(d, v) (d) = (((d) & ~IPMI_BT_CLR_RD_MASK) | \
+ (((v & 1) << IPMI_BT_CLR_RD_BIT)))
+
+#define IPMI_BT_H2B_ATN_MASK (1 << IPMI_BT_H2B_ATN_BIT)
+#define IPMI_BT_GET_H2B_ATN(d) (((d) >> IPMI_BT_H2B_ATN_BIT) & 0x1)
+#define IPMI_BT_SET_H2B_ATN(d, v) (d) = (((d) & ~IPMI_BT_H2B_ATN_MASK) | \
+ (((v & 1) << IPMI_BT_H2B_ATN_BIT)))
+
+#define IPMI_BT_B2H_ATN_MASK (1 << IPMI_BT_B2H_ATN_BIT)
+#define IPMI_BT_GET_B2H_ATN(d) (((d) >> IPMI_BT_B2H_ATN_BIT) & 0x1)
+#define IPMI_BT_SET_B2H_ATN(d, v) (d) = (((d) & ~IPMI_BT_B2H_ATN_MASK) | \
+ (((v & 1) << IPMI_BT_B2H_ATN_BIT)))
+
+#define IPMI_BT_SMS_ATN_MASK (1 << IPMI_BT_SMS_ATN_BIT)
+#define IPMI_BT_GET_SMS_ATN(d) (((d) >> IPMI_BT_SMS_ATN_BIT) & 0x1)
+#define IPMI_BT_SET_SMS_ATN(d, v) (d) = (((d) & ~IPMI_BT_SMS_ATN_MASK) | \
+ (((v & 1) << IPMI_BT_SMS_ATN_BIT)))
+
+#define IPMI_BT_HBUSY_MASK (1 << IPMI_BT_HBUSY_BIT)
+#define IPMI_BT_GET_HBUSY(d) (((d) >> IPMI_BT_HBUSY_BIT) & 0x1)
+#define IPMI_BT_SET_HBUSY(d, v) (d) = (((d) & ~IPMI_BT_HBUSY_MASK) | \
+ (((v & 1) << IPMI_BT_HBUSY_BIT)))
+
+#define IPMI_BT_BBUSY_MASK (1 << IPMI_BT_BBUSY_BIT)
+#define IPMI_BT_GET_BBUSY(d) (((d) >> IPMI_BT_BBUSY_BIT) & 0x1)
+#define IPMI_BT_SET_BBUSY(d, v) (d) = (((d) & ~IPMI_BT_BBUSY_MASK) | \
+ (((v & 1) << IPMI_BT_BBUSY_BIT)))
+
+
+/* Mask register */
+#define IPMI_BT_B2H_IRQ_EN_BIT 0
+#define IPMI_BT_B2H_IRQ_BIT 1
+
+#define IPMI_BT_B2H_IRQ_EN_MASK (1 << IPMI_BT_B2H_IRQ_EN_BIT)
+#define IPMI_BT_GET_B2H_IRQ_EN(d) (((d) >> IPMI_BT_B2H_IRQ_EN_BIT) & 0x1)
+#define IPMI_BT_SET_B2H_IRQ_EN(d, v) (d) = (((d) & ~IPMI_BT_B2H_IRQ_EN_MASK) | \
+ (((v & 1) << IPMI_BT_B2H_IRQ_EN_BIT)))
+
+#define IPMI_BT_B2H_IRQ_MASK (1 << IPMI_BT_B2H_IRQ_BIT)
+#define IPMI_BT_GET_B2H_IRQ(d) (((d) >> IPMI_BT_B2H_IRQ_BIT) & 0x1)
+#define IPMI_BT_SET_B2H_IRQ(d, v) (d) = (((d) & ~IPMI_BT_B2H_IRQ_MASK) | \
+ (((v & 1) << IPMI_BT_B2H_IRQ_BIT)))
+
+typedef struct IPMIBT {
+ IPMIBmc *bmc;
+
+ bool do_wake;
+
+ qemu_irq irq;
+
+ uint32_t io_base;
+ unsigned long io_length;
+ MemoryRegion io;
+
+ bool obf_irq_set;
+ bool atn_irq_set;
+ bool use_irq;
+ bool irqs_enabled;
+
+ uint8_t outmsg[MAX_IPMI_MSG_SIZE];
+ uint32_t outpos;
+ uint32_t outlen;
+
+ uint8_t inmsg[MAX_IPMI_MSG_SIZE];
+ uint32_t inlen;
+
+ uint8_t control_reg;
+ uint8_t mask_reg;
+
+ /*
+ * This is a response number that we send with the command to make
+ * sure that the response matches the command.
+ */
+ uint8_t waiting_rsp;
+ uint8_t waiting_seq;
+} IPMIBT;
+
+#define IPMI_CMD_GET_BT_INTF_CAP 0x36
+
+static void ipmi_bt_handle_event(IPMIInterface *ii)
+{
+ IPMIInterfaceClass *iic = IPMI_INTERFACE_GET_CLASS(ii);
+ IPMIBT *ib = iic->get_backend_data(ii);
+
+ if (ib->inlen < 4) {
+ goto out;
+ }
+ /* Note that overruns are handled by handle_command */
+ if (ib->inmsg[0] != (ib->inlen - 1)) {
+ /* Length mismatch, just ignore. */
+ IPMI_BT_SET_BBUSY(ib->control_reg, 1);
+ ib->inlen = 0;
+ goto out;
+ }
+ if ((ib->inmsg[1] == (IPMI_NETFN_APP << 2)) &&
+ (ib->inmsg[3] == IPMI_CMD_GET_BT_INTF_CAP)) {
+ /* We handle this one ourselves. */
+ ib->outmsg[0] = 9;
+ ib->outmsg[1] = ib->inmsg[1] | 0x04;
+ ib->outmsg[2] = ib->inmsg[2];
+ ib->outmsg[3] = ib->inmsg[3];
+ ib->outmsg[4] = 0;
+ ib->outmsg[5] = 1; /* Only support 1 outstanding request. */
+ if (sizeof(ib->inmsg) > 0xff) { /* Input buffer size */
+ ib->outmsg[6] = 0xff;
+ } else {
+ ib->outmsg[6] = (unsigned char) sizeof(ib->inmsg);
+ }
+ if (sizeof(ib->outmsg) > 0xff) { /* Output buffer size */
+ ib->outmsg[7] = 0xff;
+ } else {
+ ib->outmsg[7] = (unsigned char) sizeof(ib->outmsg);
+ }
+ ib->outmsg[8] = 10; /* Max request to response time */
+ ib->outmsg[9] = 0; /* Don't recommend retries */
+ ib->outlen = 10;
+ IPMI_BT_SET_BBUSY(ib->control_reg, 0);
+ IPMI_BT_SET_B2H_ATN(ib->control_reg, 1);
+ if (ib->use_irq && ib->irqs_enabled &&
+ !IPMI_BT_GET_B2H_IRQ(ib->mask_reg) &&
+ IPMI_BT_GET_B2H_IRQ_EN(ib->mask_reg)) {
+ IPMI_BT_SET_B2H_IRQ(ib->mask_reg, 1);
+ qemu_irq_raise(ib->irq);
+ }
+ goto out;
+ }
+ ib->waiting_seq = ib->inmsg[2];
+ ib->inmsg[2] = ib->inmsg[1];
+ {
+ IPMIBmcClass *bk = IPMI_BMC_GET_CLASS(ib->bmc);
+ bk->handle_command(ib->bmc, ib->inmsg + 2, ib->inlen - 2,
+ sizeof(ib->inmsg), ib->waiting_rsp);
+ }
+ out:
+ return;
+}
+
+static void ipmi_bt_handle_rsp(IPMIInterface *ii, uint8_t msg_id,
+ unsigned char *rsp, unsigned int rsp_len)
+{
+ IPMIInterfaceClass *iic = IPMI_INTERFACE_GET_CLASS(ii);
+ IPMIBT *ib = iic->get_backend_data(ii);
+
+ if (ib->waiting_rsp == msg_id) {
+ ib->waiting_rsp++;
+ if (rsp_len > (sizeof(ib->outmsg) - 2)) {
+ ib->outmsg[0] = 4;
+ ib->outmsg[1] = rsp[0];
+ ib->outmsg[2] = ib->waiting_seq;
+ ib->outmsg[3] = rsp[1];
+ ib->outmsg[4] = IPMI_CC_CANNOT_RETURN_REQ_NUM_BYTES;
+ ib->outlen = 5;
+ } else {
+ ib->outmsg[0] = rsp_len + 1;
+ ib->outmsg[1] = rsp[0];
+ ib->outmsg[2] = ib->waiting_seq;
+ memcpy(ib->outmsg + 3, rsp + 1, rsp_len - 1);
+ ib->outlen = rsp_len + 2;
+ }
+ IPMI_BT_SET_BBUSY(ib->control_reg, 0);
+ IPMI_BT_SET_B2H_ATN(ib->control_reg, 1);
+ if (ib->use_irq && ib->irqs_enabled &&
+ !IPMI_BT_GET_B2H_IRQ(ib->mask_reg) &&
+ IPMI_BT_GET_B2H_IRQ_EN(ib->mask_reg)) {
+ IPMI_BT_SET_B2H_IRQ(ib->mask_reg, 1);
+ qemu_irq_raise(ib->irq);
+ }
+ }
+}
+
+
+static uint64_t ipmi_bt_ioport_read(void *opaque, hwaddr addr, unsigned size)
+{
+ IPMIInterface *ii = opaque;
+ IPMIInterfaceClass *iic = IPMI_INTERFACE_GET_CLASS(ii);
+ IPMIBT *ib = iic->get_backend_data(ii);
+ uint32_t ret = 0xff;
+
+ switch (addr & 3) {
+ case 0:
+ ret = ib->control_reg;
+ break;
+ case 1:
+ if (ib->outpos < ib->outlen) {
+ ret = ib->outmsg[ib->outpos];
+ ib->outpos++;
+ if (ib->outpos == ib->outlen) {
+ ib->outpos = 0;
+ ib->outlen = 0;
+ }
+ } else {
+ ret = 0xff;
+ }
+ break;
+ case 2:
+ ret = ib->mask_reg;
+ break;
+ }
+ return ret;
+}
+
+static void ipmi_bt_signal(IPMIBT *ib, IPMIInterface *ii)
+{
+ IPMIInterfaceClass *iic = IPMI_INTERFACE_GET_CLASS(ii);
+
+ ib->do_wake = 1;
+ while (ib->do_wake) {
+ ib->do_wake = 0;
+ iic->handle_if_event(ii);
+ }
+}
+
+static void ipmi_bt_ioport_write(void *opaque, hwaddr addr, uint64_t val,
+ unsigned size)
+{
+ IPMIInterface *ii = opaque;
+ IPMIInterfaceClass *iic = IPMI_INTERFACE_GET_CLASS(ii);
+ IPMIBT *ib = iic->get_backend_data(ii);
+
+ switch (addr & 3) {
+ case 0:
+ if (IPMI_BT_GET_CLR_WR(val)) {
+ ib->inlen = 0;
+ }
+ if (IPMI_BT_GET_CLR_RD(val)) {
+ ib->outpos = 0;
+ }
+ if (IPMI_BT_GET_B2H_ATN(val)) {
+ IPMI_BT_SET_B2H_ATN(ib->control_reg, 0);
+ }
+ if (IPMI_BT_GET_SMS_ATN(val)) {
+ IPMI_BT_SET_SMS_ATN(ib->control_reg, 0);
+ }
+ if (IPMI_BT_GET_HBUSY(val)) {
+ /* Toggle */
+ IPMI_BT_SET_HBUSY(ib->control_reg,
+ !IPMI_BT_GET_HBUSY(ib->control_reg));
+ }
+ if (IPMI_BT_GET_H2B_ATN(val)) {
+ IPMI_BT_SET_BBUSY(ib->control_reg, 1);
+ ipmi_bt_signal(ib, ii);
+ }
+ break;
+
+ case 1:
+ if (ib->inlen < sizeof(ib->inmsg)) {
+ ib->inmsg[ib->inlen] = val;
+ }
+ ib->inlen++;
+ break;
+
+ case 2:
+ if (IPMI_BT_GET_B2H_IRQ_EN(val) !=
+ IPMI_BT_GET_B2H_IRQ_EN(ib->mask_reg)) {
+ if (IPMI_BT_GET_B2H_IRQ_EN(val)) {
+ if (IPMI_BT_GET_B2H_ATN(ib->control_reg) ||
+ IPMI_BT_GET_SMS_ATN(ib->control_reg)) {
+ IPMI_BT_SET_B2H_IRQ(ib->mask_reg, 1);
+ qemu_irq_raise(ib->irq);
+ }
+ IPMI_BT_SET_B2H_IRQ_EN(ib->mask_reg, 1);
+ } else {
+ if (IPMI_BT_GET_B2H_IRQ(ib->mask_reg)) {
+ IPMI_BT_SET_B2H_IRQ(ib->mask_reg, 0);
+ qemu_irq_lower(ib->irq);
+ }
+ IPMI_BT_SET_B2H_IRQ_EN(ib->mask_reg, 0);
+ }
+ }
+ if (IPMI_BT_GET_B2H_IRQ(val) && IPMI_BT_GET_B2H_IRQ(ib->mask_reg)) {
+ IPMI_BT_SET_B2H_IRQ(ib->mask_reg, 0);
+ qemu_irq_lower(ib->irq);
+ }
+ break;
+ }
+}
+
+static const MemoryRegionOps ipmi_bt_io_ops = {
+ .read = ipmi_bt_ioport_read,
+ .write = ipmi_bt_ioport_write,
+ .impl = {
+ .min_access_size = 1,
+ .max_access_size = 1,
+ },
+ .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static void ipmi_bt_set_atn(IPMIInterface *ii, int val, int irq)
+{
+ IPMIInterfaceClass *iic = IPMI_INTERFACE_GET_CLASS(ii);
+ IPMIBT *ib = iic->get_backend_data(ii);
+
+ if (!!val == IPMI_BT_GET_SMS_ATN(ib->control_reg)) {
+ return;
+ }
+
+ IPMI_BT_SET_SMS_ATN(ib->control_reg, val);
+ if (val) {
+ if (irq && ib->use_irq && ib->irqs_enabled &&
+ !IPMI_BT_GET_B2H_ATN(ib->control_reg) &&
+ IPMI_BT_GET_B2H_IRQ_EN(ib->mask_reg)) {
+ IPMI_BT_SET_B2H_IRQ(ib->mask_reg, 1);
+ qemu_irq_raise(ib->irq);
+ }
+ } else {
+ if (!IPMI_BT_GET_B2H_ATN(ib->control_reg) &&
+ IPMI_BT_GET_B2H_IRQ(ib->mask_reg)) {
+ IPMI_BT_SET_B2H_IRQ(ib->mask_reg, 0);
+ qemu_irq_lower(ib->irq);
+ }
+ }
+}
+
+static void ipmi_bt_handle_reset(IPMIInterface *ii, bool is_cold)
+{
+ IPMIInterfaceClass *iic = IPMI_INTERFACE_GET_CLASS(ii);
+ IPMIBT *ib = iic->get_backend_data(ii);
+
+ if (is_cold) {
+ /* Disable the BT interrupt on reset */
+ if (IPMI_BT_GET_B2H_IRQ(ib->mask_reg)) {
+ IPMI_BT_SET_B2H_IRQ(ib->mask_reg, 0);
+ qemu_irq_lower(ib->irq);
+ }
+ IPMI_BT_SET_B2H_IRQ_EN(ib->mask_reg, 0);
+ }
+}
+
+static void ipmi_bt_set_irq_enable(IPMIInterface *ii, int val)
+{
+ IPMIInterfaceClass *iic = IPMI_INTERFACE_GET_CLASS(ii);
+ IPMIBT *ib = iic->get_backend_data(ii);
+
+ ib->irqs_enabled = val;
+}
+
+static void ipmi_bt_init(IPMIInterface *ii, Error **errp)
+{
+ IPMIInterfaceClass *iic = IPMI_INTERFACE_GET_CLASS(ii);
+ IPMIBT *ib = iic->get_backend_data(ii);
+
+ ib->io_length = 3;
+
+ memory_region_init_io(&ib->io, NULL, &ipmi_bt_io_ops, ii, "ipmi-bt", 3);
+}
+
+static void ipmi_bt_class_init(IPMIInterfaceClass *iic)
+{
+ iic->init = ipmi_bt_init;
+ iic->set_atn = ipmi_bt_set_atn;
+ iic->handle_rsp = ipmi_bt_handle_rsp;
+ iic->handle_if_event = ipmi_bt_handle_event;
+ iic->set_irq_enable = ipmi_bt_set_irq_enable;
+ iic->reset = ipmi_bt_handle_reset;
+}
+
+
+#define TYPE_ISA_IPMI_BT "isa-ipmi-bt"
+#define ISA_IPMI_BT(obj) OBJECT_CHECK(ISAIPMIBTDevice, (obj), \
+ TYPE_ISA_IPMI_BT)
+
+typedef struct ISAIPMIBTDevice {
+ ISADevice dev;
+ int32 isairq;
+ IPMIBT bt;
+} ISAIPMIBTDevice;
+
+static void isa_ipmi_bt_realize(DeviceState *dev, Error **errp)
+{
+ ISADevice *isadev = ISA_DEVICE(dev);
+ ISAIPMIBTDevice *iib = ISA_IPMI_BT(dev);
+ IPMIInterface *ii = IPMI_INTERFACE(dev);
+ IPMIInterfaceClass *iic = IPMI_INTERFACE_GET_CLASS(ii);
+
+ if (!iib->bt.bmc) {
+ error_setg(errp, "IPMI device requires a bmc attribute to be set");
+ return;
+ }
+
+ iib->bt.bmc->intf = ii;
+
+ iic->init(ii, errp);
+ if (*errp)
+ return;
+
+ if (iib->isairq > 0) {
+ isa_init_irq(isadev, &iib->bt.irq, iib->isairq);
+ iib->bt.use_irq = 1;
+ }
+
+ qdev_set_legacy_instance_id(dev, iib->bt.io_base, iib->bt.io_length);
+
+ isa_register_ioport(isadev, &iib->bt.io, iib->bt.io_base);
+}
+
+static void isa_ipmi_bt_init(Object *obj)
+{
+ ISAIPMIBTDevice *iib = ISA_IPMI_BT(obj);
+
+ ipmi_bmc_find_and_link(obj, (Object **) &iib->bt.bmc);
+}
+
+static void *isa_ipmi_bt_get_backend_data(IPMIInterface *ii)
+{
+ ISAIPMIBTDevice *iib = ISA_IPMI_BT(ii);
+
+ return &iib->bt;
+}
+
+static Property ipmi_isa_properties[] = {
+ DEFINE_PROP_UINT32("ioport", ISAIPMIBTDevice, bt.io_base, 0xe4),
+ DEFINE_PROP_INT32("irq", ISAIPMIBTDevice, isairq, 5),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void isa_ipmi_bt_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+ IPMIInterfaceClass *iic = IPMI_INTERFACE_CLASS(oc);
+
+ dc->realize = isa_ipmi_bt_realize;
+ dc->props = ipmi_isa_properties;
+
+ iic->get_backend_data = isa_ipmi_bt_get_backend_data;
+ ipmi_bt_class_init(iic);
+}
+
+static const TypeInfo isa_ipmi_bt_info = {
+ .name = TYPE_ISA_IPMI_BT,
+ .parent = TYPE_ISA_DEVICE,
+ .instance_size = sizeof(ISAIPMIBTDevice),
+ .instance_init = isa_ipmi_bt_init,
+ .class_init = isa_ipmi_bt_class_init,
+ .interfaces = (InterfaceInfo[]) {
+ { TYPE_IPMI_INTERFACE },
+ { }
+ }
+};
+
+static void ipmi_register_types(void)
+{
+ type_register_static(&isa_ipmi_bt_info);
+}
+
+type_init(ipmi_register_types)
--
1.8.3.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [Qemu-devel] [PATCH v3 06/16] ipmi: Add tests
2015-06-09 1:11 [Qemu-devel] [PATCH v3 00/16] Add an IPMI device to QEMU minyard
` (4 preceding siblings ...)
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 05/16] ipmi: Add a BT " minyard
@ 2015-06-09 1:12 ` minyard
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 07/16] ipmi: Add documentation minyard
` (12 subsequent siblings)
18 siblings, 0 replies; 31+ messages in thread
From: minyard @ 2015-06-09 1:12 UTC (permalink / raw)
To: qemu-devel; +Cc: Corey Minyard
From: Corey Minyard <cminyard@mvista.com>
Test the KCS interface with a local BMC and a BT interface with an
external BMC.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
---
tests/Makefile | 4 +
tests/ipmi-bt-test.c | 441 ++++++++++++++++++++++++++++++++++++++++++++++++++
tests/ipmi-kcs-test.c | 295 +++++++++++++++++++++++++++++++++
3 files changed, 740 insertions(+)
create mode 100644 tests/ipmi-bt-test.c
create mode 100644 tests/ipmi-kcs-test.c
diff --git a/tests/Makefile b/tests/Makefile
index 55aa745..404547c 100644
--- a/tests/Makefile
+++ b/tests/Makefile
@@ -146,6 +146,8 @@ gcov-files-i386-y += hw/block/hd-geometry.c
check-qtest-i386-y += tests/boot-order-test$(EXESUF)
check-qtest-i386-y += tests/bios-tables-test$(EXESUF)
check-qtest-i386-y += tests/rtc-test$(EXESUF)
+check-qtest-i386-y += tests/ipmi-kcs-test$(EXESUF)
+check-qtest-i386-y += tests/ipmi-bt-test$(EXESUF)
check-qtest-i386-y += tests/i440fx-test$(EXESUF)
check-qtest-i386-y += tests/fw_cfg-test$(EXESUF)
check-qtest-i386-y += tests/drive_del-test$(EXESUF)
@@ -326,6 +328,8 @@ tests/spapr-phb-test$(EXESUF): tests/spapr-phb-test.o $(libqos-obj-y)
tests/fdc-test$(EXESUF): tests/fdc-test.o
tests/ide-test$(EXESUF): tests/ide-test.o $(libqos-pc-obj-y)
tests/ahci-test$(EXESUF): tests/ahci-test.o $(libqos-pc-obj-y)
+tests/ipmi-kcs-test$(EXESUF): tests/ipmi-kcs-test.o
+tests/ipmi-bt-test$(EXESUF): tests/ipmi-bt-test.o
tests/hd-geo-test$(EXESUF): tests/hd-geo-test.o
tests/boot-order-test$(EXESUF): tests/boot-order-test.o $(libqos-obj-y)
tests/bios-tables-test$(EXESUF): tests/bios-tables-test.o $(libqos-obj-y)
diff --git a/tests/ipmi-bt-test.c b/tests/ipmi-bt-test.c
new file mode 100644
index 0000000..9bef436
--- /dev/null
+++ b/tests/ipmi-bt-test.c
@@ -0,0 +1,441 @@
+/*
+ * IPMI BT test cases, using the external interface for checking
+ *
+ * Copyright (c) 2012 Corey Minyard <cminyard@mvista.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <sys/types.h>
+#include <stdint.h>
+#include <string.h>
+#include <stdio.h>
+
+#include <sys/socket.h>
+#include <netinet/in.h>
+#include <netinet/ip.h>
+#include <netinet/tcp.h>
+
+#include <glib.h>
+
+#include "libqtest.h"
+#include "qemu-common.h"
+
+#define IPMI_IRQ 5
+
+#define IPMI_BT_BASE 0xe4
+
+#define IPMI_BT_CTLREG_CLR_WR_PTR 0
+#define IPMI_BT_CTLREG_CLR_RD_PTR 1
+#define IPMI_BT_CTLREG_H2B_ATN 2
+#define IPMI_BT_CTLREG_B2H_ATN 3
+#define IPMI_BT_CTLREG_SMS_ATN 4
+#define IPMI_BT_CTLREG_H_BUSY 6
+#define IPMI_BT_CTLREG_B_BUSY 7
+
+#define IPMI_BT_CTLREG_GET(b) ((bt_get_ctrlreg() >> (b)) & 1)
+#define IPMI_BT_CTLREG_GET_H2B_ATN() IPMI_BT_CTLREG_GET(IPMI_BT_CTLREG_H2B_ATN)
+#define IPMI_BT_CTLREG_GET_B2H_ATN() IPMI_BT_CTLREG_GET(IPMI_BT_CTLREG_B2H_ATN)
+#define IPMI_BT_CTLREG_GET_SMS_ATN() IPMI_BT_CTLREG_GET(IPMI_BT_CTLREG_SMS_ATN)
+#define IPMI_BT_CTLREG_GET_H_BUSY() IPMI_BT_CTLREG_GET(IPMI_BT_CTLREG_H_BUSY)
+#define IPMI_BT_CTLREG_GET_B_BUSY() IPMI_BT_CTLREG_GET(IPMI_BT_CTLREG_B_BUSY)
+
+#define IPMI_BT_CTLREG_SET(b) bt_write_ctrlreg(1 << (b))
+#define IPMI_BT_CTLREG_SET_CLR_WR_PTR() IPMI_BT_CTLREG_SET( \
+ IPMI_BT_CTLREG_CLR_WR_PTR)
+#define IPMI_BT_CTLREG_SET_CLR_RD_PTR() IPMI_BT_CTLREG_SET( \
+ IPMI_BT_CTLREG_CLR_RD_PTR)
+#define IPMI_BT_CTLREG_SET_H2B_ATN() IPMI_BT_CTLREG_SET(IPMI_BT_CTLREG_H2B_ATN)
+#define IPMI_BT_CTLREG_SET_B2H_ATN() IPMI_BT_CTLREG_SET(IPMI_BT_CTLREG_B2H_ATN)
+#define IPMI_BT_CTLREG_SET_SMS_ATN() IPMI_BT_CTLREG_SET(IPMI_BT_CTLREG_SMS_ATN)
+#define IPMI_BT_CTLREG_SET_H_BUSY() IPMI_BT_CTLREG_SET(IPMI_BT_CTLREG_H_BUSY)
+
+static int bt_ints_enabled;
+
+static uint8_t bt_get_ctrlreg(void)
+{
+ return inb(IPMI_BT_BASE);
+}
+
+static void bt_write_ctrlreg(uint8_t val)
+{
+ outb(IPMI_BT_BASE, val);
+}
+
+static uint8_t bt_get_buf(void)
+{
+ return inb(IPMI_BT_BASE + 1);
+}
+
+static void bt_write_buf(uint8_t val)
+{
+ outb(IPMI_BT_BASE + 1, val);
+}
+
+static uint8_t bt_get_irqreg(void)
+{
+ return inb(IPMI_BT_BASE + 2);
+}
+
+static void bt_write_irqreg(uint8_t val)
+{
+ outb(IPMI_BT_BASE + 2, val);
+}
+
+static void bt_wait_b_busy(void)
+{
+ unsigned int count = 1000;
+ while (IPMI_BT_CTLREG_GET_B_BUSY() != 0) {
+ g_assert(--count != 0);
+ }
+}
+
+static void bt_wait_b2h_atn(void)
+{
+ unsigned int count = 1000;
+ while (IPMI_BT_CTLREG_GET_B2H_ATN() == 0) {
+ g_assert(--count != 0);
+ }
+}
+
+
+static int emu_lfd;
+static int emu_fd;
+static in_port_t emu_port;
+static uint8_t inbuf[100];
+static unsigned int inbuf_len;
+static unsigned int inbuf_pos;
+static int last_was_aa;
+
+static void read_emu_data(void)
+{
+ fd_set readfds;
+ int rv;
+ struct timeval tv;
+
+ FD_ZERO(&readfds);
+ FD_SET(emu_fd, &readfds);
+ tv.tv_sec = 10;
+ tv.tv_usec = 0;
+ rv = select(emu_fd + 1, &readfds, NULL, NULL, &tv);
+ if (rv == -1) {
+ perror("select");
+ }
+ g_assert(rv == 1);
+ rv = read(emu_fd, inbuf, sizeof(inbuf));
+ if (rv == -1) {
+ perror("read");
+ }
+ g_assert(rv > 0);
+ inbuf_len = rv;
+ inbuf_pos = 0;
+}
+
+static void write_emu_msg(uint8_t *msg, unsigned int len)
+{
+ int rv;
+
+#ifdef DEBUG_TEST
+ {
+ unsigned int i;
+ printf("sending:");
+ for (i = 0; i < len; i++) {
+ printf(" %2.2x", msg[i]);
+ }
+ printf("\n");
+ }
+#endif
+ rv = write(emu_fd, msg, len);
+ g_assert(rv == len);
+}
+
+static void get_emu_msg(uint8_t *msg, unsigned int *len)
+{
+ unsigned int outpos = 0;
+
+ for (;;) {
+ while (inbuf_pos < inbuf_len) {
+ uint8_t ch = inbuf[inbuf_pos++];
+
+ g_assert(outpos < *len);
+ if (last_was_aa) {
+ assert(ch & 0x10);
+ msg[outpos++] = ch & ~0x10;
+ last_was_aa = 0;
+ } else if (ch == 0xaa) {
+ last_was_aa = 1;
+ } else {
+ msg[outpos++] = ch;
+ if ((ch == 0xa0) || (ch == 0xa1)) {
+ /* Message complete */
+ *len = outpos;
+ goto done;
+ }
+ }
+ }
+ read_emu_data();
+ }
+ done:
+#ifdef DEBUG_TEST
+ {
+ unsigned int i;
+ printf("Msg:");
+ for (i = 0; i < outpos; i++) {
+ printf(" %2.2x", msg[i]);
+ }
+ printf("\n");
+ }
+#endif
+ return;
+}
+
+static uint8_t
+ipmb_checksum(const unsigned char *data, int size, unsigned char start)
+{
+ unsigned char csum = start;
+
+ for (; size > 0; size--, data++) {
+ csum += *data;
+ }
+ return csum;
+}
+
+static uint8_t get_dev_id_cmd[] = { 0x18, 0x01 };
+static uint8_t get_dev_id_rsp[] = { 0x1c, 0x01, 0x00, 0x20, 0x00, 0x00, 0x00,
+ 0x02, 0x09, 0x00, 0x00, 0x00, 0x00, 0x00 };
+
+static uint8_t set_bmc_globals_cmd[] = { 0x18, 0x2e, 0x0f };
+static uint8_t set_bmc_globals_rsp[] = { 0x1c, 0x2e, 0x00 };
+static uint8_t enable_irq_cmd[] = { 0x05, 0xa1 };
+
+static void emu_msg_handler(void)
+{
+ uint8_t msg[100];
+ unsigned int msg_len = sizeof(msg);
+
+ get_emu_msg(msg, &msg_len);
+ g_assert(msg_len >= 5);
+ g_assert(msg[msg_len - 1] == 0xa0);
+ msg_len--;
+ g_assert(ipmb_checksum(msg, msg_len, 0) == 0);
+ msg_len--;
+ if ((msg[1] == get_dev_id_cmd[0]) && (msg[2] == get_dev_id_cmd[1])) {
+ memcpy(msg + 1, get_dev_id_rsp, sizeof(get_dev_id_rsp));
+ msg_len = sizeof(get_dev_id_rsp) + 1;
+ msg[msg_len] = -ipmb_checksum(msg, msg_len, 0);
+ msg_len++;
+ msg[msg_len++] = 0xa0;
+ write_emu_msg(msg, msg_len);
+ } else if ((msg[1] == set_bmc_globals_cmd[0]) &&
+ (msg[2] == set_bmc_globals_cmd[1])) {
+ memcpy(msg + 1, set_bmc_globals_rsp, sizeof(set_bmc_globals_rsp));
+ msg_len = sizeof(set_bmc_globals_rsp) + 1;
+ msg[msg_len] = -ipmb_checksum(msg, msg_len, 0);
+ msg_len++;
+ msg[msg_len++] = 0xa0;
+ write_emu_msg(msg, msg_len);
+ write_emu_msg(enable_irq_cmd, sizeof(enable_irq_cmd));
+ } else {
+ g_assert(0);
+ }
+}
+
+static void bt_cmd(uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len)
+{
+ unsigned int i, len, j = 0;
+ uint8_t seq = 5;
+
+ /* Should be idle */
+ g_assert(bt_get_ctrlreg() == 0);
+
+ bt_wait_b_busy();
+ IPMI_BT_CTLREG_SET_CLR_WR_PTR();
+ bt_write_buf(cmd_len + 1);
+ bt_write_buf(cmd[0]);
+ bt_write_buf(seq);
+ for (i = 1; i < cmd_len; i++) {
+ bt_write_buf(cmd[i]);
+ }
+ IPMI_BT_CTLREG_SET_H2B_ATN();
+
+ emu_msg_handler(); /* We should get a message on the socket here. */
+
+ bt_wait_b2h_atn();
+ if (bt_ints_enabled) {
+ g_assert((bt_get_irqreg() & 0x02) == 0x02);
+ g_assert(get_irq(IPMI_IRQ));
+ bt_write_irqreg(0x03);
+ } else {
+ g_assert(!get_irq(IPMI_IRQ));
+ }
+ IPMI_BT_CTLREG_SET_H_BUSY();
+ IPMI_BT_CTLREG_SET_B2H_ATN();
+ IPMI_BT_CTLREG_SET_CLR_RD_PTR();
+ len = bt_get_buf();
+ g_assert(len >= 4);
+ rsp[0] = bt_get_buf();
+ assert(bt_get_buf() == seq);
+ len--;
+ for (j = 1; j < len; j++) {
+ rsp[j] = bt_get_buf();
+ }
+ IPMI_BT_CTLREG_SET_H_BUSY();
+ *rsp_len = j;
+}
+
+
+/*
+ * We should get a connect request and a short message with capabilities.
+ */
+static void test_connect(void)
+{
+ fd_set readfds;
+ int rv;
+ int val;
+ struct timeval tv;
+ uint8_t msg[100];
+ unsigned int msglen;
+ static uint8_t exp1[] = { 0xff, 0x01, 0xa1 }; /* A protocol version */
+ static uint8_t exp2[] = { 0x08, 0x1f, 0xa1 }; /* A capabilities cmd */
+ static uint8_t exp3[] = { 0x04, 0xa1 }; /* A reset is reported */
+
+ FD_ZERO(&readfds);
+ FD_SET(emu_lfd, &readfds);
+ tv.tv_sec = 10;
+ tv.tv_usec = 0;
+ rv = select(emu_lfd + 1, &readfds, NULL, NULL, &tv);
+ g_assert(rv == 1);
+ emu_fd = accept(emu_lfd, NULL, 0);
+ if (emu_fd < 0) {
+ perror("accept");
+ }
+ g_assert(emu_fd >= 0);
+
+ val = 1;
+ rv = setsockopt(emu_fd, IPPROTO_TCP, TCP_NODELAY, &val, sizeof(val));
+ g_assert(rv != -1);
+
+ /* Report our version */
+ write_emu_msg(exp1, sizeof(exp1));
+
+ /* Validate that we get the info we expect. */
+ msglen = sizeof(msg);
+ get_emu_msg(msg, &msglen);
+ g_assert(msglen == sizeof(exp1));
+ g_assert(memcmp(msg, exp1, msglen) == 0);
+ msglen = sizeof(msg);
+ get_emu_msg(msg, &msglen);
+ g_assert(msglen == sizeof(exp2));
+ g_assert(memcmp(msg, exp2, msglen) == 0);
+ msglen = sizeof(msg);
+ get_emu_msg(msg, &msglen);
+ g_assert(msglen == sizeof(exp3));
+ g_assert(memcmp(msg, exp3, msglen) == 0);
+}
+
+/*
+ * Send a get_device_id to do a basic test.
+ */
+static void test_bt_base(void)
+{
+ uint8_t rsp[20];
+ unsigned int rsplen = sizeof(rsp);
+
+ bt_cmd(get_dev_id_cmd, sizeof(get_dev_id_cmd), rsp, &rsplen);
+ g_assert(rsplen == sizeof(get_dev_id_rsp));
+ g_assert(memcmp(get_dev_id_rsp, rsp, rsplen) == 0);
+}
+
+/*
+ * Enable IRQs for the interface.
+ */
+static void test_enable_irq(void)
+{
+ uint8_t rsp[20];
+ unsigned int rsplen = sizeof(rsp);
+
+ bt_cmd(set_bmc_globals_cmd, sizeof(set_bmc_globals_cmd), rsp, &rsplen);
+ g_assert(rsplen == sizeof(set_bmc_globals_rsp));
+ g_assert(memcmp(set_bmc_globals_rsp, rsp, rsplen) == 0);
+ bt_write_irqreg(0x01);
+ bt_ints_enabled = 1;
+}
+
+/*
+ * Create a local TCP socket with any port, then save off the port we got.
+ */
+static void open_socket(void)
+{
+ struct sockaddr_in myaddr;
+ socklen_t addrlen;
+
+ myaddr.sin_family = AF_INET;
+ myaddr.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
+ myaddr.sin_port = 0;
+ emu_lfd = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);
+ if (emu_lfd == -1) {
+ perror("socket");
+ exit(1);
+ }
+ if (bind(emu_lfd, (struct sockaddr *) &myaddr, sizeof(myaddr)) == -1) {
+ perror("bind");
+ exit(1);
+ }
+ addrlen = sizeof(myaddr);
+ if (getsockname(emu_lfd, (struct sockaddr *) &myaddr , &addrlen) == -1) {
+ perror("getsockname");
+ exit(1);
+ }
+ emu_port = ntohs(myaddr.sin_port);
+ assert(listen(emu_lfd, 1) != -1);
+}
+
+int main(int argc, char **argv)
+{
+ const char *arch = qtest_get_arch();
+ char *cmdline;
+ int ret;
+
+ /* Check architecture */
+ if (strcmp(arch, "i386") && strcmp(arch, "x86_64")) {
+ g_test_message("Skipping test for non-x86\n");
+ return 0;
+ }
+
+ open_socket();
+
+ /* Run the tests */
+ g_test_init(&argc, &argv, NULL);
+
+ cmdline = g_strdup_printf("-vnc none"
+ " -chardev socket,id=ipmi0,host=localhost,port=%d,reconnect=10"
+ " -device ipmi-bmc-extern,chardev=ipmi0,id=bmc0"
+ " -device isa-ipmi-bt,bmc=bmc0", emu_port);
+ qtest_start(cmdline);
+ qtest_irq_intercept_in(global_qtest, "ioapic");
+ qtest_add_func("/ipmi/extern/connect", test_connect);
+ qtest_add_func("/ipmi/extern/bt_base", test_bt_base);
+ qtest_add_func("/ipmi/extern/bt_enable_irq", test_enable_irq);
+ qtest_add_func("/ipmi/extern/bt_base_irq", test_bt_base);
+ ret = g_test_run();
+ qtest_quit(global_qtest);
+
+ return ret;
+}
diff --git a/tests/ipmi-kcs-test.c b/tests/ipmi-kcs-test.c
new file mode 100644
index 0000000..564c470
--- /dev/null
+++ b/tests/ipmi-kcs-test.c
@@ -0,0 +1,295 @@
+/*
+ * IPMI KCS test cases, using the local interface.
+ *
+ * Copyright (c) 2012 Corey Minyard <cminyard@mvista.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <stdint.h>
+#include <string.h>
+#include <stdio.h>
+
+#include <glib.h>
+
+#include "libqtest.h"
+
+#define IPMI_IRQ 5
+
+#define IPMI_KCS_BASE 0xca2
+
+#define IPMI_KCS_STATUS_ABORT 0x60
+#define IPMI_KCS_CMD_WRITE_START 0x61
+#define IPMI_KCS_CMD_WRITE_END 0x62
+#define IPMI_KCS_CMD_READ 0x68
+
+#define IPMI_KCS_ABORTED_BY_CMD 0x01
+
+#define IPMI_KCS_CMDREG_GET_STATE() ((kcs_get_cmdreg() >> 6) & 3)
+#define IPMI_KCS_STATE_IDLE 0
+#define IPMI_KCS_STATE_READ 1
+#define IPMI_KCS_STATE_WRITE 2
+#define IPMI_KCS_STATE_ERROR 3
+#define IPMI_KCS_CMDREG_GET_CD() ((kcs_get_cmdreg() >> 3) & 1)
+#define IPMI_KCS_CMDREG_GET_ATN() ((kcs_get_cmdreg() >> 2) & 1)
+#define IPMI_KCS_CMDREG_GET_IBF() ((kcs_get_cmdreg() >> 1) & 1)
+#define IPMI_KCS_CMDREG_GET_OBF() ((kcs_get_cmdreg() >> 0) & 1)
+
+static int kcs_ints_enabled;
+
+static uint8_t kcs_get_cmdreg(void)
+{
+ return inb(IPMI_KCS_BASE + 1);
+}
+
+static void kcs_write_cmdreg(uint8_t val)
+{
+ outb(IPMI_KCS_BASE + 1, val);
+}
+
+static uint8_t kcs_get_datareg(void)
+{
+ return inb(IPMI_KCS_BASE);
+}
+
+static void kcs_write_datareg(uint8_t val)
+{
+ outb(IPMI_KCS_BASE, val);
+}
+
+static void kcs_wait_ibf(void)
+{
+ unsigned int count = 1000;
+ while (IPMI_KCS_CMDREG_GET_IBF() != 0) {
+ g_assert(--count != 0);
+ }
+}
+
+static void kcs_wait_obf(void)
+{
+ unsigned int count = 1000;
+ while (IPMI_KCS_CMDREG_GET_OBF() == 0) {
+ g_assert(--count != 0);
+ }
+}
+
+static void kcs_clear_obf(void)
+{
+ if (kcs_ints_enabled) {
+ g_assert(get_irq(IPMI_IRQ));
+ } else {
+ g_assert(!get_irq(IPMI_IRQ));
+ }
+ g_assert(IPMI_KCS_CMDREG_GET_OBF() == 1);
+ kcs_get_datareg();
+ g_assert(IPMI_KCS_CMDREG_GET_OBF() == 0);
+ g_assert(!get_irq(IPMI_IRQ));
+}
+
+static void kcs_check_state(uint8_t state)
+{
+ g_assert(IPMI_KCS_CMDREG_GET_STATE() == state);
+}
+
+static void kcs_cmd(uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len)
+{
+ unsigned int i, j = 0;
+
+ /* Should be idle */
+ g_assert(kcs_get_cmdreg() == 0);
+
+ kcs_write_cmdreg(IPMI_KCS_CMD_WRITE_START);
+ kcs_wait_ibf();
+ kcs_check_state(IPMI_KCS_STATE_WRITE);
+ kcs_clear_obf();
+ for (i = 0; i < cmd_len; i++) {
+ kcs_write_datareg(cmd[i]);
+ kcs_wait_ibf();
+ kcs_check_state(IPMI_KCS_STATE_WRITE);
+ kcs_clear_obf();
+ }
+ kcs_write_cmdreg(IPMI_KCS_CMD_WRITE_END);
+ kcs_wait_ibf();
+ kcs_check_state(IPMI_KCS_STATE_WRITE);
+ kcs_clear_obf();
+ kcs_write_datareg(0);
+ next_read_byte:
+ kcs_wait_ibf();
+ switch (IPMI_KCS_CMDREG_GET_STATE()) {
+ case IPMI_KCS_STATE_READ:
+ kcs_wait_obf();
+ g_assert(j < *rsp_len);
+ rsp[j++] = kcs_get_datareg();
+ kcs_write_datareg(IPMI_KCS_CMD_READ);
+ goto next_read_byte;
+ break;
+
+ case IPMI_KCS_STATE_IDLE:
+ kcs_wait_obf();
+ kcs_get_datareg();
+ break;
+
+ default:
+ g_assert(0);
+ }
+ *rsp_len = j;
+}
+
+static void kcs_abort(uint8_t *cmd, unsigned int cmd_len,
+ uint8_t *rsp, unsigned int *rsp_len)
+{
+ unsigned int i, j = 0;
+ unsigned int retries = 4;
+
+ /* Should be idle */
+ g_assert(kcs_get_cmdreg() == 0);
+
+ kcs_write_cmdreg(IPMI_KCS_CMD_WRITE_START);
+ kcs_wait_ibf();
+ kcs_check_state(IPMI_KCS_STATE_WRITE);
+ kcs_clear_obf();
+ for (i = 0; i < cmd_len; i++) {
+ kcs_write_datareg(cmd[i]);
+ kcs_wait_ibf();
+ kcs_check_state(IPMI_KCS_STATE_WRITE);
+ kcs_clear_obf();
+ }
+ kcs_write_cmdreg(IPMI_KCS_CMD_WRITE_END);
+ kcs_wait_ibf();
+ kcs_check_state(IPMI_KCS_STATE_WRITE);
+ kcs_clear_obf();
+ kcs_write_datareg(0);
+ kcs_wait_ibf();
+ switch (IPMI_KCS_CMDREG_GET_STATE()) {
+ case IPMI_KCS_STATE_READ:
+ kcs_wait_obf();
+ g_assert(j < *rsp_len);
+ rsp[j++] = kcs_get_datareg();
+ kcs_write_datareg(IPMI_KCS_CMD_READ);
+ break;
+
+ default:
+ g_assert(0);
+ }
+
+ /* Start the abort here */
+ retry_abort:
+ g_assert(retries > 0);
+
+ kcs_wait_ibf();
+ kcs_write_cmdreg(IPMI_KCS_STATUS_ABORT);
+ kcs_wait_ibf();
+ kcs_clear_obf();
+ kcs_write_datareg(0);
+ kcs_wait_ibf();
+ if (IPMI_KCS_CMDREG_GET_STATE() != IPMI_KCS_STATE_READ) {
+ retries--;
+ goto retry_abort;
+ }
+ kcs_wait_obf();
+ rsp[0] = kcs_get_datareg();
+ kcs_write_datareg(IPMI_KCS_CMD_READ);
+ kcs_wait_ibf();
+ if (IPMI_KCS_CMDREG_GET_STATE() != IPMI_KCS_STATE_IDLE) {
+ retries--;
+ goto retry_abort;
+ }
+ kcs_wait_obf();
+ kcs_clear_obf();
+
+ *rsp_len = j;
+}
+
+
+static uint8_t get_dev_id_cmd[] = { 0x18, 0x01 };
+static uint8_t get_dev_id_rsp[] = { 0x1c, 0x01, 0x00, 0x20, 0x00, 0x00, 0x00,
+ 0x02, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00 };
+
+/*
+ * Send a get_device_id to do a basic test.
+ */
+static void test_kcs_base(void)
+{
+ uint8_t rsp[20];
+ unsigned int rsplen = sizeof(rsp);
+
+ kcs_cmd(get_dev_id_cmd, sizeof(get_dev_id_cmd), rsp, &rsplen);
+ g_assert(rsplen == sizeof(get_dev_id_rsp));
+ g_assert(memcmp(get_dev_id_rsp, rsp, rsplen) == 0);
+}
+
+/*
+ * Abort a kcs operation while reading
+ */
+static void test_kcs_abort(void)
+{
+ uint8_t rsp[20];
+ unsigned int rsplen = sizeof(rsp);
+
+ kcs_abort(get_dev_id_cmd, sizeof(get_dev_id_cmd), rsp, &rsplen);
+ g_assert(rsp[0] == IPMI_KCS_ABORTED_BY_CMD);
+}
+
+static uint8_t set_bmc_globals_cmd[] = { 0x18, 0x2e, 0x0f };
+static uint8_t set_bmc_globals_rsp[] = { 0x1c, 0x2e, 0x00 };
+
+/*
+ * Enable interrupts
+ */
+static void test_enable_irq(void)
+{
+ uint8_t rsp[20];
+ unsigned int rsplen = sizeof(rsp);
+
+ kcs_cmd(set_bmc_globals_cmd, sizeof(set_bmc_globals_cmd), rsp, &rsplen);
+ g_assert(rsplen == sizeof(set_bmc_globals_rsp));
+ g_assert(memcmp(set_bmc_globals_rsp, rsp, rsplen) == 0);
+ kcs_ints_enabled = 1;
+}
+
+int main(int argc, char **argv)
+{
+ const char *arch = qtest_get_arch();
+ char *cmdline;
+ int ret;
+
+ /* Check architecture */
+ if (strcmp(arch, "i386") && strcmp(arch, "x86_64")) {
+ g_test_message("Skipping test for non-x86\n");
+ return 0;
+ }
+
+ /* Run the tests */
+ g_test_init(&argc, &argv, NULL);
+
+ cmdline = g_strdup_printf("-vnc none -device ipmi-bmc-sim,id=bmc0"
+ " -device isa-ipmi-kcs,bmc=bmc0");
+ qtest_start(cmdline);
+ qtest_irq_intercept_in(global_qtest, "ioapic");
+ qtest_add_func("/ipmi/local/kcs_base", test_kcs_base);
+ qtest_add_func("/ipmi/local/kcs_abort", test_kcs_abort);
+ qtest_add_func("/ipmi/local/kcs_enable_irq", test_enable_irq);
+ qtest_add_func("/ipmi/local/kcs_base_irq", test_kcs_base);
+ qtest_add_func("/ipmi/local/kcs_abort_irq", test_kcs_abort);
+ ret = g_test_run();
+ qtest_quit(global_qtest);
+
+ return ret;
+}
--
1.8.3.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [Qemu-devel] [PATCH v3 07/16] ipmi: Add documentation
2015-06-09 1:11 [Qemu-devel] [PATCH v3 00/16] Add an IPMI device to QEMU minyard
` (5 preceding siblings ...)
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 06/16] ipmi: Add tests minyard
@ 2015-06-09 1:12 ` minyard
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 08/16] ipmi: Add migration capability to the IPMI devices minyard
` (11 subsequent siblings)
18 siblings, 0 replies; 31+ messages in thread
From: minyard @ 2015-06-09 1:12 UTC (permalink / raw)
To: qemu-devel; +Cc: Corey Minyard
From: Corey Minyard <cminyard@mvista.com>
Add some basic documentation for the IPMI device.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
---
qemu-options.hx | 52 ++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 52 insertions(+)
diff --git a/qemu-options.hx b/qemu-options.hx
index 319d971..f2bc344 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -373,6 +373,58 @@ Add device @var{driver}. @var{prop}=@var{value} sets driver
properties. Valid properties depend on the driver. To get help on
possible drivers and properties, use @code{-device help} and
@code{-device @var{driver},help}.
+
+Some drivers are:
+@item -device ipmi-bmc-sim,id=@var{id}[,slave_addr=@var{val}]
+
+Add an IPMI BMC. This is a simulation of a hardware management
+interface processor that normally sits on a system. It provides
+a watchdog and the ability to reset and power control the system.
+You need to connect this to an IPMI interface to make it useful
+
+The IPMI slave address to use for the BMC. The default is 0x20.
+This address is the BMC's address on the I2C network of management
+controllers. If you don't know what this means, it is safe to ignore
+it.
+
+@item -device ipmi-bmc-extern,id=@var{id},chardev=@var{id}[,slave_addr=@var{val}]
+
+Add a connection to an external IPMI BMC simulator. Instead of
+locally emulating the BMC like the above item, instead connect
+to an external entity that provides the IPMI services.
+
+A connection is made to an external BMC simulator. If you do this, it
+is strongly recommended that you use the "reconnect=" chardev option
+to reconnect to the simulator if the connection is lost. Note that if
+this is not used carefully, it can be a security issue, as the
+interface has the ability to send resets, NMIs, and power off the VM.
+It's best if QEMU makes a connection to an external simulator running
+on a secure port on localhost, so neither the simulator nor QEMU is
+exposed to any outside network.
+
+See the "lanserv/README.vm" file in the OpenIPMI library for more
+details on the external interface.
+
+@item -device isa-ipmi-kcs,bmc=@var{id}[,ioport=@var{val}][,irq=@var{val}]
+
+Add a KCS IPMI interafce on the ISA bus. This also adds a
+corresponding ACPI and SMBIOS entries, if appropriate.
+
+@table @option
+@item bmc=@var{id}
+The BMC to connect to, one of ipmi-bmc-sim or ipmi-bmc-extern above.
+@item ioport=@var{val}
+Define the I/O address of the interface. The default is 0xca0 for KCS.
+@item irq=@var{val}
+Define the interrupt to use. The default is 5. To disable interrupts,
+set this to 0.
+@end table
+
+@item -device isa-ipmi-bt,bmc=@var{id}[,ioport=@var{val}][,irq=@var{val}]
+
+Like the KCS interface, but defines a BT interface. The default port is
+0xe4 and the default interrupt is 5.
+
ETEXI
DEF("name", HAS_ARG, QEMU_OPTION_name,
--
1.8.3.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [Qemu-devel] [PATCH v3 08/16] ipmi: Add migration capability to the IPMI devices.
2015-06-09 1:11 [Qemu-devel] [PATCH v3 00/16] Add an IPMI device to QEMU minyard
` (6 preceding siblings ...)
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 07/16] ipmi: Add documentation minyard
@ 2015-06-09 1:12 ` minyard
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 09/16] ipmi: Add a firmware configuration repository minyard
` (10 subsequent siblings)
18 siblings, 0 replies; 31+ messages in thread
From: minyard @ 2015-06-09 1:12 UTC (permalink / raw)
To: qemu-devel; +Cc: Corey Minyard
From: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
---
hw/ipmi/ipmi_bmc_extern.c | 34 ++++++++++++++++++++++++++++++++++
hw/ipmi/ipmi_bmc_sim.c | 30 ++++++++++++++++++++++++++++++
hw/ipmi/isa_ipmi_bt.c | 24 ++++++++++++++++++++++++
hw/ipmi/isa_ipmi_kcs.c | 26 ++++++++++++++++++++++++++
4 files changed, 114 insertions(+)
diff --git a/hw/ipmi/ipmi_bmc_extern.c b/hw/ipmi/ipmi_bmc_extern.c
index d4669f0..05b9121 100644
--- a/hw/ipmi/ipmi_bmc_extern.c
+++ b/hw/ipmi/ipmi_bmc_extern.c
@@ -439,11 +439,45 @@ static void ipmi_bmc_extern_realize(DeviceState *dev, Error **errp)
qemu_chr_add_handlers(ibe->chr, can_receive, receive, chr_event, ibe);
}
+static int ipmi_bmc_extern_post_migrate(void *opaque, int version_id)
+{
+ IPMIBmcExtern *ibe = opaque;
+
+ /*
+ * We don't directly restore waiting_rsp, Instead, we return an
+ * error on the interface if a response was being waited for.
+ */
+ if (ibe->waiting_rsp) {
+ IPMIInterface *ii = ibe->parent.intf;
+ IPMIInterfaceClass *iic = IPMI_INTERFACE_GET_CLASS(ii);
+
+ ibe->waiting_rsp = false;
+ ibe->inbuf[1] = ibe->outbuf[1] | 0x04;
+ ibe->inbuf[2] = ibe->outbuf[2];
+ ibe->inbuf[3] = IPMI_CC_BMC_INIT_IN_PROGRESS;
+ iic->handle_rsp(ii, ibe->outbuf[0], ibe->inbuf + 1, 3);
+ }
+ return 0;
+}
+
+static const VMStateDescription vmstate_ipmi_bmc_extern = {
+ .name = TYPE_IPMI_BMC_EXTERN,
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .post_load = ipmi_bmc_extern_post_migrate,
+ .fields = (VMStateField[]) {
+ VMSTATE_BOOL(send_reset, IPMIBmcExtern),
+ VMSTATE_BOOL(waiting_rsp, IPMIBmcExtern),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
static void ipmi_bmc_extern_init(Object *obj)
{
IPMIBmcExtern *ibe = IPMI_BMC_EXTERN(obj);
ibe->extern_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, extern_timeout, ibe);
+ vmstate_register(NULL, 0, &vmstate_ipmi_bmc_extern, ibe);
}
static Property ipmi_bmc_extern_properties[] = {
diff --git a/hw/ipmi/ipmi_bmc_sim.c b/hw/ipmi/ipmi_bmc_sim.c
index d246029..c81a19d 100644
--- a/hw/ipmi/ipmi_bmc_sim.c
+++ b/hw/ipmi/ipmi_bmc_sim.c
@@ -1658,6 +1658,34 @@ static const uint8_t init_sdrs[] = {
0xff, 0xff, 0x00, 0x00, 0x00
};
+static const VMStateDescription vmstate_ipmi_sim = {
+ .name = TYPE_IPMI_BMC_SIMULATOR,
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT8(bmc_global_enables, IPMIBmcSim),
+ VMSTATE_UINT8(msg_flags, IPMIBmcSim),
+ VMSTATE_BOOL(watchdog_initialized, IPMIBmcSim),
+ VMSTATE_UINT8(watchdog_use, IPMIBmcSim),
+ VMSTATE_UINT8(watchdog_action, IPMIBmcSim),
+ VMSTATE_UINT8(watchdog_pretimeout, IPMIBmcSim),
+ VMSTATE_BOOL(watchdog_expired, IPMIBmcSim),
+ VMSTATE_UINT16(watchdog_timeout, IPMIBmcSim),
+ VMSTATE_BOOL(watchdog_running, IPMIBmcSim),
+ VMSTATE_BOOL(watchdog_preaction_ran, IPMIBmcSim),
+ VMSTATE_INT64(watchdog_expiry, IPMIBmcSim),
+ VMSTATE_UINT8_ARRAY(evtbuf, IPMIBmcSim, 16),
+ VMSTATE_UINT8(sensors[IPMI_WATCHDOG_SENSOR].status, IPMIBmcSim),
+ VMSTATE_UINT8(sensors[IPMI_WATCHDOG_SENSOR].reading, IPMIBmcSim),
+ VMSTATE_UINT16(sensors[IPMI_WATCHDOG_SENSOR].states, IPMIBmcSim),
+ VMSTATE_UINT16(sensors[IPMI_WATCHDOG_SENSOR].assert_states, IPMIBmcSim),
+ VMSTATE_UINT16(sensors[IPMI_WATCHDOG_SENSOR].deassert_states,
+ IPMIBmcSim),
+ VMSTATE_UINT16(sensors[IPMI_WATCHDOG_SENSOR].assert_enable, IPMIBmcSim),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
static void ipmi_sim_init(Object *obj)
{
IPMIBmc *b = IPMI_BMC(obj);
@@ -1706,6 +1734,8 @@ static void ipmi_sim_init(Object *obj)
register_cmds(ibs);
ibs->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, ipmi_timeout, ibs);
+
+ vmstate_register(NULL, 0, &vmstate_ipmi_sim, ibs);
}
static void ipmi_sim_class_init(ObjectClass *oc, void *data)
diff --git a/hw/ipmi/isa_ipmi_bt.c b/hw/ipmi/isa_ipmi_bt.c
index 70e2c0d..03eb9cc 100644
--- a/hw/ipmi/isa_ipmi_bt.c
+++ b/hw/ipmi/isa_ipmi_bt.c
@@ -437,11 +437,35 @@ static void isa_ipmi_bt_realize(DeviceState *dev, Error **errp)
isa_register_ioport(isadev, &iib->bt.io, iib->bt.io_base);
}
+static const VMStateDescription vmstate_ISAIPMIBTDevice = {
+ .name = TYPE_IPMI_INTERFACE,
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_BOOL(bt.obf_irq_set, ISAIPMIBTDevice),
+ VMSTATE_BOOL(bt.atn_irq_set, ISAIPMIBTDevice),
+ VMSTATE_BOOL(bt.use_irq, ISAIPMIBTDevice),
+ VMSTATE_BOOL(bt.irqs_enabled, ISAIPMIBTDevice),
+ VMSTATE_UINT32(bt.outpos, ISAIPMIBTDevice),
+ VMSTATE_VBUFFER_UINT32(bt.outmsg, ISAIPMIBTDevice, 1, NULL, 0,
+ bt.outlen),
+ VMSTATE_VBUFFER_UINT32(bt.inmsg, ISAIPMIBTDevice, 1, NULL, 0,
+ bt.inlen),
+ VMSTATE_UINT8(bt.control_reg, ISAIPMIBTDevice),
+ VMSTATE_UINT8(bt.mask_reg, ISAIPMIBTDevice),
+ VMSTATE_UINT8(bt.waiting_rsp, ISAIPMIBTDevice),
+ VMSTATE_UINT8(bt.waiting_seq, ISAIPMIBTDevice),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
static void isa_ipmi_bt_init(Object *obj)
{
ISAIPMIBTDevice *iib = ISA_IPMI_BT(obj);
ipmi_bmc_find_and_link(obj, (Object **) &iib->bt.bmc);
+
+ vmstate_register(NULL, 0, &vmstate_ISAIPMIBTDevice, iib);
}
static void *isa_ipmi_bt_get_backend_data(IPMIInterface *ii)
diff --git a/hw/ipmi/isa_ipmi_kcs.c b/hw/ipmi/isa_ipmi_kcs.c
index 750a725..b588711 100644
--- a/hw/ipmi/isa_ipmi_kcs.c
+++ b/hw/ipmi/isa_ipmi_kcs.c
@@ -400,11 +400,37 @@ static void ipmi_isa_realize(DeviceState *dev, Error **errp)
isa_register_ioport(isadev, &iik->kcs.io, iik->kcs.io_base);
}
+const VMStateDescription vmstate_ISAIPMIKCSDevice = {
+ .name = TYPE_IPMI_INTERFACE,
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_BOOL(kcs.obf_irq_set, ISAIPMIKCSDevice),
+ VMSTATE_BOOL(kcs.atn_irq_set, ISAIPMIKCSDevice),
+ VMSTATE_BOOL(kcs.use_irq, ISAIPMIKCSDevice),
+ VMSTATE_BOOL(kcs.irqs_enabled, ISAIPMIKCSDevice),
+ VMSTATE_UINT32(kcs.outpos, ISAIPMIKCSDevice),
+ VMSTATE_VBUFFER_UINT32(kcs.outmsg, ISAIPMIKCSDevice, 1, NULL, 0,
+ kcs.outlen),
+ VMSTATE_VBUFFER_UINT32(kcs.inmsg, ISAIPMIKCSDevice, 1, NULL, 0,
+ kcs.inlen),
+ VMSTATE_BOOL(kcs.write_end, ISAIPMIKCSDevice),
+ VMSTATE_UINT8(kcs.status_reg, ISAIPMIKCSDevice),
+ VMSTATE_UINT8(kcs.data_out_reg, ISAIPMIKCSDevice),
+ VMSTATE_INT16(kcs.data_in_reg, ISAIPMIKCSDevice),
+ VMSTATE_INT16(kcs.cmd_reg, ISAIPMIKCSDevice),
+ VMSTATE_UINT8(kcs.waiting_rsp, ISAIPMIKCSDevice),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
static void isa_ipmi_kcs_init(Object *obj)
{
ISAIPMIKCSDevice *iik = ISA_IPMI_KCS(obj);
ipmi_bmc_find_and_link(obj, (Object **) &iik->kcs.bmc);
+
+ vmstate_register(NULL, 0, &vmstate_ISAIPMIKCSDevice, iik);
}
static void *isa_ipmi_kcs_get_backend_data(IPMIInterface *ii)
--
1.8.3.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [Qemu-devel] [PATCH v3 09/16] ipmi: Add a firmware configuration repository
2015-06-09 1:11 [Qemu-devel] [PATCH v3 00/16] Add an IPMI device to QEMU minyard
` (7 preceding siblings ...)
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 08/16] ipmi: Add migration capability to the IPMI devices minyard
@ 2015-06-09 1:12 ` minyard
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 10/16] ipmi: Add firmware registration to the ISA interface minyard
` (9 subsequent siblings)
18 siblings, 0 replies; 31+ messages in thread
From: minyard @ 2015-06-09 1:12 UTC (permalink / raw)
To: qemu-devel; +Cc: Corey Minyard
From: Corey Minyard <cminyard@mvista.com>
Add a way for IPMI devices to register their firmware information
with the IPMI subsystem so that various firmware entities can pull
that information later for adding to firmware tables.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
---
hw/ipmi/ipmi.c | 25 +++++++++++++++++++++++++
include/hw/ipmi/ipmi.h | 35 +++++++++++++++++++++++++++++++++++
2 files changed, 60 insertions(+)
diff --git a/hw/ipmi/ipmi.c b/hw/ipmi/ipmi.c
index 7d17469..ced588d 100644
--- a/hw/ipmi/ipmi.c
+++ b/hw/ipmi/ipmi.c
@@ -123,3 +123,28 @@ static void ipmi_register_types(void)
}
type_init(ipmi_register_types)
+
+struct fw_entry_handlers {
+ IPMIFwHandler handler;
+ void *opaque;
+ QSLIST_ENTRY(fw_entry_handlers) next;
+};
+static QSLIST_HEAD(, fw_entry_handlers) fw_entries;
+
+void ipmi_add_fwinfo(IPMIFwInfo *info)
+{
+ struct fw_entry_handlers *e;
+
+ QSLIST_FOREACH(e, &fw_entries, next) {
+ e->handler(info, e->opaque);
+ }
+}
+
+void ipmi_register_fwinfo_handler(IPMIFwHandler handler, void *opaque)
+{
+ struct fw_entry_handlers *e = g_malloc(sizeof(*e));
+
+ e->handler = handler;
+ e->opaque = opaque;
+ QSLIST_INSERT_HEAD(&fw_entries, e, next);
+}
diff --git a/include/hw/ipmi/ipmi.h b/include/hw/ipmi/ipmi.h
index e4f7738..9bd9c9d 100644
--- a/include/hw/ipmi/ipmi.h
+++ b/include/hw/ipmi/ipmi.h
@@ -168,6 +168,41 @@ typedef struct IPMIBmcClass {
*/
void ipmi_bmc_find_and_link(Object *obj, Object **bmc);
+/*
+ * Used for transferring information to interfaces that add
+ * entries to firmware tables.
+ */
+typedef struct IPMIFwInfo {
+ const char *interface_name;
+ int interface_type;
+ uint8_t ipmi_spec_major_revision;
+ uint8_t ipmi_spec_minor_revision;
+ uint8_t i2c_slave_address;
+
+ uint64_t base_address;
+ uint64_t register_length;
+ uint8_t register_spacing;
+ enum {
+ IPMI_MEMSPACE_IO,
+ IPMI_MEMSPACE_MEM32,
+ IPMI_MEMSPACE_MEM64,
+ IPMI_MEMSPACE_SMBUS
+ } memspace;
+
+ int interrupt_number;
+ enum {
+ IPMI_LEVEL_IRQ,
+ IPMI_EDGE_IRQ
+ } irq_type;
+
+ const char *acpi_parent;
+} IPMIFwInfo;
+
+typedef void (*IPMIFwHandler)(IPMIFwInfo *info, void *opaque);
+
+void ipmi_add_fwinfo(IPMIFwInfo *info);
+void ipmi_register_fwinfo_handler(IPMIFwHandler handler, void *opaque);
+
#ifdef IPMI_DEBUG
#define ipmi_debug(fs, ...) \
fprintf(stderr, "IPMI (%s): " fs, __func__, ##__VA_ARGS__)
--
1.8.3.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [Qemu-devel] [PATCH v3 10/16] ipmi: Add firmware registration to the ISA interface
2015-06-09 1:11 [Qemu-devel] [PATCH v3 00/16] Add an IPMI device to QEMU minyard
` (8 preceding siblings ...)
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 09/16] ipmi: Add a firmware configuration repository minyard
@ 2015-06-09 1:12 ` minyard
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 11/16] smbios: Add a function to directly add an entry minyard
` (8 subsequent siblings)
18 siblings, 0 replies; 31+ messages in thread
From: minyard @ 2015-06-09 1:12 UTC (permalink / raw)
To: qemu-devel; +Cc: Corey Minyard
From: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
---
hw/ipmi/isa_ipmi_bt.c | 15 +++++++++++++++
hw/ipmi/isa_ipmi_kcs.c | 15 +++++++++++++++
2 files changed, 30 insertions(+)
diff --git a/hw/ipmi/isa_ipmi_bt.c b/hw/ipmi/isa_ipmi_bt.c
index 03eb9cc..6696da9 100644
--- a/hw/ipmi/isa_ipmi_bt.c
+++ b/hw/ipmi/isa_ipmi_bt.c
@@ -407,6 +407,7 @@ typedef struct ISAIPMIBTDevice {
ISADevice dev;
int32 isairq;
IPMIBT bt;
+ IPMIFwInfo fwinfo;
} ISAIPMIBTDevice;
static void isa_ipmi_bt_realize(DeviceState *dev, Error **errp)
@@ -435,6 +436,20 @@ static void isa_ipmi_bt_realize(DeviceState *dev, Error **errp)
qdev_set_legacy_instance_id(dev, iib->bt.io_base, iib->bt.io_length);
isa_register_ioport(isadev, &iib->bt.io, iib->bt.io_base);
+
+ iib->fwinfo.interface_name = "bt";
+ iib->fwinfo.interface_type = IPMI_SMBIOS_BT;
+ iib->fwinfo.ipmi_spec_major_revision = 2;
+ iib->fwinfo.ipmi_spec_minor_revision = 0;
+ iib->fwinfo.base_address = iib->bt.io_base;
+ iib->fwinfo.register_length = iib->bt.io_length;
+ iib->fwinfo.register_spacing = 1;
+ iib->fwinfo.memspace = IPMI_MEMSPACE_IO;
+ iib->fwinfo.irq_type = IPMI_LEVEL_IRQ;
+ iib->fwinfo.interrupt_number = iib->isairq;
+ iib->fwinfo.acpi_parent = "\\_SB.PCI0.ISA";
+ iib->fwinfo.i2c_slave_address = iib->bt.bmc->slave_addr;
+ ipmi_add_fwinfo(&iib->fwinfo);
}
static const VMStateDescription vmstate_ISAIPMIBTDevice = {
diff --git a/hw/ipmi/isa_ipmi_kcs.c b/hw/ipmi/isa_ipmi_kcs.c
index b588711..36ae683 100644
--- a/hw/ipmi/isa_ipmi_kcs.c
+++ b/hw/ipmi/isa_ipmi_kcs.c
@@ -370,6 +370,7 @@ typedef struct ISAIPMIKCSDevice {
ISADevice dev;
int32 isairq;
IPMIKCS kcs;
+ IPMIFwInfo fwinfo;
} ISAIPMIKCSDevice;
static void ipmi_isa_realize(DeviceState *dev, Error **errp)
@@ -398,6 +399,20 @@ static void ipmi_isa_realize(DeviceState *dev, Error **errp)
qdev_set_legacy_instance_id(dev, iik->kcs.io_base, iik->kcs.io_length);
isa_register_ioport(isadev, &iik->kcs.io, iik->kcs.io_base);
+
+ iik->fwinfo.interface_name = "kcs";
+ iik->fwinfo.interface_type = IPMI_SMBIOS_KCS;
+ iik->fwinfo.ipmi_spec_major_revision = 2;
+ iik->fwinfo.ipmi_spec_minor_revision = 0;
+ iik->fwinfo.base_address = iik->kcs.io_base;
+ iik->fwinfo.i2c_slave_address = iik->kcs.bmc->slave_addr;
+ iik->fwinfo.register_length = iik->kcs.io_length;
+ iik->fwinfo.register_spacing = 1;
+ iik->fwinfo.memspace = IPMI_MEMSPACE_IO;
+ iik->fwinfo.irq_type = IPMI_LEVEL_IRQ;
+ iik->fwinfo.interrupt_number = iik->isairq;
+ iik->fwinfo.acpi_parent = "\\_SB.PCI0.ISA";
+ ipmi_add_fwinfo(&iik->fwinfo);
}
const VMStateDescription vmstate_ISAIPMIKCSDevice = {
--
1.8.3.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [Qemu-devel] [PATCH v3 11/16] smbios: Add a function to directly add an entry
2015-06-09 1:11 [Qemu-devel] [PATCH v3 00/16] Add an IPMI device to QEMU minyard
` (9 preceding siblings ...)
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 10/16] ipmi: Add firmware registration to the ISA interface minyard
@ 2015-06-09 1:12 ` minyard
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 12/16] pc: Postpone SMBIOS table installation to post machine init minyard
` (7 subsequent siblings)
18 siblings, 0 replies; 31+ messages in thread
From: minyard @ 2015-06-09 1:12 UTC (permalink / raw)
To: qemu-devel; +Cc: Corey Minyard
From: Corey Minyard <cminyard@mvista.com>
There was no way to directly add a table entry to the SMBIOS table,
even though the BIOS supports this. So add a function to do this.
This is in preparation for the IPMI handler adding it's SMBIOS table
entry.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
---
hw/i386/smbios.c | 153 +++++++++++++++++++++++++++++++----------------
include/hw/i386/smbios.h | 8 +++
2 files changed, 109 insertions(+), 52 deletions(-)
diff --git a/hw/i386/smbios.c b/hw/i386/smbios.c
index 1341e02..68ad0be 100644
--- a/hw/i386/smbios.c
+++ b/hw/i386/smbios.c
@@ -831,6 +831,92 @@ static void smbios_entry_point_setup(void)
ep.structure_table_address = cpu_to_le32(0);
}
+struct smbios_table_entry {
+ void *data;
+ int size;
+ bool append_zeros;
+ QSLIST_ENTRY(smbios_table_entry) next;
+};
+
+static QSLIST_HEAD(, smbios_table_entry) table_entries;
+
+void smbios_add_table_entry(void *data, int size, bool append_zeros)
+{
+ struct smbios_table_entry *e = g_malloc(sizeof(*e));
+
+ e->data = g_malloc(size);
+ memcpy(e->data, data, size);
+ e->size = size;
+ e->append_zeros = append_zeros;
+ QSLIST_INSERT_HEAD(&table_entries, e, next);
+}
+
+static void smbios_table_entry_append(void *data, int size, bool append_zeros)
+{
+ struct smbios_structure_header *header;
+ struct smbios_table *table; /* legacy mode only */
+
+ /*
+ * NOTE: standard double '\0' terminator expected, per smbios spec.
+ * (except in legacy mode, where the second '\0' is implicit and
+ * will be inserted by the BIOS).
+ */
+ if (append_zeros) {
+ size += 2;
+ }
+ smbios_tables = g_realloc(smbios_tables, smbios_tables_len + size);
+ header = (struct smbios_structure_header *)(smbios_tables +
+ smbios_tables_len);
+
+ memcpy(header, data, size);
+ if (append_zeros) {
+ memset(smbios_tables + smbios_tables_len + size - 2, 0, 2);
+ }
+
+ if (test_bit(header->type, have_fields_bitmap)) {
+ error_report("can't load type %d struct, fields already specified!",
+ header->type);
+ exit(1);
+ }
+ set_bit(header->type, have_binfile_bitmap);
+
+ if (header->type == 4) {
+ smbios_type4_count++;
+ }
+
+ smbios_tables_len += size;
+ if (size > smbios_table_max) {
+ smbios_table_max = size;
+ }
+ smbios_table_cnt++;
+
+ /* add a copy of the newly loaded blob to legacy smbios_entries */
+ /* NOTE: This code runs before smbios_set_defaults(), so we don't
+ * yet know which mode (legacy vs. aggregate-table) will be
+ * required. We therefore add the binary blob to both legacy
+ * (smbios_entries) and aggregate (smbios_tables) tables, and
+ * delete the one we don't need from smbios_set_defaults(),
+ * once we know which machine version has been requested.
+ */
+ if (!smbios_entries) {
+ smbios_entries_len = sizeof(uint16_t);
+ smbios_entries = g_malloc0(smbios_entries_len);
+ }
+ if (append_zeros) {
+ size -= 1; /* The BIOS adds the second zero in legacy mode. */
+ }
+ smbios_entries = g_realloc(smbios_entries, smbios_entries_len +
+ size + sizeof(*table));
+ table = (struct smbios_table *)(smbios_entries + smbios_entries_len);
+ table->header.type = SMBIOS_TABLE_ENTRY;
+ table->header.length = cpu_to_le16(sizeof(*table) + size);
+ memcpy(table->data, header, size);
+ smbios_entries_len += sizeof(*table) + size;
+ (*(uint16_t *)smbios_entries) =
+ cpu_to_le16(le16_to_cpu(*(uint16_t *)smbios_entries) + 1);
+ /* end: add a copy of the newly loaded blob to legacy smbios_entries */
+}
+
void smbios_get_tables(uint8_t **tables, size_t *tables_len,
uint8_t **anchor, size_t *anchor_len)
{
@@ -875,6 +961,16 @@ void smbios_get_tables(uint8_t **tables, size_t *tables_len,
}
smbios_build_type_32_table();
+
+ while (!QSLIST_EMPTY(&table_entries)) {
+ struct smbios_table_entry *e = QSLIST_FIRST(&table_entries);
+
+ QSLIST_REMOVE_HEAD(&table_entries, next);
+ smbios_table_entry_append(e->data, e->size, e->append_zeros);
+ g_free(e->data);
+ g_free(e);
+ }
+
smbios_build_type_127_table();
smbios_validate_table();
@@ -907,9 +1003,8 @@ void smbios_entry_add(QemuOpts *opts)
val = qemu_opt_get(opts, "file");
if (val) {
- struct smbios_structure_header *header;
int size;
- struct smbios_table *table; /* legacy mode only */
+ uint8_t *data;
qemu_opts_validate(opts, qemu_smbios_file_opts, &local_err);
if (local_err) {
@@ -923,60 +1018,14 @@ void smbios_entry_add(QemuOpts *opts)
exit(1);
}
- /*
- * NOTE: standard double '\0' terminator expected, per smbios spec.
- * (except in legacy mode, where the second '\0' is implicit and
- * will be inserted by the BIOS).
- */
- smbios_tables = g_realloc(smbios_tables, smbios_tables_len + size);
- header = (struct smbios_structure_header *)(smbios_tables +
- smbios_tables_len);
-
- if (load_image(val, (uint8_t *)header) != size) {
+ data = g_malloc(size);
+ if (load_image(val, data) != size) {
error_report("Failed to load SMBIOS file %s", val);
exit(1);
}
- if (test_bit(header->type, have_fields_bitmap)) {
- error_report("can't load type %d struct, fields already specified!",
- header->type);
- exit(1);
- }
- set_bit(header->type, have_binfile_bitmap);
-
- if (header->type == 4) {
- smbios_type4_count++;
- }
-
- smbios_tables_len += size;
- if (size > smbios_table_max) {
- smbios_table_max = size;
- }
- smbios_table_cnt++;
-
- /* add a copy of the newly loaded blob to legacy smbios_entries */
- /* NOTE: This code runs before smbios_set_defaults(), so we don't
- * yet know which mode (legacy vs. aggregate-table) will be
- * required. We therefore add the binary blob to both legacy
- * (smbios_entries) and aggregate (smbios_tables) tables, and
- * delete the one we don't need from smbios_set_defaults(),
- * once we know which machine version has been requested.
- */
- if (!smbios_entries) {
- smbios_entries_len = sizeof(uint16_t);
- smbios_entries = g_malloc0(smbios_entries_len);
- }
- smbios_entries = g_realloc(smbios_entries, smbios_entries_len +
- size + sizeof(*table));
- table = (struct smbios_table *)(smbios_entries + smbios_entries_len);
- table->header.type = SMBIOS_TABLE_ENTRY;
- table->header.length = cpu_to_le16(sizeof(*table) + size);
- memcpy(table->data, header, size);
- smbios_entries_len += sizeof(*table) + size;
- (*(uint16_t *)smbios_entries) =
- cpu_to_le16(le16_to_cpu(*(uint16_t *)smbios_entries) + 1);
- /* end: add a copy of the newly loaded blob to legacy smbios_entries */
-
+ smbios_table_entry_append(data, size, false);
+ g_free(data);
return;
}
diff --git a/include/hw/i386/smbios.h b/include/hw/i386/smbios.h
index d2850be..9f3e920 100644
--- a/include/hw/i386/smbios.h
+++ b/include/hw/i386/smbios.h
@@ -27,6 +27,14 @@ void smbios_get_tables(uint8_t **tables, size_t *tables_len,
uint8_t **anchor, size_t *anchor_len);
/*
+ * Add an external entry to the SMBIOS table. Can only be called
+ * from a registered device table handler. This will store the
+ * given data in a queue and append it when the SMBIOS table is
+ * built.
+ */
+void smbios_add_table_entry(void *data, int size, bool append_zeros);
+
+/*
* SMBIOS spec defined tables
*/
--
1.8.3.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [Qemu-devel] [PATCH v3 12/16] pc: Postpone SMBIOS table installation to post machine init
2015-06-09 1:11 [Qemu-devel] [PATCH v3 00/16] Add an IPMI device to QEMU minyard
` (10 preceding siblings ...)
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 11/16] smbios: Add a function to directly add an entry minyard
@ 2015-06-09 1:12 ` minyard
2015-07-03 8:17 ` Michael S. Tsirkin
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 13/16] ipmi: Add SMBIOS table entry minyard
` (6 subsequent siblings)
18 siblings, 1 reply; 31+ messages in thread
From: minyard @ 2015-06-09 1:12 UTC (permalink / raw)
To: qemu-devel; +Cc: Corey Minyard
From: Corey Minyard <cminyard@mvista.com>
This is the same place that the ACPI SSDT table gets added, so that
devices can add themselves to the SMBIOS table.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
---
hw/i386/pc.c | 35 ++++++++++++++++++-----------------
1 file changed, 18 insertions(+), 17 deletions(-)
diff --git a/hw/i386/pc.c b/hw/i386/pc.c
index a8e6be1..efe3c2f 100644
--- a/hw/i386/pc.c
+++ b/hw/i386/pc.c
@@ -680,8 +680,6 @@ static unsigned int pc_apic_id_limit(unsigned int max_cpus)
static FWCfgState *bochs_bios_init(void)
{
FWCfgState *fw_cfg;
- uint8_t *smbios_tables, *smbios_anchor;
- size_t smbios_tables_len, smbios_anchor_len;
uint64_t *numa_fw_cfg;
int i, j;
unsigned int apic_id_limit = pc_apic_id_limit(max_cpus);
@@ -707,21 +705,6 @@ static FWCfgState *bochs_bios_init(void)
acpi_tables, acpi_tables_len);
fw_cfg_add_i32(fw_cfg, FW_CFG_IRQ0_OVERRIDE, kvm_allows_irq0_override());
- smbios_tables = smbios_get_table_legacy(&smbios_tables_len);
- if (smbios_tables) {
- fw_cfg_add_bytes(fw_cfg, FW_CFG_SMBIOS_ENTRIES,
- smbios_tables, smbios_tables_len);
- }
-
- smbios_get_tables(&smbios_tables, &smbios_tables_len,
- &smbios_anchor, &smbios_anchor_len);
- if (smbios_anchor) {
- fw_cfg_add_file(fw_cfg, "etc/smbios/smbios-tables",
- smbios_tables, smbios_tables_len);
- fw_cfg_add_file(fw_cfg, "etc/smbios/smbios-anchor",
- smbios_anchor, smbios_anchor_len);
- }
-
fw_cfg_add_bytes(fw_cfg, FW_CFG_E820_TABLE,
&e820_reserve, sizeof(e820_reserve));
fw_cfg_add_file(fw_cfg, "etc/e820", e820_table,
@@ -1119,7 +1102,25 @@ void pc_guest_info_machine_done(Notifier *notifier, void *data)
PcGuestInfoState *guest_info_state = container_of(notifier,
PcGuestInfoState,
machine_done);
+ uint8_t *smbios_tables, *smbios_anchor;
+ size_t smbios_tables_len, smbios_anchor_len;
+ FWCfgState *fw_cfg = guest_info_state->info.fw_cfg;
+
acpi_setup(&guest_info_state->info);
+
+ smbios_tables = smbios_get_table_legacy(&smbios_tables_len);
+ if (smbios_tables) {
+ fw_cfg_add_bytes(fw_cfg, FW_CFG_SMBIOS_ENTRIES,
+ smbios_tables, smbios_tables_len);
+ }
+ smbios_get_tables(&smbios_tables, &smbios_tables_len,
+ &smbios_anchor, &smbios_anchor_len);
+ if (smbios_anchor) {
+ fw_cfg_add_file(fw_cfg, "etc/smbios/smbios-tables",
+ smbios_tables, smbios_tables_len);
+ fw_cfg_add_file(fw_cfg, "etc/smbios/smbios-anchor",
+ smbios_anchor, smbios_anchor_len);
+ }
}
PcGuestInfo *pc_guest_info_init(ram_addr_t below_4g_mem_size,
--
1.8.3.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [Qemu-devel] [PATCH v3 13/16] ipmi: Add SMBIOS table entry
2015-06-09 1:11 [Qemu-devel] [PATCH v3 00/16] Add an IPMI device to QEMU minyard
` (11 preceding siblings ...)
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 12/16] pc: Postpone SMBIOS table installation to post machine init minyard
@ 2015-06-09 1:12 ` minyard
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 14/16] acpi: Add a way for devices to add ACPI tables minyard
` (5 subsequent siblings)
18 siblings, 0 replies; 31+ messages in thread
From: minyard @ 2015-06-09 1:12 UTC (permalink / raw)
To: qemu-devel; +Cc: Corey Minyard
From: Corey Minyard <cminyard@mvista.com>
Add an IPMI table entry to the SMBIOS.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
---
default-configs/i386-softmmu.mak | 1 +
default-configs/x86_64-softmmu.mak | 1 +
hw/ipmi/Makefile.objs | 1 +
hw/ipmi/ipmi_smbios.c | 89 ++++++++++++++++++++++++++++++++++++++
4 files changed, 92 insertions(+)
create mode 100644 hw/ipmi/ipmi_smbios.c
diff --git a/default-configs/i386-softmmu.mak b/default-configs/i386-softmmu.mak
index c1c9d4a..95fb96b 100644
--- a/default-configs/i386-softmmu.mak
+++ b/default-configs/i386-softmmu.mak
@@ -19,6 +19,7 @@ CONFIG_I8254=y
CONFIG_PCSPK=y
CONFIG_PCKBD=y
CONFIG_FDC=y
+CONFIG_SMBIOS=y
CONFIG_ACPI=y
CONFIG_APM=y
CONFIG_I8257=y
diff --git a/default-configs/x86_64-softmmu.mak b/default-configs/x86_64-softmmu.mak
index 84b18a8..b269379 100644
--- a/default-configs/x86_64-softmmu.mak
+++ b/default-configs/x86_64-softmmu.mak
@@ -19,6 +19,7 @@ CONFIG_I8254=y
CONFIG_PCSPK=y
CONFIG_PCKBD=y
CONFIG_FDC=y
+CONFIG_SMBIOS=y
CONFIG_ACPI=y
CONFIG_APM=y
CONFIG_I8257=y
diff --git a/hw/ipmi/Makefile.objs b/hw/ipmi/Makefile.objs
index a90318d..81fb8e7 100644
--- a/hw/ipmi/Makefile.objs
+++ b/hw/ipmi/Makefile.objs
@@ -3,3 +3,4 @@ common-obj-$(CONFIG_IPMI_LOCAL) += ipmi_bmc_sim.o
common-obj-$(CONFIG_IPMI_LOCAL) += ipmi_bmc_extern.o
common-obj-$(CONFIG_ISA_IPMI_KCS) += isa_ipmi_kcs.o
common-obj-$(CONFIG_ISA_IPMI_BT) += isa_ipmi_bt.o
+common-obj-$(call land,$(CONFIG_IPMI),$(CONFIG_SMBIOS)) += ipmi_smbios.o
diff --git a/hw/ipmi/ipmi_smbios.c b/hw/ipmi/ipmi_smbios.c
new file mode 100644
index 0000000..c67d29a
--- /dev/null
+++ b/hw/ipmi/ipmi_smbios.c
@@ -0,0 +1,89 @@
+/*
+ * IPMI SMBIOS firmware handling
+ *
+ * Copyright (c) 2015 Corey Minyard, MontaVista Software, LLC
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "hw/ipmi/ipmi.h"
+#include <hw/i386/smbios.h>
+#include <qemu/error-report.h>
+
+/* SMBIOS type 38 - IPMI */
+struct smbios_type_38 {
+ struct smbios_structure_header header;
+ uint8_t interface_type;
+ uint8_t ipmi_spec_revision;
+ uint8_t i2c_slave_address;
+ uint8_t nv_storage_device_address;
+ uint64_t base_address;
+ uint8_t base_address_modifier;
+ uint8_t interrupt_number;
+} QEMU_PACKED;
+
+static void ipmi_encode_one_smbios(IPMIFwInfo *info, void *opaque)
+{
+ struct smbios_type_38 smb38;
+ uint64_t baseaddr = info->base_address;
+
+ smb38.header.type = 38;
+ smb38.header.length = sizeof(smb38);
+ smb38.header.handle = cpu_to_le16(0x3000);
+ smb38.interface_type = info->interface_type;
+ smb38.ipmi_spec_revision = ((info->ipmi_spec_major_revision << 4)
+ | info->ipmi_spec_minor_revision);
+ smb38.i2c_slave_address = info->i2c_slave_address;
+ smb38.nv_storage_device_address = 0;
+
+ /* or 1 to set it to I/O space */
+ switch (info->memspace) {
+ case IPMI_MEMSPACE_IO: baseaddr |= 1; break;
+ case IPMI_MEMSPACE_MEM32: break;
+ case IPMI_MEMSPACE_MEM64: break;
+ case IPMI_MEMSPACE_SMBUS: baseaddr <<= 1; break;
+ }
+
+ smb38.base_address = cpu_to_le64(baseaddr);
+
+ smb38.base_address_modifier = 0;
+ if (info->irq_type == IPMI_LEVEL_IRQ) {
+ smb38.base_address_modifier |= 1;
+ }
+ switch (info->register_spacing) {
+ case 1: break;
+ case 4: smb38.base_address_modifier |= 1 << 6; break;
+ case 16: smb38.base_address_modifier |= 2 << 6; break;
+ default:
+ error_report("IPMI register spacing %d is not compatible with"
+ " SMBIOS, ignoring this entry.", info->register_spacing);
+ return;
+ }
+ smb38.interrupt_number = info->interrupt_number;
+
+ smbios_add_table_entry((struct smbios_structure_header *) &smb38,
+ sizeof(smb38), true);
+}
+
+static void smbios_init(void)
+{
+ ipmi_register_fwinfo_handler(ipmi_encode_one_smbios, NULL);
+}
+
+type_init(smbios_init);
--
1.8.3.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [Qemu-devel] [PATCH v3 14/16] acpi: Add a way for devices to add ACPI tables
2015-06-09 1:11 [Qemu-devel] [PATCH v3 00/16] Add an IPMI device to QEMU minyard
` (12 preceding siblings ...)
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 13/16] ipmi: Add SMBIOS table entry minyard
@ 2015-06-09 1:12 ` minyard
2015-07-03 8:21 ` Michael S. Tsirkin
` (2 more replies)
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 15/16] ipmi: Add ACPI table entries minyard
` (4 subsequent siblings)
18 siblings, 3 replies; 31+ messages in thread
From: minyard @ 2015-06-09 1:12 UTC (permalink / raw)
To: qemu-devel; +Cc: Corey Minyard
From: Corey Minyard <cminyard@mvista.com>
Some devices, like IPMI, need to add ACPI table entries to report
their presence. Add a method for adding these entries.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
---
hw/acpi/Makefile.objs | 1 +
hw/acpi/acpi-dev-tables.c | 80 +++++++++++++++++++++++++++++++++++++++
hw/i386/acpi-build.c | 17 +++++++++
include/hw/acpi/acpi-dev-tables.h | 38 +++++++++++++++++++
4 files changed, 136 insertions(+)
create mode 100644 hw/acpi/acpi-dev-tables.c
create mode 100644 include/hw/acpi/acpi-dev-tables.h
diff --git a/hw/acpi/Makefile.objs b/hw/acpi/Makefile.objs
index b9fefa7..2b84f08 100644
--- a/hw/acpi/Makefile.objs
+++ b/hw/acpi/Makefile.objs
@@ -3,3 +3,4 @@ common-obj-$(CONFIG_ACPI) += memory_hotplug.o
common-obj-$(CONFIG_ACPI) += acpi_interface.o
common-obj-$(CONFIG_ACPI) += bios-linker-loader.o
common-obj-$(CONFIG_ACPI) += aml-build.o
+common-obj-$(CONFIG_ACPI) += acpi-dev-tables.o
diff --git a/hw/acpi/acpi-dev-tables.c b/hw/acpi/acpi-dev-tables.c
new file mode 100644
index 0000000..7f07a3d
--- /dev/null
+++ b/hw/acpi/acpi-dev-tables.c
@@ -0,0 +1,80 @@
+/*
+ * Add and get ACPI tables registered by devices.
+ *
+ * Copyright (c) 2015 Corey Minyard, MontaVista Software, LLC
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <string.h>
+#include <hw/acpi/acpi-dev-tables.h>
+#include <qemu/queue.h>
+
+struct acpi_dev_table {
+ void *data;
+ int size;
+ const char *sig;
+ uint8_t rev;
+ QSLIST_ENTRY(acpi_dev_table) next;
+};
+
+static QSLIST_HEAD(, acpi_dev_table) acpi_table_entries;
+
+void
+add_acpi_dev_table(void *data, int size, const char *sig, uint8_t rev)
+{
+ struct acpi_dev_table *e = g_malloc(sizeof(*e));
+
+ e->data = g_malloc(size);
+ memcpy(e->data, data, size);
+ e->size = size;
+ e->sig = sig;
+ e->rev = rev;
+ QSLIST_INSERT_HEAD(&acpi_table_entries, e, next);
+}
+
+struct acpi_dev_table *acpi_dev_table_first(void)
+{
+ return QSLIST_FIRST(&acpi_table_entries);
+}
+
+struct acpi_dev_table *acpi_dev_table_next(struct acpi_dev_table *current)
+{
+ return QSLIST_NEXT(current, next);
+}
+
+uint8_t *acpi_dev_table_data(struct acpi_dev_table *e)
+{
+ return e->data;
+}
+
+unsigned acpi_dev_table_len(struct acpi_dev_table *e)
+{
+ return e->size;
+}
+
+const char *acpi_dev_table_sig(struct acpi_dev_table *e)
+{
+ return e->sig;
+}
+
+uint8_t acpi_dev_table_rev(struct acpi_dev_table *e)
+{
+ return e->rev;
+}
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index e761005..0b4d195 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -35,6 +35,7 @@
#include "hw/timer/hpet.h"
#include "hw/i386/acpi-defs.h"
#include "hw/acpi/acpi.h"
+#include "hw/acpi/acpi-dev-tables.h"
#include "hw/nvram/fw_cfg.h"
#include "hw/acpi/bios-linker-loader.h"
#include "hw/loader.h"
@@ -1377,6 +1378,7 @@ void acpi_build(PcGuestInfo *guest_info, AcpiBuildTables *tables)
AcpiMcfgInfo mcfg;
PcPciInfo pci;
uint8_t *u;
+ struct acpi_dev_table *dt;
size_t aml_len = 0;
GArray *tables_blob = tables->table_data;
@@ -1448,6 +1450,21 @@ void acpi_build(PcGuestInfo *guest_info, AcpiBuildTables *tables)
build_dmar_q35(tables_blob, tables->linker);
}
+ /* Add tables from devices. */
+ for (dt = acpi_dev_table_first(); dt; dt = acpi_dev_table_next(dt)) {
+ unsigned len = acpi_dev_table_len(dt);
+ void *data = acpi_dev_table_data(dt);
+
+ acpi_add_table(table_offsets, tables_blob);
+ acpi_data_push(tables_blob, sizeof(AcpiTableHeader));
+ g_array_append_vals(tables_blob, data, len);
+ build_header(tables->linker, tables_blob,
+ (void *)(tables_blob->data + tables_blob->len -
+ len - sizeof(AcpiTableHeader)),
+ acpi_dev_table_sig(dt), len + sizeof(AcpiTableHeader),
+ acpi_dev_table_rev(dt));
+ }
+
/* Add tables supplied by user (if any) */
for (u = acpi_table_first(); u; u = acpi_table_next(u)) {
unsigned len = acpi_table_len(u);
diff --git a/include/hw/acpi/acpi-dev-tables.h b/include/hw/acpi/acpi-dev-tables.h
new file mode 100644
index 0000000..6dd18a5
--- /dev/null
+++ b/include/hw/acpi/acpi-dev-tables.h
@@ -0,0 +1,38 @@
+/*
+ * Add and get ACPI tables registered by devices.
+ *
+ * Copyright (C) 2015 Corey Minyard <cminyard@mvista.com>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License version 2 as published by the Free Software Foundation.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>
+ *
+ * Contributions after 2012-01-13 are licensed under the terms of the
+ * GNU GPL, version 2 or (at your option) any later version.
+ */
+
+#ifndef QEMU_HW_ACPI_HOOKS_H
+#define QEMU_HW_ACPI_HOOKS_H
+
+#include <hw/acpi/aml-build.h>
+
+void add_acpi_dev_table(void *data, int size, const char *sig, uint8_t rev);
+
+struct acpi_dev_table;
+
+struct acpi_dev_table *acpi_dev_table_first(void);
+struct acpi_dev_table *acpi_dev_table_next(struct acpi_dev_table *current);
+uint8_t *acpi_dev_table_data(struct acpi_dev_table *);
+unsigned acpi_dev_table_len(struct acpi_dev_table *);
+const char *acpi_dev_table_sig(struct acpi_dev_table *);
+uint8_t acpi_dev_table_rev(struct acpi_dev_table *);
+
+#endif /* QEMU_HW_ACPI_HOOKS_H */
--
1.8.3.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [Qemu-devel] [PATCH v3 15/16] ipmi: Add ACPI table entries
2015-06-09 1:11 [Qemu-devel] [PATCH v3 00/16] Add an IPMI device to QEMU minyard
` (13 preceding siblings ...)
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 14/16] acpi: Add a way for devices to add ACPI tables minyard
@ 2015-06-09 1:12 ` minyard
2015-07-07 9:47 ` Igor Mammedov
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 16/16] bios: Add tests for the IPMI ACPI and SMBIOS entries minyard
` (3 subsequent siblings)
18 siblings, 1 reply; 31+ messages in thread
From: minyard @ 2015-06-09 1:12 UTC (permalink / raw)
To: qemu-devel; +Cc: Corey Minyard
From: Corey Minyard <cminyard@mvista.com>
Use the new ACPI table construction tools to create an ACPI
entry for IPMI.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
---
hw/ipmi/Makefile.objs | 1 +
hw/ipmi/ipmi_acpi.c | 122 ++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 123 insertions(+)
create mode 100644 hw/ipmi/ipmi_acpi.c
diff --git a/hw/ipmi/Makefile.objs b/hw/ipmi/Makefile.objs
index 81fb8e7..a5ba7d5 100644
--- a/hw/ipmi/Makefile.objs
+++ b/hw/ipmi/Makefile.objs
@@ -4,3 +4,4 @@ common-obj-$(CONFIG_IPMI_LOCAL) += ipmi_bmc_extern.o
common-obj-$(CONFIG_ISA_IPMI_KCS) += isa_ipmi_kcs.o
common-obj-$(CONFIG_ISA_IPMI_BT) += isa_ipmi_bt.o
common-obj-$(call land,$(CONFIG_IPMI),$(CONFIG_SMBIOS)) += ipmi_smbios.o
+common-obj-$(call land,$(CONFIG_IPMI),$(CONFIG_ACPI)) += ipmi_acpi.o
diff --git a/hw/ipmi/ipmi_acpi.c b/hw/ipmi/ipmi_acpi.c
new file mode 100644
index 0000000..28ddbe4
--- /dev/null
+++ b/hw/ipmi/ipmi_acpi.c
@@ -0,0 +1,122 @@
+/*
+ * IPMI ACPI firmware handling
+ *
+ * Copyright (c) 2015 Corey Minyard, MontaVista Software, LLC
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "hw/ipmi/ipmi.h"
+#include "hw/acpi/aml-build.h"
+#include "hw/acpi/acpi.h"
+#include "hw/acpi/acpi-dev-tables.h"
+#include <qemu/error-report.h>
+
+static Aml *aml_ipmi_crs(IPMIFwInfo *info)
+{
+ Aml *crs = aml_resource_template();
+ uint8_t regspacing = info->register_spacing;
+
+ if (regspacing == 1) {
+ regspacing = 0;
+ }
+
+ switch (info->memspace) {
+ case IPMI_MEMSPACE_IO:
+ aml_append(crs, aml_io(aml_decode16, info->base_address,
+ info->base_address + info->register_length - 1,
+ regspacing, info->register_length));
+ break;
+ case IPMI_MEMSPACE_MEM32:
+ aml_append(crs,
+ aml_dword_memory(aml_pos_decode,
+ aml_min_fixed, aml_max_fixed,
+ aml_non_cacheable, aml_ReadWrite,
+ 0xffffffff,
+ info->base_address,
+ info->base_address + info->register_length - 1,
+ regspacing, info->register_length));
+ break;
+ case IPMI_MEMSPACE_MEM64:
+ aml_append(crs,
+ aml_qword_memory(aml_pos_decode,
+ aml_min_fixed, aml_max_fixed,
+ aml_non_cacheable, aml_ReadWrite,
+ 0xffffffffffffffffULL,
+ info->base_address,
+ info->base_address + info->register_length - 1,
+ regspacing, info->register_length));
+ break;
+ case IPMI_MEMSPACE_SMBUS:
+ aml_append(crs, aml_return(aml_int(info->base_address)));
+ break;
+ }
+
+ if (info->interrupt_number) {
+ aml_append(crs, aml_irq_no_flags(info->interrupt_number));
+ }
+
+ return crs;
+}
+
+static void
+ipmi_encode_one_acpi(IPMIFwInfo *info, void *opaque)
+{
+ Aml *ssdt, *scope, *dev, *method;
+ char *name;
+ int version = ((info->ipmi_spec_major_revision << 8)
+ | (info->ipmi_spec_minor_revision << 4));
+
+ if (!info->acpi_parent) {
+ ipmi_debug("device %s not compatible with ACPI, no parent given.",
+ info->interface_name);
+ return;
+ }
+
+ ssdt = init_aml_allocator();
+
+ scope = aml_scope("%s", info->acpi_parent);
+ name = g_strdup_printf("ipmi_%s", info->interface_name);
+
+ dev = aml_device("MI0");
+ aml_append(dev, aml_name_decl("_HID", aml_eisaid("IPI0001")));
+ aml_append(dev, aml_name_decl("_STR", aml_string("%s", name)));
+ aml_append(dev, aml_name_decl("_UID", aml_int(0)));
+ aml_append(dev, aml_name_decl("_CRS", aml_ipmi_crs(info)));
+ method = aml_method("_IFT", 0);
+ aml_append(method, aml_return(aml_int(info->interface_type)));
+ aml_append(dev, method);
+ method = aml_method("_SRV", 0);
+ aml_append(method, aml_return(aml_int(version)));
+ aml_append(dev, method);
+
+ aml_append(scope, dev);
+
+ aml_append(ssdt, scope);
+
+ add_acpi_dev_table(ssdt->buf->data, ssdt->buf->len, "SSDT", 1);
+ free_aml_allocator();
+}
+
+static void ipmi_acpi_init(void)
+{
+ ipmi_register_fwinfo_handler(ipmi_encode_one_acpi, NULL);
+}
+
+type_init(ipmi_acpi_init);
--
1.8.3.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [Qemu-devel] [PATCH v3 16/16] bios: Add tests for the IPMI ACPI and SMBIOS entries
2015-06-09 1:11 [Qemu-devel] [PATCH v3 00/16] Add an IPMI device to QEMU minyard
` (14 preceding siblings ...)
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 15/16] ipmi: Add ACPI table entries minyard
@ 2015-06-09 1:12 ` minyard
2015-07-03 0:30 ` [Qemu-devel] [PATCH v3 00/16] Add an IPMI device to QEMU Benjamin Herrenschmidt
` (2 subsequent siblings)
18 siblings, 0 replies; 31+ messages in thread
From: minyard @ 2015-06-09 1:12 UTC (permalink / raw)
To: qemu-devel; +Cc: Corey Minyard
From: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
---
tests/bios-tables-test.c | 114 ++++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 109 insertions(+), 5 deletions(-)
diff --git a/tests/bios-tables-test.c b/tests/bios-tables-test.c
index 735ac61..8266d5e 100644
--- a/tests/bios-tables-test.c
+++ b/tests/bios-tables-test.c
@@ -51,6 +51,10 @@ typedef struct {
GArray *tables;
uint32_t smbios_ep_addr;
struct smbios_entry_point smbios_ep_table;
+ uint8_t *ssdt_compare;
+ int ssdt_compare_len;
+ uint8_t *required_struct_types;
+ int required_struct_types_len;
} test_data;
#define LOW(x) ((x) & 0xff)
@@ -105,6 +109,12 @@ typedef struct {
ACPI_READ_FIELD((table)->asl_compiler_revision, addr); \
} while (0);
+static bool acpi_cmp32(uint32_t actual, const char *expected)
+{
+ actual = cpu_to_le32(actual);
+ return memcmp(&actual, expected, 4) == 0;
+}
+
#define ACPI_ASSERT_CMP(actual, expected) do { \
uint32_t ACPI_ASSERT_CMP_le = cpu_to_le32(actual); \
char ACPI_ASSERT_CMP_str[5] = {}; \
@@ -376,15 +386,28 @@ static void test_acpi_tables(test_data *data)
{
int tables_nr = data->rsdt_tables_nr - 1; /* fadt is first */
int i;
+ bool match_found = !data->ssdt_compare;
for (i = 0; i < tables_nr; i++) {
AcpiSdtTable ssdt_table;
- memset(&ssdt_table, 0 , sizeof(ssdt_table));
+ memset(&ssdt_table, 0, sizeof(ssdt_table));
uint32_t addr = data->rsdt_tables_addr[i + 1]; /* fadt is first */
test_dst_table(&ssdt_table, addr);
- g_array_append_val(data->tables, ssdt_table);
+
+ if (data->ssdt_compare &&
+ acpi_cmp32(ssdt_table.header.signature, "SSDT") &&
+ data->ssdt_compare_len == ssdt_table.aml_len &&
+ memcmp(data->ssdt_compare, ssdt_table.aml,
+ ssdt_table.aml_len) == 0) {
+ match_found = true;
+ g_free(ssdt_table.aml);
+ } else {
+ g_array_append_val(data->tables, ssdt_table);
+ }
}
+
+ g_assert(match_found);
}
static void dump_aml_files(test_data *data, bool rebuild)
@@ -672,7 +695,6 @@ static void test_smbios_structs(test_data *data)
uint32_t addr = ep_table->structure_table_address;
int i, len, max_len = 0;
uint8_t type, prv, crt;
- uint8_t required_struct_types[] = {0, 1, 3, 4, 16, 17, 19, 32, 127};
/* walk the smbios tables */
for (i = 0; i < ep_table->number_of_structures; i++) {
@@ -712,8 +734,8 @@ static void test_smbios_structs(test_data *data)
g_assert_cmpuint(ep_table->max_structure_size, ==, max_len);
/* required struct types must all be present */
- for (i = 0; i < ARRAY_SIZE(required_struct_types); i++) {
- g_assert(test_bit(required_struct_types[i], struct_bitmap));
+ for (i = 0; i < data->required_struct_types_len; i++) {
+ g_assert(test_bit(data->required_struct_types[i], struct_bitmap));
}
}
@@ -775,6 +797,9 @@ static void test_acpi_one(const char *params, test_data *data)
g_free(args);
}
+static uint8_t base_required_struct_types[] =
+ {0, 1, 3, 4, 16, 17, 19, 32, 127};
+
static void test_acpi_piix4_tcg(void)
{
test_data data;
@@ -784,6 +809,8 @@ static void test_acpi_piix4_tcg(void)
*/
memset(&data, 0, sizeof(data));
data.machine = MACHINE_PC;
+ data.required_struct_types = base_required_struct_types;
+ data.required_struct_types_len = ARRAY_SIZE(base_required_struct_types);
test_acpi_one("-machine accel=tcg", &data);
free_test_data(&data);
}
@@ -795,6 +822,8 @@ static void test_acpi_piix4_tcg_bridge(void)
memset(&data, 0, sizeof(data));
data.machine = MACHINE_PC;
data.variant = ".bridge";
+ data.required_struct_types = base_required_struct_types;
+ data.required_struct_types_len = ARRAY_SIZE(base_required_struct_types);
test_acpi_one("-machine accel=tcg -device pci-bridge,chassis_nr=1", &data);
free_test_data(&data);
}
@@ -805,6 +834,8 @@ static void test_acpi_q35_tcg(void)
memset(&data, 0, sizeof(data));
data.machine = MACHINE_Q35;
+ data.required_struct_types = base_required_struct_types;
+ data.required_struct_types_len = ARRAY_SIZE(base_required_struct_types);
test_acpi_one("-machine q35,accel=tcg", &data);
free_test_data(&data);
}
@@ -816,11 +847,82 @@ static void test_acpi_q35_tcg_bridge(void)
memset(&data, 0, sizeof(data));
data.machine = MACHINE_Q35;
data.variant = ".bridge";
+ data.required_struct_types = base_required_struct_types;
+ data.required_struct_types_len = ARRAY_SIZE(base_required_struct_types);
test_acpi_one("-machine q35,accel=tcg -device pci-bridge,chassis_nr=1",
&data);
free_test_data(&data);
}
+static uint8_t ipmi_ssdt_bt_irq5[] = {
+ 0x10, 0x42, 0x06, 0x5c, 0x2f, 0x03, 0x5f, 0x53,
+ 0x42, 0x5f, 0x50, 0x43, 0x49, 0x30, 0x49, 0x53,
+ 0x41, 0x5f, 0x5b, 0x82, 0x4f, 0x04, 0x4d, 0x49,
+ 0x30, 0x5f, 0x08, 0x5f, 0x48, 0x49, 0x44, 0x0c,
+ 0x26, 0x09, 0x00, 0x01, 0x08, 0x5f, 0x53, 0x54,
+ 0x52, 0x0d, 0x69, 0x70, 0x6d, 0x69, 0x5f, 0x62,
+ 0x74, 0x00, 0x08, 0x5f, 0x55, 0x49, 0x44, 0x00,
+ 0x08, 0x5f, 0x43, 0x52, 0x53, 0x11, 0x10, 0x0a,
+ 0x0d, 0x47, 0x01, 0xe4, 0x00, 0xe6, 0x00, 0x00,
+ 0x03, 0x22, 0x20, 0x00, 0x79, 0x00, 0x14, 0x09,
+ 0x5f, 0x49, 0x46, 0x54, 0x00, 0xa4, 0x0a, 0x03,
+ 0x14, 0x0a, 0x5f, 0x53, 0x52, 0x56, 0x00, 0xa4,
+ 0x0b, 0x00, 0x02
+};
+
+static uint8_t ipmi_ssdt_kcs_irq0[] = {
+ 0x10, 0x4f, 0x05, 0x5c, 0x2f, 0x03, 0x5f, 0x53,
+ 0x42, 0x5f, 0x50, 0x43, 0x49, 0x30, 0x49, 0x53,
+ 0x41, 0x5f, 0x5b, 0x82, 0x4c, 0x04, 0x4d, 0x49,
+ 0x30, 0x5f, 0x08, 0x5f, 0x48, 0x49, 0x44, 0x0c,
+ 0x26, 0x09, 0x00, 0x01, 0x08, 0x5f, 0x53, 0x54,
+ 0x52, 0x0d, 0x69, 0x70, 0x6d, 0x69, 0x5f, 0x6b,
+ 0x63, 0x73, 0x00, 0x08, 0x5f, 0x55, 0x49, 0x44,
+ 0x00, 0x08, 0x5f, 0x43, 0x52, 0x53, 0x11, 0x0d,
+ 0x0a, 0x0a, 0x47, 0x01, 0xa2, 0x0c, 0xa3, 0x0c,
+ 0x00, 0x02, 0x79, 0x00, 0x14, 0x08, 0x5f, 0x49,
+ 0x46, 0x54, 0x00, 0xa4, 0x01, 0x14, 0x0a, 0x5f,
+ 0x53, 0x52, 0x56, 0x00, 0xa4, 0x0b, 0x00, 0x02
+};
+
+static uint8_t ipmi_required_struct_types[] =
+ {0, 1, 3, 4, 16, 17, 19, 32, 38, 127};
+
+static void test_acpi_q35_tcg_ipmi(void)
+{
+ test_data data;
+
+ memset(&data, 0, sizeof(data));
+ data.machine = MACHINE_Q35;
+ data.ssdt_compare = ipmi_ssdt_bt_irq5;
+ data.ssdt_compare_len = sizeof(ipmi_ssdt_bt_irq5);
+ data.required_struct_types = ipmi_required_struct_types;
+ data.required_struct_types_len = ARRAY_SIZE(ipmi_required_struct_types);
+ test_acpi_one("-machine q35,accel=tcg -device ipmi-bmc-sim,id=bmc0"
+ " -device isa-ipmi-bt,bmc=bmc0",
+ &data);
+ free_test_data(&data);
+}
+
+static void test_acpi_piix4_tcg_ipmi(void)
+{
+ test_data data;
+
+ /* Supplying -machine accel argument overrides the default (qtest).
+ * This is to make guest actually run.
+ */
+ memset(&data, 0, sizeof(data));
+ data.machine = MACHINE_PC;
+ data.ssdt_compare = ipmi_ssdt_kcs_irq0;
+ data.ssdt_compare_len = sizeof(ipmi_ssdt_kcs_irq0);
+ data.required_struct_types = ipmi_required_struct_types;
+ data.required_struct_types_len = ARRAY_SIZE(ipmi_required_struct_types);
+ test_acpi_one("-machine accel=tcg -device ipmi-bmc-sim,id=bmc0"
+ " -device isa-ipmi-kcs,irq=0,bmc=bmc0",
+ &data);
+ free_test_data(&data);
+}
+
int main(int argc, char *argv[])
{
const char *arch = qtest_get_arch();
@@ -841,6 +943,8 @@ int main(int argc, char *argv[])
qtest_add_func("acpi/piix4/tcg/bridge", test_acpi_piix4_tcg_bridge);
qtest_add_func("acpi/q35/tcg", test_acpi_q35_tcg);
qtest_add_func("acpi/q35/tcg/bridge", test_acpi_q35_tcg_bridge);
+ qtest_add_func("acpi/piix4/tcg/ipmi", test_acpi_piix4_tcg_ipmi);
+ qtest_add_func("acpi/q35/tcg/ipmi", test_acpi_q35_tcg_ipmi);
}
ret = g_test_run();
unlink(disk);
--
1.8.3.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* Re: [Qemu-devel] [PATCH v3 00/16] Add an IPMI device to QEMU
2015-06-09 1:11 [Qemu-devel] [PATCH v3 00/16] Add an IPMI device to QEMU minyard
` (15 preceding siblings ...)
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 16/16] bios: Add tests for the IPMI ACPI and SMBIOS entries minyard
@ 2015-07-03 0:30 ` Benjamin Herrenschmidt
2015-07-03 6:50 ` Paolo Bonzini
2015-07-03 8:23 ` Michael S. Tsirkin
18 siblings, 0 replies; 31+ messages in thread
From: Benjamin Herrenschmidt @ 2015-07-03 0:30 UTC (permalink / raw)
To: minyard; +Cc: qemu-devel
On Mon, 2015-06-08 at 20:11 -0500, minyard@acm.org wrote:
> I have reworked the QEMU IPMI patches, and I believe this design
> improves greatly on the previous one. The suggestions made all
> resulted in better design. To start an IPMI interface
> with this, you would use:
>
> -device ipmi-bmc-sim,id=bmc0 -device isa-ipmi-bt,bmc=bmc0
>
> Note that I did not make the BMCs objects. I started this way, but
> adding properties was ending up duplicating a lot of code already
> in the device core, especially for the chardev link.
>
> I'm not sure of the importance of having a BMC be an object instead
> of a device, but it seems to me that if we do that, it would be
> best to add helper functions to the object core for the chardev
> and integer properties.
Out of curiosity, what's the outlook to have this merged ? I'm working
on a "native" OpenPower (POWER8 based) model which could definitely
make good use of that !
Cheers,
Ben.
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [Qemu-devel] [PATCH v3 00/16] Add an IPMI device to QEMU
2015-06-09 1:11 [Qemu-devel] [PATCH v3 00/16] Add an IPMI device to QEMU minyard
` (16 preceding siblings ...)
2015-07-03 0:30 ` [Qemu-devel] [PATCH v3 00/16] Add an IPMI device to QEMU Benjamin Herrenschmidt
@ 2015-07-03 6:50 ` Paolo Bonzini
2015-07-03 8:23 ` Michael S. Tsirkin
18 siblings, 0 replies; 31+ messages in thread
From: Paolo Bonzini @ 2015-07-03 6:50 UTC (permalink / raw)
To: minyard, qemu-devel, Michael S. Tsirkin
On 09/06/2015 03:11, minyard@acm.org wrote:
> I have reworked the QEMU IPMI patches, and I believe this design
> improves greatly on the previous one. The suggestions made all
> resulted in better design. To start an IPMI interface
> with this, you would use:
>
> -device ipmi-bmc-sim,id=bmc0 -device isa-ipmi-bt,bmc=bmc0
>
> Note that I did not make the BMCs objects. I started this way, but
> adding properties was ending up duplicating a lot of code already
> in the device core, especially for the chardev link.
>
> I'm not sure of the importance of having a BMC be an object instead
> of a device, but it seems to me that if we do that, it would be
> best to add helper functions to the object core for the chardev
> and integer properties.
Hi, sorry for the delay. I missed this because I left for vacation
exactly on the day it was posted. I think it's okay to have it as a device.
Michael, are you going to merge it? Otherwise, just ack the patches and
I will take care of it. Time is ticking fast...
Paolo
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [Qemu-devel] [PATCH v3 12/16] pc: Postpone SMBIOS table installation to post machine init
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 12/16] pc: Postpone SMBIOS table installation to post machine init minyard
@ 2015-07-03 8:17 ` Michael S. Tsirkin
0 siblings, 0 replies; 31+ messages in thread
From: Michael S. Tsirkin @ 2015-07-03 8:17 UTC (permalink / raw)
To: minyard; +Cc: Corey Minyard, qemu-devel, kraxel
On Mon, Jun 08, 2015 at 08:12:07PM -0500, minyard@acm.org wrote:
> From: Corey Minyard <cminyard@mvista.com>
>
> This is the same place that the ACPI SSDT table gets added, so that
> devices can add themselves to the SMBIOS table.
>
> Signed-off-by: Corey Minyard <cminyard@mvista.com>
This will change the order of fwcfg files, problematic
for cross version migrations.
That's exactly the type of problem I pointed out.
Should be made conditional on the new machine type?
Cc Gerd for an opinion.
> ---
> hw/i386/pc.c | 35 ++++++++++++++++++-----------------
> 1 file changed, 18 insertions(+), 17 deletions(-)
>
> diff --git a/hw/i386/pc.c b/hw/i386/pc.c
> index a8e6be1..efe3c2f 100644
> --- a/hw/i386/pc.c
> +++ b/hw/i386/pc.c
> @@ -680,8 +680,6 @@ static unsigned int pc_apic_id_limit(unsigned int max_cpus)
> static FWCfgState *bochs_bios_init(void)
> {
> FWCfgState *fw_cfg;
> - uint8_t *smbios_tables, *smbios_anchor;
> - size_t smbios_tables_len, smbios_anchor_len;
> uint64_t *numa_fw_cfg;
> int i, j;
> unsigned int apic_id_limit = pc_apic_id_limit(max_cpus);
> @@ -707,21 +705,6 @@ static FWCfgState *bochs_bios_init(void)
> acpi_tables, acpi_tables_len);
> fw_cfg_add_i32(fw_cfg, FW_CFG_IRQ0_OVERRIDE, kvm_allows_irq0_override());
>
> - smbios_tables = smbios_get_table_legacy(&smbios_tables_len);
> - if (smbios_tables) {
> - fw_cfg_add_bytes(fw_cfg, FW_CFG_SMBIOS_ENTRIES,
> - smbios_tables, smbios_tables_len);
> - }
> -
> - smbios_get_tables(&smbios_tables, &smbios_tables_len,
> - &smbios_anchor, &smbios_anchor_len);
> - if (smbios_anchor) {
> - fw_cfg_add_file(fw_cfg, "etc/smbios/smbios-tables",
> - smbios_tables, smbios_tables_len);
> - fw_cfg_add_file(fw_cfg, "etc/smbios/smbios-anchor",
> - smbios_anchor, smbios_anchor_len);
> - }
> -
> fw_cfg_add_bytes(fw_cfg, FW_CFG_E820_TABLE,
> &e820_reserve, sizeof(e820_reserve));
> fw_cfg_add_file(fw_cfg, "etc/e820", e820_table,
> @@ -1119,7 +1102,25 @@ void pc_guest_info_machine_done(Notifier *notifier, void *data)
> PcGuestInfoState *guest_info_state = container_of(notifier,
> PcGuestInfoState,
> machine_done);
> + uint8_t *smbios_tables, *smbios_anchor;
> + size_t smbios_tables_len, smbios_anchor_len;
> + FWCfgState *fw_cfg = guest_info_state->info.fw_cfg;
> +
> acpi_setup(&guest_info_state->info);
> +
> + smbios_tables = smbios_get_table_legacy(&smbios_tables_len);
> + if (smbios_tables) {
> + fw_cfg_add_bytes(fw_cfg, FW_CFG_SMBIOS_ENTRIES,
> + smbios_tables, smbios_tables_len);
> + }
> + smbios_get_tables(&smbios_tables, &smbios_tables_len,
> + &smbios_anchor, &smbios_anchor_len);
> + if (smbios_anchor) {
> + fw_cfg_add_file(fw_cfg, "etc/smbios/smbios-tables",
> + smbios_tables, smbios_tables_len);
> + fw_cfg_add_file(fw_cfg, "etc/smbios/smbios-anchor",
> + smbios_anchor, smbios_anchor_len);
> + }
> }
>
> PcGuestInfo *pc_guest_info_init(ram_addr_t below_4g_mem_size,
> --
> 1.8.3.1
>
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [Qemu-devel] [PATCH v3 14/16] acpi: Add a way for devices to add ACPI tables
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 14/16] acpi: Add a way for devices to add ACPI tables minyard
@ 2015-07-03 8:21 ` Michael S. Tsirkin
2015-07-03 8:27 ` Michael S. Tsirkin
2015-07-07 8:08 ` Igor Mammedov
2 siblings, 0 replies; 31+ messages in thread
From: Michael S. Tsirkin @ 2015-07-03 8:21 UTC (permalink / raw)
To: minyard; +Cc: Corey Minyard, qemu-devel
On Mon, Jun 08, 2015 at 08:12:09PM -0500, minyard@acm.org wrote:
> From: Corey Minyard <cminyard@mvista.com>
>
> Some devices, like IPMI, need to add ACPI table entries to report
> their presence. Add a method for adding these entries.
>
> Signed-off-by: Corey Minyard <cminyard@mvista.com>
> ---
> hw/acpi/Makefile.objs | 1 +
> hw/acpi/acpi-dev-tables.c | 80 +++++++++++++++++++++++++++++++++++++++
> hw/i386/acpi-build.c | 17 +++++++++
> include/hw/acpi/acpi-dev-tables.h | 38 +++++++++++++++++++
> 4 files changed, 136 insertions(+)
> create mode 100644 hw/acpi/acpi-dev-tables.c
> create mode 100644 include/hw/acpi/acpi-dev-tables.h
>
> diff --git a/hw/acpi/Makefile.objs b/hw/acpi/Makefile.objs
> index b9fefa7..2b84f08 100644
> --- a/hw/acpi/Makefile.objs
> +++ b/hw/acpi/Makefile.objs
> @@ -3,3 +3,4 @@ common-obj-$(CONFIG_ACPI) += memory_hotplug.o
> common-obj-$(CONFIG_ACPI) += acpi_interface.o
> common-obj-$(CONFIG_ACPI) += bios-linker-loader.o
> common-obj-$(CONFIG_ACPI) += aml-build.o
> +common-obj-$(CONFIG_ACPI) += acpi-dev-tables.o
> diff --git a/hw/acpi/acpi-dev-tables.c b/hw/acpi/acpi-dev-tables.c
> new file mode 100644
> index 0000000..7f07a3d
> --- /dev/null
> +++ b/hw/acpi/acpi-dev-tables.c
> @@ -0,0 +1,80 @@
> +/*
> + * Add and get ACPI tables registered by devices.
> + *
> + * Copyright (c) 2015 Corey Minyard, MontaVista Software, LLC
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a copy
> + * of this software and associated documentation files (the "Software"), to deal
> + * in the Software without restriction, including without limitation the rights
> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> + * copies of the Software, and to permit persons to whom the Software is
> + * furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> + * THE SOFTWARE.
> + */
> +
> +#include <string.h>
> +#include <hw/acpi/acpi-dev-tables.h>
> +#include <qemu/queue.h>
> +
> +struct acpi_dev_table {
> + void *data;
> + int size;
> + const char *sig;
> + uint8_t rev;
> + QSLIST_ENTRY(acpi_dev_table) next;
> +};
> +
> +static QSLIST_HEAD(, acpi_dev_table) acpi_table_entries;
> +
> +void
> +add_acpi_dev_table(void *data, int size, const char *sig, uint8_t rev)
> +{
> + struct acpi_dev_table *e = g_malloc(sizeof(*e));
> +
> + e->data = g_malloc(size);
> + memcpy(e->data, data, size);
> + e->size = size;
> + e->sig = sig;
> + e->rev = rev;
> + QSLIST_INSERT_HEAD(&acpi_table_entries, e, next);
> +}
> +
> +struct acpi_dev_table *acpi_dev_table_first(void)
> +{
> + return QSLIST_FIRST(&acpi_table_entries);
> +}
> +
> +struct acpi_dev_table *acpi_dev_table_next(struct acpi_dev_table *current)
> +{
> + return QSLIST_NEXT(current, next);
> +}
> +
> +uint8_t *acpi_dev_table_data(struct acpi_dev_table *e)
> +{
> + return e->data;
> +}
> +
> +unsigned acpi_dev_table_len(struct acpi_dev_table *e)
> +{
> + return e->size;
> +}
> +
> +const char *acpi_dev_table_sig(struct acpi_dev_table *e)
> +{
> + return e->sig;
> +}
> +
> +uint8_t acpi_dev_table_rev(struct acpi_dev_table *e)
> +{
> + return e->rev;
> +}
> diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
> index e761005..0b4d195 100644
> --- a/hw/i386/acpi-build.c
> +++ b/hw/i386/acpi-build.c
> @@ -35,6 +35,7 @@
> #include "hw/timer/hpet.h"
> #include "hw/i386/acpi-defs.h"
> #include "hw/acpi/acpi.h"
> +#include "hw/acpi/acpi-dev-tables.h"
> #include "hw/nvram/fw_cfg.h"
> #include "hw/acpi/bios-linker-loader.h"
> #include "hw/loader.h"
> @@ -1377,6 +1378,7 @@ void acpi_build(PcGuestInfo *guest_info, AcpiBuildTables *tables)
> AcpiMcfgInfo mcfg;
> PcPciInfo pci;
> uint8_t *u;
> + struct acpi_dev_table *dt;
> size_t aml_len = 0;
> GArray *tables_blob = tables->table_data;
>
> @@ -1448,6 +1450,21 @@ void acpi_build(PcGuestInfo *guest_info, AcpiBuildTables *tables)
> build_dmar_q35(tables_blob, tables->linker);
> }
>
> + /* Add tables from devices. */
> + for (dt = acpi_dev_table_first(); dt; dt = acpi_dev_table_next(dt)) {
> + unsigned len = acpi_dev_table_len(dt);
> + void *data = acpi_dev_table_data(dt);
> +
> + acpi_add_table(table_offsets, tables_blob);
> + acpi_data_push(tables_blob, sizeof(AcpiTableHeader));
> + g_array_append_vals(tables_blob, data, len);
> + build_header(tables->linker, tables_blob,
> + (void *)(tables_blob->data + tables_blob->len -
> + len - sizeof(AcpiTableHeader)),
> + acpi_dev_table_sig(dt), len + sizeof(AcpiTableHeader),
> + acpi_dev_table_rev(dt));
> + }
> +
> /* Add tables supplied by user (if any) */
> for (u = acpi_table_first(); u; u = acpi_table_next(u)) {
> unsigned len = acpi_table_len(u);
> diff --git a/include/hw/acpi/acpi-dev-tables.h b/include/hw/acpi/acpi-dev-tables.h
> new file mode 100644
> index 0000000..6dd18a5
> --- /dev/null
> +++ b/include/hw/acpi/acpi-dev-tables.h
> @@ -0,0 +1,38 @@
> +/*
> + * Add and get ACPI tables registered by devices.
> + *
> + * Copyright (C) 2015 Corey Minyard <cminyard@mvista.com>
> + *
> + * This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Lesser General Public
> + * License version 2 as published by the Free Software Foundation.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * Lesser General Public License for more details.
> + *
> + * You should have received a copy of the GNU Lesser General Public
> + * License along with this library; if not, see <http://www.gnu.org/licenses/>
> + *
> + * Contributions after 2012-01-13 are licensed under the terms of the
> + * GNU GPL, version 2 or (at your option) any later version.
> + */
> +
> +#ifndef QEMU_HW_ACPI_HOOKS_H
> +#define QEMU_HW_ACPI_HOOKS_H
> +
> +#include <hw/acpi/aml-build.h>
you don't seem to do anything with this header.
why include it?
> +
> +void add_acpi_dev_table(void *data, int size, const char *sig, uint8_t rev);
> +
> +struct acpi_dev_table;
Any particular reason to violate the coding style with
the name of this structure.
> +
> +struct acpi_dev_table *acpi_dev_table_first(void);
> +struct acpi_dev_table *acpi_dev_table_next(struct acpi_dev_table *current);
> +uint8_t *acpi_dev_table_data(struct acpi_dev_table *);
> +unsigned acpi_dev_table_len(struct acpi_dev_table *);
> +const char *acpi_dev_table_sig(struct acpi_dev_table *);
> +uint8_t acpi_dev_table_rev(struct acpi_dev_table *);
Pls add documentation for the APIs.
> +
> +#endif /* QEMU_HW_ACPI_HOOKS_H */
> --
> 1.8.3.1
>
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [Qemu-devel] [PATCH v3 00/16] Add an IPMI device to QEMU
2015-06-09 1:11 [Qemu-devel] [PATCH v3 00/16] Add an IPMI device to QEMU minyard
` (17 preceding siblings ...)
2015-07-03 6:50 ` Paolo Bonzini
@ 2015-07-03 8:23 ` Michael S. Tsirkin
18 siblings, 0 replies; 31+ messages in thread
From: Michael S. Tsirkin @ 2015-07-03 8:23 UTC (permalink / raw)
To: minyard; +Cc: qemu-devel
On Mon, Jun 08, 2015 at 08:11:55PM -0500, minyard@acm.org wrote:
> I have reworked the QEMU IPMI patches, and I believe this design
> improves greatly on the previous one. The suggestions made all
> resulted in better design. To start an IPMI interface
> with this, you would use:
>
> -device ipmi-bmc-sim,id=bmc0 -device isa-ipmi-bt,bmc=bmc0
>
> Note that I did not make the BMCs objects. I started this way, but
> adding properties was ending up duplicating a lot of code already
> in the device core, especially for the chardev link.
>
> I'm not sure of the importance of having a BMC be an object instead
> of a device, but it seems to me that if we do that, it would be
> best to add helper functions to the object core for the chardev
> and integer properties.
>
> Thanks,
>
> -corey
In the future pls remember to copy maintainers on patches you post.
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [Qemu-devel] [PATCH v3 14/16] acpi: Add a way for devices to add ACPI tables
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 14/16] acpi: Add a way for devices to add ACPI tables minyard
2015-07-03 8:21 ` Michael S. Tsirkin
@ 2015-07-03 8:27 ` Michael S. Tsirkin
2015-07-07 8:08 ` Igor Mammedov
2 siblings, 0 replies; 31+ messages in thread
From: Michael S. Tsirkin @ 2015-07-03 8:27 UTC (permalink / raw)
To: minyard; +Cc: Corey Minyard, qemu-devel, imammedo
On Mon, Jun 08, 2015 at 08:12:09PM -0500, minyard@acm.org wrote:
> From: Corey Minyard <cminyard@mvista.com>
>
> Some devices, like IPMI, need to add ACPI table entries to report
> their presence. Add a method for adding these entries.
>
> Signed-off-by: Corey Minyard <cminyard@mvista.com>
> ---
> hw/acpi/Makefile.objs | 1 +
> hw/acpi/acpi-dev-tables.c | 80 +++++++++++++++++++++++++++++++++++++++
> hw/i386/acpi-build.c | 17 +++++++++
> include/hw/acpi/acpi-dev-tables.h | 38 +++++++++++++++++++
> 4 files changed, 136 insertions(+)
> create mode 100644 hw/acpi/acpi-dev-tables.c
> create mode 100644 include/hw/acpi/acpi-dev-tables.h
>
> diff --git a/hw/acpi/Makefile.objs b/hw/acpi/Makefile.objs
> index b9fefa7..2b84f08 100644
> --- a/hw/acpi/Makefile.objs
> +++ b/hw/acpi/Makefile.objs
> @@ -3,3 +3,4 @@ common-obj-$(CONFIG_ACPI) += memory_hotplug.o
> common-obj-$(CONFIG_ACPI) += acpi_interface.o
> common-obj-$(CONFIG_ACPI) += bios-linker-loader.o
> common-obj-$(CONFIG_ACPI) += aml-build.o
> +common-obj-$(CONFIG_ACPI) += acpi-dev-tables.o
> diff --git a/hw/acpi/acpi-dev-tables.c b/hw/acpi/acpi-dev-tables.c
> new file mode 100644
> index 0000000..7f07a3d
> --- /dev/null
> +++ b/hw/acpi/acpi-dev-tables.c
> @@ -0,0 +1,80 @@
> +/*
> + * Add and get ACPI tables registered by devices.
> + *
> + * Copyright (c) 2015 Corey Minyard, MontaVista Software, LLC
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a copy
> + * of this software and associated documentation files (the "Software"), to deal
> + * in the Software without restriction, including without limitation the rights
> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> + * copies of the Software, and to permit persons to whom the Software is
> + * furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> + * THE SOFTWARE.
> + */
> +
> +#include <string.h>
> +#include <hw/acpi/acpi-dev-tables.h>
> +#include <qemu/queue.h>
> +
> +struct acpi_dev_table {
> + void *data;
> + int size;
> + const char *sig;
> + uint8_t rev;
> + QSLIST_ENTRY(acpi_dev_table) next;
> +};
> +
> +static QSLIST_HEAD(, acpi_dev_table) acpi_table_entries;
> +
> +void
> +add_acpi_dev_table(void *data, int size, const char *sig, uint8_t rev)
> +{
> + struct acpi_dev_table *e = g_malloc(sizeof(*e));
> +
> + e->data = g_malloc(size);
> + memcpy(e->data, data, size);
> + e->size = size;
> + e->sig = sig;
> + e->rev = rev;
> + QSLIST_INSERT_HEAD(&acpi_table_entries, e, next);
> +}
> +
> +struct acpi_dev_table *acpi_dev_table_first(void)
> +{
> + return QSLIST_FIRST(&acpi_table_entries);
> +}
> +
> +struct acpi_dev_table *acpi_dev_table_next(struct acpi_dev_table *current)
> +{
> + return QSLIST_NEXT(current, next);
> +}
> +
> +uint8_t *acpi_dev_table_data(struct acpi_dev_table *e)
> +{
> + return e->data;
> +}
> +
> +unsigned acpi_dev_table_len(struct acpi_dev_table *e)
> +{
> + return e->size;
> +}
> +
> +const char *acpi_dev_table_sig(struct acpi_dev_table *e)
> +{
> + return e->sig;
> +}
> +
> +uint8_t acpi_dev_table_rev(struct acpi_dev_table *e)
> +{
> + return e->rev;
> +}
First, I think at this point we should limit this to SSDTs.
Second, I think it's a good idea to make OEM table IDs unique.
Cc Igor for an opinion.
> diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
> index e761005..0b4d195 100644
> --- a/hw/i386/acpi-build.c
> +++ b/hw/i386/acpi-build.c
> @@ -35,6 +35,7 @@
> #include "hw/timer/hpet.h"
> #include "hw/i386/acpi-defs.h"
> #include "hw/acpi/acpi.h"
> +#include "hw/acpi/acpi-dev-tables.h"
> #include "hw/nvram/fw_cfg.h"
> #include "hw/acpi/bios-linker-loader.h"
> #include "hw/loader.h"
> @@ -1377,6 +1378,7 @@ void acpi_build(PcGuestInfo *guest_info, AcpiBuildTables *tables)
> AcpiMcfgInfo mcfg;
> PcPciInfo pci;
> uint8_t *u;
> + struct acpi_dev_table *dt;
> size_t aml_len = 0;
> GArray *tables_blob = tables->table_data;
>
> @@ -1448,6 +1450,21 @@ void acpi_build(PcGuestInfo *guest_info, AcpiBuildTables *tables)
> build_dmar_q35(tables_blob, tables->linker);
> }
>
> + /* Add tables from devices. */
> + for (dt = acpi_dev_table_first(); dt; dt = acpi_dev_table_next(dt)) {
> + unsigned len = acpi_dev_table_len(dt);
> + void *data = acpi_dev_table_data(dt);
> +
> + acpi_add_table(table_offsets, tables_blob);
> + acpi_data_push(tables_blob, sizeof(AcpiTableHeader));
> + g_array_append_vals(tables_blob, data, len);
> + build_header(tables->linker, tables_blob,
> + (void *)(tables_blob->data + tables_blob->len -
> + len - sizeof(AcpiTableHeader)),
> + acpi_dev_table_sig(dt), len + sizeof(AcpiTableHeader),
> + acpi_dev_table_rev(dt));
> + }
> +
> /* Add tables supplied by user (if any) */
> for (u = acpi_table_first(); u; u = acpi_table_next(u)) {
> unsigned len = acpi_table_len(u);
> diff --git a/include/hw/acpi/acpi-dev-tables.h b/include/hw/acpi/acpi-dev-tables.h
> new file mode 100644
> index 0000000..6dd18a5
> --- /dev/null
> +++ b/include/hw/acpi/acpi-dev-tables.h
> @@ -0,0 +1,38 @@
> +/*
> + * Add and get ACPI tables registered by devices.
> + *
> + * Copyright (C) 2015 Corey Minyard <cminyard@mvista.com>
> + *
> + * This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Lesser General Public
> + * License version 2 as published by the Free Software Foundation.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * Lesser General Public License for more details.
> + *
> + * You should have received a copy of the GNU Lesser General Public
> + * License along with this library; if not, see <http://www.gnu.org/licenses/>
> + *
> + * Contributions after 2012-01-13 are licensed under the terms of the
> + * GNU GPL, version 2 or (at your option) any later version.
> + */
> +
> +#ifndef QEMU_HW_ACPI_HOOKS_H
> +#define QEMU_HW_ACPI_HOOKS_H
> +
> +#include <hw/acpi/aml-build.h>
> +
> +void add_acpi_dev_table(void *data, int size, const char *sig, uint8_t rev);
> +
> +struct acpi_dev_table;
> +
> +struct acpi_dev_table *acpi_dev_table_first(void);
> +struct acpi_dev_table *acpi_dev_table_next(struct acpi_dev_table *current);
> +uint8_t *acpi_dev_table_data(struct acpi_dev_table *);
> +unsigned acpi_dev_table_len(struct acpi_dev_table *);
> +const char *acpi_dev_table_sig(struct acpi_dev_table *);
> +uint8_t acpi_dev_table_rev(struct acpi_dev_table *);
> +
> +#endif /* QEMU_HW_ACPI_HOOKS_H */
> --
> 1.8.3.1
>
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [Qemu-devel] [PATCH v3 14/16] acpi: Add a way for devices to add ACPI tables
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 14/16] acpi: Add a way for devices to add ACPI tables minyard
2015-07-03 8:21 ` Michael S. Tsirkin
2015-07-03 8:27 ` Michael S. Tsirkin
@ 2015-07-07 8:08 ` Igor Mammedov
2015-07-08 17:44 ` Paolo Bonzini
2 siblings, 1 reply; 31+ messages in thread
From: Igor Mammedov @ 2015-07-07 8:08 UTC (permalink / raw)
To: minyard; +Cc: Corey Minyard, qemu-devel
On Mon, 8 Jun 2015 20:12:09 -0500
minyard@acm.org wrote:
> From: Corey Minyard <cminyard@mvista.com>
>
> Some devices, like IPMI, need to add ACPI table entries to report
> their presence. Add a method for adding these entries.
I think that it's not up to device to define in which table/scope
it's entries should be but rather upto a board/platform to decide.
I'd prefer the old way of adding device's ACPI AML into existing
SSDT, like we do for every other device that needs it
(for example: pvpanic).
That allows to keep ACPI code in one place and for each platform
to decide to which table put a device description and where exactly
it should be.
So I'd drop this patch and add function that returns non NULL
"IPMIFwInfo *" if IPMI device is present and use slightly modified
15/16 to add device entry into the existing SSDT.
> Signed-off-by: Corey Minyard <cminyard@mvista.com>
> ---
> hw/acpi/Makefile.objs | 1 +
> hw/acpi/acpi-dev-tables.c | 80 +++++++++++++++++++++++++++++++++++++++
> hw/i386/acpi-build.c | 17 +++++++++
> include/hw/acpi/acpi-dev-tables.h | 38 +++++++++++++++++++
> 4 files changed, 136 insertions(+)
> create mode 100644 hw/acpi/acpi-dev-tables.c
> create mode 100644 include/hw/acpi/acpi-dev-tables.h
>
> diff --git a/hw/acpi/Makefile.objs b/hw/acpi/Makefile.objs
> index b9fefa7..2b84f08 100644
> --- a/hw/acpi/Makefile.objs
> +++ b/hw/acpi/Makefile.objs
> @@ -3,3 +3,4 @@ common-obj-$(CONFIG_ACPI) += memory_hotplug.o
> common-obj-$(CONFIG_ACPI) += acpi_interface.o
> common-obj-$(CONFIG_ACPI) += bios-linker-loader.o
> common-obj-$(CONFIG_ACPI) += aml-build.o
> +common-obj-$(CONFIG_ACPI) += acpi-dev-tables.o
> diff --git a/hw/acpi/acpi-dev-tables.c b/hw/acpi/acpi-dev-tables.c
> new file mode 100644
> index 0000000..7f07a3d
> --- /dev/null
> +++ b/hw/acpi/acpi-dev-tables.c
> @@ -0,0 +1,80 @@
> +/*
> + * Add and get ACPI tables registered by devices.
> + *
> + * Copyright (c) 2015 Corey Minyard, MontaVista Software, LLC
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a copy
> + * of this software and associated documentation files (the "Software"), to deal
> + * in the Software without restriction, including without limitation the rights
> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> + * copies of the Software, and to permit persons to whom the Software is
> + * furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> + * THE SOFTWARE.
> + */
> +
> +#include <string.h>
> +#include <hw/acpi/acpi-dev-tables.h>
> +#include <qemu/queue.h>
> +
> +struct acpi_dev_table {
> + void *data;
> + int size;
> + const char *sig;
> + uint8_t rev;
> + QSLIST_ENTRY(acpi_dev_table) next;
> +};
> +
> +static QSLIST_HEAD(, acpi_dev_table) acpi_table_entries;
> +
> +void
> +add_acpi_dev_table(void *data, int size, const char *sig, uint8_t rev)
> +{
> + struct acpi_dev_table *e = g_malloc(sizeof(*e));
> +
> + e->data = g_malloc(size);
> + memcpy(e->data, data, size);
> + e->size = size;
> + e->sig = sig;
> + e->rev = rev;
> + QSLIST_INSERT_HEAD(&acpi_table_entries, e, next);
> +}
> +
> +struct acpi_dev_table *acpi_dev_table_first(void)
> +{
> + return QSLIST_FIRST(&acpi_table_entries);
> +}
> +
> +struct acpi_dev_table *acpi_dev_table_next(struct acpi_dev_table *current)
> +{
> + return QSLIST_NEXT(current, next);
> +}
> +
> +uint8_t *acpi_dev_table_data(struct acpi_dev_table *e)
> +{
> + return e->data;
> +}
> +
> +unsigned acpi_dev_table_len(struct acpi_dev_table *e)
> +{
> + return e->size;
> +}
> +
> +const char *acpi_dev_table_sig(struct acpi_dev_table *e)
> +{
> + return e->sig;
> +}
> +
> +uint8_t acpi_dev_table_rev(struct acpi_dev_table *e)
> +{
> + return e->rev;
> +}
> diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
> index e761005..0b4d195 100644
> --- a/hw/i386/acpi-build.c
> +++ b/hw/i386/acpi-build.c
> @@ -35,6 +35,7 @@
> #include "hw/timer/hpet.h"
> #include "hw/i386/acpi-defs.h"
> #include "hw/acpi/acpi.h"
> +#include "hw/acpi/acpi-dev-tables.h"
> #include "hw/nvram/fw_cfg.h"
> #include "hw/acpi/bios-linker-loader.h"
> #include "hw/loader.h"
> @@ -1377,6 +1378,7 @@ void acpi_build(PcGuestInfo *guest_info, AcpiBuildTables *tables)
> AcpiMcfgInfo mcfg;
> PcPciInfo pci;
> uint8_t *u;
> + struct acpi_dev_table *dt;
> size_t aml_len = 0;
> GArray *tables_blob = tables->table_data;
>
> @@ -1448,6 +1450,21 @@ void acpi_build(PcGuestInfo *guest_info, AcpiBuildTables *tables)
> build_dmar_q35(tables_blob, tables->linker);
> }
>
> + /* Add tables from devices. */
> + for (dt = acpi_dev_table_first(); dt; dt = acpi_dev_table_next(dt)) {
> + unsigned len = acpi_dev_table_len(dt);
> + void *data = acpi_dev_table_data(dt);
> +
> + acpi_add_table(table_offsets, tables_blob);
> + acpi_data_push(tables_blob, sizeof(AcpiTableHeader));
> + g_array_append_vals(tables_blob, data, len);
> + build_header(tables->linker, tables_blob,
> + (void *)(tables_blob->data + tables_blob->len -
> + len - sizeof(AcpiTableHeader)),
> + acpi_dev_table_sig(dt), len + sizeof(AcpiTableHeader),
> + acpi_dev_table_rev(dt));
> + }
> +
> /* Add tables supplied by user (if any) */
> for (u = acpi_table_first(); u; u = acpi_table_next(u)) {
> unsigned len = acpi_table_len(u);
> diff --git a/include/hw/acpi/acpi-dev-tables.h b/include/hw/acpi/acpi-dev-tables.h
> new file mode 100644
> index 0000000..6dd18a5
> --- /dev/null
> +++ b/include/hw/acpi/acpi-dev-tables.h
> @@ -0,0 +1,38 @@
> +/*
> + * Add and get ACPI tables registered by devices.
> + *
> + * Copyright (C) 2015 Corey Minyard <cminyard@mvista.com>
> + *
> + * This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Lesser General Public
> + * License version 2 as published by the Free Software Foundation.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * Lesser General Public License for more details.
> + *
> + * You should have received a copy of the GNU Lesser General Public
> + * License along with this library; if not, see <http://www.gnu.org/licenses/>
> + *
> + * Contributions after 2012-01-13 are licensed under the terms of the
> + * GNU GPL, version 2 or (at your option) any later version.
> + */
> +
> +#ifndef QEMU_HW_ACPI_HOOKS_H
> +#define QEMU_HW_ACPI_HOOKS_H
> +
> +#include <hw/acpi/aml-build.h>
> +
> +void add_acpi_dev_table(void *data, int size, const char *sig, uint8_t rev);
> +
> +struct acpi_dev_table;
> +
> +struct acpi_dev_table *acpi_dev_table_first(void);
> +struct acpi_dev_table *acpi_dev_table_next(struct acpi_dev_table *current);
> +uint8_t *acpi_dev_table_data(struct acpi_dev_table *);
> +unsigned acpi_dev_table_len(struct acpi_dev_table *);
> +const char *acpi_dev_table_sig(struct acpi_dev_table *);
> +uint8_t acpi_dev_table_rev(struct acpi_dev_table *);
> +
> +#endif /* QEMU_HW_ACPI_HOOKS_H */
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [Qemu-devel] [PATCH v3 15/16] ipmi: Add ACPI table entries
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 15/16] ipmi: Add ACPI table entries minyard
@ 2015-07-07 9:47 ` Igor Mammedov
0 siblings, 0 replies; 31+ messages in thread
From: Igor Mammedov @ 2015-07-07 9:47 UTC (permalink / raw)
To: minyard; +Cc: Corey Minyard, qemu-devel
On Mon, 8 Jun 2015 20:12:10 -0500
minyard@acm.org wrote:
> From: Corey Minyard <cminyard@mvista.com>
>
> Use the new ACPI table construction tools to create an ACPI
> entry for IPMI.
Above doesn't tell what is purpose of patch.
It would be nice for commit message to describe what the patch
actually does with references to relevant specs.
> Signed-off-by: Corey Minyard <cminyard@mvista.com>
> Acked-by: Michael S. Tsirkin <mst@redhat.com>
> ---
> hw/ipmi/Makefile.objs | 1 +
> hw/ipmi/ipmi_acpi.c | 122 ++++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 123 insertions(+)
> create mode 100644 hw/ipmi/ipmi_acpi.c
>
> diff --git a/hw/ipmi/Makefile.objs b/hw/ipmi/Makefile.objs
> index 81fb8e7..a5ba7d5 100644
> --- a/hw/ipmi/Makefile.objs
> +++ b/hw/ipmi/Makefile.objs
> @@ -4,3 +4,4 @@ common-obj-$(CONFIG_IPMI_LOCAL) += ipmi_bmc_extern.o
> common-obj-$(CONFIG_ISA_IPMI_KCS) += isa_ipmi_kcs.o
> common-obj-$(CONFIG_ISA_IPMI_BT) += isa_ipmi_bt.o
> common-obj-$(call land,$(CONFIG_IPMI),$(CONFIG_SMBIOS)) += ipmi_smbios.o
> +common-obj-$(call land,$(CONFIG_IPMI),$(CONFIG_ACPI)) += ipmi_acpi.o
if device is planned to be used only with PC machine I'd suggest to
put below functions into hw/i386/acpi-build.c
but if there is plans to make it work with ARM target as well
then a more generic hw/acpi/ipmi_acpi.c would be more suitable.
> diff --git a/hw/ipmi/ipmi_acpi.c b/hw/ipmi/ipmi_acpi.c
> new file mode 100644
> index 0000000..28ddbe4
> --- /dev/null
> +++ b/hw/ipmi/ipmi_acpi.c
> @@ -0,0 +1,122 @@
> +/*
> + * IPMI ACPI firmware handling
> + *
> + * Copyright (c) 2015 Corey Minyard, MontaVista Software, LLC
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a copy
> + * of this software and associated documentation files (the "Software"), to deal
> + * in the Software without restriction, including without limitation the rights
> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> + * copies of the Software, and to permit persons to whom the Software is
> + * furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> + * THE SOFTWARE.
> + */
> +
> +#include "hw/ipmi/ipmi.h"
> +#include "hw/acpi/aml-build.h"
> +#include "hw/acpi/acpi.h"
> +#include "hw/acpi/acpi-dev-tables.h"
> +#include <qemu/error-report.h>
> +
> +static Aml *aml_ipmi_crs(IPMIFwInfo *info)
> +{
> + Aml *crs = aml_resource_template();
> + uint8_t regspacing = info->register_spacing;
> +
> + if (regspacing == 1) {
> + regspacing = 0;
> + }
what's is purpose of ^^^ ???
Is it used but other code than ACPI, if not then just drop it and
hardcode it here naming it according to field it's used for (i.e. alignment)
> +
> + switch (info->memspace) {
> + case IPMI_MEMSPACE_IO:
> + aml_append(crs, aml_io(aml_decode16, info->base_address,
> + info->base_address + info->register_length - 1
> + regspacing, info->register_length));
> + break;
> + case IPMI_MEMSPACE_MEM32:
> + aml_append(crs,
> + aml_dword_memory(aml_pos_decode,
> + aml_min_fixed, aml_max_fixed,
> + aml_non_cacheable, aml_ReadWrite,
> + 0xffffffff,
> + info->base_address,
> + info->base_address + info->register_length - 1,
> + regspacing, info->register_length));
> + break;
> + case IPMI_MEMSPACE_MEM64:
> + aml_append(crs,
> + aml_qword_memory(aml_pos_decode,
> + aml_min_fixed, aml_max_fixed,
> + aml_non_cacheable, aml_ReadWrite,
> + 0xffffffffffffffffULL,
> + info->base_address,
> + info->base_address + info->register_length - 1,
> + regspacing, info->register_length));
> + break;
> + case IPMI_MEMSPACE_SMBUS:
> + aml_append(crs, aml_return(aml_int(info->base_address)));
> + break;
> + }
does device support reprogramming of "base_address" or is it fixed?
+ case for default with abort()
> +
> + if (info->interrupt_number) {
> + aml_append(crs, aml_irq_no_flags(info->interrupt_number));
> + }
> +
> + return crs;
> +}
> +
> +static void
> +ipmi_encode_one_acpi(IPMIFwInfo *info, void *opaque)
> +{
> + Aml *ssdt, *scope, *dev, *method;
> + char *name;
> + int version = ((info->ipmi_spec_major_revision << 8)
s/int/uint16_t/
> + | (info->ipmi_spec_minor_revision << 4));
> +
> + if (!info->acpi_parent) {
point of attaching should be defined here and not by device, hence I'd drop this hunk
> + ipmi_debug("device %s not compatible with ACPI, no parent given.",
> + info->interface_name);
> + return;
> + }
> +
> + ssdt = init_aml_allocator();
drop this and just call this function directly from build_ssdt()
> +
> + scope = aml_scope("%s", info->acpi_parent);
> + name = g_strdup_printf("ipmi_%s", info->interface_name);
I don't see 'name' being reused neither freed,
just do below
..."_STR", aml_string("ipmi_%s", info->interface_name)...
> +
> + dev = aml_device("MI0");
> + aml_append(dev, aml_name_decl("_HID", aml_eisaid("IPI0001")));
> + aml_append(dev, aml_name_decl("_STR", aml_string("%s", name)));
> + aml_append(dev, aml_name_decl("_UID", aml_int(0)));
since it's the only device there is no need to provide UUID,
if there could be more than one BMCs than this part is wrong.
> + aml_append(dev, aml_name_decl("_CRS", aml_ipmi_crs(info)));
> + method = aml_method("_IFT", 0);
> + aml_append(method, aml_return(aml_int(info->interface_type)));
> + aml_append(dev, method);
> + method = aml_method("_SRV", 0);
> + aml_append(method, aml_return(aml_int(version)));
Is there a specific need to use methods for _IFT/SRV objects,
since they just return a value and don't do anything else, I'd suggest to
use named variables (i.e. aml_name_decl())
> + aml_append(dev, method);
> +
> + aml_append(scope, dev);
> +
> + aml_append(ssdt, scope);
> +
> + add_acpi_dev_table(ssdt->buf->data, ssdt->buf->len, "SSDT", 1);
> + free_aml_allocator();
> +}
> +
> +static void ipmi_acpi_init(void)
> +{
> + ipmi_register_fwinfo_handler(ipmi_encode_one_acpi, NULL);
> +}
> +
> +type_init(ipmi_acpi_init);
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [Qemu-devel] [PATCH v3 14/16] acpi: Add a way for devices to add ACPI tables
2015-07-07 8:08 ` Igor Mammedov
@ 2015-07-08 17:44 ` Paolo Bonzini
2015-07-08 19:26 ` Igor Mammedov
0 siblings, 1 reply; 31+ messages in thread
From: Paolo Bonzini @ 2015-07-08 17:44 UTC (permalink / raw)
To: Igor Mammedov, minyard; +Cc: Corey Minyard, qemu-devel
On 07/07/2015 10:08, Igor Mammedov wrote:
> > Some devices, like IPMI, need to add ACPI table entries to report
> > their presence. Add a method for adding these entries.
>
> I think that it's not up to device to define in which table/scope
> it's entries should be but rather upto a board/platform to decide.
>
> I'd prefer the old way of adding device's ACPI AML into existing
> SSDT
This was suggested by Michael, so I think you should read the reviews of
earlier versions first.
Paolo
, like we do for every other device that needs it
> (for example: pvpanic).
> That allows to keep ACPI code in one place and for each platform
> to decide to which table put a device description and where exactly
> it should be.
>
> So I'd drop this patch and add function that returns non NULL
> "IPMIFwInfo *" if IPMI device is present and use slightly modified
> 15/16 to add device entry into the existing SSDT.
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [Qemu-devel] [PATCH v3 14/16] acpi: Add a way for devices to add ACPI tables
2015-07-08 17:44 ` Paolo Bonzini
@ 2015-07-08 19:26 ` Igor Mammedov
2015-07-08 20:39 ` Paolo Bonzini
0 siblings, 1 reply; 31+ messages in thread
From: Igor Mammedov @ 2015-07-08 19:26 UTC (permalink / raw)
To: Paolo Bonzini; +Cc: Corey Minyard, qemu-devel, minyard
On Wed, 8 Jul 2015 19:44:16 +0200
Paolo Bonzini <pbonzini@redhat.com> wrote:
>
>
> On 07/07/2015 10:08, Igor Mammedov wrote:
> > > Some devices, like IPMI, need to add ACPI table entries to report
> > > their presence. Add a method for adding these entries.
> >
> > I think that it's not up to device to define in which table/scope
> > it's entries should be but rather upto a board/platform to decide.
> >
> > I'd prefer the old way of adding device's ACPI AML into existing
> > SSDT
>
> This was suggested by Michael, so I think you should read the reviews
> of earlier versions first.
That is basically the same as hooks in v1 only the other way around
with all drawbacks attached.
Just dropping this universal way to scatter ACPI code all over QEMU
and calling ipmi_encode_one_acpi() "[15/16] ipmi: Add ACPI table entries"
directly from build_ssdt() would simplify series quite a bit.
I'd do the same for SMBIOS entries as well, i.e. drop similar
universal way for devices to supply SMBIOS info (it's not their
business) and just call ipmi_encode_one_smbios() to add ipmi specific
entry if device is present. Again simplifying series even more.
that roughly would save us 300 lines of not really necessary code
and keep things consistent with a way we are managing ssdt now.
>
> Paolo
>
> , like we do for every other device that needs it
> > (for example: pvpanic).
> > That allows to keep ACPI code in one place and for each platform
> > to decide to which table put a device description and where exactly
> > it should be.
> >
> > So I'd drop this patch and add function that returns non NULL
> > "IPMIFwInfo *" if IPMI device is present and use slightly modified
> > 15/16 to add device entry into the existing SSDT.
>
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [Qemu-devel] [PATCH v3 14/16] acpi: Add a way for devices to add ACPI tables
2015-07-08 19:26 ` Igor Mammedov
@ 2015-07-08 20:39 ` Paolo Bonzini
2015-07-09 8:25 ` Igor Mammedov
0 siblings, 1 reply; 31+ messages in thread
From: Paolo Bonzini @ 2015-07-08 20:39 UTC (permalink / raw)
To: Igor Mammedov; +Cc: Corey Minyard, qemu-devel, minyard
On 08/07/2015 21:26, Igor Mammedov wrote:
> > This was suggested by Michael, so I think you should read the reviews
> > of earlier versions first.
>
> That is basically the same as hooks in v1 only the other way around
> with all drawbacks attached.
>
> Just dropping this universal way to scatter ACPI code all over QEMU
> and calling ipmi_encode_one_acpi() "[15/16] ipmi: Add ACPI table entries"
> directly from build_ssdt() would simplify series quite a bit.
On the other hand, it would be much harder to make IPMI optional unless
you want to add a bunch of ugly stubs. Same for SMBIOS. Especially
when you can have the same ACPI and SMBIOS tables in both x86 and ARM
virtual machines, it becomes a little more the device business to
provide ACPI and SMBIOS information.
So overall I'm happy with the way it was done here. I and Michael
disagreed on several details, but not enough to fight over it...
Paolo
> I'd do the same for SMBIOS entries as well, i.e. drop similar
> universal way for devices to supply SMBIOS info (it's not their
> business) and just call ipmi_encode_one_smbios() to add ipmi specific
> entry if device is present. Again simplifying series even more.
>
> that roughly would save us 300 lines of not really necessary code
> and keep things consistent with a way we are managing ssdt now.
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [Qemu-devel] [PATCH v3 14/16] acpi: Add a way for devices to add ACPI tables
2015-07-08 20:39 ` Paolo Bonzini
@ 2015-07-09 8:25 ` Igor Mammedov
2015-07-13 21:55 ` Corey Minyard
0 siblings, 1 reply; 31+ messages in thread
From: Igor Mammedov @ 2015-07-09 8:25 UTC (permalink / raw)
To: Paolo Bonzini; +Cc: Corey Minyard, qemu-devel, minyard
On Wed, 8 Jul 2015 22:39:24 +0200
Paolo Bonzini <pbonzini@redhat.com> wrote:
>
>
> On 08/07/2015 21:26, Igor Mammedov wrote:
> > > This was suggested by Michael, so I think you should read the reviews
> > > of earlier versions first.
> >
> > That is basically the same as hooks in v1 only the other way around
> > with all drawbacks attached.
> >
> > Just dropping this universal way to scatter ACPI code all over QEMU
> > and calling ipmi_encode_one_acpi() "[15/16] ipmi: Add ACPI table entries"
> > directly from build_ssdt() would simplify series quite a bit.
>
> On the other hand, it would be much harder to make IPMI optional unless
> you want to add a bunch of ugly stubs. Same for SMBIOS. Especially
it's no the case if one uses QOM properties to fetch info.
it's a bit verbose but works well without need for ugly stubs.
> when you can have the same ACPI and SMBIOS tables in both x86 and ARM
> virtual machines, it becomes a little more the device business to
> provide ACPI and SMBIOS information.
For a generic way for device to supply information to ACPI,
I was thinking about introducing interface that device might implement
for example if it should have _CRS in its ACPI description.
Then APCI core could query for devices that implement interface
and build AML code based on resource values (i.e. base address,
size, irq #, e.t.c) it gets from device.
> So overall I'm happy with the way it was done here. I and Michael
> disagreed on several details, but not enough to fight over it...
I won't fight over it either, but it's my opinion how it should be
done.
>
> Paolo
>
> > I'd do the same for SMBIOS entries as well, i.e. drop similar
> > universal way for devices to supply SMBIOS info (it's not their
> > business) and just call ipmi_encode_one_smbios() to add ipmi specific
> > entry if device is present. Again simplifying series even more.
> >
> > that roughly would save us 300 lines of not really necessary code
> > and keep things consistent with a way we are managing ssdt now.
>
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [Qemu-devel] [PATCH v3 14/16] acpi: Add a way for devices to add ACPI tables
2015-07-09 8:25 ` Igor Mammedov
@ 2015-07-13 21:55 ` Corey Minyard
2015-07-14 7:36 ` Igor Mammedov
0 siblings, 1 reply; 31+ messages in thread
From: Corey Minyard @ 2015-07-13 21:55 UTC (permalink / raw)
To: Igor Mammedov, Paolo Bonzini; +Cc: Corey Minyard, qemu-devel
On 07/09/2015 03:25 AM, Igor Mammedov wrote:
> On Wed, 8 Jul 2015 22:39:24 +0200
> Paolo Bonzini <pbonzini@redhat.com> wrote:
>
>>
>> On 08/07/2015 21:26, Igor Mammedov wrote:
>>>> This was suggested by Michael, so I think you should read the reviews
>>>> of earlier versions first.
>>> That is basically the same as hooks in v1 only the other way around
>>> with all drawbacks attached.
>>>
>>> Just dropping this universal way to scatter ACPI code all over QEMU
>>> and calling ipmi_encode_one_acpi() "[15/16] ipmi: Add ACPI table entries"
>>> directly from build_ssdt() would simplify series quite a bit.
>> On the other hand, it would be much harder to make IPMI optional unless
>> you want to add a bunch of ugly stubs. Same for SMBIOS. Especially
> it's no the case if one uses QOM properties to fetch info.
> it's a bit verbose but works well without need for ugly stubs.
>
>> when you can have the same ACPI and SMBIOS tables in both x86 and ARM
>> virtual machines, it becomes a little more the device business to
>> provide ACPI and SMBIOS information.
> For a generic way for device to supply information to ACPI,
> I was thinking about introducing interface that device might implement
> for example if it should have _CRS in its ACPI description.
> Then APCI core could query for devices that implement interface
> and build AML code based on resource values (i.e. base address,
> size, irq #, e.t.c) it gets from device.
I'm just getting back from vacation and catching up.
I would agree that implementing an interface is a more consistent
way to do this than the way it's done now. If it's ok with everyone,
I'll work on implementing this.
I'm not sure that resource values are enough to do this, though.
IPMI has some custom fields (_IFT, _SRV, _STR) and lots of optional
fields (_ADR, _UID, _STA), how would you do these fields?
-corey
>
>> So overall I'm happy with the way it was done here. I and Michael
>> disagreed on several details, but not enough to fight over it...
> I won't fight over it either, but it's my opinion how it should be
> done.
>
>> Paolo
>>
>>> I'd do the same for SMBIOS entries as well, i.e. drop similar
>>> universal way for devices to supply SMBIOS info (it's not their
>>> business) and just call ipmi_encode_one_smbios() to add ipmi specific
>>> entry if device is present. Again simplifying series even more.
>>>
>>> that roughly would save us 300 lines of not really necessary code
>>> and keep things consistent with a way we are managing ssdt now.
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [Qemu-devel] [PATCH v3 14/16] acpi: Add a way for devices to add ACPI tables
2015-07-13 21:55 ` Corey Minyard
@ 2015-07-14 7:36 ` Igor Mammedov
0 siblings, 0 replies; 31+ messages in thread
From: Igor Mammedov @ 2015-07-14 7:36 UTC (permalink / raw)
To: Corey Minyard; +Cc: Paolo Bonzini, qemu-devel, Corey Minyard
On Mon, 13 Jul 2015 16:55:29 -0500
Corey Minyard <minyard@acm.org> wrote:
> On 07/09/2015 03:25 AM, Igor Mammedov wrote:
> > On Wed, 8 Jul 2015 22:39:24 +0200
> > Paolo Bonzini <pbonzini@redhat.com> wrote:
> >
> >>
> >> On 08/07/2015 21:26, Igor Mammedov wrote:
> >>>> This was suggested by Michael, so I think you should read the reviews
> >>>> of earlier versions first.
> >>> That is basically the same as hooks in v1 only the other way around
> >>> with all drawbacks attached.
> >>>
> >>> Just dropping this universal way to scatter ACPI code all over QEMU
> >>> and calling ipmi_encode_one_acpi() "[15/16] ipmi: Add ACPI table entries"
> >>> directly from build_ssdt() would simplify series quite a bit.
> >> On the other hand, it would be much harder to make IPMI optional unless
> >> you want to add a bunch of ugly stubs. Same for SMBIOS. Especially
> > it's no the case if one uses QOM properties to fetch info.
> > it's a bit verbose but works well without need for ugly stubs.
> >
> >> when you can have the same ACPI and SMBIOS tables in both x86 and ARM
> >> virtual machines, it becomes a little more the device business to
> >> provide ACPI and SMBIOS information.
> > For a generic way for device to supply information to ACPI,
> > I was thinking about introducing interface that device might implement
> > for example if it should have _CRS in its ACPI description.
> > Then APCI core could query for devices that implement interface
> > and build AML code based on resource values (i.e. base address,
> > size, irq #, e.t.c) it gets from device.
>
> I'm just getting back from vacation and catching up.
>
> I would agree that implementing an interface is a more consistent
> way to do this than the way it's done now. If it's ok with everyone,
> I'll work on implementing this.
Implementing interface shouldn't block this series.
I'm ok with this series ACPI wise if you drop 14/16 and do as suggested
above + address comment on 15/16.
It would require minimal changes and get us an interesting device
to play with without significant delays.
I would do the same with SMBIOS side as well.
Implementing interface could be made on top along with conversion
of current code that fetches resource info from devices manually.
>
> I'm not sure that resource values are enough to do this, though.
> IPMI has some custom fields (_IFT, _SRV, _STR) and lots of optional
> fields (_ADR, _UID, _STA), how would you do these fields?
fields names are part of ACPI spec,
maybe interface should have methods for returning these fields.
_ADR - for example for PCI devices should address of device on bus
_SRV - return packed revision number
_IFT - return interface number
_STR, _UID, _STA - I'd leave them to board/firmware to decide how to
name/enumerate/detect presence (i.e. in acpi-build.c)
>
> -corey
>
> >
> >> So overall I'm happy with the way it was done here. I and Michael
> >> disagreed on several details, but not enough to fight over it...
> > I won't fight over it either, but it's my opinion how it should be
> > done.
> >
> >> Paolo
> >>
> >>> I'd do the same for SMBIOS entries as well, i.e. drop similar
> >>> universal way for devices to supply SMBIOS info (it's not their
> >>> business) and just call ipmi_encode_one_smbios() to add ipmi specific
> >>> entry if device is present. Again simplifying series even more.
> >>>
> >>> that roughly would save us 300 lines of not really necessary code
> >>> and keep things consistent with a way we are managing ssdt now.
>
^ permalink raw reply [flat|nested] 31+ messages in thread
end of thread, other threads:[~2015-07-14 7:36 UTC | newest]
Thread overview: 31+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-06-09 1:11 [Qemu-devel] [PATCH v3 00/16] Add an IPMI device to QEMU minyard
2015-06-09 1:11 ` [Qemu-devel] [PATCH v3 01/16] Add a base IPMI interface minyard
2015-06-09 1:11 ` [Qemu-devel] [PATCH v3 02/16] ipmi: Add a local BMC simulation minyard
2015-06-09 1:11 ` [Qemu-devel] [PATCH v3 03/16] ipmi: Add an external connection simulation interface minyard
2015-06-09 1:11 ` [Qemu-devel] [PATCH v3 04/16] ipmi: Add an ISA KCS low-level interface minyard
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 05/16] ipmi: Add a BT " minyard
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 06/16] ipmi: Add tests minyard
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 07/16] ipmi: Add documentation minyard
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 08/16] ipmi: Add migration capability to the IPMI devices minyard
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 09/16] ipmi: Add a firmware configuration repository minyard
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 10/16] ipmi: Add firmware registration to the ISA interface minyard
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 11/16] smbios: Add a function to directly add an entry minyard
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 12/16] pc: Postpone SMBIOS table installation to post machine init minyard
2015-07-03 8:17 ` Michael S. Tsirkin
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 13/16] ipmi: Add SMBIOS table entry minyard
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 14/16] acpi: Add a way for devices to add ACPI tables minyard
2015-07-03 8:21 ` Michael S. Tsirkin
2015-07-03 8:27 ` Michael S. Tsirkin
2015-07-07 8:08 ` Igor Mammedov
2015-07-08 17:44 ` Paolo Bonzini
2015-07-08 19:26 ` Igor Mammedov
2015-07-08 20:39 ` Paolo Bonzini
2015-07-09 8:25 ` Igor Mammedov
2015-07-13 21:55 ` Corey Minyard
2015-07-14 7:36 ` Igor Mammedov
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 15/16] ipmi: Add ACPI table entries minyard
2015-07-07 9:47 ` Igor Mammedov
2015-06-09 1:12 ` [Qemu-devel] [PATCH v3 16/16] bios: Add tests for the IPMI ACPI and SMBIOS entries minyard
2015-07-03 0:30 ` [Qemu-devel] [PATCH v3 00/16] Add an IPMI device to QEMU Benjamin Herrenschmidt
2015-07-03 6:50 ` Paolo Bonzini
2015-07-03 8:23 ` Michael S. Tsirkin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).