From: zhanghailiang <zhang.zhanghailiang@huawei.com>
To: "Dr. David Alan Gilbert (git)" <dgilbert@redhat.com>,
qemu-devel@nongnu.org
Cc: amit.shah@redhat.com, peter.huangpeng@huawei.com, quintela@redhat.com
Subject: Re: [Qemu-devel] [PATCH 2/5] Split out end of migration code from migration_thread
Date: Thu, 13 Aug 2015 20:14:17 +0800 [thread overview]
Message-ID: <55CC8A19.2070505@huawei.com> (raw)
In-Reply-To: <1439463094-5394-3-git-send-email-dgilbert@redhat.com>
On 2015/8/13 18:51, Dr. David Alan Gilbert (git) wrote:
> From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
>
> The code that gets run at the end of the migration process
> is getting large, and I'm about to add more for postcopy.
> Split it into a separate function.
>
> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
> ---
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
> migration/migration.c | 75 ++++++++++++++++++++++++++++++++-------------------
> trace-events | 2 ++
> 2 files changed, 49 insertions(+), 28 deletions(-)
>
> diff --git a/migration/migration.c b/migration/migration.c
> index 662e77e..46bb410 100644
> --- a/migration/migration.c
> +++ b/migration/migration.c
> @@ -913,6 +913,50 @@ int64_t migrate_xbzrle_cache_size(void)
> return s->xbzrle_cache_size;
> }
>
> +/**
> + * migration_completion: Used by migration_thread when there's not much left.
> + * The caller 'breaks' the loop when this returns.
> + *
> + * @s: Current migration state
> + * @*old_vm_running: Pointer to old_vm_running flag
> + * @*start_time: Pointer to time to update
> + */
> +static void migration_completion(MigrationState *s, bool *old_vm_running,
> + int64_t *start_time)
> +{
> + int ret;
> +
> + qemu_mutex_lock_iothread();
> + *start_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
> + qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER);
> + *old_vm_running = runstate_is_running();
> +
> + ret = global_state_store();
> + if (!ret) {
> + ret = vm_stop_force_state(RUN_STATE_FINISH_MIGRATE);
> + if (ret >= 0) {
> + qemu_file_set_rate_limit(s->file, INT64_MAX);
> + qemu_savevm_state_complete(s->file);
> + }
> + }
> + qemu_mutex_unlock_iothread();
> +
> + if (ret < 0) {
> + goto fail;
> + }
> +
> + if (qemu_file_get_error(s->file)) {
> + trace_migration_completion_file_err();
> + goto fail;
> + }
> +
> + migrate_set_state(s, MIGRATION_STATUS_ACTIVE, MIGRATION_STATUS_COMPLETED);
> + return;
> +
> +fail:
> + migrate_set_state(s, MIGRATION_STATUS_ACTIVE, MIGRATION_STATUS_FAILED);
> +}
> +
> /* migration thread support */
>
> static void *migration_thread(void *opaque)
> @@ -943,34 +987,9 @@ static void *migration_thread(void *opaque)
> if (pending_size && pending_size >= max_size) {
> qemu_savevm_state_iterate(s->file);
> } else {
> - int ret;
> -
> - qemu_mutex_lock_iothread();
> - start_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
> - qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER);
> - old_vm_running = runstate_is_running();
> -
> - ret = global_state_store();
> - if (!ret) {
> - ret = vm_stop_force_state(RUN_STATE_FINISH_MIGRATE);
> - if (ret >= 0) {
> - qemu_file_set_rate_limit(s->file, INT64_MAX);
> - qemu_savevm_state_complete(s->file);
> - }
> - }
> - qemu_mutex_unlock_iothread();
> -
> - if (ret < 0) {
> - migrate_set_state(s, MIGRATION_STATUS_ACTIVE,
> - MIGRATION_STATUS_FAILED);
> - break;
> - }
> -
> - if (!qemu_file_get_error(s->file)) {
> - migrate_set_state(s, MIGRATION_STATUS_ACTIVE,
> - MIGRATION_STATUS_COMPLETED);
> - break;
> - }
> + trace_migration_thread_low_pending(pending_size);
> + migration_completion(s, &old_vm_running, &start_time);
> + break;
> }
> }
>
> diff --git a/trace-events b/trace-events
> index 94bf3bb..1509e5b 100644
> --- a/trace-events
> +++ b/trace-events
> @@ -1406,6 +1406,8 @@ migrate_transferred(uint64_t tranferred, uint64_t time_spent, double bandwidth,
> migrate_state_too_big(void) ""
> migrate_global_state_post_load(const char *state) "loaded state: %s"
> migrate_global_state_pre_save(const char *state) "saved state: %s"
> +migration_completion_file_err(void) ""
> +migration_thread_low_pending(uint64_t pending) "%" PRIu64
>
> # migration/rdma.c
> qemu_rdma_accept_incoming_migration(void) ""
>
next prev parent reply other threads:[~2015-08-13 12:15 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-13 10:51 [Qemu-devel] [PATCH 0/5] Migration cleanups Dr. David Alan Gilbert (git)
2015-08-13 10:51 ` [Qemu-devel] [PATCH 1/5] migration/ram.c: Use RAMBlock rather than MemoryRegion Dr. David Alan Gilbert (git)
2015-08-13 12:46 ` Paolo Bonzini
2015-09-15 10:43 ` Amit Shah
2015-08-13 10:51 ` [Qemu-devel] [PATCH 2/5] Split out end of migration code from migration_thread Dr. David Alan Gilbert (git)
2015-08-13 12:14 ` zhanghailiang [this message]
2015-09-15 11:12 ` Amit Shah
2015-08-13 10:51 ` [Qemu-devel] [PATCH 3/5] Init page sizes in qtest Dr. David Alan Gilbert (git)
2015-08-13 10:51 ` [Qemu-devel] [PATCH 4/5] migration: size_t'ify some of qemu-file Dr. David Alan Gilbert (git)
2015-08-13 12:15 ` zhanghailiang
2015-09-15 11:39 ` Amit Shah
2015-08-13 10:51 ` [Qemu-devel] [PATCH 5/5] migration: qemu-file more size_t'ifying Dr. David Alan Gilbert (git)
2015-08-13 12:15 ` zhanghailiang
2015-09-15 11:42 ` Amit Shah
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55CC8A19.2070505@huawei.com \
--to=zhang.zhanghailiang@huawei.com \
--cc=amit.shah@redhat.com \
--cc=dgilbert@redhat.com \
--cc=peter.huangpeng@huawei.com \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).