From: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
To: Cormac O'Brien <cormac@c-obrien.org>,
agraf@suse.de, qemu-devel@nongnu.org, qemu-ppc@nongnu.org
Subject: Re: [Qemu-devel] [PATCH RFC 4/4] PPC: fix CUDA packet header size
Date: Sun, 23 Aug 2015 14:03:44 +0100 [thread overview]
Message-ID: <55D9C4B0.10402@ilande.co.uk> (raw)
In-Reply-To: <1440257533-1504-5-git-send-email-cormac@c-obrien.org>
On 22/08/15 16:32, Cormac O'Brien wrote:
> Change the CUDA packet model to use a three-byte header as in real hardware.
> Also add handlers for CUDA_COMBINED_FORMAT_IIC and CUDA_GET_SET_IIC.
I think it would make sense to split this patch into 2 - one for the
CUDA packet changes, and another to add the *_IIC handlers.
> Signed-off-by: Cormac O'Brien <cormac@c-obrien.org>
> ---
> hw/input/adb.c | 2 +-
> hw/misc/macio/cuda.c | 54 ++++++++++++++++++++++++++++++----------------------
> 2 files changed, 32 insertions(+), 24 deletions(-)
>
> diff --git a/hw/input/adb.c b/hw/input/adb.c
> index a18eea2..4834234 100644
> --- a/hw/input/adb.c
> +++ b/hw/input/adb.c
> @@ -84,7 +84,7 @@ int adb_request(ADBBusState *s, uint8_t *obuf, const uint8_t *buf, int len)
> return adc->devreq(d, obuf, buf, len);
> }
> }
> - return ADB_RET_NOTPRESENT;
> + return 0; //ADB_RET_NOTPRESENT;
Does this need another constant defined rather than just using 0?
> }
>
> /* XXX: move that to cuda ? */
> diff --git a/hw/misc/macio/cuda.c b/hw/misc/macio/cuda.c
> index f3984e3..753b5f3 100644
> --- a/hw/misc/macio/cuda.c
> +++ b/hw/misc/macio/cuda.c
> @@ -480,7 +480,7 @@ static void cuda_adb_poll(void *opaque)
> static void cuda_receive_packet(CUDAState *s,
> const uint8_t *data, int len)
> {
> - uint8_t obuf[16];
> + uint8_t obuf[16] = { CUDA_PACKET, 0, data[0] };
> int autopoll;
> uint32_t ti;
>
> @@ -497,23 +497,16 @@ static void cuda_receive_packet(CUDAState *s,
> timer_del(s->adb_poll_timer);
> }
> }
> - obuf[0] = CUDA_PACKET;
> - obuf[1] = data[1];
> - cuda_send_packet_to_host(s, obuf, 2);
> + //obuf[1] = data[1];
> + cuda_send_packet_to_host(s, obuf, 3);
> break;
> case CUDA_SET_TIME:
> ti = (((uint32_t)data[1]) << 24) + (((uint32_t)data[2]) << 16) + (((uint32_t)data[3]) << 8) + data[4];
> s->tick_offset = ti - (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) / get_ticks_per_sec());
> - obuf[0] = CUDA_PACKET;
> - obuf[1] = 0;
> - obuf[2] = 0;
> cuda_send_packet_to_host(s, obuf, 3);
> break;
> case CUDA_GET_TIME:
> ti = s->tick_offset + (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) / get_ticks_per_sec());
> - obuf[0] = CUDA_PACKET;
> - obuf[1] = 0;
> - obuf[2] = 0;
> obuf[3] = ti >> 24;
> obuf[4] = ti >> 16;
> obuf[5] = ti >> 8;
> @@ -524,23 +517,36 @@ static void cuda_receive_packet(CUDAState *s,
> case CUDA_SET_DEVICE_LIST:
> case CUDA_SET_AUTO_RATE:
> case CUDA_SET_POWER_MESSAGES:
> - obuf[0] = CUDA_PACKET;
> - obuf[1] = 0;
> - cuda_send_packet_to_host(s, obuf, 2);
> + cuda_send_packet_to_host(s, obuf, 3);
> break;
> case CUDA_POWERDOWN:
> - obuf[0] = CUDA_PACKET;
> - obuf[1] = 0;
> - cuda_send_packet_to_host(s, obuf, 2);
> + cuda_send_packet_to_host(s, obuf, 3);
> qemu_system_shutdown_request();
> break;
> case CUDA_RESET_SYSTEM:
> - obuf[0] = CUDA_PACKET;
> - obuf[1] = 0;
> - cuda_send_packet_to_host(s, obuf, 2);
> + cuda_send_packet_to_host(s, obuf, 3);
> qemu_system_reset_request();
> break;
> + case CUDA_COMBINED_FORMAT_IIC:
> + obuf[0] = ERROR_PACKET;
> + obuf[1] = 0x5;
> + obuf[2] = CUDA_PACKET;
> + obuf[3] = data[0];
> + cuda_send_packet_to_host(s, obuf, 4);
> + break;
> + case CUDA_GET_SET_IIC:
> + if (len == 4) {
> + cuda_send_packet_to_host(s, obuf, 3);
> + } else {
> + obuf[0] = ERROR_PACKET;
> + obuf[1] = 0x2;
> + obuf[2] = CUDA_PACKET;
> + obuf[3] = data[0];
> + cuda_send_packet_to_host(s, obuf, 4);
> + }
> + break;
> default:
> + cuda_send_packet_to_host(s, obuf, 3);
> break;
> }
> }
> @@ -560,19 +566,21 @@ static void cuda_receive_packet_from_host(CUDAState *s,
> switch(data[0]) {
> case ADB_PACKET:
> {
> - uint8_t obuf[ADB_MAX_OUT_LEN + 2];
> + uint8_t obuf[ADB_MAX_OUT_LEN + 3];
> int olen;
> - olen = adb_request(&s->adb_bus, obuf + 2, data + 1, len - 1);
> - if (olen > 0) {
> + olen = adb_request(&s->adb_bus, obuf + 3, data + 1, len - 1);
> + if (olen >= 0) {
> obuf[0] = ADB_PACKET;
> obuf[1] = 0x00;
> + obuf[2] = data[1];
> } else {
> /* error */
> obuf[0] = ADB_PACKET;
> obuf[1] = -olen;
> + obuf[2] = data[1];
> olen = 0;
> }
> - cuda_send_packet_to_host(s, obuf, olen + 2);
> + cuda_send_packet_to_host(s, obuf, olen + 3);
> }
> break;
> case CUDA_PACKET:
>
With some further testing, it seems that this breaks darwinppc-602.iso
and OS X 10.2 on -M g3beige causing it to panic somewhere in the
AppleCuda module. I think splitting the patch as mentioned above would
help narrow down whether its the CUDA packet or the *_IIC changes in
particular which cause the issue.
Note that the source code for the AppleCuda module can be found at
http://www.opensource.apple.com/source/AppleCuda/AppleCuda-100.0.3/
which should further help too.
ATB,
Mark.
next prev parent reply other threads:[~2015-08-23 13:04 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-22 15:32 [Qemu-devel] [PATCH RFC 0/4] Mac OS 9 compatibility improvements Cormac O'Brien
2015-08-22 15:32 ` [Qemu-devel] [PATCH 1/4] PPC: Allow Rc bit to be set on mtspr Cormac O'Brien
2015-08-22 15:32 ` [Qemu-devel] [PATCH 2/4] PPC: Fix lsxw bounds checks Cormac O'Brien
2015-08-22 15:32 ` [Qemu-devel] [PATCH 3/4] PPC: mac99: Always add USB controller Cormac O'Brien
2015-08-22 15:32 ` [Qemu-devel] [PATCH RFC 4/4] PPC: fix CUDA packet header size Cormac O'Brien
2015-08-23 13:03 ` Mark Cave-Ayland [this message]
2015-08-23 12:31 ` [Qemu-devel] [PATCH RFC 0/4] Mac OS 9 compatibility improvements Mark Cave-Ayland
2015-09-11 5:27 ` [Qemu-devel] [Qemu-ppc] " Stewart Smith
2015-08-24 5:05 ` [Qemu-devel] " Alexander Graf
2015-08-24 5:20 ` Alexander Graf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55D9C4B0.10402@ilande.co.uk \
--to=mark.cave-ayland@ilande.co.uk \
--cc=agraf@suse.de \
--cc=cormac@c-obrien.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).