From: Paolo Bonzini <pbonzini@redhat.com>
To: "Emilio G. Cota" <cota@braap.org>,
qemu-devel@nongnu.org, mttcg@greensocs.com
Cc: guillaume.delbergue@greensocs.com, alex.bennee@linaro.org,
mark.burton@greensocs.com, a.rigo@virtualopensystems.com,
Frederic Konrad <fred.konrad@greensocs.com>
Subject: Re: [Qemu-devel] [RFC 35/38] cputlb: use cpu_tcg_sched_work for tlb_flush_all
Date: Sun, 23 Aug 2015 18:29:33 -0700 [thread overview]
Message-ID: <55DA737D.6040509@redhat.com> (raw)
In-Reply-To: <1440375847-17603-36-git-send-email-cota@braap.org>
On 23/08/2015 17:24, Emilio G. Cota wrote:
> Signed-off-by: Emilio G. Cota <cota@braap.org>
> ---
> cputlb.c | 41 +++++++++++------------------------------
> 1 file changed, 11 insertions(+), 30 deletions(-)
As suggested by me and Peter, synchronization on TLB flushes should be
arch-specific. CPUs can halt on a dmb if they have pending TLB flush
requests on other CPUs, and the CPU can be woken up from the run_on_cpu
callback with something like:
if (--caller_cpu->pending_tlb_flush_request) {
caller_cpu->interrupt_request |= CPU_INTERRUPT_TLB_DONE;
qemu_cpu_kick(caller_cpu);
}
...
static bool arm_cpu_has_work(CPUState *cs)
{
ARMCPU *cpu = ARM_CPU(cs);
return !cpu->pending_tlb_flush_request && !cpu->powered_off
&& cs->interrupt_request &
(CPU_INTERRUPT_FIQ | CPU_INTERRUPT_HARD
| CPU_INTERRUPT_VFIQ | CPU_INTERRUPT_VIRQ
| CPU_INTERRUPT_EXITTB | CPU_INTERRUPT_TLB_DONE);
}
Paolo
> diff --git a/cputlb.c b/cputlb.c
> index 1b3673e..d81a4eb 100644
> --- a/cputlb.c
> +++ b/cputlb.c
> @@ -73,43 +73,24 @@ void tlb_flush(CPUState *cpu, int flush_global)
> tlb_flush_count++;
> }
>
> -struct TLBFlushParams {
> - CPUState *cpu;
> - int flush_global;
> -};
> -
> -static void tlb_flush_async_work(void *opaque)
> +static void __tlb_flush_all(void *arg)
> {
> - struct TLBFlushParams *params = opaque;
> + CPUState *cpu;
> + int flush_global = *(int *)arg;
>
> - tlb_flush(params->cpu, params->flush_global);
> - g_free(params);
> + CPU_FOREACH(cpu) {
> + tlb_flush(cpu, flush_global);
> + }
> + g_free(arg);
> }
>
> void tlb_flush_all(int flush_global)
> {
> - CPUState *cpu;
> - struct TLBFlushParams *params;
> + int *arg = g_malloc(sizeof(*arg));
>
> -#if 0 /* MTTCG */
> - CPU_FOREACH(cpu) {
> - tlb_flush(cpu, flush_global);
> - }
> -#else
> - CPU_FOREACH(cpu) {
> - if (qemu_cpu_is_self(cpu)) {
> - /* async_run_on_cpu handle this case but this just avoid a malloc
> - * here.
> - */
> - tlb_flush(cpu, flush_global);
> - } else {
> - params = g_malloc(sizeof(struct TLBFlushParams));
> - params->cpu = cpu;
> - params->flush_global = flush_global;
> - async_run_on_cpu(cpu, tlb_flush_async_work, params);
> - }
> - }
> -#endif /* MTTCG */
> + *arg = flush_global;
> + tb_lock();
> + cpu_tcg_sched_work(current_cpu, __tlb_flush_all, arg);
> }
>
> static inline void tlb_flush_entry(CPUTLBEntry *tlb_entry, target_ulong addr)
>
next prev parent reply other threads:[~2015-08-24 1:31 UTC|newest]
Thread overview: 110+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-24 0:23 [Qemu-devel] [RFC 00/38] MTTCG: i386, user+system mode Emilio G. Cota
2015-08-24 0:23 ` [Qemu-devel] [RFC 01/38] cpu-exec: add missing mmap_lock in tb_find_slow Emilio G. Cota
2015-09-07 15:33 ` Alex Bennée
2015-08-24 0:23 ` [Qemu-devel] [RFC 02/38] hw/i386/kvmvapic: add missing include of tcg.h Emilio G. Cota
2015-09-07 15:49 ` Alex Bennée
2015-09-07 16:11 ` Paolo Bonzini
2015-08-24 0:23 ` [Qemu-devel] [RFC 03/38] cpu-exec: set current_cpu at cpu_exec() Emilio G. Cota
2015-08-24 1:03 ` Paolo Bonzini
2015-08-25 0:41 ` [Qemu-devel] [PATCH 1/4] cpus: add qemu_cpu_thread_init_common() to avoid code duplication Emilio G. Cota
2015-08-25 0:41 ` [Qemu-devel] [PATCH 2/4] linux-user: add helper to set current_cpu before cpu_loop() Emilio G. Cota
2015-08-25 0:41 ` [Qemu-devel] [PATCH 3/4] linux-user: call rcu_(un)register_thread on thread creation/deletion Emilio G. Cota
2015-08-26 0:22 ` Paolo Bonzini
2015-08-25 0:41 ` [Qemu-devel] [PATCH 4/4] bsd-user: add helper to set current_cpu before cpu_loop() Emilio G. Cota
2015-08-25 18:07 ` Emilio G. Cota
2015-08-24 0:23 ` [Qemu-devel] [RFC 04/38] translate-all: remove volatile from have_tb_lock Emilio G. Cota
2015-09-07 15:50 ` Alex Bennée
2015-09-07 16:12 ` Paolo Bonzini
2015-08-24 0:23 ` [Qemu-devel] [RFC 05/38] thread-posix: inline qemu_spin functions Emilio G. Cota
2015-08-24 1:04 ` Paolo Bonzini
2015-08-25 2:30 ` Emilio G. Cota
2015-08-25 19:30 ` Emilio G. Cota
2015-08-25 22:53 ` Paolo Bonzini
2015-08-24 0:23 ` [Qemu-devel] [RFC 06/38] seqlock: add missing 'inline' to seqlock_read_retry Emilio G. Cota
2015-09-07 15:50 ` Alex Bennée
2015-08-24 0:23 ` [Qemu-devel] [RFC 07/38] seqlock: read sequence number atomically Emilio G. Cota
2015-09-07 15:53 ` Alex Bennée
2015-09-07 16:13 ` Paolo Bonzini
2015-08-24 0:23 ` [Qemu-devel] [RFC 08/38] rcu: init rcu_registry_lock after fork Emilio G. Cota
2015-09-08 17:34 ` Alex Bennée
2015-09-08 19:03 ` Emilio G. Cota
2015-09-09 9:35 ` Alex Bennée
2015-08-24 0:23 ` [Qemu-devel] [RFC 09/38] rcu: fix comment with s/rcu_gp_lock/rcu_registry_lock/ Emilio G. Cota
2015-09-10 11:18 ` Alex Bennée
2015-08-24 0:23 ` [Qemu-devel] [RFC 10/38] translate-all: remove obsolete comment about l1_map Emilio G. Cota
2015-09-10 11:59 ` Alex Bennée
2015-08-24 0:23 ` [Qemu-devel] [RFC 11/38] qemu-thread: handle spurious futex_wait wakeups Emilio G. Cota
2015-09-10 13:22 ` Alex Bennée
2015-09-10 17:46 ` Emilio G. Cota
2015-08-24 0:23 ` [Qemu-devel] [RFC 12/38] linux-user: call rcu_(un)register_thread on pthread_(exit|create) Emilio G. Cota
2015-08-25 0:45 ` Emilio G. Cota
2015-08-24 0:23 ` [Qemu-devel] [RFC 13/38] cputlb: add physical address to CPUTLBEntry Emilio G. Cota
2015-09-10 13:49 ` Alex Bennée
2015-09-10 17:50 ` Emilio G. Cota
2015-09-21 5:01 ` Paolo Bonzini
2015-08-24 0:23 ` [Qemu-devel] [RFC 14/38] softmmu: add helpers to get ld/st physical addresses Emilio G. Cota
2015-08-24 2:02 ` Paolo Bonzini
2015-08-25 2:47 ` Emilio G. Cota
2015-08-24 0:23 ` [Qemu-devel] [RFC 15/38] radix-tree: add generic lockless radix tree module Emilio G. Cota
2015-09-10 14:25 ` Alex Bennée
2015-09-10 18:00 ` Emilio G. Cota
2015-08-24 0:23 ` [Qemu-devel] [RFC 16/38] aie: add module for Atomic Instruction Emulation Emilio G. Cota
2015-08-24 0:23 ` [Qemu-devel] [RFC 17/38] aie: add target helpers Emilio G. Cota
2015-09-17 15:14 ` Alex Bennée
2015-09-21 5:18 ` Paolo Bonzini
2015-09-21 20:59 ` Alex Bennée
2015-08-24 0:23 ` [Qemu-devel] [RFC 18/38] tcg: add fences Emilio G. Cota
2015-09-10 15:28 ` Alex Bennée
2015-08-24 0:23 ` [Qemu-devel] [RFC 19/38] tcg: add tcg_gen_smp_rmb() Emilio G. Cota
2015-09-10 16:01 ` Alex Bennée
2015-09-10 18:05 ` Emilio G. Cota
2015-08-24 0:23 ` [Qemu-devel] [RFC 20/38] tcg/i386: implement fences Emilio G. Cota
2015-08-24 1:32 ` Paolo Bonzini
2015-08-25 3:02 ` Emilio G. Cota
2015-08-25 22:55 ` Paolo Bonzini
2015-08-24 0:23 ` [Qemu-devel] [RFC 21/38] target-i386: emulate atomic instructions + barriers using AIE Emilio G. Cota
2015-09-17 15:30 ` Alex Bennée
2015-08-24 0:23 ` [Qemu-devel] [RFC 22/38] cpu: update interrupt_request atomically Emilio G. Cota
2015-08-24 1:09 ` Paolo Bonzini
2015-08-25 20:36 ` Emilio G. Cota
2015-08-25 22:52 ` Paolo Bonzini
2015-08-24 0:23 ` [Qemu-devel] [RFC 23/38] cpu-exec: grab iothread lock during interrupt handling Emilio G. Cota
2015-09-09 10:13 ` Paolo Bonzini
2015-08-24 0:23 ` [Qemu-devel] [RFC 24/38] cpu-exec: reset mmap_lock after exiting the CPU loop Emilio G. Cota
2015-08-24 2:01 ` Paolo Bonzini
2015-08-25 21:16 ` Emilio G. Cota
2015-08-24 0:23 ` [Qemu-devel] [RFC 25/38] cpu: add barriers around cpu->tcg_exit_req Emilio G. Cota
2015-08-24 2:01 ` Paolo Bonzini
2015-08-24 0:23 ` [Qemu-devel] [RFC 26/38] cpu: protect tb_jmp_cache with seqlock Emilio G. Cota
2015-08-24 1:14 ` Paolo Bonzini
2015-08-25 21:46 ` Emilio G. Cota
2015-08-25 22:49 ` Paolo Bonzini
2015-09-04 8:50 ` Paolo Bonzini
2015-09-04 10:04 ` Paolo Bonzini
2015-08-24 0:23 ` [Qemu-devel] [RFC 27/38] cpu-exec: convert tb_invalidated_flag into a per-TB flag Emilio G. Cota
2015-08-24 0:23 ` [Qemu-devel] [RFC 28/38] cpu-exec: use RCU to perform lockless TB lookups Emilio G. Cota
2015-08-24 0:23 ` [Qemu-devel] [RFC 29/38] tcg: export have_tb_lock Emilio G. Cota
2015-08-24 0:23 ` [Qemu-devel] [RFC 30/38] translate-all: add tb_lock assertions Emilio G. Cota
2015-08-24 0:24 ` [Qemu-devel] [RFC 31/38] cpu: protect l1_map with tb_lock in full-system mode Emilio G. Cota
2015-08-24 1:07 ` Paolo Bonzini
2015-08-25 21:54 ` Emilio G. Cota
2015-08-24 0:24 ` [Qemu-devel] [RFC 32/38] cpu list: convert to RCU QLIST Emilio G. Cota
2015-08-24 0:24 ` [Qemu-devel] [RFC 33/38] cpu: introduce cpu_tcg_sched_work to run work while other CPUs sleep Emilio G. Cota
2015-08-24 1:24 ` Paolo Bonzini
2015-08-25 22:18 ` Emilio G. Cota
2015-08-24 0:24 ` [Qemu-devel] [RFC 34/38] translate-all: use tcg_sched_work for tb_flush Emilio G. Cota
2015-08-24 0:24 ` [Qemu-devel] [RFC 35/38] cputlb: use cpu_tcg_sched_work for tlb_flush_all Emilio G. Cota
2015-08-24 1:29 ` Paolo Bonzini [this message]
2015-08-25 22:31 ` Emilio G. Cota
2015-08-26 0:25 ` Paolo Bonzini
2015-09-01 16:10 ` Alex Bennée
2015-09-01 19:38 ` Emilio G. Cota
2015-09-01 20:18 ` Peter Maydell
2015-08-24 0:24 ` [Qemu-devel] [RFC 36/38] cputlb: use tcg_sched_work for tlb_flush_page_all Emilio G. Cota
2015-08-24 0:24 ` [Qemu-devel] [RFC 37/38] cpus: remove async_run_safe_work_on_cpu Emilio G. Cota
2015-08-24 0:24 ` [Qemu-devel] [RFC 38/38] Revert "target-i386: yield to another VCPU on PAUSE" Emilio G. Cota
2015-08-24 1:29 ` Paolo Bonzini
2015-08-24 2:01 ` [Qemu-devel] [RFC 00/38] MTTCG: i386, user+system mode Paolo Bonzini
2015-08-25 22:36 ` Emilio G. Cota
2015-08-24 16:08 ` Artyom Tarasenko
2015-08-24 20:16 ` Emilio G. Cota
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55DA737D.6040509@redhat.com \
--to=pbonzini@redhat.com \
--cc=a.rigo@virtualopensystems.com \
--cc=alex.bennee@linaro.org \
--cc=cota@braap.org \
--cc=fred.konrad@greensocs.com \
--cc=guillaume.delbergue@greensocs.com \
--cc=mark.burton@greensocs.com \
--cc=mttcg@greensocs.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).