From: Jason Wang <jasowang@redhat.com>
To: Yuanhan Liu <yuanhan.liu@linux.intel.com>, qemu-devel@nongnu.org
Cc: mst@redhat.com, changchun.ouyang@intel.com
Subject: Re: [Qemu-devel] [PATCH 5/7] vhost_net: move vhost_net_set_vq_index ahead at vhost_net_init
Date: Thu, 10 Sep 2015 11:14:27 +0800 [thread overview]
Message-ID: <55F0F593.9030408@redhat.com> (raw)
In-Reply-To: <1441697927-16456-6-git-send-email-yuanhan.liu@linux.intel.com>
On 09/08/2015 03:38 PM, Yuanhan Liu wrote:
> So that we could use the `vq_index' as well in the vhost_net_init
> stage, which is required when adding vhost-user multiple-queue support,
> where we need the vq_index to indicate which queue pair we are gonna
> initiate.
>
> vhost-user has no multiple queue support yet, hence no queue_index set
> before. Here is a quick set to 0 at net_vhost_user_init() stage, and it
> will be set properly soon in the next patch.
>
> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
> ---
> hw/net/vhost_net.c | 16 +++++++---------
> net/vhost-user.c | 1 +
> 2 files changed, 8 insertions(+), 9 deletions(-)
>
> diff --git a/hw/net/vhost_net.c b/hw/net/vhost_net.c
> index f9441e9..141b557 100644
> --- a/hw/net/vhost_net.c
> +++ b/hw/net/vhost_net.c
> @@ -138,6 +138,11 @@ static int vhost_net_get_fd(NetClientState *backend)
> }
> }
>
> +static void vhost_net_set_vq_index(struct vhost_net *net, int vq_index)
> +{
> + net->dev.vq_index = vq_index;
> +}
> +
> struct vhost_net *vhost_net_init(VhostNetOptions *options)
> {
> int r;
> @@ -167,6 +172,8 @@ struct vhost_net *vhost_net_init(VhostNetOptions *options)
> }
> net->nc = options->net_backend;
>
> + vhost_net_set_vq_index(net, net->nc->queue_index * 2);
> +
This breaks vhost kernel multiqueue since queue_index was not
initialized at this time. We do this in set_netdev() instead of setting
it in each kind of netdev.
> net->dev.nvqs = 2;
> net->dev.vqs = net->vqs;
>
> @@ -196,11 +203,6 @@ fail:
> return NULL;
> }
>
> -static void vhost_net_set_vq_index(struct vhost_net *net, int vq_index)
> -{
> - net->dev.vq_index = vq_index;
> -}
> -
> static int vhost_net_set_vnet_endian(VirtIODevice *dev, NetClientState *peer,
> bool set)
> {
> @@ -325,10 +327,6 @@ int vhost_net_start(VirtIODevice *dev, NetClientState *ncs,
> goto err;
> }
>
> - for (i = 0; i < total_queues; i++) {
> - vhost_net_set_vq_index(get_vhost_net(ncs[i].peer), i * 2);
> - }
> -
> r = k->set_guest_notifiers(qbus->parent, total_queues * 2, true);
> if (r < 0) {
> error_report("Error binding guest notifier: %d", -r);
> diff --git a/net/vhost-user.c b/net/vhost-user.c
> index 93dcecd..2d6bbe5 100644
> --- a/net/vhost-user.c
> +++ b/net/vhost-user.c
> @@ -146,6 +146,7 @@ static int net_vhost_user_init(NetClientState *peer, const char *device,
> /* We don't provide a receive callback */
> s->nc.receive_disabled = 1;
> s->chr = chr;
> + nc->queue_index = 0;
>
Fail to understand why this is needed. It will be set to correct value
in set_netdev().
> qemu_chr_add_handlers(s->chr, NULL, NULL, net_vhost_user_event, s);
>
next prev parent reply other threads:[~2015-09-10 3:14 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-08 7:38 [Qemu-devel] [PATCH 0/7 v7] vhost-user multiple queue support Yuanhan Liu
2015-09-08 7:38 ` [Qemu-devel] [PATCH 1/7] vhost-user: use VHOST_USER_XXX macro for switch statement Yuanhan Liu
2015-09-08 7:38 ` [Qemu-devel] [PATCH 2/7] vhost-user: add protocol feature negotiation Yuanhan Liu
2015-09-08 7:38 ` [Qemu-devel] [PATCH 3/7] vhost: rename VHOST_RESET_OWNER to VHOST_RESET_DEVICE Yuanhan Liu
2015-09-08 7:38 ` [Qemu-devel] [PATCH 4/7] vhost-user: add VHOST_USER_GET_QUEUE_NUM message Yuanhan Liu
2015-09-08 7:38 ` [Qemu-devel] [PATCH 5/7] vhost_net: move vhost_net_set_vq_index ahead at vhost_net_init Yuanhan Liu
2015-09-10 3:14 ` Jason Wang [this message]
2015-09-10 3:57 ` Yuanhan Liu
2015-09-10 4:46 ` Jason Wang
2015-09-10 5:17 ` Yuanhan Liu
2015-09-10 5:52 ` Jason Wang
2015-09-10 6:18 ` Yuanhan Liu
2015-09-10 6:54 ` Jason Wang
2015-09-10 7:06 ` Yuanhan Liu
2015-09-14 5:49 ` Yuanhan Liu
2015-09-08 7:38 ` [Qemu-devel] [PATCH 6/7] vhost-user: add multiple queue support Yuanhan Liu
2015-09-08 21:22 ` Eric Blake
2015-09-09 1:47 ` Yuanhan Liu
2015-09-09 8:05 ` Ouyang, Changchun
2015-09-09 8:11 ` Yuanhan Liu
2015-09-09 12:18 ` Michael S. Tsirkin
2015-09-09 13:19 ` Yuanhan Liu
2015-09-09 20:55 ` Michael S. Tsirkin
2015-09-14 10:00 ` Jason Wang
2015-09-15 2:15 ` Yuanhan Liu
2015-09-08 7:38 ` [Qemu-devel] [PATCH 7/7] vhost-user: add a new message to disable/enable a specific virt queue Yuanhan Liu
2015-09-09 10:45 ` Michael S. Tsirkin
2015-09-09 13:38 ` Yuanhan Liu
2015-09-09 14:18 ` Michael S. Tsirkin
2015-09-09 20:55 ` Michael S. Tsirkin
2015-09-14 7:36 ` Yuanhan Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55F0F593.9030408@redhat.com \
--to=jasowang@redhat.com \
--cc=changchun.ouyang@intel.com \
--cc=mst@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=yuanhan.liu@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).